April 2024 - Linux-stable-mirror

[PATCH 43/46] drm/amd/display: Change ASSR disable sequence

by Wayne Lin

From: Swapnil Patel <swapnil.patel(a)amd.com> [Why] Currently disabling ASSR before stream is disabled causes visible display corruption. [How] Move disable ASSR command to after stream has been disabled. Cc: Mario Limonciello <mario.limonciello(a)amd.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu(a)amd.com> Acked-by: Wayne Lin <wayne.lin(a)amd.com> Signed-off-by: Swapnil Patel <swapnil.patel(a)amd.com> --- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c index 16549068d836..8402ca0695cc 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c @@ -2317,8 +2317,6 @@ void link_set_dpms_off(struct pipe_ctx *pipe_ctx) dc->hwss.disable_audio_stream(pipe_ctx); - edp_set_panel_assr(link, pipe_ctx, &panel_mode_dp, false); - update_psp_stream_config(pipe_ctx, true); dc->hwss.blank_stream(pipe_ctx); @@ -2372,6 +2370,7 @@ void link_set_dpms_off(struct pipe_ctx *pipe_ctx) dc->hwss.disable_stream(pipe_ctx); disable_link(pipe_ctx->stream->link, &pipe_ctx->link_res, pipe_ctx->stream->signal); } + edp_set_panel_assr(link, pipe_ctx, &panel_mode_dp, false); if (pipe_ctx->stream->timing.flags.DSC) { if (dc_is_dp_signal(pipe_ctx->stream->signal)) -- 2.37.3

1 year, 1 month

1
0
0 0

[PATCH 38/46] drm/amd/display: Fix FEC_READY write on DP LT

by Wayne Lin

From: Ilya Bakoulin <ilya.bakoulin(a)amd.com> [Why/How] We can miss writing FEC_READY in some cases before LT start, which violates DP spec. Remove the condition guarding the DPCD write so that the write happens unconditionally. Cc: Mario Limonciello <mario.limonciello(a)amd.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu(a)amd.com> Acked-by: Wayne Lin <wayne.lin(a)amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin(a)amd.com> --- .../amd/display/dc/link/protocols/link_dp_phy.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c index 5cbf5f93e584..bafa52a0165a 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c @@ -151,16 +151,14 @@ enum dc_status dp_set_fec_ready(struct dc_link *link, const struct link_resource return DC_NOT_SUPPORTED; if (ready && dp_should_enable_fec(link)) { - if (link->fec_state == dc_link_fec_not_ready) { - fec_config = 1; + fec_config = 1; - status = core_link_write_dpcd(link, DP_FEC_CONFIGURATION, - &fec_config, sizeof(fec_config)); + status = core_link_write_dpcd(link, DP_FEC_CONFIGURATION, + &fec_config, sizeof(fec_config)); - if (status == DC_OK) { - link_enc->funcs->fec_set_ready(link_enc, true); - link->fec_state = dc_link_fec_ready; - } + if (status == DC_OK) { + link_enc->funcs->fec_set_ready(link_enc, true); + link->fec_state = dc_link_fec_ready; } } else { if (link->fec_state == dc_link_fec_ready) { -- 2.37.3

1 year, 1 month

1
0
0 0

[PATCH 23/46] drm/amd/display: Defer handling mst up request in resume

by Wayne Lin

From: Wayne Lin <wayne.lin(a)amd.com> [Why] Like commit ec5fa9fcdeca ("drm/amd/display: Adjust the MST resume flow"), we want to avoid handling mst topology changes before restoring the old state. If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have changce to handle CSN event first and fire hotplug event before restoring the cached state. [How] Disable mst branch sending up request event before we restoring the cached state. DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume(). Cc: Mario Limonciello <mario.limonciello(a)amd.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Reviewed-by: Hersen Wu <hersenxs.wu(a)amd.com> Signed-off-by: Wayne Lin <wayne.lin(a)amd.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 9d36dba914e9..961b5984afa0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2429,7 +2429,6 @@ static void resume_mst_branch_status(struct drm_dp_mst_topology_mgr *mgr) ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, DP_MST_EN | - DP_UP_REQ_EN | DP_UPSTREAM_IS_SRC); if (ret < 0) { drm_dbg_kms(mgr->dev, "mst write failed - undocked during suspend?\n"); -- 2.37.3

1 year, 1 month

1
0
0 0

patch "iio:imu: adis16475: Fix sync mode setting" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:imu: adis16475: Fix sync mode setting to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 74a72baf204fd509bbe8b53eec35e39869d94341 Mon Sep 17 00:00:00 2001 From: Ramona Gradinariu <ramona.bolboaca13(a)gmail.com> Date: Fri, 5 Apr 2024 07:53:09 +0300 Subject: iio:imu: adis16475: Fix sync mode setting Fix sync mode setting by applying the necessary shift bits. Fixes: fff7352bf7a3 ("iio: imu: Add support for adis16475") Signed-off-by: Ramona Gradinariu <ramona.bolboaca13(a)gmail.com> Reviewed-by: Nuno Sa <nuno.sa(a)analog.com> Link: https://lore.kernel.org/r/20240405045309.816328-2-ramona.bolboaca13@gmail.c… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/imu/adis16475.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index 01f55cc902fa..060a21c70460 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1289,6 +1289,7 @@ static int adis16475_config_sync_mode(struct adis16475 *st) struct device *dev = &st->adis.spi->dev; const struct adis16475_sync *sync; u32 sync_mode; + u16 val; /* default to internal clk */ st->clk_freq = st->info->int_clk * 1000; @@ -1350,8 +1351,9 @@ static int adis16475_config_sync_mode(struct adis16475 *st) * I'm keeping this for simplicity and avoiding extra variables * in chip_info. */ + val = ADIS16475_SYNC_MODE(sync->sync_mode); ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, - ADIS16475_SYNC_MODE_MASK, sync->sync_mode); + ADIS16475_SYNC_MODE_MASK, val); if (ret) return ret; -- 2.44.0

1 year, 1 month

1
0
0 0

patch "iio: accel: mxc4005: Reset chip on probe() and resume()" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: accel: mxc4005: Reset chip on probe() and resume() to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 6b8cffdc4a31e4a72f75ecd1bc13fbf0dafee390 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 26 Mar 2024 12:37:00 +0100 Subject: iio: accel: mxc4005: Reset chip on probe() and resume() On some designs the chip is not properly reset when powered up at boot or after a suspend/resume cycle. Use the sw-reset feature to ensure that the chip is in a clean state after probe() / resume() and in the case of resume() restore the settings (scale, trigger-enabled). Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578 Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/accel/mxc4005.c | 68 +++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 111f4bcf24ad..63c3566a533b 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -5,6 +5,7 @@ * Copyright (c) 2014, Intel Corporation. */ +#include <linux/delay.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/iio/iio.h> @@ -36,6 +37,7 @@ #define MXC4005_REG_INT_CLR1 0x01 #define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01 +#define MXC4005_REG_INT_CLR1_SW_RST 0x10 #define MXC4005_REG_CONTROL 0x0D #define MXC4005_REG_CONTROL_MASK_FSR GENMASK(6, 5) @@ -43,6 +45,9 @@ #define MXC4005_REG_DEVICE_ID 0x0E +/* Datasheet does not specify a reset time, this is a conservative guess */ +#define MXC4005_RESET_TIME_US 2000 + enum mxc4005_axis { AXIS_X, AXIS_Y, @@ -66,6 +71,8 @@ struct mxc4005_data { s64 timestamp __aligned(8); } scan; bool trigger_enabled; + unsigned int control; + unsigned int int_mask1; }; /* @@ -349,6 +356,7 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig, return ret; } + data->int_mask1 = val; data->trigger_enabled = state; mutex_unlock(&data->mutex); @@ -384,6 +392,13 @@ static int mxc4005_chip_init(struct mxc4005_data *data) dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg); + ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1, + MXC4005_REG_INT_CLR1_SW_RST); + if (ret < 0) + return dev_err_probe(data->dev, ret, "resetting chip\n"); + + fsleep(MXC4005_RESET_TIME_US); + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); if (ret < 0) return dev_err_probe(data->dev, ret, "writing INT_MASK0\n"); @@ -479,6 +494,58 @@ static int mxc4005_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +static int mxc4005_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mxc4005_data *data = iio_priv(indio_dev); + int ret; + + /* Save control to restore it on resume */ + ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, &data->control); + if (ret < 0) + dev_err(data->dev, "failed to read reg_control\n"); + + return ret; +} + +static int mxc4005_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mxc4005_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1, + MXC4005_REG_INT_CLR1_SW_RST); + if (ret) { + dev_err(data->dev, "failed to reset chip: %d\n", ret); + return ret; + } + + fsleep(MXC4005_RESET_TIME_US); + + ret = regmap_write(data->regmap, MXC4005_REG_CONTROL, data->control); + if (ret) { + dev_err(data->dev, "failed to restore control register\n"); + return ret; + } + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); + if (ret) { + dev_err(data->dev, "failed to restore interrupt 0 mask\n"); + return ret; + } + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, data->int_mask1); + if (ret) { + dev_err(data->dev, "failed to restore interrupt 1 mask\n"); + return ret; + } + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(mxc4005_pm_ops, mxc4005_suspend, mxc4005_resume); + static const struct acpi_device_id mxc4005_acpi_match[] = { {"MXC4005", 0}, {"MXC6655", 0}, @@ -506,6 +573,7 @@ static struct i2c_driver mxc4005_driver = { .name = MXC4005_DRV_NAME, .acpi_match_table = mxc4005_acpi_match, .of_match_table = mxc4005_of_match, + .pm = pm_sleep_ptr(&mxc4005_pm_ops), }, .probe = mxc4005_probe, .id_table = mxc4005_id, -- 2.44.0

1 year, 1 month

1
0
0 0

patch "iio: accel: mxc4005: Interrupt handling fixes" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: accel: mxc4005: Interrupt handling fixes to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 57a1592784d622ecee0b71940c65429173996b33 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 26 Mar 2024 12:36:59 +0100 Subject: iio: accel: mxc4005: Interrupt handling fixes There are 2 issues with interrupt handling in the mxc4005 driver: 1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE (0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables all other interrupt sources in the INT_SRC1 register. On the MXC4005 this is not an issue because only bit 0 of the register is used. On the MXC6655 OTOH this is a problem since bit7 is used as TC (Temperature Compensation) disable bit and writing 1 to this disables Temperature Compensation which should only be done when running self-tests on the chip. Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable the interrupts to fix this. 2. The datasheets for the MXC4005 / MXC6655 do not state what the reset value for the INT_MASK0 and INT_MASK1 registers is and since these are write only we also cannot learn this from the hw. Presumably the reset value for both is all 0, which means all interrupts disabled. Explicitly set both registers to 0 from mxc4005_chip_init() to ensure both masks are actually set to 0. Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/accel/mxc4005.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 61839be501c2..111f4bcf24ad 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -27,9 +27,13 @@ #define MXC4005_REG_ZOUT_UPPER 0x07 #define MXC4005_REG_ZOUT_LOWER 0x08 +#define MXC4005_REG_INT_MASK0 0x0A + #define MXC4005_REG_INT_MASK1 0x0B #define MXC4005_REG_INT_MASK1_BIT_DRDYE 0x01 +#define MXC4005_REG_INT_CLR0 0x00 + #define MXC4005_REG_INT_CLR1 0x01 #define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01 @@ -113,7 +117,9 @@ static bool mxc4005_is_readable_reg(struct device *dev, unsigned int reg) static bool mxc4005_is_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { + case MXC4005_REG_INT_CLR0: case MXC4005_REG_INT_CLR1: + case MXC4005_REG_INT_MASK0: case MXC4005_REG_INT_MASK1: case MXC4005_REG_CONTROL: return true; @@ -330,17 +336,13 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig, { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct mxc4005_data *data = iio_priv(indio_dev); + unsigned int val; int ret; mutex_lock(&data->mutex); - if (state) { - ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, - MXC4005_REG_INT_MASK1_BIT_DRDYE); - } else { - ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, - ~MXC4005_REG_INT_MASK1_BIT_DRDYE); - } + val = state ? MXC4005_REG_INT_MASK1_BIT_DRDYE : 0; + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, val); if (ret < 0) { mutex_unlock(&data->mutex); dev_err(data->dev, "failed to update reg_int_mask1"); @@ -382,6 +384,14 @@ static int mxc4005_chip_init(struct mxc4005_data *data) dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg); + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); + if (ret < 0) + return dev_err_probe(data->dev, ret, "writing INT_MASK0\n"); + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, 0); + if (ret < 0) + return dev_err_probe(data->dev, ret, "writing INT_MASK1\n"); + return 0; } -- 2.44.0

1 year, 1 month

1
0
0 0

patch "dt-bindings: iio: health: maxim,max30102: fix compatible check" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dt-bindings: iio: health: maxim,max30102: fix compatible check to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 89384a2b656b9dace4c965432a209d5c9c3a2a6f Mon Sep 17 00:00:00 2001 From: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> Date: Sat, 16 Mar 2024 23:56:57 +0100 Subject: dt-bindings: iio: health: maxim,max30102: fix compatible check The "maxim,green-led-current-microamp" property is only available for the max30105 part (it provides an extra green LED), and must be set to false for the max30102 part. Instead, the max30100 part has been used for that, which is not supported by this binding (it has its own binding). This error was introduced during the txt to yaml conversion. Fixes: 5a6a65b11e3a ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion") Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> Acked-by: Conor Dooley <conor.dooley(a)microchip.com> Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@g… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- .../devicetree/bindings/iio/health/maxim,max30102.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index c13c10c8d65d..eed0df9d3a23 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -42,7 +42,7 @@ allOf: properties: compatible: contains: - const: maxim,max30100 + const: maxim,max30102 then: properties: maxim,green-led-current-microamp: false -- 2.44.0

1 year, 1 month

1
0
0 0

patch "iio: pressure: Fixes SPI support for BMP3xx devices" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: pressure: Fixes SPI support for BMP3xx devices to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 5ca29ea4e4073b3caba750efe155b1bd4c597ca9 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis <vassilisamir(a)gmail.com> Date: Sat, 16 Mar 2024 12:07:43 +0100 Subject: iio: pressure: Fixes SPI support for BMP3xx devices Bosch does not use unique BMPxxx_CHIP_ID for the different versions of the device which leads to misidentification of devices if their ID is used. Use a new value in the chip_info structure instead of the BMPxxx_CHIP_ID, in order to choose the correct regmap_bus to be used. Fixes: a9dd9ba32311 ("iio: pressure: Fixes BMP38x and BMP390 SPI support") Signed-off-by: Vasileios Amoiridis <vassilisamir(a)gmail.com> Link: https://lore.kernel.org/r/20240316110743.1998400-3-vassilisamir@gmail.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/pressure/bmp280-core.c | 1 + drivers/iio/pressure/bmp280-spi.c | 9 ++------- drivers/iio/pressure/bmp280.h | 1 + 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index fe8734468ed3..62e9e93d915d 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1233,6 +1233,7 @@ const struct bmp280_chip_info bmp380_chip_info = { .chip_id = bmp380_chip_ids, .num_chip_id = ARRAY_SIZE(bmp380_chip_ids), .regmap_config = &bmp380_regmap_config, + .spi_read_extra_byte = true, .start_up_time = 2000, .channels = bmp380_channels, .num_channels = 2, diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 038d36aad3eb..4e19ea0b4d39 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -96,15 +96,10 @@ static int bmp280_spi_probe(struct spi_device *spi) chip_info = spi_get_device_match_data(spi); - switch (chip_info->chip_id[0]) { - case BMP380_CHIP_ID: - case BMP390_CHIP_ID: + if (chip_info->spi_read_extra_byte) bmp_regmap_bus = &bmp380_regmap_bus; - break; - default: + else bmp_regmap_bus = &bmp280_regmap_bus; - break; - } regmap = devm_regmap_init(&spi->dev, bmp_regmap_bus, diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 4012387d7956..5812a344ed8e 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -423,6 +423,7 @@ struct bmp280_chip_info { int num_chip_id; const struct regmap_config *regmap_config; + bool spi_read_extra_byte; const struct iio_chan_spec *channels; int num_channels; -- 2.44.0

1 year, 1 month

1
0
0 0

patch "iio: pressure: Fixes BME280 SPI driver data" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: pressure: Fixes BME280 SPI driver data to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 546a4f4b5f4d930ea57f5510e109acf08eca5e87 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis <vassilisamir(a)gmail.com> Date: Sat, 16 Mar 2024 12:07:42 +0100 Subject: iio: pressure: Fixes BME280 SPI driver data Use bme280_chip_info structure instead of bmp280_chip_info in SPI support for the BME280 sensor. Fixes: 0b0b772637cd ("iio: pressure: bmp280: Use chip_info pointers for each chip as driver data") Signed-off-by: Vasileios Amoiridis <vassilisamir(a)gmail.com> Link: https://lore.kernel.org/r/20240316110743.1998400-2-vassilisamir@gmail.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/pressure/bmp280-spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index a444d4b2978b..038d36aad3eb 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -127,7 +127,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, { .compatible = "bosch,bmp181", .data = &bmp180_chip_info }, { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, - { .compatible = "bosch,bme280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bme280_chip_info }, { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, @@ -139,7 +139,7 @@ static const struct spi_device_id bmp280_spi_id[] = { { "bmp180", (kernel_ulong_t)&bmp180_chip_info }, { "bmp181", (kernel_ulong_t)&bmp180_chip_info }, { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, - { "bme280", (kernel_ulong_t)&bmp280_chip_info }, + { "bme280", (kernel_ulong_t)&bme280_chip_info }, { "bmp380", (kernel_ulong_t)&bmp380_chip_info }, { "bmp580", (kernel_ulong_t)&bmp580_chip_info }, { } -- 2.44.0

1 year, 1 month

1
0
0 0

[PATCH 2/2] drm/xe/vm: prevent UAF in rebind_work_func()

by Matthew Auld

We flush the rebind worker during the vm close phase, however in places like preempt_fence_work_func() we seem to queue the rebind worker without first checking if the vm has already been closed. The concern here is the vm being closed with the worker flushed, but then being rearmed later, which looks like potential uaf, since there is no actual refcounting to track the queued worker. We can't take the vm->lock here in preempt_rebind_work_func() to first check if the vm is closed since that will deadlock, so instead flush the worker again when the vm refcount reaches zero. v2: - Grabbing vm->lock in the preempt worker creates a deadlock, so checking the closed state is tricky. Instead flush the worker when the refcount reaches zero. It should be impossible to queue the preempt worker without already holding vm ref. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249 Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.8+ --- drivers/gpu/drm/xe/xe_vm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 2ba7c920a8af..71de9848bdc2 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -1509,6 +1509,9 @@ static void vm_destroy_work_func(struct work_struct *w) /* xe_vm_close_and_put was not called? */ xe_assert(xe, !vm->size); + if (xe_vm_in_preempt_fence_mode(vm)) + flush_work(&vm->preempt.rebind_work); + mutex_destroy(&vm->snap_mutex); if (!(vm->flags & XE_VM_FLAG_MIGRATION)) -- 2.44.0

1 year, 1 month

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2024