May 2024 - Linux-stable-mirror

Please apply "drm/i915/hwmon: Get rid of devm" to stable trees (Option 2)

by Dixit, Ashutosh

Patch subject: drm/i915/hwmon: Get rid of devm Commit ID: 5bc9de065b8bb9b8dd8799ecb4592d0403b54281 Reason: Fixes potential kernel crash listed in https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10366 Kernel versions: 6.2 and later

7 months

2
1
0 0

Request for backporting of two drm patches

by Shradha Gupta

Hi all, Can you please pick up the following two drm patches to linux-5.15.y and newer? As these bugs affect these kernel versions too List of patches to be backported Patch 1: 5abffb66d12bcac84bf7b66389c571b8bb6e82bd drm: Check output polling initialized before disabling Patch 2: 048a36d8a6085bbd8ab9e5794b713b92ac986450 drm: Check polling initialized before enabling in drm_helper_probe_single_connector_modes These however do not apply cleanly on the 5.15.y branch, so I am also attaching rebased versions of these patches in the mail Thanks and Regards, Shradha.

7 months

2
2
0 0

[PATCH] dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

by Joy Zou

Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement that both source and destination addresses need pass through the IOMMU. Typically, peripheral FIFO addresses bypass the IOMMU, necessitating only one of the source or destination to go through it. Set "is_remote" to true to ensure both source and destination addresses pass through the IOMMU. iMX8 Spec define "Local" and "Remote" bus as below. Local bus: bypass IOMMU to directly access other peripheral register, such as FIFO. Remote bus: go through IOMMU to access system memory. The test fail log as follow: [ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0) [ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0) Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Joy Zou <joy.zou(a)nxp.com> Cc: stable(a)vger.kernel.org --- drivers/dma/fsl-edma-common.c | 3 +++ drivers/dma/fsl-edma-common.h | 1 + drivers/dma/fsl-edma-main.c | 2 +- 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index d62f5f452a43..7accee488856 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -756,6 +756,8 @@ struct dma_async_tx_descriptor *fsl_edma_prep_memcpy(struct dma_chan *chan, fsl_desc->iscyclic = false; fsl_chan->is_sw = true; + if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_MEM_REMOTE) + fsl_chan->is_remote = true; /* To match with copy_align and max_seg_size so 1 tcd is enough */ fsl_edma_fill_tcd(fsl_chan, fsl_desc->tcd[0].vtcd, dma_src, dma_dst, @@ -835,6 +837,7 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan) fsl_chan->tcd_pool = NULL; fsl_chan->is_sw = false; fsl_chan->srcid = 0; + fsl_chan->is_remote = false; if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK) clk_disable_unprepare(fsl_chan->clk); } diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h index 3f93ebb890b3..cc15c1a145eb 100644 --- a/drivers/dma/fsl-edma-common.h +++ b/drivers/dma/fsl-edma-common.h @@ -194,6 +194,7 @@ struct fsl_edma_desc { #define FSL_EDMA_DRV_HAS_PD BIT(5) #define FSL_EDMA_DRV_HAS_CHCLK BIT(6) #define FSL_EDMA_DRV_HAS_CHMUX BIT(7) +#define FSL_EDMA_DRV_MEM_REMOTE BIT(8) /* control and status register is in tcd address space, edma3 reg layout */ #define FSL_EDMA_DRV_SPLIT_REG BIT(9) #define FSL_EDMA_DRV_BUS_8BYTE BIT(10) diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c index 391e4f13dfeb..43d84cfefbe2 100644 --- a/drivers/dma/fsl-edma-main.c +++ b/drivers/dma/fsl-edma-main.c @@ -342,7 +342,7 @@ static struct fsl_edma_drvdata imx7ulp_data = { }; static struct fsl_edma_drvdata imx8qm_data = { - .flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3, + .flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE, .chreg_space_sz = 0x10000, .chreg_off = 0x10000, .setup_irq = fsl_edma3_irq_init, -- 2.37.1

7 months

3
2
0 0

[PATCH] dt-bindings: dma: fsl-edma: fix dma-channels constraints

by Krzysztof Kozlowski

dma-channels is a number, not a list. Apply proper constraints on the actual number. Fixes: 6eb439dff645 ("dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/dma/fsl,edma.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index 825f4715499e..9ef99eb54104 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -60,8 +60,8 @@ properties: - 3 dma-channels: - minItems: 1 - maxItems: 64 + minimum: 1 + maximum: 64 clocks: minItems: 1 -- 2.43.0

7 months

4
3
0 0

[PATCH v2] Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot

by Zijun Hu

Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") will cause below regression issue: BT can't be enabled after below steps: cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure if property enable-gpios is not configured within DT|ACPI for QCA6390. The commit is to fix a use-after-free issue within qca_serdev_shutdown() by adding condition to avoid the serdev is flushed or wrote after closed but also introduces this regression issue regarding above steps since the VSC is not sent to reset controller during warm reboot. Fixed by sending the VSC to reset controller within qca_serdev_shutdown() once BT was ever enabled, and the use-after-free issue is also fixed by this change since the serdev is still opened before it is flushed or wrote. Verified by the reported machine Dell XPS 13 9310 laptop over below two kernel commits: commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of bluetooth-next tree. commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump implementation for QCA") of linus mainline tree. Fixes: 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed serdev") Cc: stable(a)vger.kernel.org Reported-by: Wren Turkal <wt(a)penguintechs.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218726 Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> Tested-by: Wren Turkal <wt(a)penguintechs.org> --- V1 -> V2: Add comments and more commit messages V1 discussion link: https://lore.kernel.org/linux-bluetooth/d553edef-c1a4-4d52-a892-715549d31eb… drivers/bluetooth/hci_qca.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 0c9c9ee56592..9a0bc86f9aac 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -2450,15 +2450,27 @@ static void qca_serdev_shutdown(struct device *dev) struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); struct hci_uart *hu = &qcadev->serdev_hu; struct hci_dev *hdev = hu->hdev; - struct qca_data *qca = hu->priv; const u8 ibs_wake_cmd[] = { 0xFD }; const u8 edl_reset_soc_cmd[] = { 0x01, 0x00, 0xFC, 0x01, 0x05 }; if (qcadev->btsoc_type == QCA_QCA6390) { - if (test_bit(QCA_BT_OFF, &qca->flags) || - !test_bit(HCI_RUNNING, &hdev->flags)) + /* The purpose of sending the VSC is to reset SOC into a initial + * state and the state will ensure next hdev->setup() success. + * if HCI_QUIRK_NON_PERSISTENT_SETUP is set, it means that + * hdev->setup() can do its job regardless of SoC state, so + * don't need to send the VSC. + * if HCI_SETUP is set, it means that hdev->setup() was never + * invoked and the SOC is already in the initial state, so + * don't also need to send the VSC. + */ + if (test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks) || + hci_dev_test_flag(hdev, HCI_SETUP)) return; + /* The serdev must be in open state when conrol logic arrives + * here, so also fix the use-after-free issue caused by that + * the serdev is flushed or wrote after it is closed. + */ serdev_device_write_flush(serdev); ret = serdev_device_write_buf(serdev, ibs_wake_cmd, sizeof(ibs_wake_cmd)); -- 2.7.4

7 months

6
24
0 0

[PATCH v3] kobject_uevent: Fix OOB access within zap_modalias_env()

by Zijun Hu

zap_modalias_env() wrongly calculates size of memory block to move, so will cause OOB memory access issue if variable MODALIAS is not the last one within its @env parameter, fixed by correcting size to memmove. Fixes: 9b3fa47d4a76 ("kobject: fix suppressing modalias in uevents delivered over netlink") Cc: stable(a)vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> --- V3: Correct inline comments and take Dmitry's suggestion V2: Correct commit messages and add inline comments Previous discussion links: https://lore.kernel.org/lkml/ZlYo20ztfLWPyy5d@google.com/ https://lore.kernel.org/lkml/0b916393-eb39-4467-9c99-ac1bc9746512@quicinc.c… lib/kobject_uevent.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 03b427e2707e..b7f2fa08d9c8 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -433,8 +433,23 @@ static void zap_modalias_env(struct kobj_uevent_env *env) len = strlen(env->envp[i]) + 1; if (i != env->envp_idx - 1) { + /* @env->envp[] contains pointers to @env->buf[] + * with @env->buflen chars, and we are removing + * variable MODALIAS here pointed by @env->envp[i] + * with length @len as shown below: + * + * 0 @env->buf[] @env->buflen + * --------------------------------------------- + * ^ ^ ^ ^ + * | |-> @len <-| target block | + * @env->envp[0] @env->envp[i] @env->envp[i + 1] + * + * so the "target block" indicated above is moved + * backward by @len, and its right size is + * @env->buflen - (@env->envp[i + 1] - @env->envp[0]). + */ memmove(env->envp[i], env->envp[i + 1], - env->buflen - len); + env->buflen - (env->envp[i + 1] - env->envp[0])); for (j = i; j < env->envp_idx - 1; j++) env->envp[j] = env->envp[j + 1] - len; -- 2.7.4

7 months

2
1
0 0

[PATCH 1/4] drm/exynos/vidi: fix memory leak in .get_modes()

by Jani Nikula

The duplicated EDID is never freed. Fix it. Cc: stable(a)vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> --- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index fab135308b70..11a720fef32b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -309,6 +309,7 @@ static int vidi_get_modes(struct drm_connector *connector) struct vidi_context *ctx = ctx_from_connector(connector); struct edid *edid; int edid_len; + int count; /* * the edid data comes from user side and it would be set @@ -328,7 +329,11 @@ static int vidi_get_modes(struct drm_connector *connector) drm_connector_update_edid_property(connector, edid); - return drm_add_edid_modes(connector, edid); + count = drm_add_edid_modes(connector, edid); + + kfree(edid); + + return count; } static const struct drm_connector_helper_funcs vidi_connector_helper_funcs = { -- 2.39.2

7 months

2
1
0 0

[PATCH v3 1/2] drm/rockchip: vop: clear DMA stop bit upon vblank on RK3066

by Val Packett

The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame and needs the driver to acknowledge that by clearing the bit. So unless we clear it "between" frames, the RGB output only shows noise instead of the picture. vblank seems to be the most appropriate place to do it, since it indicates exactly that: that the hardware is done with the frame. This seems to be a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block. Fixes: f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable(a)vger.kernel.org Signed-off-by: Val Packett <val(a)packett.cool> --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 + drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 + 3 files changed, 8 insertions(+) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index a13473b2d..2731fe2b2 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1766,6 +1766,12 @@ static void vop_handle_vblank(struct vop *vop) } spin_unlock(&drm->event_lock); + if (VOP_HAS_REG(vop, common, dma_stop)) { + spin_lock(&vop->reg_lock); + VOP_REG_SET(vop, common, dma_stop, 0); + spin_unlock(&vop->reg_lock); + } + if (test_and_clear_bit(VOP_PENDING_FB_UNREF, &vop->pending)) drm_flip_work_commit(&vop->fb_unref_work, system_unbound_wq); } diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h index b33e5bdc2..0cf512cc1 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h @@ -122,6 +122,7 @@ struct vop_common { struct vop_reg lut_buffer_index; struct vop_reg gate_en; struct vop_reg mmu_en; + struct vop_reg dma_stop; struct vop_reg out_mode; struct vop_reg standby; }; diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c index b9ee02061..9bcb40a64 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = { }; static const struct vop_common rk3066_common = { + .dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0), .standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1), .out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0), .cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0), -- 2.45.1

7 months

2
3
0 0

[PATCH v2 08/14] pinctrl: qcom: spmi-gpio: drop broken pm8008 support

by Johan Hovold

The SPMI GPIO driver assumes that the parent device is an SPMI device and accesses random data when backcasting the parent struct device pointer for non-SPMI devices. Fortunately this does not seem to cause any issues currently when the parent device is an I2C client like the PM8008, but this could change if the structures are reorganised (e.g. using structure randomisation). Notably the interrupt implementation is also broken for non-SPMI devices. Also note that the two GPIO pins on PM8008 are used for interrupts and reset so their practical use should be limited. Drop the broken GPIO support for PM8008 for now. Fixes: ea119e5a482a ("pinctrl: qcom-pmic-gpio: Add support for pm8008") Cc: stable(a)vger.kernel.org # 5.13 Reviewed-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org> Reviewed-by: Stephen Boyd <swboyd(a)chromium.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index f4e2c88a7c82..e61be7d05494 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1206,7 +1206,6 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 }, { .compatible = "qcom,pm7550ba-gpio", .data = (void *) 8}, { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 }, { .compatible = "qcom,pm8019-gpio", .data = (void *) 6 }, /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, -- 2.44.1

7 months, 1 week

2
1
0 0

[PATCH] ACPI: x86: Force StorageD3Enable on more products

by Mario Limonciello

A Rembrandt-based HP thin client is reported to have problems where the NVME disk isn't present after resume from s2idle. This is because the NVME disk wasn't put into D3 at suspend, and that happened because the StorageD3Enable _DSD was missing in the BIOS. As AMD's architecture requires that the NVME is in D3 for s2idle, adjust the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT advertises low power idle support. This will ensure that any future products with this BIOS deficiency don't need to be added to the allow list of overrides. Cc: stable(a)vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com> --- drivers/acpi/x86/utils.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index 90c3d2eab9e9..7507a7706898 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -197,16 +197,16 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s } /* - * AMD systems from Renoir and Lucienne *require* that the NVME controller + * AMD systems from Renoir onwards *require* that the NVME controller * is put into D3 over a Modern Standby / suspend-to-idle cycle. * * This is "typically" accomplished using the `StorageD3Enable` * property in the _DSD that is checked via the `acpi_storage_d3` function - * but this property was introduced after many of these systems launched - * and most OEM systems don't have it in their BIOS. + * but some OEM systems still don't have it in their BIOS. * * The Microsoft documentation for StorageD3Enable mentioned that Windows has - * a hardcoded allowlist for D3 support, which was used for these platforms. + * a hardcoded allowlist for D3 support as well as a registry key to override + * the BIOS, which has been used for these cases. * * This allows quirking on Linux in a similar fashion. * @@ -219,19 +219,15 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s * https://bugzilla.kernel.org/show_bug.cgi?id=216773 * https://bugzilla.kernel.org/show_bug.cgi?id=217003 * 2) On at least one HP system StorageD3Enable is missing on the second NVME - disk in the system. + * disk in the system. + * 3) On at least one HP Rembrandt system StorageD3Enable is missing on the only + * NVME device. */ -static const struct x86_cpu_id storage_d3_cpu_ids[] = { - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 24, NULL), /* Picasso */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL), /* Cezanne */ - {} -}; - bool force_storage_d3(void) { - return x86_match_cpu(storage_d3_cpu_ids); + if (!cpu_feature_enabled(X86_FEATURE_ZEN)) + return false; + return acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0; } /* -- 2.43.0

7 months, 1 week

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2024