August 2024 - Linux-stable-mirror

[PATCH V4] mm/gup: Clear the LRU flag of a page before adding to LRU batch

by yangge1116＠126.com

From: yangge <yangge1116(a)126.com> If a large number of CMA memory are configured in system (for example, the CMA memory accounts for 50% of the system memory), starting a virtual virtual machine with device passthrough, it will call pin_user_pages_remote(..., FOLL_LONGTERM, ...) to pin memory. Normally if a page is present and in CMA area, pin_user_pages_remote() will migrate the page from CMA area to non-CMA area because of FOLL_LONGTERM flag. But the current code will cause the migration failure due to unexpected page refcounts, and eventually cause the virtual machine fail to start. If a page is added in LRU batch, its refcount increases one, remove the page from LRU batch decreases one. Page migration requires the page is not referenced by others except page mapping. Before migrating a page, we should try to drain the page from LRU batch in case the page is in it, however, folio_test_lru() is not sufficient to tell whether the page is in LRU batch or not, if the page is in LRU batch, the migration will fail. To solve the problem above, we modify the logic of adding to LRU batch. Before adding a page to LRU batch, we clear the LRU flag of the page so that we can check whether the page is in LRU batch by folio_test_lru(page). It's quite valuable, because likely we don't want to blindly drain the LRU batch simply because there is some unexpected reference on a page, as described above. This change makes the LRU flag of a page invisible for longer, which may impact some programs. For example, as long as a page is on a LRU batch, we cannot isolate it, and we cannot check if it's an LRU page. Further, a page can now only be on exactly one LRU batch. This doesn't seem to matter much, because a new page is allocated from buddy and added to the lru batch, or be isolated, it's LRU flag may also be invisible for a long time. Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region") Cc: <stable(a)vger.kernel.org> Signed-off-by: yangge <yangge1116(a)126.com> --- mm/swap.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) V4: Adjust commit message according to David's comments V3: Add fixes tag V2: Adjust code and commit message according to David's comments diff --git a/mm/swap.c b/mm/swap.c index dc205bd..9caf6b0 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -211,10 +211,6 @@ static void folio_batch_move_lru(struct folio_batch *fbatch, move_fn_t move_fn) for (i = 0; i < folio_batch_count(fbatch); i++) { struct folio *folio = fbatch->folios[i]; - /* block memcg migration while the folio moves between lru */ - if (move_fn != lru_add_fn && !folio_test_clear_lru(folio)) - continue; - folio_lruvec_relock_irqsave(folio, &lruvec, &flags); move_fn(lruvec, folio); @@ -255,11 +251,16 @@ static void lru_move_tail_fn(struct lruvec *lruvec, struct folio *folio) void folio_rotate_reclaimable(struct folio *folio) { if (!folio_test_locked(folio) && !folio_test_dirty(folio) && - !folio_test_unevictable(folio) && folio_test_lru(folio)) { + !folio_test_unevictable(folio)) { struct folio_batch *fbatch; unsigned long flags; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock_irqsave(&lru_rotate.lock, flags); fbatch = this_cpu_ptr(&lru_rotate.fbatch); folio_batch_add_and_move(fbatch, folio, lru_move_tail_fn); @@ -352,11 +353,15 @@ static void folio_activate_drain(int cpu) void folio_activate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_active(folio) && - !folio_test_unevictable(folio)) { + if (!folio_test_active(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.activate); folio_batch_add_and_move(fbatch, folio, folio_activate_fn); @@ -700,6 +705,11 @@ void deactivate_file_folio(struct folio *folio) return; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate_file); folio_batch_add_and_move(fbatch, folio, lru_deactivate_file_fn); @@ -716,11 +726,16 @@ void deactivate_file_folio(struct folio *folio) */ void folio_deactivate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_unevictable(folio) && - (folio_test_active(folio) || lru_gen_enabled())) { + if (!folio_test_unevictable(folio) && (folio_test_active(folio) || + lru_gen_enabled())) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate); folio_batch_add_and_move(fbatch, folio, lru_deactivate_fn); @@ -737,12 +752,16 @@ void folio_deactivate(struct folio *folio) */ void folio_mark_lazyfree(struct folio *folio) { - if (folio_test_lru(folio) && folio_test_anon(folio) && - folio_test_swapbacked(folio) && !folio_test_swapcache(folio) && - !folio_test_unevictable(folio)) { + if (folio_test_anon(folio) && folio_test_swapbacked(folio) && + !folio_test_swapcache(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_lazyfree); folio_batch_add_and_move(fbatch, folio, lru_lazyfree_fn); -- 2.7.4

1 week, 6 days

3
9
0 0

[PATCH 1/2] drm/i915: Schedule the HPD poll init work on an unbound workqueue

by Imre Deak

Disabling HPD polling from i915_hpd_poll_init_work() involves probing all display connectors explicitly to account for lost hotplug interrupts. On some platforms (mostly pre-ICL) with HDMI connectors the I2C EDID bit-banging using udelay() triggers in turn the workqueue: i915_hpd_poll_init_work [i915] hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND warning. Fix the above by scheduling i915_hpd_poll_init_work() on a WQ_UNBOUND workqueue. It's ok to use a system WQ, since i915_hpd_poll_init_work() is properly flushed in intel_hpd_cancel_work(). The connector probing from drm_mode_config::output_poll_work resulting in the same warning is fixed by the next patch. Cc: Tejun Heo <tj(a)kernel.org> Cc: Heiner Kallweit <hkallweit1(a)gmail.com> CC: stable(a)vger.kernel.org # 6.5 Suggested-by: Tejun Heo <tj(a)kernel.org> Suggested-by: Heiner Kallweit <hkallweit1(a)gmail.com> Reported-by: Heiner Kallweit <hkallweit1(a)gmail.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9245 Link: https://lore.kernel.org/all/f7e21caa-e98d-e5b5-932a-fe12d27fde9b@gmail.com Signed-off-by: Imre Deak <imre.deak(a)intel.com> --- drivers/gpu/drm/i915/display/intel_hotplug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c index e8562f6f8bb44..accc2fec562a0 100644 --- a/drivers/gpu/drm/i915/display/intel_hotplug.c +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c @@ -774,7 +774,7 @@ void intel_hpd_poll_enable(struct drm_i915_private *dev_priv) * As well, there's no issue if we race here since we always reschedule * this worker anyway */ - queue_work(dev_priv->unordered_wq, + queue_work(system_unbound_wq, &dev_priv->display.hotplug.poll_init_work); } @@ -803,7 +803,7 @@ void intel_hpd_poll_disable(struct drm_i915_private *dev_priv) return; WRITE_ONCE(dev_priv->display.hotplug.poll_enabled, false); - queue_work(dev_priv->unordered_wq, + queue_work(system_unbound_wq, &dev_priv->display.hotplug.poll_init_work); } -- 2.37.2

2 weeks, 2 days

4
5
0 0

[PATCH v1 1/1] mfd: rk8xx: Fix shutdown handler

by Sebastian Reichel

When I converted rk808 to device managed resources I converted the rk808 specific pm_power_off handler to devm_register_sys_off_handler() using SYS_OFF_MODE_POWER_OFF_PREPARE, which is allowed to sleep. I did this because the driver's poweroff function makes use of regmap and the backend of that might sleep. But the PMIC poweroff function will kill off the board power and the kernel does some extra steps after the prepare handler. Thus the prepare handler should not be used for the PMIC's poweroff routine. Instead the normal SYS_OFF_MODE_POWER_OFF phase should be used. The old pm_power_off method is also being called from there, so this would have been a cleaner conversion anyways. But it still makes sense to investigate the sleep handling and check if there are any issues. Apparently the Rockchip and Meson I2C drivers (the only platforms using the PMICs handled by this driver) both have support for atomic transfers and thus may be called from the proper poweroff context. Things are different on the SPI side. That is so far only used by rk806 and that one is only used by Rockchip RK3588. Unfortunately the Rockchip SPI driver does not support atomic transfers. That means using the normal POWER_OFF handler would introduce the following error splash during shutdown on all RK3588 boards currently supported upstream: [ 13.761353] ------------[ cut here ]------------ [ 13.761764] Voluntary context switch within RCU read-side critical section! [ 13.761776] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:330 rcu_note_context_switch+0x3ac/0x404 [ 13.763219] Modules linked in: [ 13.763498] CPU: 0 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.10.0-12284-g2818a9a19514 #1499 [ 13.764297] Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) [ 13.764812] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 13.765427] pc : rcu_note_context_switch+0x3ac/0x404 [ 13.765871] lr : rcu_note_context_switch+0x3ac/0x404 [ 13.766314] sp : ffff800084f4b5b0 [ 13.766609] x29: ffff800084f4b5b0 x28: ffff00040139b800 x27: 00007dfb4439ae80 [ 13.767245] x26: ffff00040139bc80 x25: 0000000000000000 x24: ffff800082118470 [ 13.767880] x23: 0000000000000000 x22: ffff000400300000 x21: ffff000400300000 [ 13.768515] x20: ffff800083a9d600 x19: ffff0004fee48600 x18: fffffffffffed448 [ 13.769151] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000048 [ 13.769787] x14: fffffffffffed490 x13: ffff80008473b3c0 x12: 0000000000000900 [ 13.770421] x11: 0000000000000300 x10: ffff800084797bc0 x9 : ffff80008473b3c0 [ 13.771057] x8 : 00000000ffffefff x7 : ffff8000847933c0 x6 : 0000000000000300 [ 13.771692] x5 : 0000000000000301 x4 : 40000000fffff300 x3 : 0000000000000000 [ 13.772328] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000400300000 [ 13.772964] Call trace: [ 13.773184] rcu_note_context_switch+0x3ac/0x404 [ 13.773598] __schedule+0x94/0xb0c [ 13.773907] schedule+0x34/0x104 [ 13.774198] schedule_timeout+0x84/0xfc [ 13.774544] wait_for_completion_timeout+0x78/0x14c [ 13.774980] spi_transfer_one_message+0x588/0x690 [ 13.775403] __spi_pump_transfer_message+0x19c/0x4ec [ 13.775846] __spi_sync+0x2a8/0x3c4 [ 13.776161] spi_write_then_read+0x120/0x208 [ 13.776543] rk806_spi_bus_read+0x54/0x88 [ 13.776905] _regmap_raw_read+0xec/0x16c [ 13.777257] _regmap_bus_read+0x44/0x7c [ 13.777601] _regmap_read+0x60/0xd8 [ 13.777915] _regmap_update_bits+0xf4/0x13c [ 13.778289] regmap_update_bits_base+0x64/0x98 [ 13.778686] rk808_power_off+0x70/0xfc [ 13.779024] sys_off_notify+0x40/0x6c [ 13.779356] atomic_notifier_call_chain+0x60/0x90 [ 13.779776] do_kernel_power_off+0x54/0x6c [ 13.780146] machine_power_off+0x18/0x24 [ 13.780499] kernel_power_off+0x70/0x7c [ 13.780845] __do_sys_reboot+0x210/0x270 [ 13.781198] __arm64_sys_reboot+0x24/0x30 [ 13.781558] invoke_syscall+0x48/0x10c [ 13.781897] el0_svc_common+0x3c/0xe8 [ 13.782228] do_el0_svc+0x20/0x2c [ 13.782528] el0_svc+0x34/0xd8 [ 13.782806] el0t_64_sync_handler+0x120/0x12c [ 13.783197] el0t_64_sync+0x190/0x194 [ 13.783527] ---[ end trace 0000000000000000 ]--- To avoid this we keep the SYS_OFF_MODE_POWER_OFF_PREPARE handler for the SPI backend. This is not great, but at least avoids regressions and the fix should be small enough to allow backporting. As a side-effect this also works around a shutdown problem on the Asus C201. For reasons unknown that skips calling the prepare handler and directly calls the final shutdown handler. Fixes: 4fec8a5a85c49 ("mfd: rk808: Convert to device managed resources") Cc: stable(a)vger.kernel.org Reported-by: Urja <urja(a)urja.dev> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com> --- drivers/mfd/rk8xx-core.c | 15 +++++++++++++-- drivers/mfd/rk8xx-i2c.c | 2 +- drivers/mfd/rk8xx-spi.c | 2 +- include/linux/mfd/rk808.h | 2 +- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c index 5eda3c0dbbdf..757ef8181328 100644 --- a/drivers/mfd/rk8xx-core.c +++ b/drivers/mfd/rk8xx-core.c @@ -692,10 +692,11 @@ void rk8xx_shutdown(struct device *dev) } EXPORT_SYMBOL_GPL(rk8xx_shutdown); -int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap) +int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap, bool is_spi) { struct rk808 *rk808; const struct rk808_reg_data *pre_init_reg; + enum sys_off_mode pwr_off_mode = SYS_OFF_MODE_POWER_OFF; const struct mfd_cell *cells; int dual_support = 0; int nr_pre_init_regs; @@ -785,10 +786,20 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap if (ret) return dev_err_probe(dev, ret, "failed to add MFD devices\n"); + /* + * Currently the Rockchip SPI driver always sleeps when doing SPI + * transfers. This is not allowed in the SYS_OFF_MODE_POWER_OFF + * handler, so we are using the prepare handler as a workaround. + * This should be removed once the Rockchip SPI driver has been + * adapted. + */ + if (is_spi) + pwr_off_mode = SYS_OFF_MODE_POWER_OFF_PREPARE; + if (device_property_read_bool(dev, "rockchip,system-power-controller") || device_property_read_bool(dev, "system-power-controller")) { ret = devm_register_sys_off_handler(dev, - SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH, + pwr_off_mode, SYS_OFF_PRIO_HIGH, &rk808_power_off, rk808); if (ret) return dev_err_probe(dev, ret, diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c index 69a6b297d723..a2029decd654 100644 --- a/drivers/mfd/rk8xx-i2c.c +++ b/drivers/mfd/rk8xx-i2c.c @@ -189,7 +189,7 @@ static int rk8xx_i2c_probe(struct i2c_client *client) return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap initialization failed\n"); - return rk8xx_probe(&client->dev, data->variant, client->irq, regmap); + return rk8xx_probe(&client->dev, data->variant, client->irq, regmap, false); } static void rk8xx_i2c_shutdown(struct i2c_client *client) diff --git a/drivers/mfd/rk8xx-spi.c b/drivers/mfd/rk8xx-spi.c index 3405fb82ff9f..20f9428f94bb 100644 --- a/drivers/mfd/rk8xx-spi.c +++ b/drivers/mfd/rk8xx-spi.c @@ -94,7 +94,7 @@ static int rk8xx_spi_probe(struct spi_device *spi) return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Failed to init regmap\n"); - return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap); + return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap, true); } static const struct of_device_id rk8xx_spi_of_match[] = { diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index 69cbea78b430..be15b84cff9e 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -1349,7 +1349,7 @@ struct rk808 { }; void rk8xx_shutdown(struct device *dev); -int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap); +int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap, bool is_spi); int rk8xx_suspend(struct device *dev); int rk8xx_resume(struct device *dev); -- 2.43.0

3 weeks, 6 days

8
12
0 0

[REGRESSION][BISECTED] Commit 60e3318e3e900 in stable/linux-6.1.y breaks cifs client failover to another server in DFS namespace

by Andrew Paniakin

Commit 60e3318e3e900 ("cifs: use fs_context for automounts") was released in v6.1.54 and broke the failover when one of the servers inside DFS becomes unavailable. We reproduced the problem on the EC2 instances of different types. Reverting aforementioned commint on top of the latest stable verison v6.1.94 helps to resolve the problem. Earliest working version is v6.2-rc1. There were two big merges of CIFS fixes: [1] and [2]. We would like to ask for the help to investigate this problem and if some of those patches need to be backported. Also, is it safe to just revert problematic commit until proper fixes/backports will be available? We will help to do testing and confirm if fix works, but let me also list the steps we used to reproduce the problem if it will help to identify the problem: 1. Create Active Directory domain eg. 'corp.fsxtest.local' in AWS Directory Service with: - three AWS FSX file systems filesystem1..filesystem3 - three Windows servers; They have DFS installed as per https://learn.microsoft.com/en-us/windows-server/storage/dfs-namespaces/dfs…: - dfs-srv1: EC2AMAZ-2EGTM59 - dfs-srv2: EC2AMAZ-1N36PRD - dfs-srv3: EC2AMAZ-0PAUH2U 2. Create DFS namespace eg. 'dfs-namespace' in Windows server 2008 mode and three folders targets in it: - referral-a mapped to filesystem1.corp.local - referral-b mapped to filesystem2.corp.local - referral-c mapped to filesystem3.corp.local - local folders dfs-srv1..dfs-srv3 in C:\DFSRoots\dfs-namespace of every Windows server. This helps to quickly define underlying server when DFS is mounted. 3. Enabled cifs debug logs: ``` echo 'module cifs +p' > /sys/kernel/debug/dynamic_debug/control echo 'file fs/cifs/* +p' > /sys/kernel/debug/dynamic_debug/control echo 7 > /proc/fs/cifs/cifsFYI ``` 4. Mount DFS namespace on Amazon Linux 2023 instance running any vanilla kernel v6.1.54+: ``` dmesg -c &>/dev/null cd /mnt mount -t cifs -o cred=/mnt/creds,echo_interval=5 \ //corp.fsxtest.local/dfs-namespace \ ./dfs-namespace ``` 5. List DFS root, it's also required to avoid recursive mounts that happen during regular 'ls' run: ``` sh -c 'ls dfs-namespace' dfs-srv2 referral-a referral-b ``` The DFS server is EC2AMAZ-1N36PRD, it's also listed in mount: ``` [root@ip-172-31-2-82 mnt]# mount | grep dfs //corp.fsxtest.local/dfs-namespace on /mnt/dfs-namespace type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.11.26,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) //EC2AMAZ-1N36PRD.corp.fsxtest.local/dfs-namespace/referral-a on /mnt/dfs-namespace/referral-a type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.12.80,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) ``` List files in first folder: ``` sh -c 'ls dfs-namespace/referral-a' filea.txt.txt ``` 6. Shutdown DFS server-2. List DFS root again, server changed from dfs-srv2 to dfs-srv1 EC2AMAZ-2EGTM59: ``` sh -c 'ls dfs-namespace' dfs-srv1 referral-a referral-b ``` 7. Try to list files in another folder, this causes ls to fail with error: ``` sh -c 'ls dfs-namespace/referral-b' ls: cannot access 'dfs-namespace/referral-b': No route to host``` Sometimes it's also 'Operation now in progress' error. mount shows the same output: ``` //corp.fsxtest.local/dfs-namespace on /mnt/dfs-namespace type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.11.26,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) //EC2AMAZ-1N36PRD.corp.fsxtest.local/dfs-namespace/referral-a on /mnt/dfs-namespace/referral-a type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.12.80,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) ``` I also attached kernel debug logs from this test. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Reported-by: Andrei Paniakin <apanyaki(a)amazon.com> Bisected-by: Simba Bonga <simbarb(a)amazon.com> --- #regzbot introduced: v6.1.54..v6.2-rc1

1 month, 1 week

3
11
0 0

Re: [PATCH 1/2] arm64: efi: Execute runtime services from a dedicated stack

by Lee Jones

On Mon, 05 Dec 2022, Ard Biesheuvel wrote: > With the introduction of PRMT in the ACPI subsystem, the EFI rts > workqueue is no longer the only caller of efi_call_virt_pointer() in the > kernel. This means the EFI runtime services lock is no longer sufficient > to manage concurrent calls into firmware, but also that firmware calls > may occur that are not marshalled via the workqueue mechanism, but > originate directly from the caller context. > > For added robustness, and to ensure that the runtime services have 8 KiB > of stack space available as per the EFI spec, introduce a spinlock > protected EFI runtime stack of 8 KiB, where the spinlock also ensures > serialization between the EFI rts workqueue (which itself serializes EFI > runtime calls) and other callers of efi_call_virt_pointer(). > > While at it, use the stack pivot to avoid reloading the shadow call > stack pointer from the ordinary stack, as doing so could produce a > gadget to defeat it. > > Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> > --- > arch/arm64/include/asm/efi.h | 3 +++ > arch/arm64/kernel/efi-rt-wrapper.S | 13 +++++++++- > arch/arm64/kernel/efi.c | 25 ++++++++++++++++++++ > 3 files changed, 40 insertions(+), 1 deletion(-) Could we have this in Stable please? Upstream commit: ff7a167961d1b ("arm64: efi: Execute runtime services from a dedicated stack") Ard, do we need Patch 2 as well, or can this be applied on its own? > diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h > index 7c12e01c2b312e7b..1c408ec3c8b3a883 100644 > --- a/arch/arm64/include/asm/efi.h > +++ b/arch/arm64/include/asm/efi.h > @@ -25,6 +25,7 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); > ({ \ > efi_virtmap_load(); \ > __efi_fpsimd_begin(); \ > + spin_lock(&efi_rt_lock); \ > }) > > #undef arch_efi_call_virt > @@ -33,10 +34,12 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); > > #define arch_efi_call_virt_teardown() \ > ({ \ > + spin_unlock(&efi_rt_lock); \ > __efi_fpsimd_end(); \ > efi_virtmap_unload(); \ > }) > > +extern spinlock_t efi_rt_lock; > efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...); > > #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) > diff --git a/arch/arm64/kernel/efi-rt-wrapper.S b/arch/arm64/kernel/efi-rt-wrapper.S > index 75691a2641c1c0f8..b2786b968fee68dd 100644 > --- a/arch/arm64/kernel/efi-rt-wrapper.S > +++ b/arch/arm64/kernel/efi-rt-wrapper.S > @@ -16,6 +16,12 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > */ > stp x1, x18, [sp, #16] > > + ldr_l x16, efi_rt_stack_top > + mov sp, x16 > +#ifdef CONFIG_SHADOW_CALL_STACK > + str x18, [sp, #-16]! > +#endif > + > /* > * We are lucky enough that no EFI runtime services take more than > * 5 arguments, so all are passed in registers rather than via the > @@ -29,6 +35,7 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > mov x4, x6 > blr x8 > > + mov sp, x29 > ldp x1, x2, [sp, #16] > cmp x2, x18 > ldp x29, x30, [sp], #32 > @@ -42,6 +49,10 @@ SYM_FUNC_START(__efi_rt_asm_wrapper) > * called with preemption disabled and a separate shadow stack is used > * for interrupts. > */ > - mov x18, x2 > +#ifdef CONFIG_SHADOW_CALL_STACK > + ldr_l x18, efi_rt_stack_top > + ldr x18, [x18, #-16] > +#endif > + > b efi_handle_corrupted_x18 // tail call > SYM_FUNC_END(__efi_rt_asm_wrapper) > diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c > index a908a37f03678b6b..8cb2e005f8aca589 100644 > --- a/arch/arm64/kernel/efi.c > +++ b/arch/arm64/kernel/efi.c > @@ -144,3 +144,28 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f) > pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f); > return s; > } > + > +DEFINE_SPINLOCK(efi_rt_lock); > + > +asmlinkage u64 *efi_rt_stack_top __ro_after_init; > + > +/* required by the EFI spec */ > +static_assert(THREAD_SIZE >= SZ_8K); > + > +int __init arm64_efi_rt_init(void) > +{ > + void *p = __vmalloc_node_range(THREAD_SIZE, THREAD_ALIGN, > + VMALLOC_START, VMALLOC_END, GFP_KERNEL, > + PAGE_KERNEL, 0, NUMA_NO_NODE, > + __builtin_return_address(0)); > + > + if (!p) { > + pr_warn("Failed to allocate EFI runtime stack\n"); > + clear_bit(EFI_RUNTIME_SERVICES, &efi.flags); > + return -ENOMEM; > + } > + > + efi_rt_stack_top = p + THREAD_SIZE; > + return 0; > +} > +core_initcall(arm64_efi_rt_init); > -- > 2.35.1 > > -- Lee Jones [李琼斯]

1 month, 2 weeks

6
13
0 0

[PATCH AUTOSEL 6.10 01/27] wifi: nl80211: disallow setting special AP channel widths

by Sasha Levin

From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 23daf1b4c91db9b26f8425cc7039cf96d22ccbfe ] Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that. Reported-by: syzbot+bc0f5b92cc7091f45fb6(a)syzkaller.appspotmail.com Link: https://msgid.link/20240515141600.d4a9590bfe32.I19a32d60097e81b527eafe6b092… Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/nl80211.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 72c7bf5585816..81d5bf186180f 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3419,6 +3419,33 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev, if (chandef.chan != cur_chan) return -EBUSY; + /* only allow this for regular channel widths */ + switch (wdev->links[link_id].ap.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + case NL80211_CHAN_WIDTH_320: + break; + default: + return -EINVAL; + } + + switch (chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + case NL80211_CHAN_WIDTH_320: + break; + default: + return -EINVAL; + } + result = rdev_set_ap_chanwidth(rdev, dev, link_id, &chandef); if (result) -- 2.43.0

1 month, 4 weeks

4
35
0 0

FAILED: patch "[PATCH] s390/dasd: Use correct lock while counting channel queue" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x ccc45cb4e7271c74dbb27776ae8f73d84557f5c6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023061111-tracing-shakiness-9054@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ccc45cb4e7271c74dbb27776ae8f73d84557f5c6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan=20H=C3=B6ppner?= <hoeppner(a)linux.ibm.com> Date: Fri, 9 Jun 2023 17:37:50 +0200 Subject: [PATCH] s390/dasd: Use correct lock while counting channel queue length MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The lock around counting the channel queue length in the BIODASDINFO ioctl was incorrectly changed to the dasd_block->queue_lock with commit 583d6535cb9d ("dasd: remove dead code"). This can lead to endless list iterations and a subsequent crash. The queue_lock is supposed to be used only for queue lists belonging to dasd_block. For dasd_device related queue lists the ccwdev lock must be used. Fix the mentioned issues by correctly using the ccwdev lock instead of the queue lock. Fixes: 583d6535cb9d ("dasd: remove dead code") Cc: stable(a)vger.kernel.org # v5.0+ Signed-off-by: Jan Höppner <hoeppner(a)linux.ibm.com> Reviewed-by: Stefan Haberland <sth(a)linux.ibm.com> Signed-off-by: Stefan Haberland <sth(a)linux.ibm.com> Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index 9327dcdd6e5e..8fca725b3dae 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -552,10 +552,10 @@ static int __dasd_ioctl_information(struct dasd_block *block, memcpy(dasd_info->type, base->discipline->name, 4); - spin_lock_irqsave(&block->queue_lock, flags); + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); list_for_each(l, &base->ccw_queue) dasd_info->chanq_len++; - spin_unlock_irqrestore(&block->queue_lock, flags); + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags); return 0; }

2 months

4
5
0 0

[PATCH] Revert "ext4: apply umask if ACL support is disabled"

by Max Kellermann

This reverts commit 484fd6c1de13b336806a967908a927cc0356e312. The commit caused a regression because now the umask was applied to symlinks and the fix is unnecessary because the umask/O_TMPFILE bug has been fixed somewhere else already. Fixes: https://lore.kernel.org/lkml/28DSITL9912E1.2LSZUVTGTO52Q@mforney.org/ Signed-off-by: Max Kellermann <max.kellermann(a)ionos.com> --- fs/ext4/acl.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h index ef4c19e5f570..0c5a79c3b5d4 100644 --- a/fs/ext4/acl.h +++ b/fs/ext4/acl.h @@ -68,11 +68,6 @@ extern int ext4_init_acl(handle_t *, struct inode *, struct inode *); static inline int ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) { - /* usually, the umask is applied by posix_acl_create(), but if - ext4 ACL support is disabled at compile time, we need to do - it here, because posix_acl_create() will never be called */ - inode->i_mode &= ~current_umask(); - return 0; } #endif /* CONFIG_EXT4_FS_POSIX_ACL */ -- 2.39.2

2 months

6
6
0 0

Re: [PATCH] wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion

by Aditya Garg

Hi wpa_supplicant 2.11 broke Wi-Fi on T2 Macs as well, but this patch doesn't seem to be fixing Wi-Fi. Instead, it's breaking it even on older 2.10 wpa_supplicant. Tested by a user on bcm4364b2 wifi chip with a WPA2-PSK [AES] network. dmesg output: However dmesg outputs more info [ 5.852978] usbcore: registered new interface driver brcmfmac [ 5.853114] brcmfmac 0000:01:00.0: enabling device (0000 -> 0002) [ 5.992212] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4364b2-pcie for chip BCM4364/3 [ 5.993923] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u-7.5-X0.bin failed with error -2 [ 5.993968] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u-7.5.bin failed with error -2 [ 5.994004] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u.bin failed with error -2 [ 5.994041] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN.bin failed with error -2 [ 5.994076] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-X0.bin failed with error -2 [ 6.162830] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 6.796637] brcmfmac: brcmf_c_process_txcap_blob: TxCap blob found, loading [ 6.798396] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4364/3 wl0: Jul 10 2023 12:30:19 version 9.30.503.0.32.5.92 FWID 01-88a8883 [ 6.885876] brcmfmac 0000:01:00.0 wlp1s0: renamed from wlan0 [ 8.195243] ieee80211 phy0: brcmf_p2p_set_firmware: failed to update device address ret -52 [ 8.196584] ieee80211 phy0: brcmf_p2p_create_p2pdev: set p2p_disc error [ 8.196588] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp1s0 type 10 failed: err=-52

2 months, 1 week

3
7
0 0

[PATCH v3] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs

by Krishna Kurapati

It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. Cc: <stable(a)vger.kernel.org> Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <quic_kriskura(a)quicinc.com> --- Link to v2: https://lore.kernel.org/all/20240131150332.1326523-1-quic_kriskura@quicinc.… Changes in v2: Added check to see if the padded byte is 0x00. Changes in v3: Removed wMaxPacketSize check from v2. drivers/usb/gadget/function/f_ncm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index ca5d5f564998..e2a059cfda2c 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1338,7 +1338,15 @@ static int ncm_unwrap_ntb(struct gether *port, "Parsed NTB with %d frames\n", dgram_counter); to_process -= block_len; - if (to_process != 0) { + + /* + * Windows NCM driver avoids USB ZLPs by adding a 1-byte + * zero pad as needed. + */ + if (to_process == 1 && + (*(unsigned char *)(ntb_ptr + block_len) == 0x00)) { + to_process--; + } else if (to_process > 0) { ntb_ptr = (unsigned char *)(ntb_ptr + block_len); goto parse_ntb; } -- 2.34.1

3 months, 1 week

3
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2024