April 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] i40e: Enforce software interrupt during busy-poll exit" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ea558de7238bb12c3435c47f0631e9d17bf4a09f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040507-email-pried-bb87@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea558de7238bb12c3435c47f0631e9d17bf4a09f Mon Sep 17 00:00:00 2001 From: Ivan Vecera <ivecera(a)redhat.com> Date: Sat, 16 Mar 2024 12:38:29 +0100 Subject: [PATCH] i40e: Enforce software interrupt during busy-poll exit As for ice bug fixed by commit b7306b42beaf ("ice: manage interrupts during poll exit") followed by commit 23be7075b318 ("ice: fix software generating extra interrupts") I'm seeing the similar issue also with i40e driver. In certain situation when busy-loop is enabled together with adaptive coalescing, the driver occasionally misses that there are outstanding descriptors to clean when exiting busy poll. Try to catch the remaining work by triggering a software interrupt when exiting busy poll. No extra interrupts will be generated when busy polling is not used. The issue was found when running sockperf ping-pong tcp test with adaptive coalescing and busy poll enabled (50 as value busy_pool and busy_read sysctl knobs) and results in huge latency spikes with more than 100000us. The fix is inspired from the ice driver and do the following: 1) During napi poll exit in case of busy-poll (napo_complete_done() returns false) this is recorded to q_vector that we were in busy loop. 2) Extends i40e_buildreg_itr() to be able to add an enforced software interrupt into built value 2) In i40e_update_enable_itr() enforces a software interrupt trigger if we are exiting busy poll to catch any pending clean-ups 3) Reuses unused 3rd ITR (interrupt throttle) index and set it to 20K interrupts per second to limit the number of these sw interrupts. Test results ============ Prior: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2438563; ReceivedMessages=2438562 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2429473; ReceivedMessages=2429473 sockperf: ====> avg-latency=24.571 (std-dev=93.297, mean-ad=4.904, median-ad=1.510, siqr=1.063, cv=3.797, std-error=0.060, 99.0% ci=[24.417, 24.725]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.571 usec sockperf: Total 2429473 observations; each percentile contains 24294.73 observations sockperf: ---> <MAX> observation = 103294.331 sockperf: ---> percentile 99.999 = 45.633 sockperf: ---> percentile 99.990 = 37.013 sockperf: ---> percentile 99.900 = 35.910 sockperf: ---> percentile 99.000 = 33.390 sockperf: ---> percentile 90.000 = 28.626 sockperf: ---> percentile 75.000 = 27.741 sockperf: ---> percentile 50.000 = 26.743 sockperf: ---> percentile 25.000 = 25.614 sockperf: ---> <MIN> observation = 12.220 After: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2400055; ReceivedMessages=2400054 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2391186; ReceivedMessages=2391186 sockperf: ====> avg-latency=24.965 (std-dev=5.934, mean-ad=4.642, median-ad=1.485, siqr=1.067, cv=0.238, std-error=0.004, 99.0% ci=[24.955, 24.975]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.965 usec sockperf: Total 2391186 observations; each percentile contains 23911.86 observations sockperf: ---> <MAX> observation = 195.841 sockperf: ---> percentile 99.999 = 45.026 sockperf: ---> percentile 99.990 = 39.009 sockperf: ---> percentile 99.900 = 35.922 sockperf: ---> percentile 99.000 = 33.482 sockperf: ---> percentile 90.000 = 28.902 sockperf: ---> percentile 75.000 = 27.821 sockperf: ---> percentile 50.000 = 26.860 sockperf: ---> percentile 25.000 = 25.685 sockperf: ---> <MIN> observation = 12.277 Fixes: 0bcd952feec7 ("ethernet/intel: consolidate NAPI and NAPI exit") Reported-by: Hugo Ferreira <hferreir(a)redhat.com> Reviewed-by: Michal Schmidt <mschmidt(a)redhat.com> Signed-off-by: Ivan Vecera <ivecera(a)redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg(a)intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha(a)intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index ba24f3fa92c3..2fbabcdb5bb5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -955,6 +955,7 @@ struct i40e_q_vector { struct rcu_head rcu; /* to avoid race with update stats on free */ char name[I40E_INT_NAME_STR_LEN]; bool arm_wb_state; + bool in_busy_poll; int irq_num; /* IRQ assigned to this q_vector */ } ____cacheline_internodealigned_in_smp; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f86578857e8a..6576a0081093 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3911,6 +3911,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr; + /* Set ITR for software interrupts triggered after exiting + * busy-loop polling. + */ + wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1), + I40E_ITR_20K); + wr32(hw, I40E_PFINT_RATEN(vector - 1), i40e_intrl_usec_to_reg(vsi->int_rate_limit)); diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 14ab642cafdb..432afbb64201 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -333,8 +333,11 @@ #define I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT 3 #define I40E_PFINT_DYN_CTLN_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) #define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5 +#define I40E_PFINT_DYN_CTLN_INTERVAL_MASK I40E_MASK(0xFFF, I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT) #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT) +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25 +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT) #define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */ #define I40E_PFINT_ICR0_INTEVENT_SHIFT 0 #define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 0d7177083708..1a12b732818e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2630,7 +2630,22 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget, return failure ? budget : (int)total_rx_packets; } -static inline u32 i40e_buildreg_itr(const int type, u16 itr) +/** + * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register + * @itr_idx: interrupt throttling index + * @interval: interrupt throttling interval value in usecs + * @force_swint: force software interrupt + * + * The function builds a value for I40E_PFINT_DYN_CTLN register that + * is used to update interrupt throttling interval for specified ITR index + * and optionally enforces a software interrupt. If the @itr_idx is equal + * to I40E_ITR_NONE then no interval change is applied and only @force_swint + * parameter is taken into account. If the interval change and enforced + * software interrupt are not requested then the built value just enables + * appropriate vector interrupt. + **/ +static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval, + bool force_swint) { u32 val; @@ -2644,23 +2659,33 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled * - * The itr value is reported in microseconds, and the register - * value is recorded in 2 microsecond units. For this reason we - * only need to shift by the interval shift - 1 instead of the - * full value. + * We have to shift the given value as it is reported in microseconds + * and the register value is recorded in 2 microsecond units. */ - itr &= I40E_ITR_MASK; + interval >>= 1; + /* 1. Enable vector interrupt + * 2. Update the interval for the specified ITR index + * (I40E_ITR_NONE in the register is used to indicate that + * no interval update is requested) + */ val = I40E_PFINT_DYN_CTLN_INTENA_MASK | - (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | - (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); + FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) | + FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval); + + /* 3. Enforce software interrupt trigger if requested + * (These software interrupts rate is limited by ITR2 that is + * set to 20K interrupts per second) + */ + if (force_swint) + val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK | + FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK, + I40E_SW_ITR); return val; } -/* a small macro to shorten up some long lines */ -#define INTREG I40E_PFINT_DYN_CTLN - /* The act of updating the ITR will cause it to immediately trigger. In order * to prevent this from throwing off adaptive update statistics we defer the * update so that it can only happen so often. So after either Tx or Rx are @@ -2679,8 +2704,10 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) { + enum i40e_dyn_idx itr_idx = I40E_ITR_NONE; struct i40e_hw *hw = &vsi->back->hw; - u32 intval; + u16 interval = 0; + u32 itr_val; /* If we don't have MSIX, then we only need to re-enable icr0 */ if (!test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) { @@ -2702,8 +2729,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ if (q_vector->rx.target_itr < q_vector->rx.current_itr) { /* Rx ITR needs to be reduced, this is highest priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || @@ -2712,25 +2739,36 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, /* Tx ITR needs to be reduced, this is second priority * Tx ITR needs to be increased more than Rx, fourth priority */ - intval = i40e_buildreg_itr(I40E_TX_ITR, - q_vector->tx.target_itr); + itr_idx = I40E_TX_ITR; + interval = q_vector->tx.target_itr; q_vector->tx.current_itr = q_vector->tx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { /* Rx ITR needs to be increased, third priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else { /* No ITR update, lowest priority */ - intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); if (q_vector->itr_countdown) q_vector->itr_countdown--; } - if (!test_bit(__I40E_VSI_DOWN, vsi->state)) - wr32(hw, INTREG(q_vector->reg_idx), intval); + /* Do not update interrupt control register if VSI is down */ + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return; + + /* Update ITR interval if necessary and enforce software interrupt + * if we are exiting busy poll. + */ + if (q_vector->in_busy_poll) { + itr_val = i40e_buildreg_itr(itr_idx, interval, true); + q_vector->in_busy_poll = false; + } else { + itr_val = i40e_buildreg_itr(itr_idx, interval, false); + } + wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val); } /** @@ -2845,6 +2883,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget) */ if (likely(napi_complete_done(napi, work_done))) i40e_update_enable_itr(vsi, q_vector); + else + q_vector->in_busy_poll = true; return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index abf15067eb5d..2cdc7de6301c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -68,6 +68,7 @@ enum i40e_dyn_idx { /* these are indexes into ITRN registers */ #define I40E_RX_ITR I40E_IDX_ITR0 #define I40E_TX_ITR I40E_IDX_ITR1 +#define I40E_SW_ITR I40E_IDX_ITR2 /* Supported RSS offloads */ #define I40E_DEFAULT_RSS_HENA ( \

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] i40e: Enforce software interrupt during busy-poll exit" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ea558de7238bb12c3435c47f0631e9d17bf4a09f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040504-iron-respect-9ff0@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea558de7238bb12c3435c47f0631e9d17bf4a09f Mon Sep 17 00:00:00 2001 From: Ivan Vecera <ivecera(a)redhat.com> Date: Sat, 16 Mar 2024 12:38:29 +0100 Subject: [PATCH] i40e: Enforce software interrupt during busy-poll exit As for ice bug fixed by commit b7306b42beaf ("ice: manage interrupts during poll exit") followed by commit 23be7075b318 ("ice: fix software generating extra interrupts") I'm seeing the similar issue also with i40e driver. In certain situation when busy-loop is enabled together with adaptive coalescing, the driver occasionally misses that there are outstanding descriptors to clean when exiting busy poll. Try to catch the remaining work by triggering a software interrupt when exiting busy poll. No extra interrupts will be generated when busy polling is not used. The issue was found when running sockperf ping-pong tcp test with adaptive coalescing and busy poll enabled (50 as value busy_pool and busy_read sysctl knobs) and results in huge latency spikes with more than 100000us. The fix is inspired from the ice driver and do the following: 1) During napi poll exit in case of busy-poll (napo_complete_done() returns false) this is recorded to q_vector that we were in busy loop. 2) Extends i40e_buildreg_itr() to be able to add an enforced software interrupt into built value 2) In i40e_update_enable_itr() enforces a software interrupt trigger if we are exiting busy poll to catch any pending clean-ups 3) Reuses unused 3rd ITR (interrupt throttle) index and set it to 20K interrupts per second to limit the number of these sw interrupts. Test results ============ Prior: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2438563; ReceivedMessages=2438562 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2429473; ReceivedMessages=2429473 sockperf: ====> avg-latency=24.571 (std-dev=93.297, mean-ad=4.904, median-ad=1.510, siqr=1.063, cv=3.797, std-error=0.060, 99.0% ci=[24.417, 24.725]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.571 usec sockperf: Total 2429473 observations; each percentile contains 24294.73 observations sockperf: ---> <MAX> observation = 103294.331 sockperf: ---> percentile 99.999 = 45.633 sockperf: ---> percentile 99.990 = 37.013 sockperf: ---> percentile 99.900 = 35.910 sockperf: ---> percentile 99.000 = 33.390 sockperf: ---> percentile 90.000 = 28.626 sockperf: ---> percentile 75.000 = 27.741 sockperf: ---> percentile 50.000 = 26.743 sockperf: ---> percentile 25.000 = 25.614 sockperf: ---> <MIN> observation = 12.220 After: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2400055; ReceivedMessages=2400054 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2391186; ReceivedMessages=2391186 sockperf: ====> avg-latency=24.965 (std-dev=5.934, mean-ad=4.642, median-ad=1.485, siqr=1.067, cv=0.238, std-error=0.004, 99.0% ci=[24.955, 24.975]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.965 usec sockperf: Total 2391186 observations; each percentile contains 23911.86 observations sockperf: ---> <MAX> observation = 195.841 sockperf: ---> percentile 99.999 = 45.026 sockperf: ---> percentile 99.990 = 39.009 sockperf: ---> percentile 99.900 = 35.922 sockperf: ---> percentile 99.000 = 33.482 sockperf: ---> percentile 90.000 = 28.902 sockperf: ---> percentile 75.000 = 27.821 sockperf: ---> percentile 50.000 = 26.860 sockperf: ---> percentile 25.000 = 25.685 sockperf: ---> <MIN> observation = 12.277 Fixes: 0bcd952feec7 ("ethernet/intel: consolidate NAPI and NAPI exit") Reported-by: Hugo Ferreira <hferreir(a)redhat.com> Reviewed-by: Michal Schmidt <mschmidt(a)redhat.com> Signed-off-by: Ivan Vecera <ivecera(a)redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg(a)intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha(a)intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index ba24f3fa92c3..2fbabcdb5bb5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -955,6 +955,7 @@ struct i40e_q_vector { struct rcu_head rcu; /* to avoid race with update stats on free */ char name[I40E_INT_NAME_STR_LEN]; bool arm_wb_state; + bool in_busy_poll; int irq_num; /* IRQ assigned to this q_vector */ } ____cacheline_internodealigned_in_smp; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f86578857e8a..6576a0081093 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3911,6 +3911,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr; + /* Set ITR for software interrupts triggered after exiting + * busy-loop polling. + */ + wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1), + I40E_ITR_20K); + wr32(hw, I40E_PFINT_RATEN(vector - 1), i40e_intrl_usec_to_reg(vsi->int_rate_limit)); diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 14ab642cafdb..432afbb64201 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -333,8 +333,11 @@ #define I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT 3 #define I40E_PFINT_DYN_CTLN_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) #define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5 +#define I40E_PFINT_DYN_CTLN_INTERVAL_MASK I40E_MASK(0xFFF, I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT) #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT) +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25 +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT) #define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */ #define I40E_PFINT_ICR0_INTEVENT_SHIFT 0 #define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 0d7177083708..1a12b732818e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2630,7 +2630,22 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget, return failure ? budget : (int)total_rx_packets; } -static inline u32 i40e_buildreg_itr(const int type, u16 itr) +/** + * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register + * @itr_idx: interrupt throttling index + * @interval: interrupt throttling interval value in usecs + * @force_swint: force software interrupt + * + * The function builds a value for I40E_PFINT_DYN_CTLN register that + * is used to update interrupt throttling interval for specified ITR index + * and optionally enforces a software interrupt. If the @itr_idx is equal + * to I40E_ITR_NONE then no interval change is applied and only @force_swint + * parameter is taken into account. If the interval change and enforced + * software interrupt are not requested then the built value just enables + * appropriate vector interrupt. + **/ +static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval, + bool force_swint) { u32 val; @@ -2644,23 +2659,33 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled * - * The itr value is reported in microseconds, and the register - * value is recorded in 2 microsecond units. For this reason we - * only need to shift by the interval shift - 1 instead of the - * full value. + * We have to shift the given value as it is reported in microseconds + * and the register value is recorded in 2 microsecond units. */ - itr &= I40E_ITR_MASK; + interval >>= 1; + /* 1. Enable vector interrupt + * 2. Update the interval for the specified ITR index + * (I40E_ITR_NONE in the register is used to indicate that + * no interval update is requested) + */ val = I40E_PFINT_DYN_CTLN_INTENA_MASK | - (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | - (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); + FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) | + FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval); + + /* 3. Enforce software interrupt trigger if requested + * (These software interrupts rate is limited by ITR2 that is + * set to 20K interrupts per second) + */ + if (force_swint) + val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK | + FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK, + I40E_SW_ITR); return val; } -/* a small macro to shorten up some long lines */ -#define INTREG I40E_PFINT_DYN_CTLN - /* The act of updating the ITR will cause it to immediately trigger. In order * to prevent this from throwing off adaptive update statistics we defer the * update so that it can only happen so often. So after either Tx or Rx are @@ -2679,8 +2704,10 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) { + enum i40e_dyn_idx itr_idx = I40E_ITR_NONE; struct i40e_hw *hw = &vsi->back->hw; - u32 intval; + u16 interval = 0; + u32 itr_val; /* If we don't have MSIX, then we only need to re-enable icr0 */ if (!test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) { @@ -2702,8 +2729,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ if (q_vector->rx.target_itr < q_vector->rx.current_itr) { /* Rx ITR needs to be reduced, this is highest priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || @@ -2712,25 +2739,36 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, /* Tx ITR needs to be reduced, this is second priority * Tx ITR needs to be increased more than Rx, fourth priority */ - intval = i40e_buildreg_itr(I40E_TX_ITR, - q_vector->tx.target_itr); + itr_idx = I40E_TX_ITR; + interval = q_vector->tx.target_itr; q_vector->tx.current_itr = q_vector->tx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { /* Rx ITR needs to be increased, third priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else { /* No ITR update, lowest priority */ - intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); if (q_vector->itr_countdown) q_vector->itr_countdown--; } - if (!test_bit(__I40E_VSI_DOWN, vsi->state)) - wr32(hw, INTREG(q_vector->reg_idx), intval); + /* Do not update interrupt control register if VSI is down */ + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return; + + /* Update ITR interval if necessary and enforce software interrupt + * if we are exiting busy poll. + */ + if (q_vector->in_busy_poll) { + itr_val = i40e_buildreg_itr(itr_idx, interval, true); + q_vector->in_busy_poll = false; + } else { + itr_val = i40e_buildreg_itr(itr_idx, interval, false); + } + wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val); } /** @@ -2845,6 +2883,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget) */ if (likely(napi_complete_done(napi, work_done))) i40e_update_enable_itr(vsi, q_vector); + else + q_vector->in_busy_poll = true; return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index abf15067eb5d..2cdc7de6301c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -68,6 +68,7 @@ enum i40e_dyn_idx { /* these are indexes into ITRN registers */ #define I40E_RX_ITR I40E_IDX_ITR0 #define I40E_TX_ITR I40E_IDX_ITR1 +#define I40E_SW_ITR I40E_IDX_ITR2 /* Supported RSS offloads */ #define I40E_DEFAULT_RSS_HENA ( \

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] i40e: Enforce software interrupt during busy-poll exit" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x ea558de7238bb12c3435c47f0631e9d17bf4a09f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040500-scalping-relatable-1383@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ea558de7238bb12c3435c47f0631e9d17bf4a09f Mon Sep 17 00:00:00 2001 From: Ivan Vecera <ivecera(a)redhat.com> Date: Sat, 16 Mar 2024 12:38:29 +0100 Subject: [PATCH] i40e: Enforce software interrupt during busy-poll exit As for ice bug fixed by commit b7306b42beaf ("ice: manage interrupts during poll exit") followed by commit 23be7075b318 ("ice: fix software generating extra interrupts") I'm seeing the similar issue also with i40e driver. In certain situation when busy-loop is enabled together with adaptive coalescing, the driver occasionally misses that there are outstanding descriptors to clean when exiting busy poll. Try to catch the remaining work by triggering a software interrupt when exiting busy poll. No extra interrupts will be generated when busy polling is not used. The issue was found when running sockperf ping-pong tcp test with adaptive coalescing and busy poll enabled (50 as value busy_pool and busy_read sysctl knobs) and results in huge latency spikes with more than 100000us. The fix is inspired from the ice driver and do the following: 1) During napi poll exit in case of busy-poll (napo_complete_done() returns false) this is recorded to q_vector that we were in busy loop. 2) Extends i40e_buildreg_itr() to be able to add an enforced software interrupt into built value 2) In i40e_update_enable_itr() enforces a software interrupt trigger if we are exiting busy poll to catch any pending clean-ups 3) Reuses unused 3rd ITR (interrupt throttle) index and set it to 20K interrupts per second to limit the number of these sw interrupts. Test results ============ Prior: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2438563; ReceivedMessages=2438562 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2429473; ReceivedMessages=2429473 sockperf: ====> avg-latency=24.571 (std-dev=93.297, mean-ad=4.904, median-ad=1.510, siqr=1.063, cv=3.797, std-error=0.060, 99.0% ci=[24.417, 24.725]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.571 usec sockperf: Total 2429473 observations; each percentile contains 24294.73 observations sockperf: ---> <MAX> observation = 103294.331 sockperf: ---> percentile 99.999 = 45.633 sockperf: ---> percentile 99.990 = 37.013 sockperf: ---> percentile 99.900 = 35.910 sockperf: ---> percentile 99.000 = 33.390 sockperf: ---> percentile 90.000 = 28.626 sockperf: ---> percentile 75.000 = 27.741 sockperf: ---> percentile 50.000 = 26.743 sockperf: ---> percentile 25.000 = 25.614 sockperf: ---> <MIN> observation = 12.220 After: [root@dell-per640-07 net]# sockperf ping-pong -i 10.9.9.1 --tcp -m 1000 --mps=max -t 120 sockperf: == version #3.10-no.git == sockperf[CLIENT] send on:sockperf: using recvfrom() to block on socket(s) [ 0] IP = 10.9.9.1 PORT = 11111 # TCP sockperf: Warmup stage (sending a few dummy messages)... sockperf: Starting test... sockperf: Test end (interrupted by timer) sockperf: Test ended sockperf: [Total Run] RunTime=119.999 sec; Warm up time=400 msec; SentMessages=2400055; ReceivedMessages=2400054 sockperf: ========= Printing statistics for Server No: 0 sockperf: [Valid Duration] RunTime=119.549 sec; SentMessages=2391186; ReceivedMessages=2391186 sockperf: ====> avg-latency=24.965 (std-dev=5.934, mean-ad=4.642, median-ad=1.485, siqr=1.067, cv=0.238, std-error=0.004, 99.0% ci=[24.955, 24.975]) sockperf: # dropped messages = 0; # duplicated messages = 0; # out-of-order messages = 0 sockperf: Summary: Latency is 24.965 usec sockperf: Total 2391186 observations; each percentile contains 23911.86 observations sockperf: ---> <MAX> observation = 195.841 sockperf: ---> percentile 99.999 = 45.026 sockperf: ---> percentile 99.990 = 39.009 sockperf: ---> percentile 99.900 = 35.922 sockperf: ---> percentile 99.000 = 33.482 sockperf: ---> percentile 90.000 = 28.902 sockperf: ---> percentile 75.000 = 27.821 sockperf: ---> percentile 50.000 = 26.860 sockperf: ---> percentile 25.000 = 25.685 sockperf: ---> <MIN> observation = 12.277 Fixes: 0bcd952feec7 ("ethernet/intel: consolidate NAPI and NAPI exit") Reported-by: Hugo Ferreira <hferreir(a)redhat.com> Reviewed-by: Michal Schmidt <mschmidt(a)redhat.com> Signed-off-by: Ivan Vecera <ivecera(a)redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg(a)intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha(a)intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index ba24f3fa92c3..2fbabcdb5bb5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -955,6 +955,7 @@ struct i40e_q_vector { struct rcu_head rcu; /* to avoid race with update stats on free */ char name[I40E_INT_NAME_STR_LEN]; bool arm_wb_state; + bool in_busy_poll; int irq_num; /* IRQ assigned to this q_vector */ } ____cacheline_internodealigned_in_smp; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f86578857e8a..6576a0081093 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3911,6 +3911,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr; + /* Set ITR for software interrupts triggered after exiting + * busy-loop polling. + */ + wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1), + I40E_ITR_20K); + wr32(hw, I40E_PFINT_RATEN(vector - 1), i40e_intrl_usec_to_reg(vsi->int_rate_limit)); diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 14ab642cafdb..432afbb64201 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -333,8 +333,11 @@ #define I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT 3 #define I40E_PFINT_DYN_CTLN_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) #define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5 +#define I40E_PFINT_DYN_CTLN_INTERVAL_MASK I40E_MASK(0xFFF, I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT) #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT) +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25 +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT) #define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */ #define I40E_PFINT_ICR0_INTEVENT_SHIFT 0 #define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 0d7177083708..1a12b732818e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2630,7 +2630,22 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget, return failure ? budget : (int)total_rx_packets; } -static inline u32 i40e_buildreg_itr(const int type, u16 itr) +/** + * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register + * @itr_idx: interrupt throttling index + * @interval: interrupt throttling interval value in usecs + * @force_swint: force software interrupt + * + * The function builds a value for I40E_PFINT_DYN_CTLN register that + * is used to update interrupt throttling interval for specified ITR index + * and optionally enforces a software interrupt. If the @itr_idx is equal + * to I40E_ITR_NONE then no interval change is applied and only @force_swint + * parameter is taken into account. If the interval change and enforced + * software interrupt are not requested then the built value just enables + * appropriate vector interrupt. + **/ +static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval, + bool force_swint) { u32 val; @@ -2644,23 +2659,33 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled * - * The itr value is reported in microseconds, and the register - * value is recorded in 2 microsecond units. For this reason we - * only need to shift by the interval shift - 1 instead of the - * full value. + * We have to shift the given value as it is reported in microseconds + * and the register value is recorded in 2 microsecond units. */ - itr &= I40E_ITR_MASK; + interval >>= 1; + /* 1. Enable vector interrupt + * 2. Update the interval for the specified ITR index + * (I40E_ITR_NONE in the register is used to indicate that + * no interval update is requested) + */ val = I40E_PFINT_DYN_CTLN_INTENA_MASK | - (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | - (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); + FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) | + FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval); + + /* 3. Enforce software interrupt trigger if requested + * (These software interrupts rate is limited by ITR2 that is + * set to 20K interrupts per second) + */ + if (force_swint) + val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK | + FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK, + I40E_SW_ITR); return val; } -/* a small macro to shorten up some long lines */ -#define INTREG I40E_PFINT_DYN_CTLN - /* The act of updating the ITR will cause it to immediately trigger. In order * to prevent this from throwing off adaptive update statistics we defer the * update so that it can only happen so often. So after either Tx or Rx are @@ -2679,8 +2704,10 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) { + enum i40e_dyn_idx itr_idx = I40E_ITR_NONE; struct i40e_hw *hw = &vsi->back->hw; - u32 intval; + u16 interval = 0; + u32 itr_val; /* If we don't have MSIX, then we only need to re-enable icr0 */ if (!test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) { @@ -2702,8 +2729,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ if (q_vector->rx.target_itr < q_vector->rx.current_itr) { /* Rx ITR needs to be reduced, this is highest priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || @@ -2712,25 +2739,36 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, /* Tx ITR needs to be reduced, this is second priority * Tx ITR needs to be increased more than Rx, fourth priority */ - intval = i40e_buildreg_itr(I40E_TX_ITR, - q_vector->tx.target_itr); + itr_idx = I40E_TX_ITR; + interval = q_vector->tx.target_itr; q_vector->tx.current_itr = q_vector->tx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { /* Rx ITR needs to be increased, third priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else { /* No ITR update, lowest priority */ - intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); if (q_vector->itr_countdown) q_vector->itr_countdown--; } - if (!test_bit(__I40E_VSI_DOWN, vsi->state)) - wr32(hw, INTREG(q_vector->reg_idx), intval); + /* Do not update interrupt control register if VSI is down */ + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return; + + /* Update ITR interval if necessary and enforce software interrupt + * if we are exiting busy poll. + */ + if (q_vector->in_busy_poll) { + itr_val = i40e_buildreg_itr(itr_idx, interval, true); + q_vector->in_busy_poll = false; + } else { + itr_val = i40e_buildreg_itr(itr_idx, interval, false); + } + wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val); } /** @@ -2845,6 +2883,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget) */ if (likely(napi_complete_done(napi, work_done))) i40e_update_enable_itr(vsi, q_vector); + else + q_vector->in_busy_poll = true; return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index abf15067eb5d..2cdc7de6301c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -68,6 +68,7 @@ enum i40e_dyn_idx { /* these are indexes into ITRN registers */ #define I40E_RX_ITR I40E_IDX_ITR0 #define I40E_TX_ITR I40E_IDX_ITR1 +#define I40E_SW_ITR I40E_IDX_ITR2 /* Supported RSS offloads */ #define I40E_DEFAULT_RSS_HENA ( \

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] octeontx2-af: Add array index check" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ef15ddeeb6bee87c044bf7754fac524545bf71e8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040558-trustee-garage-e392@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ef15ddeeb6bee87c044bf7754fac524545bf71e8 Mon Sep 17 00:00:00 2001 From: Aleksandr Mishin <amishin(a)t-argos.ru> Date: Thu, 28 Mar 2024 19:55:05 +0300 Subject: [PATCH] octeontx2-af: Add array index check In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array. Fix this bug by adding 'iter' value check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Aleksandr Mishin <amishin(a)t-argos.ru> Signed-off-by: David S. Miller <davem(a)davemloft.net> diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c index 72e060cf6b61..e9bf9231b018 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c @@ -160,6 +160,8 @@ static int rvu_map_cgx_lmac_pf(struct rvu *rvu) continue; lmac_bmap = cgx_get_lmac_bmap(rvu_cgx_pdata(cgx, rvu)); for_each_set_bit(iter, &lmac_bmap, rvu->hw->lmac_per_cgx) { + if (iter >= MAX_LMAC_COUNT) + continue; lmac = cgx_get_lmacid(rvu_cgx_pdata(cgx, rvu), iter); rvu->pf2cgxlmac_map[pf] = cgxlmac_id_to_bmap(cgx, lmac);

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040539-fiber-dormitory-6321@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040536-paying-life-0a32@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040531-scuba-germinate-e982@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040528-comply-variety-c87f@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040524-olive-outbreak-88c8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] e1000e: move force SMBUS from enable ulp function to avoid" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 861e8086029e003305750b4126ecd6617465f5c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024040521-deduce-blast-00e2@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 861e8086029e003305750b4126ecd6617465f5c7 Mon Sep 17 00:00:00 2001 From: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Sun, 3 Mar 2024 12:51:32 +0200 Subject: [PATCH] e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue Forcing SMBUS inside the ULP enabling flow leads to sporadic PHY loss on some systems. It is suspected to be caused by initiating PHY transactions before the interface settles. Separating this configuration from the ULP enabling flow and moving it to the shutdown function allows enough time for the interface to settle and avoids adding a delay. Fixes: 6607c99e7034 ("e1000e: i219 - fix to enable both ULP and EEE in Sx state") Co-developed-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Dima Ruinskiy <dima.ruinskiy(a)intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Naama Meir <naamax.meir(a)linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d8e97669f31b..f9e94be36e97 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1165,25 +1165,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index cc8c531ec3df..3692fce20195 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (retval) return retval; } + + /* Force SMBUS to allow WOL */ + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL

8 months, 4 weeks

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2024