July 2024 - Linux-stable-mirror

[PATCH AUTOSEL 6.1 01/14] nvme-multipath: find NUMA path only for online numa-node

by Sasha Levin

From: Nilay Shroff <nilay(a)linux.ibm.com> [ Upstream commit d3a043733f25d743f3aa617c7f82dbcb5ee2211a ] In current native multipath design when a shared namespace is created, we loop through each possible numa-node, calculate the NUMA distance of that node from each nvme controller and then cache the optimal IO path for future reference while sending IO. The issue with this design is that we may refer to the NUMA distance table for an offline node which may not be populated at the time and so we may inadvertently end up finding and caching a non-optimal path for IO. Then latter when the corresponding numa-node becomes online and hence the NUMA distance table entry for that node is created, ideally we should re-calculate the multipath node distance for the newly added node however that doesn't happen unless we rescan/reset the controller. So essentially, we may keep using non-optimal IO path for a node which is made online after namespace is created. This patch helps fix this issue ensuring that when a shared namespace is created, we calculate the multipath node distance for each online numa-node instead of each possible numa-node. Then latter when a node becomes online and we receive any IO on that newly added node, we would calculate the multipath node distance for newly added node but this time NUMA distance table would have been already populated for newly added node. Hence we would be able to correctly calculate the multipath node distance and choose the optimal path for the IO. Signed-off-by: Nilay Shroff <nilay(a)linux.ibm.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/nvme/host/multipath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index f96d330d39641..ead42a81cb352 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -558,7 +558,7 @@ static void nvme_mpath_set_live(struct nvme_ns *ns) int node, srcu_idx; srcu_idx = srcu_read_lock(&head->srcu); - for_each_node(node) + for_each_online_node(node) __nvme_find_path(head, node); srcu_read_unlock(&head->srcu, srcu_idx); } -- 2.43.0

9 months, 1 week

3
16
0 0

[PATCH AUTOSEL 6.6 01/12] ALSA: hda: cs35l56: Fix lifecycle of codec pointer

by Sasha Levin

From: Simon Trimmer <simont(a)opensource.cirrus.com> [ Upstream commit d339131bf02d4ed918415574082caf5e8af6e664 ] The codec should be cleared when the amp driver is unbound and when resuming it should be tested to prevent loading firmware into the device and ALSA in a partially configured system state. Signed-off-by: Simon Trimmer <simont(a)opensource.cirrus.com> Link: https://lore.kernel.org/r/20240531112716.25323-1-simont@opensource.cirrus.c… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/pci/hda/cs35l56_hda.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 15e20d9261393..77e8da7dffc6a 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -702,6 +702,8 @@ static void cs35l56_hda_unbind(struct device *dev, struct device *master, void * if (comps[cs35l56->index].dev == dev) memset(&comps[cs35l56->index], 0, sizeof(*comps)); + cs35l56->codec = NULL; + dev_dbg(cs35l56->base.dev, "Unbound\n"); } @@ -807,6 +809,9 @@ static int cs35l56_hda_system_resume(struct device *dev) cs35l56->suspended = false; + if (!cs35l56->codec) + return 0; + ret = cs35l56_is_fw_reload_needed(&cs35l56->base); dev_dbg(cs35l56->base.dev, "fw_reload_needed: %d\n", ret); if (ret > 0) { -- 2.43.0

9 months, 1 week

2
13
0 0

[PATCH AUTOSEL 6.9 01/40] workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string

by Sasha Levin

From: Tejun Heo <tj(a)kernel.org> [ Upstream commit 2a1b02bcba78f8498ab00d6142e1238d85b01591 ] Currently, worker ID formatting is open coded in create_worker(), init_rescuer() and worker_thread() (for %WORKER_DIE case). The formatted ID is saved into task->comm and wq_worker_comm() uses it as the base name to append extra information to when generating the name to be shown to userspace. However, TASK_COMM_LEN is only 16 leading to badly truncated names for rescuers. For example, the rescuer for the inet_frag_wq workqueue becomes: $ ps -ef | grep '[k]worker/R-inet' root 483 2 0 Apr26 ? 00:00:00 [kworker/R-inet_] Even for non-rescue workers, it's easy to run over 15 characters on moderately large machines. Fit it by consolidating worker ID formatting into a new helper format_worker_id() and calling it from wq_worker_comm() to obtain the untruncated worker ID string. $ ps -ef | grep '[k]worker/R-inet' root 60 2 0 12:10 ? 00:00:00 [kworker/R-inet_frag_wq] Signed-off-by: Tejun Heo <tj(a)kernel.org> Reported-and-tested-by: Jan Engelhardt <jengelh(a)inai.de> Suggested-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- kernel/workqueue.c | 51 ++++++++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 17 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index d2dbe099286b9..7634fc32ee05a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -124,6 +124,7 @@ enum wq_internal_consts { HIGHPRI_NICE_LEVEL = MIN_NICE, WQ_NAME_LEN = 32, + WORKER_ID_LEN = 10 + WQ_NAME_LEN, /* "kworker/R-" + WQ_NAME_LEN */ }; /* @@ -2778,6 +2779,26 @@ static void worker_detach_from_pool(struct worker *worker) complete(detach_completion); } +static int format_worker_id(char *buf, size_t size, struct worker *worker, + struct worker_pool *pool) +{ + if (worker->rescue_wq) + return scnprintf(buf, size, "kworker/R-%s", + worker->rescue_wq->name); + + if (pool) { + if (pool->cpu >= 0) + return scnprintf(buf, size, "kworker/%d:%d%s", + pool->cpu, worker->id, + pool->attrs->nice < 0 ? "H" : ""); + else + return scnprintf(buf, size, "kworker/u%d:%d", + pool->id, worker->id); + } else { + return scnprintf(buf, size, "kworker/dying"); + } +} + /** * create_worker - create a new workqueue worker * @pool: pool the new worker will belong to @@ -2794,7 +2815,6 @@ static struct worker *create_worker(struct worker_pool *pool) { struct worker *worker; int id; - char id_buf[23]; /* ID is needed to determine kthread name */ id = ida_alloc(&pool->worker_ida, GFP_KERNEL); @@ -2813,17 +2833,14 @@ static struct worker *create_worker(struct worker_pool *pool) worker->id = id; if (!(pool->flags & POOL_BH)) { - if (pool->cpu >= 0) - snprintf(id_buf, sizeof(id_buf), "%d:%d%s", pool->cpu, id, - pool->attrs->nice < 0 ? "H" : ""); - else - snprintf(id_buf, sizeof(id_buf), "u%d:%d", pool->id, id); + char id_buf[WORKER_ID_LEN]; + format_worker_id(id_buf, sizeof(id_buf), worker, pool); worker->task = kthread_create_on_node(worker_thread, worker, - pool->node, "kworker/%s", id_buf); + pool->node, "%s", id_buf); if (IS_ERR(worker->task)) { if (PTR_ERR(worker->task) == -EINTR) { - pr_err("workqueue: Interrupted when creating a worker thread \"kworker/%s\"\n", + pr_err("workqueue: Interrupted when creating a worker thread \"%s\"\n", id_buf); } else { pr_err_once("workqueue: Failed to create a worker thread: %pe", @@ -3386,7 +3403,6 @@ static int worker_thread(void *__worker) raw_spin_unlock_irq(&pool->lock); set_pf_worker(false); - set_task_comm(worker->task, "kworker/dying"); ida_free(&pool->worker_ida, worker->id); worker_detach_from_pool(worker); WARN_ON_ONCE(!list_empty(&worker->entry)); @@ -5430,6 +5446,7 @@ static int wq_clamp_max_active(int max_active, unsigned int flags, static int init_rescuer(struct workqueue_struct *wq) { struct worker *rescuer; + char id_buf[WORKER_ID_LEN]; int ret; if (!(wq->flags & WQ_MEM_RECLAIM)) @@ -5443,7 +5460,9 @@ static int init_rescuer(struct workqueue_struct *wq) } rescuer->rescue_wq = wq; - rescuer->task = kthread_create(rescuer_thread, rescuer, "kworker/R-%s", wq->name); + format_worker_id(id_buf, sizeof(id_buf), rescuer, NULL); + + rescuer->task = kthread_create(rescuer_thread, rescuer, "%s", id_buf); if (IS_ERR(rescuer->task)) { ret = PTR_ERR(rescuer->task); pr_err("workqueue: Failed to create a rescuer kthread for wq \"%s\": %pe", @@ -6272,19 +6291,15 @@ void show_freezable_workqueues(void) /* used to show worker information through /proc/PID/{comm,stat,status} */ void wq_worker_comm(char *buf, size_t size, struct task_struct *task) { - int off; - - /* always show the actual comm */ - off = strscpy(buf, task->comm, size); - if (off < 0) - return; - /* stabilize PF_WQ_WORKER and worker pool association */ mutex_lock(&wq_pool_attach_mutex); if (task->flags & PF_WQ_WORKER) { struct worker *worker = kthread_data(task); struct worker_pool *pool = worker->pool; + int off; + + off = format_worker_id(buf, size, worker, pool); if (pool) { raw_spin_lock_irq(&pool->lock); @@ -6303,6 +6318,8 @@ void wq_worker_comm(char *buf, size_t size, struct task_struct *task) } raw_spin_unlock_irq(&pool->lock); } + } else { + strscpy(buf, task->comm, size); } mutex_unlock(&wq_pool_attach_mutex); -- 2.43.0

9 months, 1 week

3
42
0 0

[PATCH AUTOSEL 5.4 01/11] Input: elantech - fix touchpad state on resume for Lenovo N24

by Sasha Levin

From: Jonathan Denose <jdenose(a)google.com> [ Upstream commit a69ce592cbe0417664bc5a075205aa75c2ec1273 ] The Lenovo N24 on resume becomes stuck in a state where it sends incorrect packets, causing elantech_packet_check_v4 to fail. The only way for the device to resume sending the correct packets is for it to be disabled and then re-enabled. This change adds a dmi check to trigger this behavior on resume. Signed-off-by: Jonathan Denose <jdenose(a)google.com> Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036… Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/input/mouse/elantech.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 9ff89bfda7a24..8e286e023916f 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1476,16 +1476,47 @@ static void elantech_disconnect(struct psmouse *psmouse) psmouse->private = NULL; } +/* + * Some hw_version 4 models fail to properly activate absolute mode on + * resume without going through disable/enable cycle. + */ +static const struct dmi_system_id elantech_needs_reenable[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Lenovo N24 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "81AF"), + }, + }, +#endif + { } +}; + /* * Put the touchpad back into absolute mode when reconnecting */ static int elantech_reconnect(struct psmouse *psmouse) { + int err; + psmouse_reset(psmouse); if (elantech_detect(psmouse, 0)) return -1; + if (dmi_check_system(elantech_needs_reenable)) { + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE); + if (err) + psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n", + psmouse->ps2dev.serio->phys, err); + + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); + if (err) + psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n", + psmouse->ps2dev.serio->phys, err); + } + if (elantech_set_absolute_mode(psmouse)) { psmouse_err(psmouse, "failed to put touchpad back into absolute mode.\n"); -- 2.43.0

9 months, 1 week

2
13
0 0

[PATCH AUTOSEL 6.9 01/22] clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs

by Sasha Levin

From: Gabor Juhos <j4g8y7(a)gmail.com> [ Upstream commit 2ba8425678af422da37b6c9b50e9ce66f0f55cae ] Since the CONFIG_CTL register is only 32 bits wide in the Stromer and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the IPQ5018 and IPQ5332 configurations are not used so remove those. No functional changes. Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com> Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav(a)quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio(a)linaro.org> Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gma… Signed-off-by: Bjorn Andersson <andersson(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/clk/qcom/apss-ipq-pll.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c index d7ab5bd5d4b41..e12bb9abf6b6a 100644 --- a/drivers/clk/qcom/apss-ipq-pll.c +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -100,7 +100,6 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = { static const struct alpha_pll_config ipq5018_pll_config = { .l = 0x2a, .config_ctl_val = 0x4001075b, - .config_ctl_hi_val = 0x304, .main_output_mask = BIT(0), .aux_output_mask = BIT(1), .early_output_mask = BIT(3), @@ -114,7 +113,6 @@ static const struct alpha_pll_config ipq5018_pll_config = { static const struct alpha_pll_config ipq5332_pll_config = { .l = 0x2d, .config_ctl_val = 0x4001075b, - .config_ctl_hi_val = 0x304, .main_output_mask = BIT(0), .aux_output_mask = BIT(1), .early_output_mask = BIT(3), -- 2.43.0

9 months, 1 week

4
26
0 0

[PATCH v2] dmaengine: moxart: handle irq_of_parse_and_map() errors

by Ma Ke

Zero and negative number is not a valid IRQ for in-kernel code and the irq_of_parse_and_map() function returns zero on error. So this check for valid IRQs should only accept values > 0. Cc: stable(a)vger.kernel.org Fixes: 2d9e31b9412c ("dmaengine: moxart: remove NO_IRQ") Signed-off-by: Ma Ke <make24(a)iscas.ac.cn> --- Changes in v2: - added Cc stable line; - added Fixes line. --- drivers/dma/moxart-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/moxart-dma.c b/drivers/dma/moxart-dma.c index c48d68cbff92..0690ccab431d 100644 --- a/drivers/dma/moxart-dma.c +++ b/drivers/dma/moxart-dma.c @@ -573,7 +573,7 @@ static int moxart_probe(struct platform_device *pdev) return -ENOMEM; irq = irq_of_parse_and_map(node, 0); - if (!irq) { + if (irq <= 0) { dev_err(dev, "no IRQ resource\n"); return -EINVAL; } -- 2.25.1

9 months, 1 week

1
0
0 0

5.15.x: randomize_layout_plugin.c: 'last_stmt' was not declared in this scope?

by Thomas Meyer

Good day, I wanted to upgrade my kernel to the latest 5.15.162 but it seems to fail with this error message after upgrading to fedora 40, any ideas what could be the problem? $ make HOSTCXX scripts/gcc-plugins/randomize_layout_plugin.so scripts/gcc-plugins/randomize_layout_plugin.c: In function 'bool dominated_by_is_err(const_tree, basic_block)': scripts/gcc-plugins/randomize_layout_plugin.c:693:20: error: 'last_stmt' was not declared in this scope; did you mean 'call_stmt'? 693 | dom_stmt = last_stmt(dom); | ^~~~~~~~~ | call_stmt make[2]: *** [scripts/gcc-plugins/Makefile:48: scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 make[1]: *** [scripts/Makefile.build:552: scripts/gcc-plugins] Error 2 make: *** [Makefile:1246: scripts] Error 2 Maybe a problem with gcc 14? My current kernel was compiled with gcc 13: [ 0.000000] [ T0] Linux version 5.15.160 (thomas2(a)localhost.localdomain) (gcc (GCC) 13.3.1 20240522 (Red Hat 13.3.1-1), GNU ld version 2.40-14.fc39) #15 PREEMPT Sat Jun 1 16:54:27 CEST 2024 $ gcc --version gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4) any help appreciated. with kind regards thomas PS: please cc my as I'm not subscribed to the list.

9 months, 1 week

2
3
0 0

[PATCH] media: uvcvideo: Fix custom control mapping probing

by Ricardo Ribalda

Custom control mapping introduced a bug, where the filter function was applied to every single control. Fix it so it is only applied to the matching controls. Reported-by: Paul Menzen <pmenzel(a)molgen.mpg.de> Closes: https://lore.kernel.org/linux-media/518cd6b4-68a8-4895-b8fc-97d4dae1ddc4@mo… Cc: stable(a)vger.kernel.org Fixes: 8f4362a8d42b ("media: uvcvideo: Allow custom control mapping") Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org> --- Paul, could you check if this fixes your issue, thanks! --- drivers/media/usb/uvc/uvc_ctrl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index 0136df5732ba..06fede57bf36 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -2680,6 +2680,10 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain, for (i = 0; i < ARRAY_SIZE(uvc_ctrl_mappings); ++i) { const struct uvc_control_mapping *mapping = &uvc_ctrl_mappings[i]; + if (!(uvc_entity_match_guid(ctrl->entity, mapping->entity) && + ctrl->info.selector == mapping->selector)) + continue; + /* Let the device provide a custom mapping. */ if (mapping->filter_mapping) { mapping = mapping->filter_mapping(chain, ctrl); @@ -2687,9 +2691,7 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain, continue; } - if (uvc_entity_match_guid(ctrl->entity, mapping->entity) && - ctrl->info.selector == mapping->selector) - __uvc_ctrl_add_mapping(chain, ctrl, mapping); + __uvc_ctrl_add_mapping(chain, ctrl, mapping); } } --- base-commit: 68a72104cbcf38ad16500216e213fa4eb21c4be2 change-id: 20240722-fix-filter-mapping-18477dc69048 Best regards, -- Ricardo Ribalda <ribalda(a)chromium.org>

9 months, 1 week

3
4
0 0

[PATCH v2 3/8] arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP

by Johan Hovold

Add the missing PCIe CX performance level votes to avoid relying on other drivers (e.g. USB) to maintain the nominal performance level required for Gen3 speeds. Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes") Cc: stable(a)vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 07e00f1d1768..2c10532d4f60 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -2974,6 +2974,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, "link_down"; power-domains = <&gcc GCC_PCIE_6A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie6a_phy>; phy-names = "pciephy"; @@ -3095,6 +3096,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, "link_down"; power-domains = <&gcc GCC_PCIE_4_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie4_phy>; phy-names = "pciephy"; -- 2.44.2

9 months, 1 week

2
1
0 0

[PATCH 04/12] arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpios

by Johan Hovold

Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config. Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support") Cc: stable(a)vger.kernel.org # 6.9 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 998e5ea2f52e..786285af9f33 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -572,6 +572,12 @@ &mdss_dp3_phy { }; &pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + status = "okay"; }; @@ -665,6 +671,29 @@ nvme_reg_en: nvme-reg-en-state { bias-disable; }; + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { clkreq-n-pins { pins = "gpio153"; -- 2.44.2

9 months, 1 week

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2024