August 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] mptcp: fix NL PM announced address accounting" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 4b317e0eb287bd30a1b329513531157c25e8b692 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024080706-omnivore-undermost-43f1@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 4b317e0eb287 ("mptcp: fix NL PM announced address accounting") 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") 7d9bf018f907 ("selftests: mptcp: update output info of chk_rm_nr") 327b9a94e2a8 ("selftests: mptcp: more stable join tests-cases") 6bb3ab4913e9 ("selftests: mptcp: add MP_FAIL mibs check") f7713dd5d23a ("selftests: mptcp: delete uncontinuous removing ids") 4f49d63352da ("selftests: mptcp: add fullmesh testcases") 0cddb4a6f4e3 ("selftests: mptcp: add deny_join_id0 testcases") af66d3e1c3fa ("selftests: mptcp: enable checksum in mptcp_join.sh") 5e287fe76149 ("selftests: mptcp: remove id 0 address testcases") ef360019db40 ("selftests: mptcp: signal addresses testcases") efd13b71a3fa ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4b317e0eb287bd30a1b329513531157c25e8b692 Mon Sep 17 00:00:00 2001 From: Paolo Abeni <pabeni(a)redhat.com> Date: Sat, 27 Jul 2024 11:04:00 +0200 Subject: [PATCH] mptcp: fix NL PM announced address accounting Currently the per connection announced address counter is never decreased. As a consequence, after connection establishment, if the NL PM deletes an endpoint and adds a new/different one, no additional subflow is created for the new endpoint even if the current limits allow that. Address the issue properly updating the signaled address counter every time the NL PM removes such addresses. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable(a)vger.kernel.org Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index b399f2b7a369..f65831de5c1a 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1401,6 +1401,7 @@ static bool mptcp_pm_remove_anno_addr(struct mptcp_sock *msk, ret = remove_anno_list_by_saddr(msk, addr); if (ret || force) { spin_lock_bh(&msk->pm.lock); + msk->pm.add_addr_signaled -= ret; mptcp_pm_remove_addr(msk, &list); spin_unlock_bh(&msk->pm.lock); } @@ -1565,17 +1566,18 @@ static void mptcp_pm_remove_addrs_and_subflows(struct mptcp_sock *msk, struct mptcp_pm_addr_entry *entry; list_for_each_entry(entry, rm_list, list) { - if (lookup_subflow_by_saddr(&msk->conn_list, &entry->addr) && - slist.nr < MPTCP_RM_IDS_MAX) + if (slist.nr < MPTCP_RM_IDS_MAX && + lookup_subflow_by_saddr(&msk->conn_list, &entry->addr)) slist.ids[slist.nr++] = entry->addr.id; - if (remove_anno_list_by_saddr(msk, &entry->addr) && - alist.nr < MPTCP_RM_IDS_MAX) + if (alist.nr < MPTCP_RM_IDS_MAX && + remove_anno_list_by_saddr(msk, &entry->addr)) alist.ids[alist.nr++] = entry->addr.id; } if (alist.nr) { spin_lock_bh(&msk->pm.lock); + msk->pm.add_addr_signaled -= alist.nr; mptcp_pm_remove_addr(msk, &alist); spin_unlock_bh(&msk->pm.lock); }

8 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] mptcp: distinguish rcv vs sent backup flag in requests" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x efd340bf3d7779a3a8ec954d8ec0fb8a10f24982 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024080751-skinhead-underfoot-5a1f@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: efd340bf3d77 ("mptcp: distinguish rcv vs sent backup flag in requests") 967d3c27127e ("mptcp: fix data races on remote_id") a7cfe7766370 ("mptcp: fix data races on local_id") 84c531f54ad9 ("mptcp: userspace pm send RM_ADDR for ID 0") f1f26512a9bf ("mptcp: use plain bool instead of custom binary enum") 1e07938e29c5 ("net: mptcp: rename netlink handlers to mptcp_pm_nl_<blah>_{doit,dumpit}") 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops") fce68b03086f ("mptcp: add scheduled in mptcp_subflow_context") 1730b2b2c5a5 ("mptcp: add sched in mptcp_sock") 740ebe35bd3f ("mptcp: add struct mptcp_sched_ops") a7384f391875 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From efd340bf3d7779a3a8ec954d8ec0fb8a10f24982 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Sat, 27 Jul 2024 12:01:24 +0200 Subject: [PATCH] mptcp: distinguish rcv vs sent backup flag in requests When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow as 'backup' by setting the flag with the same name. Before this patch, the backup was set if the other peer set it in its MP_JOIN + SYN request. It is not correct: the backup flag should be set in the MPJ+SYN+ACK only if the host asks for it, and not mirroring what was done by the other peer. It is then required to have a dedicated bit for each direction, similar to what is done in the subflow context. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> diff --git a/net/mptcp/options.c b/net/mptcp/options.c index 8e8dcfbc2993..8a68382a4fe9 100644 --- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -909,7 +909,7 @@ bool mptcp_synack_options(const struct request_sock *req, unsigned int *size, return true; } else if (subflow_req->mp_join) { opts->suboptions = OPTION_MPTCP_MPJ_SYNACK; - opts->backup = subflow_req->backup; + opts->backup = subflow_req->request_bkup; opts->join_id = subflow_req->local_id; opts->thmac = subflow_req->thmac; opts->nonce = subflow_req->local_nonce; diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index b11a4e50d52b..b8b25124e7de 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -448,6 +448,7 @@ struct mptcp_subflow_request_sock { u16 mp_capable : 1, mp_join : 1, backup : 1, + request_bkup : 1, csum_reqd : 1, allow_join_id0 : 1; u8 local_id; diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 39e2cbdf3801..a3778aee4e77 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -2005,6 +2005,7 @@ static void subflow_ulp_clone(const struct request_sock *req, new_ctx->fully_established = 1; new_ctx->remote_key_valid = 1; new_ctx->backup = subflow_req->backup; + new_ctx->request_bkup = subflow_req->request_bkup; WRITE_ONCE(new_ctx->remote_id, subflow_req->remote_id); new_ctx->token = subflow_req->token; new_ctx->thmac = subflow_req->thmac;

8 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] mptcp: sched: check both directions for backup" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x b6a66e521a2032f7fcba2af5a9bcbaeaa19b7ca3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024080759-deploy-send-dfa5@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: b6a66e521a20 ("mptcp: sched: check both directions for backup") 3ce0852c86b9 ("mptcp: enforce HoL-blocking estimation") ff5a0b421cb2 ("mptcp: faster active backup recovery") 6da14d74e2bd ("mptcp: cleanup sysctl data and helpers") 1e1d9d6f119c ("mptcp: handle pending data on closed subflow") 71b7dec27f34 ("mptcp: less aggressive retransmission strategy") 33d41c9cd74c ("mptcp: more accurate timeout") d2f77960e5b0 ("mptcp: add sysctl allow_join_initial_addr_port") 8ce568ed06ce ("mptcp: drop tx skb cache") fc3c82eebf8e ("mptcp: add a new sysctl checksum_enabled") 752e906732c6 ("mptcp: add csum_enabled in mptcp_sock") 744ee14054c8 ("mptcp: restrict values of 'enabled' sysctl") 804c72eeecd2 ("mptcp: support SYSCTL only if enabled") ae514983f2e4 ("mptcp: remove redundant initialization in pm_nl_init_net()") 6876a18d3361 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b6a66e521a2032f7fcba2af5a9bcbaeaa19b7ca3 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Sat, 27 Jul 2024 12:01:23 +0200 Subject: [PATCH] mptcp: sched: check both directions for backup The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Before this patch, the scheduler was only looking at the 'backup' flag. That can make sense in some cases, but it looks like that's not what we wanted for the general use, because either the path-manager was setting both of them when sending an MP_PRIO, or the receiver was duplicating the 'backup' flag in the subflow request. Note that the use of these two flags in the path-manager are going to be fixed in the next commits, but this change here is needed not to modify the behaviour. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> diff --git a/include/trace/events/mptcp.h b/include/trace/events/mptcp.h index 09e72215b9f9..085b749cdd97 100644 --- a/include/trace/events/mptcp.h +++ b/include/trace/events/mptcp.h @@ -34,7 +34,7 @@ TRACE_EVENT(mptcp_subflow_get_send, struct sock *ssk; __entry->active = mptcp_subflow_active(subflow); - __entry->backup = subflow->backup; + __entry->backup = subflow->backup || subflow->request_bkup; if (subflow->tcp_sock && sk_fullsock(subflow->tcp_sock)) __entry->free = sk_stream_memory_free(subflow->tcp_sock); diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index a26c2c840fd9..a2fc54ed68c0 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1422,13 +1422,15 @@ struct sock *mptcp_subflow_get_send(struct mptcp_sock *msk) } mptcp_for_each_subflow(msk, subflow) { + bool backup = subflow->backup || subflow->request_bkup; + trace_mptcp_subflow_get_send(subflow); ssk = mptcp_subflow_tcp_sock(subflow); if (!mptcp_subflow_active(subflow)) continue; tout = max(tout, mptcp_timeout_from_subflow(subflow)); - nr_active += !subflow->backup; + nr_active += !backup; pace = subflow->avg_pacing_rate; if (unlikely(!pace)) { /* init pacing rate from socket */ @@ -1439,9 +1441,9 @@ struct sock *mptcp_subflow_get_send(struct mptcp_sock *msk) } linger_time = div_u64((u64)READ_ONCE(ssk->sk_wmem_queued) << 32, pace); - if (linger_time < send_info[subflow->backup].linger_time) { - send_info[subflow->backup].ssk = ssk; - send_info[subflow->backup].linger_time = linger_time; + if (linger_time < send_info[backup].linger_time) { + send_info[backup].ssk = ssk; + send_info[backup].linger_time = linger_time; } } __mptcp_set_timeout(sk, tout);

8 months, 2 weeks

2
1
0 0

[PATCH 4.19.y 00/14] arm64: errata: Speculative SSBS workaround

by Mark Rutland

Hi, This series is a v4.19-only backport (based on v4.19.319) of the upstream workaround for SSBS errata on Arm Ltd CPUs, as affected parts are likely to be used with stable kernels. The errata mean that an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. The upstream support was original posted as: * https://lore.kernel.org/linux-arm-kernel/20240508081400.235362-1-mark.rutla… "arm64: errata: Add workaround for Arm errata 3194386 and 3312417" Present in v6.10 * https://lore.kernel.org/linux-arm-kernel/20240603111812.1514101-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround" Present in v6.11-rc1 * https://lore.kernel.org/linux-arm-kernel/20240801101803.1982459-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround (again)" Present in v6.11-rc2 This backport applies the patches which are not present in v4.19.y, and as prerequisites backports the addition of spec_bar() and SB support, HWCAP detection based on user-visible id register values. and the addition of Neoverse-V2 MIDR values. I have tested the backport (when applied to v4.19.319), ensuring that the detection logic works and that the HWCAP and string in /proc/cpuinfo are both hidden when the relevant errata are detected. Mark. Besar Wicaksono (1): arm64: Add Neoverse-V2 part James Morse (1): arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space Mark Rutland (11): arm64: cputype: Add Cortex-X4 definitions arm64: cputype: Add Neoverse-V3 definitions arm64: errata: Add workaround for Arm errata 3194386 and 3312417 arm64: cputype: Add Cortex-X3 definitions arm64: cputype: Add Cortex-A720 definitions arm64: cputype: Add Cortex-X925 definitions arm64: errata: Unify speculative SSBS errata logic arm64: errata: Expand speculative SSBS workaround arm64: cputype: Add Cortex-X1C definitions arm64: cputype: Add Cortex-A725 definitions arm64: errata: Expand speculative SSBS workaround (again) Will Deacon (1): arm64: Add support for SB barrier and patch in over DSB; ISB sequences Documentation/arm64/silicon-errata.txt | 18 ++++++++ arch/arm64/Kconfig | 38 ++++++++++++++++ arch/arm64/include/asm/assembler.h | 13 ++++++ arch/arm64/include/asm/barrier.h | 4 ++ arch/arm64/include/asm/cpucaps.h | 4 +- arch/arm64/include/asm/cputype.h | 16 +++++++ arch/arm64/include/asm/sysreg.h | 6 +++ arch/arm64/include/asm/uaccess.h | 3 +- arch/arm64/include/uapi/asm/hwcap.h | 1 + arch/arm64/kernel/cpu_errata.c | 43 ++++++++++++++++++ arch/arm64/kernel/cpufeature.c | 61 ++++++++++++++++++++++---- arch/arm64/kernel/cpuinfo.c | 1 + 12 files changed, 197 insertions(+), 11 deletions(-) -- 2.30.2

8 months, 2 weeks

1
14
0 0

[PATCH 5.4.y 00/13] arm64: errata: Speculative SSBS workaround

by Mark Rutland

Hi, This series is a v5.4-only backport (based on v5.4.281) of the upstream workaround for SSBS errata on Arm Ltd CPUs, as affected parts are likely to be used with stable kernels. This does not apply to earlier stable trees, which will receive a separate backport. The errata mean that an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. The upstream support was original posted as: * https://lore.kernel.org/linux-arm-kernel/20240508081400.235362-1-mark.rutla… "arm64: errata: Add workaround for Arm errata 3194386 and 3312417" Present in v6.10 * https://lore.kernel.org/linux-arm-kernel/20240603111812.1514101-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround" Present in v6.11-rc1 * https://lore.kernel.org/linux-arm-kernel/20240801101803.1982459-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround (again)" Present in v6.11-rc2 This backport applies the patches which are not present in v5.4.y, and as prerequisites backports HWCAP detection based on user-visible id register values and the addition of Neoverse-V2 MIDR values. The spec_bar() macro exists in v5.4.y as its removal was not backported, and hence it doesn't need to be restored. I have tested the backport (when applied to v5.4.281), ensuring that the detection logic works and that the HWCAP and string in /proc/cpuinfo are both hidden when the relevant errata are detected. Mark. Besar Wicaksono (1): arm64: Add Neoverse-V2 part James Morse (1): arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space Mark Rutland (11): arm64: cputype: Add Cortex-X4 definitions arm64: cputype: Add Neoverse-V3 definitions arm64: errata: Add workaround for Arm errata 3194386 and 3312417 arm64: cputype: Add Cortex-X3 definitions arm64: cputype: Add Cortex-A720 definitions arm64: cputype: Add Cortex-X925 definitions arm64: errata: Unify speculative SSBS errata logic arm64: errata: Expand speculative SSBS workaround arm64: cputype: Add Cortex-X1C definitions arm64: cputype: Add Cortex-A725 definitions arm64: errata: Expand speculative SSBS workaround (again) Documentation/arm64/silicon-errata.rst | 36 +++++++++++++++++++ arch/arm64/Kconfig | 38 ++++++++++++++++++++ arch/arm64/include/asm/cpucaps.h | 3 +- arch/arm64/include/asm/cputype.h | 16 +++++++++ arch/arm64/kernel/cpu_errata.c | 44 +++++++++++++++++++++++ arch/arm64/kernel/cpufeature.c | 48 ++++++++++++++++++++++---- 6 files changed, 177 insertions(+), 8 deletions(-) -- 2.30.2

8 months, 2 weeks

1
13
0 0

[PATCH v1 32/41] idpf: fix memleak in vport interrupt configuration

by Santosh Sakore

From: Michal Kubiak <michal.kubiak(a)intel.com> The initialization of vport interrupt consists of two functions: 1) idpf_vport_intr_init() where a generic configuration is done 2) idpf_vport_intr_req_irq() where the irq for each q_vector is requested. The first function used to create a base name for each interrupt using "kasprintf()" call. Unfortunately, although that call allocated memory for a text buffer, that memory was never released. Fix this by removing creating the interrupt base name in 1). Instead, always create a full interrupt name in the function 2), because there is no need to create a base name separately, considering that the function 2) is never called out of idpf_vport_intr_init() context. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Cc: stable(a)vger.kernel.org # 6.7 Signed-off-by: Michal Kubiak <michal.kubiak(a)intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga(a)intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin(a)intel.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- drivers/net/ethernet/intel/idpf/idpf_txrx.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c index af2879f03b8d..a2f9f252694a 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c @@ -3780,13 +3780,15 @@ void idpf_vport_intr_update_itr_ena_irq(struct idpf_q_vector *q_vector) /** * idpf_vport_intr_req_irq - get MSI-X vectors from the OS for the vport * @vport: main vport structure - * @basename: name for the vector */ -static int idpf_vport_intr_req_irq(struct idpf_vport *vport, char *basename) +static int idpf_vport_intr_req_irq(struct idpf_vport *vport) { struct idpf_adapter *adapter = vport->adapter; + const char *drv_name, *if_name, *vec_name; int vector, err, irq_num, vidx; - const char *vec_name; + + drv_name = dev_driver_string(&adapter->pdev->dev); + if_name = netdev_name(vport->netdev); for (vector = 0; vector < vport->num_q_vectors; vector++) { struct idpf_q_vector *q_vector = &vport->q_vectors[vector]; @@ -3804,8 +3806,8 @@ static int idpf_vport_intr_req_irq(struct idpf_vport *vport, char *basename) else continue; - name = kasprintf(GFP_KERNEL, "%s-%s-%d", basename, vec_name, - vidx); + name = kasprintf(GFP_KERNEL, "%s-%s-%s-%d", drv_name, if_name, + vec_name, vidx); err = request_irq(irq_num, idpf_vport_intr_clean_queues, 0, name, q_vector); @@ -4326,7 +4328,6 @@ int idpf_vport_intr_alloc(struct idpf_vport *vport) */ int idpf_vport_intr_init(struct idpf_vport *vport) { - char *int_name; int err; err = idpf_vport_intr_init_vec_idx(vport); @@ -4340,11 +4341,7 @@ int idpf_vport_intr_init(struct idpf_vport *vport) if (err) goto unroll_vectors_alloc; - int_name = kasprintf(GFP_KERNEL, "%s-%s", - dev_driver_string(&vport->adapter->pdev->dev), - vport->netdev->name); - - err = idpf_vport_intr_req_irq(vport, int_name); + err = idpf_vport_intr_req_irq(vport); if (err) goto unroll_vectors_alloc; -- 2.17.1

8 months, 2 weeks

1
0
0 0

[PATCH v1 05/41] mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set

by Santosh Sakore

From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Up to the 'Fixes' commit, having an endpoint with both the 'signal' and 'subflow' flags, resulted in the creation of a subflow and an address announcement using the address linked to this endpoint. After this commit, only the address announcement was done, ignoring the 'subflow' flag. That's because the same bitmap is used for the two flags. It is OK to keep this single bitmap, the already selected local endpoint simply have to be re-used, but not via select_local_address() not to look at the just modified bitmap. Note that it is unusual to set the two flags together: creating a new subflow using a new local address will implicitly advertise it to the other peer. So in theory, no need to advertise it explicitly as well. Maybe there are use-cases -- the subflow might not reach the other peer that way, we can ask the other peer to try initiating the new subflow without delay -- or very likely the user is confused, and put both flags "just to be sure at least the right one is set". Still, if it is allowed, the kernel should do what has been asked: using this endpoint to announce the address and to create a new subflow from it. An alternative is to forbid the use of the two flags together, but that's probably too late, there are maybe use-cases, and it was working before. This patch will avoid people complaining subflows are not created using the endpoint they added with the 'subflow' and 'signal' flag. Note that with the current patch, the subflow might not be created in some corner cases, e.g. if the 'subflows' limit was reached when sending the ADD_ADDR, but changed later on. It is probably not worth splitting id_avail_bitmap per target ('signal', 'subflow'), which will add another large field to the msk "just" to track (again) endpoints. Anyway, currently when the limits are changed, the kernel doesn't check if new subflows can be created or removed, because we would need to keep track of the received ADD_ADDR, and more. It sounds OK to assume that the limits should be properly configured before establishing new connections. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable(a)vger.kernel.org Suggested-by: Paolo Abeni <pabeni(a)redhat.com> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- net/mptcp/pm_netlink.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 2be7af377cda..4cae2aa7be5c 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -512,8 +512,8 @@ __lookup_addr(struct pm_nl_pernet *pernet, const struct mptcp_addr_info *info) static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) { + struct mptcp_pm_addr_entry *local, *signal_and_subflow = NULL; struct sock *sk = (struct sock *)msk; - struct mptcp_pm_addr_entry *local; unsigned int add_addr_signal_max; unsigned int local_addr_max; struct pm_nl_pernet *pernet; @@ -579,6 +579,9 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) msk->pm.add_addr_signaled++; mptcp_pm_announce_addr(msk, &local->addr, false); mptcp_pm_nl_addr_send_ack(msk); + + if (local->flags & MPTCP_PM_ADDR_FLAG_SUBFLOW) + signal_and_subflow = local; } subflow: @@ -589,9 +592,14 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) bool fullmesh; int i, nr; - local = select_local_address(pernet, msk); - if (!local) - break; + if (signal_and_subflow) { + local = signal_and_subflow; + signal_and_subflow = NULL; + } else { + local = select_local_address(pernet, msk); + if (!local) + break; + } fullmesh = !!(local->flags & MPTCP_PM_ADDR_FLAG_FULLMESH); -- 2.17.1

8 months, 2 weeks

1
0
0 0

[PATCH v1 04/41] mptcp: pm: don't try to create sf if alloc failed

by Santosh Sakore

From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> It sounds better to avoid wasting cycles and / or put extreme memory pressure on the system by trying to create new subflows if it was not possible to add a new item in the announce list. While at it, a warning is now printed if the entry was already in the list as it should not happen with the in-kernel path-manager. With this PM, mptcp_pm_alloc_anno_list() should only fail in case of memory pressure. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable(a)vger.kernel.org Suggested-by: Paolo Abeni <pabeni(a)redhat.com> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- net/mptcp/pm_netlink.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 780f4cca165c..2be7af377cda 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -348,7 +348,7 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk, add_entry = mptcp_lookup_anno_list_by_saddr(msk, addr); if (add_entry) { - if (mptcp_pm_is_kernel(msk)) + if (WARN_ON_ONCE(mptcp_pm_is_kernel(msk))) return false; sk_reset_timer(sk, &add_entry->add_timer, @@ -555,8 +555,6 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) /* check first for announce */ if (msk->pm.add_addr_signaled < add_addr_signal_max) { - local = select_signal_address(pernet, msk); - /* due to racing events on both ends we can reach here while * previous add address is still running: if we invoke now * mptcp_pm_announce_addr(), that will fail and the @@ -567,11 +565,15 @@ static void mptcp_pm_create_subflow_or_signal_addr(struct mptcp_sock *msk) if (msk->pm.addr_signal & BIT(MPTCP_ADD_ADDR_SIGNAL)) return; + local = select_signal_address(pernet, msk); if (!local) goto subflow; + /* If the alloc fails, we are on memory pressure, not worth + * continuing, and trying to create subflows. + */ if (!mptcp_pm_alloc_anno_list(msk, &local->addr)) - goto subflow; + return; __clear_bit(local->addr.id, msk->pm.id_avail_bitmap); msk->pm.add_addr_signaled++; -- 2.17.1

8 months, 2 weeks

1
0
0 0

[PATCH v1 02/41] mptcp: pm: deny endp with signal + subflow + port

by Santosh Sakore

From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> As mentioned in the 'Fixes' commit, the port flag is only supported by the 'signal' flag, and not by the 'subflow' one. Then if both the 'signal' and 'subflow' flags are set, the problem is the same: the feature cannot work with the 'subflow' flag. Technically, if both the 'signal' and 'subflow' flags are set, it will be possible to create the listening socket, but not to establish a subflow using this source port. So better to explicitly deny it, not to create some confusions because the expected behaviour is not possible. Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags") Cc: stable(a)vger.kernel.org Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- net/mptcp/pm_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 37954a0b087d..c921d07e5940 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1328,8 +1328,8 @@ int mptcp_pm_nl_add_addr_doit(struct sk_buff *skb, struct genl_info *info) if (ret < 0) return ret; - if (addr.addr.port && !(addr.flags & MPTCP_PM_ADDR_FLAG_SIGNAL)) { - GENL_SET_ERR_MSG(info, "flags must have signal when using port"); + if (addr.addr.port && !address_use_port(&addr)) { + GENL_SET_ERR_MSG(info, "flags must have signal and not subflow when using port"); return -EINVAL; } -- 2.17.1

8 months, 2 weeks

1
0
0 0

[PATCH 5.10.y 00/13] arm64: errata: Speculative SSBS workaround

by Mark Rutland

Hi, This series is a v5.10-only backport (based on v5.10.223) of the upstream workaround for SSBS errata on Arm Ltd CPUs, as affected parts are likely to be used with stable kernels. This does not apply to earlier stable trees, which will receive a separate backport. The errata mean that an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. The upstream support was original posted as: * https://lore.kernel.org/linux-arm-kernel/20240508081400.235362-1-mark.rutla… "arm64: errata: Add workaround for Arm errata 3194386 and 3312417" Present in v6.10 * https://lore.kernel.org/linux-arm-kernel/20240603111812.1514101-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround" Present in v6.11-rc1 * https://lore.kernel.org/linux-arm-kernel/20240801101803.1982459-1-mark.rutl… "arm64: errata: Expand speculative SSBS workaround (again)" Present in v6.11-rc2 This backport applies the patches which are not present in v5.10.y, and as prerequisites backports HWCAP detection based on user-visible id register values and the addition of Neoverse-V2 MIDR values. The spec_bar() macro exists in v5.10.y as its removal was not backported, and hence it doesn't need to be restored. I have tested the backport (when applied to v5.10.223), ensuring that the detection logic works and that the HWCAP and string in /proc/cpuinfo are both hidden when the relevant errata are detected. Mark. Besar Wicaksono (1): arm64: Add Neoverse-V2 part James Morse (1): arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space Mark Rutland (11): arm64: cputype: Add Cortex-X4 definitions arm64: cputype: Add Neoverse-V3 definitions arm64: errata: Add workaround for Arm errata 3194386 and 3312417 arm64: cputype: Add Cortex-X3 definitions arm64: cputype: Add Cortex-A720 definitions arm64: cputype: Add Cortex-X925 definitions arm64: errata: Unify speculative SSBS errata logic arm64: errata: Expand speculative SSBS workaround arm64: cputype: Add Cortex-X1C definitions arm64: cputype: Add Cortex-A725 definitions arm64: errata: Expand speculative SSBS workaround (again) Documentation/arm64/silicon-errata.rst | 36 +++++++++++++++++++ arch/arm64/Kconfig | 38 ++++++++++++++++++++ arch/arm64/include/asm/cpucaps.h | 3 +- arch/arm64/include/asm/cputype.h | 16 +++++++++ arch/arm64/kernel/cpu_errata.c | 31 +++++++++++++++++ arch/arm64/kernel/cpufeature.c | 48 ++++++++++++++++++++++---- arch/arm64/kernel/proton-pack.c | 12 +++++++ 7 files changed, 176 insertions(+), 8 deletions(-) -- 2.30.2

8 months, 2 weeks

1
13
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2024