April 2024 - Linux-stable-mirror

Re: [PATCH] arm64: dts: mediatek: mt8395-genio-1200-evk: add u3port1 for xhci1

by Macpaul Lin

On 2/16/24 17:57, Macpaul Lin wrote: > This patch fixes an issue where xhci1 was not functioning properly because > the state and PHY settings were incorrect. > > The introduction of the 'force-mode' property in the phy-mtk-tphy driver > allows for the correct initialization of xhci1 by updating the Device Tree > settings accordingly. > > The necessary fixup which added support for the 'force-mode' switch in the > phy-mtk-tphy driver. > commit 9b27303003f5 ("phy: mediatek: tphy: add support force phy mode switch") > Link: https://lore.kernel.org/r/20231211025624.28991-2-chunfeng.yun@mediatek.com Dear AngeloGioacchino, Just a soft reminding about the patch has been sent a while back for the shared U3PHY and PCIe PHY setup for genio-1200 boards. I'm not sure if you've missed this patch in mail box. :) The patch is pretty important as it lets the device tree (dts) decide whether to enable U3PHY or PCIe PHY. Because this is a shared hardware phy and could only be configured in dts to decide which function to be initialized, so it's something that should be included in the board-specific dts files. Do you think it needs to be resubmitted, or is it still in the queue for review? It's meant to be ready for action from kernel version 6.8 onwards. Looking forward to your thoughts on this. Let me know if there's anything else you need from my side. > Prior to this fix, the system would exhibit the following probe failure messages > for xhci1: > xhci-mtk 11290000.usb: supply vbus not found, using dummy regulator > xhci-mtk 11290000.usb: uwk - reg:0x400, version:104 > xhci-mtk 11290000.usb: xHCI Host Controller > xhci-mtk 11290000.usb: new USB bus registered, assigned bus number 5 > xhci-mtk 11290000.usb: clocks are not stable (0x1003d0f) > xhci-mtk 11290000.usb: can't setup: -110 > xhci-mtk 11290000.usb: USB bus 5 deregistered > xhci-mtk: probe of 11290000.usb failed with error -110 > > With the application of this dts fixup, the aforementioned initialization errors > are resolved and xhci1 is working. > > Signed-off-by: Macpaul Lin <macpaul.lin(a)mediatek.com> > --- > arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts > index 7fc515a07c65..e0b9f2615c11 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts > @@ -854,6 +854,10 @@ > > &u3phy1 { > status = "okay"; > + > + u3port1: usb-phy@700 { > + mediatek,force-mode; > + }; > }; > > &u3phy2 { > @@ -885,6 +889,8 @@ > }; > > &xhci1 { > + phys = <&u2port1 PHY_TYPE_USB2>, > + <&u3port1 PHY_TYPE_USB3>; > vusb33-supply = <&mt6359_vusb_ldo_reg>; > status = "okay"; > }; Thanks Macpaul Lin

1 year, 1 month

2
1
0 0

[PATCH 1/2 v3] USB: serial: option: add Lonsung U8300/U9300 product

by Coia Prant

Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up, to rebind it to qmi_wwan driver. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up. The proper configuration is: Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <coiaprant(a)gmail.com> Reviewed-by: Lars Melin <larsm17(a)gmail.com> Cc: stable(a)vger.kernel.org Cc: netdev(a)vger.kernel.org --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 55a65d941ccb..27a116901459 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -412,6 +412,10 @@ static void option_instat_callback(struct urb *urb); */ #define LONGCHEER_VENDOR_ID 0x1c9e +/* Longsung products */ +#define LONGSUNG_U8300_PRODUCT_ID 0x9b05 +#define LONGSUNG_U9300_PRODUCT_ID 0x9b3c + /* 4G Systems products */ /* This one was sold as the VW and Skoda "Carstick LTE" */ #define FOUR_G_SYSTEMS_PRODUCT_CARSTICK_LTE 0x7605 @@ -2054,6 +2058,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U8300_PRODUCT_ID), + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, LONGSUNG_U9300_PRODUCT_ID), + .driver_info = RSVD(0) | RSVD(4) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) }, /* Pirelli */ -- 2.39.2

1 year, 1 month

3
2
0 0

[PATCH v2 2/2] wifi: rtl8xxxu: enable MFP support with security flag of RX descriptor

by Martin Kaistra

In order to connect to networks which require 802.11w, add the MFP_CAPABLE flag and let mac80211 do the actual crypto in software. When a robust management frame is received, rx_dec->swdec is not set, even though the HW did not decrypt it. Extend the check and don't set RX_FLAG_DECRYPTED for these frames in order to use SW decryption. Use the security flag in the RX descriptor for this purpose, like it is done in the rtw88 driver. Cc: stable(a)vger.kernel.org Signed-off-by: Martin Kaistra <martin.kaistra(a)linutronix.de> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 9 +++++++++ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index fd92d23c43d91..16d884a3d87df 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -122,6 +122,15 @@ enum rtl8xxxu_rx_type { RX_TYPE_ERROR = -1 }; +enum rtl8xxxu_rx_desc_enc { + RX_DESC_ENC_NONE = 0, + RX_DESC_ENC_WEP40 = 1, + RX_DESC_ENC_TKIP_WO_MIC = 2, + RX_DESC_ENC_TKIP_MIC = 3, + RX_DESC_ENC_AES = 4, + RX_DESC_ENC_WEP104 = 5, +}; + struct rtl8xxxu_rxdesc16 { #ifdef __LITTLE_ENDIAN u32 pktlen:14; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 4a49f8f9d80f2..b15a30a54259e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -6473,7 +6473,8 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb) rx_status->mactime = rx_desc->tsfl; rx_status->flag |= RX_FLAG_MACTIME_START; - if (!rx_desc->swdec) + if (!rx_desc->swdec && + rx_desc->security != RX_DESC_ENC_NONE) rx_status->flag |= RX_FLAG_DECRYPTED; if (rx_desc->crc32) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; @@ -6578,7 +6579,8 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb) rx_status->mactime = rx_desc->tsfl; rx_status->flag |= RX_FLAG_MACTIME_START; - if (!rx_desc->swdec) + if (!rx_desc->swdec && + rx_desc->security != RX_DESC_ENC_NONE) rx_status->flag |= RX_FLAG_DECRYPTED; if (rx_desc->crc32) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; @@ -7998,6 +8000,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface, ieee80211_hw_set(hw, HAS_RATE_CONTROL); ieee80211_hw_set(hw, SUPPORT_FAST_XMIT); ieee80211_hw_set(hw, AMPDU_AGGREGATION); + ieee80211_hw_set(hw, MFP_CAPABLE); wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); -- 2.39.2

1 year, 1 month

1
0
0 0

[PATCH 2/2] wifi: rtl8xxxu: enable MFP support

by Martin Kaistra

In order to connect to networks which require 802.11w, add the MFP_CAPABLE flag and let mac80211 do the actual crypto in software. When a robust management frame is received, rx_dec->swdec is not set, even though the HW did not decrypt it. Extend the check and don't set RX_FLAG_DECRYPTED for these frames in order to use SW decryption. Use the security flag in the RX descriptor for this purpose, like it is done in the rtw88 driver. Cc: stable(a)vger.kernel.org Signed-off-by: Martin Kaistra <martin.kaistra(a)linutronix.de> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 9 +++++++++ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index fd92d23c43d91..4f2615dbfd0f0 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -122,6 +122,15 @@ enum rtl8xxxu_rx_type { RX_TYPE_ERROR = -1 }; +enum rtw_rx_desc_enc { + RX_DESC_ENC_NONE = 0, + RX_DESC_ENC_WEP40 = 1, + RX_DESC_ENC_TKIP_WO_MIC = 2, + RX_DESC_ENC_TKIP_MIC = 3, + RX_DESC_ENC_AES = 4, + RX_DESC_ENC_WEP104 = 5, +}; + struct rtl8xxxu_rxdesc16 { #ifdef __LITTLE_ENDIAN u32 pktlen:14; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 4a49f8f9d80f2..b15a30a54259e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -6473,7 +6473,8 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb) rx_status->mactime = rx_desc->tsfl; rx_status->flag |= RX_FLAG_MACTIME_START; - if (!rx_desc->swdec) + if (!rx_desc->swdec && + rx_desc->security != RX_DESC_ENC_NONE) rx_status->flag |= RX_FLAG_DECRYPTED; if (rx_desc->crc32) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; @@ -6578,7 +6579,8 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb) rx_status->mactime = rx_desc->tsfl; rx_status->flag |= RX_FLAG_MACTIME_START; - if (!rx_desc->swdec) + if (!rx_desc->swdec && + rx_desc->security != RX_DESC_ENC_NONE) rx_status->flag |= RX_FLAG_DECRYPTED; if (rx_desc->crc32) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; @@ -7998,6 +8000,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface, ieee80211_hw_set(hw, HAS_RATE_CONTROL); ieee80211_hw_set(hw, SUPPORT_FAST_XMIT); ieee80211_hw_set(hw, AMPDU_AGGREGATION); + ieee80211_hw_set(hw, MFP_CAPABLE); wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); -- 2.39.2

1 year, 1 month

2
3
0 0

[PATCH] ALSA: hda/realtek: Fix internal speakers for Legion Y9000X 2022 IAH7

by ArcticLampyrid

This fixes the sound not working from internal speakers on Lenovo Legion Y9000X 2022 IAH7 models. Signed-off-by: ArcticLampyrid <ArcticLampyrid(a)outlook.com> Cc: <stable(a)vger.kernel.org> --- sound/pci/hda/cs35l41_hda_property.c | 17 +++++++++++++++++ sound/pci/hda/patch_realtek.c | 1 + 2 files changed, 18 insertions(+) diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 8fb688e41..244e41d51 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -109,6 +109,7 @@ static const struct cs35l41_config cs35l41_config_table[] = { { "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 }, { "10431F62", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "10433A60", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, + { "17AA386E", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 }, { "17AA386F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 }, { "17AA3877", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 }, { "17AA3878", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 }, @@ -414,6 +415,21 @@ static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct device *phy return 0; } +/* + * Some devices just have a single interrupt line for multiple amps, for which we + * should just register the interrupt for the first amp. Otherwise, we would meet EBUSY + * when registering the interrupt for the second amp. + */ +static int single_interrupt_dsd_config(struct cs35l41_hda *cs35l41, struct device *physdev, int id, + const char *hid) +{ + generic_dsd_config(cs35l41, physdev, id, hid); + if (id != 0x40) { + cs35l41->hw_cfg.gpio2.func = CS35L41_NOT_USED; + } + return 0; +} + struct cs35l41_prop_model { const char *hid; const char *ssid; @@ -500,6 +516,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10431F1F", generic_dsd_config }, { "CSC3551", "10431F62", generic_dsd_config }, { "CSC3551", "10433A60", generic_dsd_config }, + { "CSC3551", "17AA386E", single_interrupt_dsd_config }, { "CSC3551", "17AA386F", generic_dsd_config }, { "CSC3551", "17AA3877", generic_dsd_config }, { "CSC3551", "17AA3878", generic_dsd_config }, diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cdcb28aa9..ac729187f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10382,6 +10382,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6), SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), + SND_PCI_QUIRK(0x17aa, 0x386e, "Legion Y9000X 2022 IAH7", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x17aa, 0x386f, "Legion 7i 16IAX7", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x17aa, 0x3870, "Lenovo Yoga 7 14ARB7", ALC287_FIXUP_YOGA7_14ARB7_I2C), SND_PCI_QUIRK(0x17aa, 0x3877, "Lenovo Legion 7 Slim 16ARHA7", ALC287_FIXUP_CS35L41_I2C_2), -- 2.44.0

1 year, 1 month

2
5
0 0

[PATCH v2 0/2] usb: dwc3: Disable susphy during initialization

by Thinh Nguyen

We notice some platforms set "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when they should not need to. Just make sure that the GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are clear during initialization. The host initialization involved xhci. So the dwc3 needs to implement the xhci_plat_priv->plat_start() for xhci to re-enable the suspend bits. Since there's a prerequisite patch to drivers/usb/host/xhci-plat.h that's not a fix patch, this series should go on Greg's usb-testing branch instead of usb-linus. Changes in v2: - Fix xhci-rzv2m build issue Thinh Nguyen (2): usb: xhci-plat: Don't include xhci.h usb: dwc3: core: Prevent phy suspend during init drivers/usb/dwc3/core.c | 90 +++++++++++++++-------------------- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 2 + drivers/usb/dwc3/host.c | 27 +++++++++++ drivers/usb/host/xhci-plat.h | 4 +- drivers/usb/host/xhci-rzv2m.c | 1 + 6 files changed, 72 insertions(+), 53 deletions(-) base-commit: 3d122e6d27e417a9fa91181922743df26b2cd679 -- 2.28.0

1 year, 1 month

1
2
0 0

+ mm-hugetlb-fix-missing-hugetlb_lock-for-resv-uncharge.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/hugetlb: fix missing hugetlb_lock for resv uncharge has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-hugetlb-fix-missing-hugetlb_lock-for-resv-uncharge.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Peter Xu <peterx(a)redhat.com> Subject: mm/hugetlb: fix missing hugetlb_lock for resv uncharge Date: Wed, 17 Apr 2024 17:18:35 -0400 There is a recent report on UFFDIO_COPY over hugetlb: https://lore.kernel.org/all/000000000000ee06de0616177560@google.com/ 350: lockdep_assert_held(&hugetlb_lock); Should be an issue in hugetlb but triggered in an userfault context, where it goes into the unlikely path where two threads modifying the resv map together. Mike has a fix in that path for resv uncharge but it looks like the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd() will update the cgroup pointer, so it requires to be called with the lock held. Link: https://lkml.kernel.org/r/20240417211836.2742593-3-peterx@redhat.com Fixes: 79aa925bf239 ("hugetlb_cgroup: fix reservation accounting") Signed-off-by: Peter Xu <peterx(a)redhat.com> Reported-by: syzbot+4b8077a5fccc61c385a1(a)syzkaller.appspotmail.com Cc: Mina Almasry <almasrymina(a)google.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/hugetlb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/mm/hugetlb.c~mm-hugetlb-fix-missing-hugetlb_lock-for-resv-uncharge +++ a/mm/hugetlb.c @@ -3268,9 +3268,12 @@ struct folio *alloc_hugetlb_folio(struct rsv_adjust = hugepage_subpool_put_pages(spool, 1); hugetlb_acct_memory(h, -rsv_adjust); - if (deferred_reserve) + if (deferred_reserve) { + spin_lock_irq(&hugetlb_lock); hugetlb_cgroup_uncharge_folio_rsvd(hstate_index(h), pages_per_huge_page(h), folio); + spin_unlock_irq(&hugetlb_lock); + } } if (!memcg_charge_ret) _ Patches currently in -mm which might be from peterx(a)redhat.com are mm-hugetlb-fix-missing-hugetlb_lock-for-resv-uncharge.patch mm-hmm-process-pud-swap-entry-without-pud_huge.patch mm-gup-cache-p4d-in-follow_p4d_mask.patch mm-gup-check-p4d-presence-before-going-on.patch mm-x86-change-pxd_huge-behavior-to-exclude-swap-entries.patch mm-sparc-change-pxd_huge-behavior-to-exclude-swap-entries.patch mm-arm-use-macros-to-define-pmd-pud-helpers.patch mm-arm-redefine-pmd_huge-with-pmd_leaf.patch mm-arm64-merge-pxd_huge-and-pxd_leaf-definitions.patch mm-powerpc-redefine-pxd_huge-with-pxd_leaf.patch mm-gup-merge-pxd-huge-mapping-checks.patch mm-treewide-replace-pxd_huge-with-pxd_leaf.patch mm-treewide-remove-pxd_huge.patch mm-arm-remove-pmd_thp_or_huge.patch mm-document-pxd_leaf-api.patch mm-always-initialise-folio-_deferred_list-fix.patch selftests-mm-run_vmtestssh-fix-hugetlb-mem-size-calculation.patch selftests-mm-run_vmtestssh-fix-hugetlb-mem-size-calculation-fix.patch mm-kconfig-config_pgtable_has_huge_leaves.patch mm-hugetlb-declare-hugetlbfs_pagecache_present-non-static.patch mm-make-hpage_pxd_-macros-even-if-thp.patch mm-introduce-vma_pgtable_walk_beginend.patch mm-arch-provide-pud_pfn-fallback.patch mm-arch-provide-pud_pfn-fallback-fix.patch mm-gup-drop-folio_fast_pin_allowed-in-hugepd-processing.patch mm-gup-refactor-record_subpages-to-find-1st-small-page.patch mm-gup-handle-hugetlb-for-no_page_table.patch mm-gup-cache-pudp-in-follow_pud_mask.patch mm-gup-handle-huge-pud-for-follow_pud_mask.patch mm-gup-handle-huge-pmd-for-follow_pmd_mask.patch mm-gup-handle-huge-pmd-for-follow_pmd_mask-fix.patch mm-gup-handle-hugepd-for-follow_page.patch mm-gup-handle-hugetlb-in-the-generic-follow_page_mask-code.patch mm-allow-anon-exclusive-check-over-hugetlb-tail-pages.patch

1 year, 1 month

1
0
0 0

[PATCH] drm/xe/vm: prevent UAF in rebind_work_func()

by Matthew Auld

We flush the rebind worker during the vm close phase, however in places like preempt_fence_work_func() we seem to queue the rebind worker without first checking if the vm has already been closed. The concern here is the vm being closed with the worker flushed, but then being rearmed later, which looks like potential uaf, since there is no actual refcounting to track the queued worker. To ensure this can't happen prevent queueing the rebind worker once the vm has been closed. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249 Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.8+ --- drivers/gpu/drm/xe/xe_pt.c | 2 +- drivers/gpu/drm/xe/xe_vm.h | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_pt.c b/drivers/gpu/drm/xe/xe_pt.c index 5b7930f46cf3..e21461be904f 100644 --- a/drivers/gpu/drm/xe/xe_pt.c +++ b/drivers/gpu/drm/xe/xe_pt.c @@ -1327,7 +1327,7 @@ __xe_pt_bind_vma(struct xe_tile *tile, struct xe_vma *vma, struct xe_exec_queue } if (!rebind && last_munmap_rebind && xe_vm_in_preempt_fence_mode(vm)) - xe_vm_queue_rebind_worker(vm); + xe_vm_queue_rebind_worker_locked(vm); } else { kfree(rfence); kfree(ifence); diff --git a/drivers/gpu/drm/xe/xe_vm.h b/drivers/gpu/drm/xe/xe_vm.h index 306cd0934a19..8420fbf19f6d 100644 --- a/drivers/gpu/drm/xe/xe_vm.h +++ b/drivers/gpu/drm/xe/xe_vm.h @@ -211,10 +211,20 @@ int xe_vm_rebind(struct xe_vm *vm, bool rebind_worker); int xe_vm_invalidate_vma(struct xe_vma *vma); -static inline void xe_vm_queue_rebind_worker(struct xe_vm *vm) +static inline void xe_vm_queue_rebind_worker_locked(struct xe_vm *vm) { xe_assert(vm->xe, xe_vm_in_preempt_fence_mode(vm)); - queue_work(vm->xe->ordered_wq, &vm->preempt.rebind_work); + lockdep_assert_held(&vm->lock); + + if (!xe_vm_is_closed(vm)) + queue_work(vm->xe->ordered_wq, &vm->preempt.rebind_work); +} + +static inline void xe_vm_queue_rebind_worker(struct xe_vm *vm) +{ + down_read(&vm->lock); + xe_vm_queue_rebind_worker_locked(vm); + up_read(&vm->lock); } /** @@ -225,12 +235,13 @@ static inline void xe_vm_queue_rebind_worker(struct xe_vm *vm) * If the rebind functionality on a compute vm was disabled due * to nothing to execute. Reactivate it and run the rebind worker. * This function should be called after submitting a batch to a compute vm. + * */ static inline void xe_vm_reactivate_rebind(struct xe_vm *vm) { if (xe_vm_in_preempt_fence_mode(vm) && vm->preempt.rebind_deactivated) { vm->preempt.rebind_deactivated = false; - xe_vm_queue_rebind_worker(vm); + xe_vm_queue_rebind_worker_locked(vm); } } -- 2.44.0

1 year, 1 month

2
2
0 0

[PATCH v2] PCI: dw-rockchip: Fix GPIO initialization flag

by Niklas Cassel

PERST is active low according to the PCIe specification. However, the existing pcie-dw-rockchip.c driver does: gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1); When asserting + deasserting PERST. This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH: $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588* The actual toggling of PERST is correct. (And we cannot change it anyway, since that would break device tree compatibility.) However, this driver does request the GPIO to be initialized as GPIOD_OUT_HIGH, which does cause a silly sequence where PERST gets toggled back and forth for no good reason. Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which for this driver means PERST asserted). This will avoid an unnecessary signal change where PERST gets deasserted (by devm_gpiod_get_optional()) and then gets asserted (by rockchip_pcie_start_link()) just a few instructions later. Before patch, debug prints on EP side, when booting RC: [ 845.606810] pci: PERST asserted by host! [ 852.483985] pci: PERST de-asserted by host! [ 852.503041] pci: PERST asserted by host! [ 852.610318] pci: PERST de-asserted by host! After patch, debug prints on EP side, when booting RC: [ 125.107921] pci: PERST asserted by host! [ 132.111429] pci: PERST de-asserted by host! This extra, very short, PERST assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE. Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver") Tested-by: Jianfeng Liu <liujianfeng1994(a)gmail.com> Signed-off-by: Niklas Cassel <cassel(a)kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> Cc: stable(a)vger.kernel.org # 5.15+ --- Changes since V1: -Picked up tags. -CC stable. -Clarified commit message. drivers/pci/controller/dwc/pcie-dw-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c index d6842141d384..a909e42b4273 100644 --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c @@ -240,7 +240,7 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev, return PTR_ERR(rockchip->apb_base); rockchip->rst_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_HIGH); + GPIOD_OUT_LOW); if (IS_ERR(rockchip->rst_gpio)) return PTR_ERR(rockchip->rst_gpio); -- 2.44.0

1 year, 1 month

3
2
0 0

[PATCH] Revert 2267b2e84593bd3d61a1188e68fba06307fa9dab

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> ltp test fcntl17 fails on v5.15.154. This was bisected to commit 2267b2e84593 ("lockd: introduce safe async lock op"). Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli(a)oracle.com> Cc: stable(a)vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> --- Documentation/filesystems/nfs/exporting.rst | 7 ------- fs/lockd/svclock.c | 4 +++- fs/nfsd/nfs4state.c | 10 +++------- include/linux/exportfs.h | 14 -------------- 4 files changed, 6 insertions(+), 29 deletions(-) diff --git a/Documentation/filesystems/nfs/exporting.rst b/Documentation/filesystems/nfs/exporting.rst index 6a1cbd7de38d..6f59a364f84c 100644 --- a/Documentation/filesystems/nfs/exporting.rst +++ b/Documentation/filesystems/nfs/exporting.rst @@ -241,10 +241,3 @@ following flags are defined: all of an inode's dirty data on last close. Exports that behave this way should set EXPORT_OP_FLUSH_ON_CLOSE so that NFSD knows to skip waiting for writeback when closing such files. - - EXPORT_OP_ASYNC_LOCK - Indicates a capable filesystem to do async lock - requests from lockd. Only set EXPORT_OP_ASYNC_LOCK if the filesystem has - it's own ->lock() functionality as core posix_lock_file() implementation - has no async lock request handling yet. For more information about how to - indicate an async lock request from a ->lock() file_operations struct, see - fs/locks.c and comment for the function vfs_lock_file(). diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c index 55c0a0331188..4e30f3c50970 100644 --- a/fs/lockd/svclock.c +++ b/fs/lockd/svclock.c @@ -470,7 +470,9 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, struct nlm_host *host, struct nlm_lock *lock, int wait, struct nlm_cookie *cookie, int reclaim) { +#if IS_ENABLED(CONFIG_SUNRPC_DEBUG) struct inode *inode = nlmsvc_file_inode(file); +#endif struct nlm_block *block = NULL; int error; int mode; @@ -484,7 +486,7 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, (long long)lock->fl.fl_end, wait); - if (!exportfs_lock_op_is_async(inode->i_sb->s_export_op)) { + if (nlmsvc_file_file(file)->f_op->lock) { async_block = wait; wait = 0; } diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 40b5b226e504..d07176eee935 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -7420,7 +7420,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_blocked_lock *nbl = NULL; struct file_lock *file_lock = NULL; struct file_lock *conflock = NULL; - struct super_block *sb; __be32 status = 0; int lkflg; int err; @@ -7442,7 +7441,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, dprintk("NFSD: nfsd4_lock: permission denied!\n"); return status; } - sb = cstate->current_fh.fh_dentry->d_sb; if (lock->lk_is_new) { if (nfsd4_has_session(cstate)) @@ -7494,8 +7492,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, fp = lock_stp->st_stid.sc_file; switch (lock->lk_type) { case NFS4_READW_LT: - if (nfsd4_has_session(cstate) || - exportfs_lock_op_is_async(sb->s_export_op)) + if (nfsd4_has_session(cstate)) fl_flags |= FL_SLEEP; fallthrough; case NFS4_READ_LT: @@ -7507,8 +7504,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, fl_type = F_RDLCK; break; case NFS4_WRITEW_LT: - if (nfsd4_has_session(cstate) || - exportfs_lock_op_is_async(sb->s_export_op)) + if (nfsd4_has_session(cstate)) fl_flags |= FL_SLEEP; fallthrough; case NFS4_WRITE_LT: @@ -7536,7 +7532,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, * for file locks), so don't attempt blocking lock notifications * on those filesystems: */ - if (!exportfs_lock_op_is_async(sb->s_export_op)) + if (nf->nf_file->f_op->lock) fl_flags &= ~FL_SLEEP; nbl = find_or_allocate_block(lock_sop, &fp->fi_fhandle, nn); diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index 6525f4b7eb97..218fc5c54e90 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -222,23 +222,9 @@ struct export_operations { atomic attribute updates */ #define EXPORT_OP_FLUSH_ON_CLOSE (0x20) /* fs flushes file data on close */ -#define EXPORT_OP_ASYNC_LOCK (0x40) /* fs can do async lock request */ unsigned long flags; }; -/** - * exportfs_lock_op_is_async() - export op supports async lock operation - * @export_ops: the nfs export operations to check - * - * Returns true if the nfs export_operations structure has - * EXPORT_OP_ASYNC_LOCK in their flags set - */ -static inline bool -exportfs_lock_op_is_async(const struct export_operations *export_ops) -{ - return export_ops->flags & EXPORT_OP_ASYNC_LOCK; -} - extern int exportfs_encode_inode_fh(struct inode *inode, struct fid *fid, int *max_len, struct inode *parent); extern int exportfs_encode_fh(struct dentry *dentry, struct fid *fid, -- 2.44.0

1 year, 1 month

3
3
0 0

Re: btrfs: sanity tests fails on 6.8.3

by Linux regression tracking (Thorsten Leemhuis)

[adding the authors of the two commits mentioned as well as the Btrfs maintainers and the regressions & stable list to the list of recipients] On 15.04.24 05:56, Hiroshi Takekawa wrote: > > Module loading fails with CONFIG_BTRFS_FS_RUN_SANITY_TESTS enabled on > 6.8.3-6.8.6. > > Bisected: > Reverting these commits, then module loading succeeds. > 70f49f7b9aa3dfa70e7a2e3163ab4cae7c9a457a FWIW, that is a linux-stable commit-id for 41044b41ad2c8c ("btrfs: add helper to get fs_info from struct inode pointer") [v6.9-rc1, v6.8.3 (70f49f7b9aa3df)] > 86211eea8ae1676cc819d2b4fdc8d995394be07d FWIW, that was a mainline commit-id for 86211eea8ae167 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter") [v6.9-rc1, v6.8.3 (f19dad4f440af4)] Also: There is a report that to me looks a lot like it's about the same problem: https://bugzilla.kernel.org/show_bug.cgi?id=218720 Ciao, Thorsten > Backtrace: > [ 69.030943] xor: automatically using best checksumming function avx > [ 69.031940] raid6: skipped pq benchmark and selected avx2x4 > [ 69.031942] raid6: using avx2x2 recovery algorithm > [ 69.074954] Btrfs loaded, zoned=no, fsverity=no > [ 69.074973] BTRFS: selftest: sectorsize: 4096 nodesize: 4096 > [ 69.074974] BTRFS: selftest: running btrfs free space cache tests > [ 69.074979] BTRFS: selftest: running extent only tests > [ 69.074981] BTRFS: selftest: running bitmap only tests > [ 69.074986] BTRFS: selftest: running bitmap and extent tests > [ 69.074989] BTRFS: selftest: running space stealing from bitmap to extent tests > [ 69.075128] BTRFS: selftest: running bytes index tests > [ 69.075134] BTRFS: selftest: running extent buffer operation tests > [ 69.075135] BTRFS: selftest: running btrfs_split_item tests > [ 69.075140] BTRFS: selftest: running extent I/O tests > [ 69.075141] BTRFS: selftest: running find delalloc tests > [ 69.098156] BUG: kernel NULL pointer dereference, address: 0000000000000208 > [ 69.098169] #PF: supervisor read access in kernel mode > [ 69.098174] #PF: error_code(0x0000) - not-present page > [ 69.098179] PGD 0 P4D 0 > [ 69.098182] Oops: 0000 [#1] PREEMPT SMP NOPTI > [ 69.098187] CPU: 16 PID: 9701 Comm: modprobe Tainted: P OE 6.8.4 #1 > [ 69.098194] Hardware name: ASUS System Product Name/PRIME Z490-A, BIOS 2801 10/27/2023 > [ 69.098200] RIP: 0010:find_lock_delalloc_range+0x30/0x260 [btrfs] > [ 69.098239] Code: 57 41 56 41 55 41 54 53 48 83 ec 40 49 89 d6 49 89 f7 49 89 fc 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 48 8b 87 40 fe ff ff <48> 8b 80 08 02 00 00 48 85 c0 74 09 48 8b a8 a0 0c 00 00 eb 05 bd > [ 69.098252] RSP: 0018:ffffa2c087cfb8a8 EFLAGS: 00010282 > [ 69.098256] RAX: 0000000000000000 RBX: 0000000000000fff RCX: ffffa2c087cfb938 > [ 69.098262] RDX: ffffa2c087cfb940 RSI: ffffdf1544fbac80 RDI: ffffa085c86b05f0 > [ 69.098266] RBP: 0000000000000000 R08: 0000000000000010 R09: 0000000000000000 > [ 69.098271] R10: ffffa0852f8e8a20 R11: ffffffffbb22eb70 R12: ffffa085c86b05f0 > [ 69.098276] R13: ffffdf1544fbac80 R14: ffffa2c087cfb940 R15: ffffdf1544fbac80 > [ 69.098280] FS: 00007f6447289740(0000) GS:ffffa0a3edc00000(0000) knlGS:0000000000000000 > [ 69.098286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 69.098290] CR2: 0000000000000208 CR3: 0000000176cec006 CR4: 00000000007706f0 > [ 69.098295] PKRU: 55555554 > [ 69.098297] Call Trace: > [ 69.098300] <TASK> > [ 69.098302] ? __die_body+0x5f/0xb0 > [ 69.098307] ? page_fault_oops+0x294/0x3c0 > [ 69.098311] ? exc_page_fault+0x4b/0x70 > [ 69.098316] ? asm_exc_page_fault+0x26/0x30 > [ 69.098319] ? __pfx_workingset_update_node+0x10/0x10 > [ 69.098325] ? find_lock_delalloc_range+0x30/0x260 [btrfs] > [ 69.098355] btrfs_test_extent_io+0x185/0x1210 [btrfs] > [ 69.098378] btrfs_run_sanity_tests+0x7c/0x120 [btrfs] > [ 69.098400] ? __pfx_init_module+0x10/0x10 [btrfs] > [ 69.098421] init_module+0x1b/0x90 [btrfs] > [ 69.098441] ? __pfx_init_module+0x10/0x10 [btrfs] > [ 69.098462] do_one_initcall+0x115/0x340 > [ 69.098598] ? idr_alloc_cyclic+0x139/0x1d0 > [ 69.098728] ? __kernfs_new_node+0xc7/0x230 > [ 69.098855] ? sysvec_apic_timer_interrupt+0x15/0x80 > [ 69.098984] ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 > [ 69.099111] ? __slab_free+0x74/0x270 > [ 69.099239] ? __slab_free+0x74/0x270 > [ 69.099364] ? vfree+0x16c/0x200 > [ 69.099488] ? kfree+0x14e/0x200 > [ 69.099611] ? vfree+0x16c/0x200 > [ 69.099733] ? load_module+0x104e/0x11c0 > [ 69.099856] ? kmalloc_trace+0x11e/0x240 > [ 69.099980] do_init_module+0x7d/0x240 > [ 69.100102] __x64_sys_finit_module+0x293/0x380 > [ 69.100226] do_syscall_64+0x89/0x110 > [ 69.100347] ? syscall_exit_work+0xaf/0xd0 > [ 69.100466] ? syscall_exit_to_user_mode+0x74/0x80 > [ 69.100585] ? do_syscall_64+0x98/0x110 > [ 69.100703] ? syscall_exit_work+0xaf/0xd0 > [ 69.100820] ? syscall_exit_to_user_mode+0x74/0x80 > [ 69.100937] ? do_syscall_64+0x98/0x110 > [ 69.101050] ? do_syscall_64+0x98/0x110 > [ 69.101160] ? do_syscall_64+0x98/0x110 > [ 69.101263] entry_SYSCALL_64_after_hwframe+0x73/0x7b > [ 69.101361] RIP: 0033:0x7f6446b1e3ed > [ 69.101457] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fb 29 0d 00 f7 d8 64 89 01 48 > [ 69.101667] RSP: 002b:00007fff472969b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 > [ 69.101774] RAX: ffffffffffffffda RBX: 000056091ee62c00 RCX: 00007f6446b1e3ed > [ 69.101881] RDX: 0000000000000000 RSI: 000056091da20585 RDI: 0000000000000009 > [ 69.101987] RBP: 000056091da20585 R08: 00007f6446bf1d00 R09: 0000000000000000 > [ 69.102092] R10: 0000000000000050 R11: 0000000000000246 R12: 0000000000040000 > [ 69.102196] R13: 000056091ee6a5d0 R14: 00007f64472970a8 R15: 000056091ee625d0 > [ 69.102299] </TASK> > [ 69.102399] Modules linked in: btrfs(+) raid6_pq xor zstd_compress lzo_decompress lzo_compress efivarfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia(POE) virtiofs virtio fuse virtio_ring ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle vhost_vsock vmw_vsock_virtio_transport_common vsock vhost_net vhost vhost_iotlb tun xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat nf_nat xt_addrtype iptable_filter ip_tables br_netfilter bridge stp llc overlay sr_mod cdrom snd_pcm_oss snd_mixer_oss vmw_vmci nct6775 hwmon_vid nct6775_core nf_log_syslog nft_log nft_ct nf_tables libcrc32c nfnetlink joydev ipv6 mei_me ee1004 mei pl2303 usbserial usb_storage coretemp hwmon intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek snd_hda_codec_generic kvm_intel led_class snd_hda_codec_hdmi kvm irqbypass crc32c_intel sha512_ssse3 sha256_ssse3 snd_hda_intel sha1_ssse3 snd_intel_dspcfg aesni_intel snd_hda_codec crypto_simd snd_hda_core > [ 69.102430] cryptd snd_pcm rapl snd_timer i2c_i801 intel_cstate wmi_bmof intel_wmi_thunderbolt intel_uncore i2c_smbus rtc_cmos snd sd_mod soundcore thermal fan wmi acpi_pad button [last unloaded: nvidia(POE)] > [ 69.103752] CR2: 0000000000000208 > [ 69.103902] ---[ end trace 0000000000000000 ]--- > [ 69.259181] RIP: 0010:find_lock_delalloc_range+0x30/0x260 [btrfs] > [ 69.259364] Code: 57 41 56 41 55 41 54 53 48 83 ec 40 49 89 d6 49 89 f7 49 89 fc 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 48 8b 87 40 fe ff ff <48> 8b 80 08 02 00 00 48 85 c0 74 09 48 8b a8 a0 0c 00 00 eb 05 bd > [ 69.259691] RSP: 0018:ffffa2c087cfb8a8 EFLAGS: 00010282 > [ 69.259856] RAX: 0000000000000000 RBX: 0000000000000fff RCX: ffffa2c087cfb938 > [ 69.260023] RDX: ffffa2c087cfb940 RSI: ffffdf1544fbac80 RDI: ffffa085c86b05f0 > [ 69.260191] RBP: 0000000000000000 R08: 0000000000000010 R09: 0000000000000000 > [ 69.260360] R10: ffffa0852f8e8a20 R11: ffffffffbb22eb70 R12: ffffa085c86b05f0 > [ 69.260531] R13: ffffdf1544fbac80 R14: ffffa2c087cfb940 R15: ffffdf1544fbac80 > [ 69.260704] FS: 00007f6447289740(0000) GS:ffffa0a3edc00000(0000) knlGS:0000000000000000 > [ 69.260882] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 69.261061] CR2: 0000000000000208 CR3: 0000000176cec006 CR4: 00000000007706f0 > [ 69.261242] PKRU: 55555554 > [ 69.261423] note: modprobe[9701] exited with irqs disabled > > -- > Hiroshi Takekawa <sian(a)big.or.jp> P.S.: #regzbot ^introduced 70f49f7b9aa3df #regzbot duplicate: https://bugzilla.kernel.org/show_bug.cgi?id=218720 #regzbot title: btrfs: sanity tests fails and causes Oops #regzbot ignore-activity

1 year, 1 month

7
6
0 0

[PATCH v1] arm64: dts: imx8mm: fix missing pgc_vpu_* power domain parent

by Vitor Soares

From: Vitor Soares <vitor.soares(a)toradex.com> The pgc_vpu_* nodes miss the reference to the power domain parent, leading the system to hang during the resume. As these PU domains are nested inside the vpumix domain, let's reference it accordingly. After this change, the suspend/resume is working. Cc: Lucas Stach <l.stach(a)pengutronix.de> Cc: <stable(a)vger.kernel.org> Closes: https://lore.kernel.org/all/fccbb040330a706a4f7b34875db1d896a0bf81c8.camel@… Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") Signed-off-by: Vitor Soares <vitor.soares(a)toradex.com> --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 8a1b42b94dce..97d0c6d23ad8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -739,16 +739,19 @@ pgc_vpumix: power-domain@6 { pgc_vpu_g1: power-domain@7 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_VPUG1>; + power-domains = <&pgc_vpumix>; }; pgc_vpu_g2: power-domain@8 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_VPUG2>; + power-domains = <&pgc_vpumix>; }; pgc_vpu_h1: power-domain@9 { #power-domain-cells = <0>; reg = <IMX8MM_POWER_DOMAIN_VPUH1>; + power-domains = <&pgc_vpumix>; }; pgc_dispmix: power-domain@10 { -- 2.34.1

1 year, 1 month

2
9
0 0

[PATCH] random: handle creditable entropy from atomic process context

by Jason A. Donenfeld

The entropy accounting changes a static key when the RNG has initialized, since it only ever initializes once. Static key changes, however, cannot be made from atomic context, so depending on where the last creditable entropy comes from, the static key change might need to be deferred to a worker. Previously the code used the execute_in_process_context() helper function, which accounts for whether or not the caller is in_interrupt(). However, that doesn't account for the case where the caller is actually in process context but is holding a spinlock. This turned out to be the case with input_handle_event() in drivers/input/input.c contributing entropy: [<ffffffd613025ba0>] die+0xa8/0x2fc [<ffffffd613027428>] bug_handler+0x44/0xec [<ffffffd613016964>] brk_handler+0x90/0x144 [<ffffffd613041e58>] do_debug_exception+0xa0/0x148 [<ffffffd61400c208>] el1_dbg+0x60/0x7c [<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90 [<ffffffd613011294>] el1h_64_sync+0x64/0x6c [<ffffffd613102d88>] __might_resched+0x1fc/0x2e8 [<ffffffd613102b54>] __might_sleep+0x44/0x7c [<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec [<ffffffd6132c2820>] static_key_enable+0x14/0x38 [<ffffffd61400ac08>] crng_set_ready+0x14/0x28 [<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8 [<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc [<ffffffd6138580c8>] add_timer_randomness+0x264/0x270 [<ffffffd613857e54>] add_input_randomness+0x38/0x48 [<ffffffd613a80f94>] input_handle_event+0x2b8/0x490 [<ffffffd613a81310>] input_event+0x6c/0x98 According to Guoyong, it's not really possible to refactor the various drivers to never hold a spinlock there. And in_atomic() isn't reliable. So, rather than trying to be too fancy, just punt the change in the static key to a workqueue always. There's basically no drawback of doing this, as the code already needed to account for the static key not changing immediately, and given that it's just an optimization, there's not exactly a hurry to change the static key right away, so deferal is fine. Reported-by: Guoyong Wang <guoyong.wang(a)mediatek.com> Cc: stable(a)vger.kernel.org Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> --- Guoyong- can you test this and tell me whether it fixes the problem you were seeing? If so, I'll try to get this sent up for 6.9. -Jason drivers/char/random.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 456be28ba67c..2597cb43f438 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -702,7 +702,7 @@ static void extract_entropy(void *buf, size_t len) static void __cold _credit_init_bits(size_t bits) { - static struct execute_work set_ready; + static DECLARE_WORK(set_ready, crng_set_ready); unsigned int new, orig, add; unsigned long flags; @@ -718,8 +718,8 @@ static void __cold _credit_init_bits(size_t bits) if (orig < POOL_READY_BITS && new >= POOL_READY_BITS) { crng_reseed(NULL); /* Sets crng_init to CRNG_READY under base_crng.lock. */ - if (static_key_initialized) - execute_in_process_context(crng_set_ready, &set_ready); + if (static_key_initialized && system_unbound_wq) + queue_work(system_unbound_wq, &set_ready); atomic_notifier_call_chain(&random_ready_notifier, 0, NULL); wake_up_interruptible(&crng_init_wait); kill_fasync(&fasync, SIGIO, POLL_IN); @@ -890,8 +890,8 @@ void __init random_init(void) /* * If we were initialized by the cpu or bootloader before jump labels - * are initialized, then we should enable the static branch here, where - * it's guaranteed that jump labels have been initialized. + * or workqueues are initialized, then we should enable the static + * branch here, where it's guaranteed that these have been initialized. */ if (!static_branch_likely(&crng_is_ready) && crng_init >= CRNG_READY) crng_set_ready(NULL); -- 2.44.0

1 year, 1 month

1
0
0 0

Linux 6.8.7

by Greg Kroah-Hartman

I'm announcing the release of the 6.8.7 kernel. All users of the 6.8 kernel series must upgrade. The updated 6.8.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.8.y and can be browsed at the normal kernel.org git web browser: https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Documentation/admin-guide/hw-vuln/spectre.rst | 22 Documentation/admin-guide/kernel-parameters.txt | 12 Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml | 9 Makefile | 2 arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 1 arch/arm/mach-omap2/board-n8x0.c | 23 - arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 16 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 40 - arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 16 arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi | 2 arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi | 2 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 8 arch/arm64/include/asm/tlbflush.h | 20 arch/x86/Kconfig | 21 arch/x86/events/core.c | 1 arch/x86/include/asm/apic.h | 3 arch/x86/kernel/apic/apic.c | 6 arch/x86/kernel/cpu/bugs.c | 82 +-- arch/x86/kernel/cpu/common.c | 48 +- block/blk-cgroup.c | 9 block/blk-cgroup.h | 2 block/blk-core.c | 2 drivers/accel/ivpu/ivpu_drv.c | 20 drivers/accel/ivpu/ivpu_hw.h | 6 drivers/accel/ivpu/ivpu_hw_37xx.c | 7 drivers/accel/ivpu/ivpu_hw_40xx.c | 6 drivers/accel/ivpu/ivpu_ipc.c | 8 drivers/accel/ivpu/ivpu_pm.c | 5 drivers/acpi/numa/hmat.c | 43 + drivers/acpi/scan.c | 3 drivers/ata/libata-core.c | 2 drivers/ata/libata-scsi.c | 9 drivers/base/node.c | 6 drivers/cxl/acpi.c | 8 drivers/cxl/core/cdat.c | 58 +- drivers/cxl/core/mbox.c | 5 drivers/cxl/core/port.c | 76 ++- drivers/cxl/core/regs.c | 5 drivers/cxl/cxl.h | 8 drivers/firmware/arm_ffa/driver.c | 2 drivers/firmware/arm_scmi/raw_mode.c | 7 drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 6 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 drivers/gpu/drm/amd/amdgpu/soc21.c | 32 + drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c | 2 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 1 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 15 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c | 6 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 drivers/gpu/drm/amd/display/dc/core/dc_state.c | 9 drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c | 3 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 12 drivers/gpu/drm/ast/ast_dp.c | 3 drivers/gpu/drm/drm_client_modeset.c | 3 drivers/gpu/drm/i915/display/intel_cdclk.c | 7 drivers/gpu/drm/i915/display/intel_cdclk.h | 3 drivers/gpu/drm/i915/display/intel_ddi.c | 5 drivers/gpu/drm/i915/display/intel_dp.c | 6 drivers/gpu/drm/i915/display/intel_psr.c | 11 drivers/gpu/drm/i915/display/intel_vrr.c | 7 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 4 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 10 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 8 drivers/gpu/drm/msm/dp/dp_display.c | 2 drivers/gpu/drm/msm/msm_fb.c | 6 drivers/gpu/drm/msm/msm_kms.c | 4 drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 drivers/gpu/drm/panfrost/panfrost_mmu.c | 13 drivers/gpu/drm/qxl/qxl_release.c | 50 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 11 drivers/gpu/drm/xe/xe_display.c | 5 drivers/gpu/drm/xe/xe_hwmon.c | 4 drivers/iommu/intel/iommu.c | 11 drivers/iommu/intel/perfmon.c | 2 drivers/iommu/intel/svm.c | 2 drivers/md/raid1.c | 2 drivers/media/cec/core/cec-adap.c | 14 drivers/mmc/host/omap.c | 48 +- drivers/net/dsa/mt7530.c | 229 ++++++++-- drivers/net/dsa/mt7530.h | 5 drivers/net/ethernet/amazon/ena/ena_com.c | 2 drivers/net/ethernet/amazon/ena/ena_netdev.c | 35 + drivers/net/ethernet/amazon/ena/ena_xdp.c | 4 drivers/net/ethernet/amd/pds_core/core.c | 14 drivers/net/ethernet/amd/pds_core/core.h | 5 drivers/net/ethernet/amd/pds_core/dev.c | 3 drivers/net/ethernet/amd/pds_core/main.c | 8 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 6 drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 20 drivers/net/ethernet/marvell/octeontx2/nic/qos.c | 1 drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h | 8 drivers/net/ethernet/mellanox/mlx5/core/en/qos.c | 33 - drivers/net/ethernet/mellanox/mlx5/core/en/selq.c | 2 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 7 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 17 drivers/net/ethernet/mellanox/mlx5/core/main.c | 37 - drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 4 drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c | 22 drivers/net/ethernet/micrel/ks8851.h | 3 drivers/net/ethernet/micrel/ks8851_common.c | 16 drivers/net/ethernet/micrel/ks8851_par.c | 11 drivers/net/ethernet/micrel/ks8851_spi.c | 11 drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 drivers/net/geneve.c | 4 drivers/net/virtio_net.c | 26 - drivers/platform/chrome/cros_ec_uart.c | 28 - drivers/scsi/hisi_sas/hisi_sas_main.c | 2 drivers/scsi/qla2xxx/qla_edif.c | 2 drivers/scsi/sg.c | 20 drivers/vhost/vhost.c | 24 - fs/btrfs/delayed-inode.c | 3 fs/btrfs/inode.c | 13 fs/btrfs/ioctl.c | 37 + fs/btrfs/qgroup.c | 2 fs/btrfs/root-tree.c | 10 fs/btrfs/root-tree.h | 2 fs/btrfs/tests/extent-io-tests.c | 28 + fs/btrfs/transaction.c | 17 fs/ceph/addr.c | 4 fs/ceph/caps.c | 4 fs/ceph/mds_client.c | 9 fs/ceph/mds_client.h | 3 fs/kernfs/file.c | 9 fs/proc/bootconfig.c | 12 fs/smb/client/cached_dir.c | 4 include/acpi/acpi_bus.h | 8 include/linux/bootconfig.h | 1 include/linux/dma-fence.h | 7 include/linux/irqflags.h | 2 include/linux/node.h | 18 include/linux/u64_stats_sync.h | 9 include/net/addrconf.h | 4 include/net/af_unix.h | 2 include/net/bluetooth/bluetooth.h | 11 include/net/ip_tunnels.h | 33 + init/main.c | 5 io_uring/io_uring.c | 25 + io_uring/net.c | 22 io_uring/rw.c | 2 kernel/cpu.c | 3 kernel/kprobes.c | 18 kernel/power/suspend.c | 6 kernel/trace/ring_buffer.c | 6 kernel/trace/trace_events.c | 4 lib/checksum_kunit.c | 5 net/batman-adv/translation-table.c | 2 net/bluetooth/hci_request.c | 4 net/bluetooth/hci_sock.c | 21 net/bluetooth/hci_sync.c | 66 ++ net/bluetooth/iso.c | 50 -- net/bluetooth/l2cap_core.c | 3 net/bluetooth/l2cap_sock.c | 52 -- net/bluetooth/rfcomm/sock.c | 14 net/bluetooth/sco.c | 23 - net/ipv4/netfilter/arp_tables.c | 4 net/ipv4/netfilter/ip_tables.c | 4 net/ipv4/route.c | 4 net/ipv6/addrconf.c | 7 net/ipv6/ip6_fib.c | 7 net/ipv6/netfilter/ip6_tables.c | 4 net/openvswitch/conntrack.c | 5 net/unix/af_unix.c | 8 net/unix/garbage.c | 35 + net/unix/scm.c | 8 net/xdp/xsk.c | 2 tools/testing/selftests/kselftest.h | 33 + tools/testing/selftests/timers/posix_timers.c | 105 ++-- 170 files changed, 1553 insertions(+), 876 deletions(-) Aaro Koskinen (6): ARM: OMAP2+: fix bogus MMC GPIO labels on Nokia N8x0 ARM: OMAP2+: fix N810 MMC gpiod table mmc: omap: fix broken slot switch lookup mmc: omap: fix deferred probe mmc: omap: restore original power up/down steps ARM: OMAP2+: fix USB regression on Nokia N8x0 Adam Dunlap (1): x86/apic: Force native_apic_mem_read() to use the MOV instruction Alex Constantino (1): Revert "drm/qxl: simplify qxl_fence_wait" Alex Deucher (1): drm/amdgpu: always force full reset for SOC21 Alex Hung (1): drm/amd/display: Return max resolution supported by DWB Alexander Wetzel (2): scsi: sg: Avoid sg device teardown race scsi: sg: Avoid race in error handling & drop bogus warn Amir Goldstein (1): kernfs: annotate different lockdep class for of->mutex of writable files Anna-Maria Behnsen (1): PM: s2idle: Make sure CPUs will wakeup directly on resume Archie Pusaka (1): Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit Arnd Bergmann (6): nouveau: fix function cast warning lib: checksum: hide unused expected_csum_ipv6_magic[] ipv6: fib: hide unused 'pn' variable ipv4/route: avoid unused-but-set-variable warning tracing: hide unused ftrace_event_id_fops irqflags: Explicitly ignore lockdep_hrtimer_exit() argument Arınç ÜNAL (1): net: dsa: mt7530: trap link-local frames regardless of ST Port State Boris Brezillon (1): drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() Boris Burkov (4): btrfs: qgroup: correctly model root qgroup rsv in convert btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations btrfs: record delayed inode root in transaction btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans Breno Leitao (1): virtio_net: Do not send RSS key if it is not supported Brett Creeley (1): pds_core: Fix pdsc_check_pci_health function to use work thread Carolina Jubran (3): net/mlx5e: RSS, Block changing channels number when RXFH is configured net/mlx5e: Fix mlx5e_priv_init() cleanup flow net/mlx5e: HTB, Fix inconsistencies with QoS SQs number Cosmin Ratiu (2): net/mlx5: Properly link new fs rules into the tree net/mlx5: Correctly compare pkt reformat ids Cristian Marussi (1): firmware: arm_scmi: Make raw debugfs entries non-seekable Damien Le Moal (1): ata: libata-scsi: Fix ata_scsi_dev_rescan() error path Dan Carpenter (1): scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() Daniel Machon (1): net: sparx5: fix wrong config being used when reconfiguring PCS Daniel Sneddon (1): x86/bugs: Fix return type of spectre_bhi_state() Dave Jiang (8): cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned base/node / ACPI: Enumerate node access class for 'struct access_coordinate' ACPI: HMAT: Introduce 2 levels of generic port access class ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes cxl: Split out combine_coordinates() for common shared usage cxl: Split out host bridge access coordinates cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates() cxl: Fix retrieving of access_coordinates in PCIe path David Arinzon (4): net: ena: Fix potential sign extension issue net: ena: Wrong missing IO completions check order net: ena: Fix incorrect descriptor free behavior net: ena: Set tx_info->xdpf value to NULL David Sterba (1): btrfs: tests: allocate dummy fs_info and root in test_find_delalloc() Dillon Varone (1): drm/amd/display: Do not recursively call manual trigger programming Dmitry Antipov (1): Bluetooth: Fix memory leak in hci_req_sync_complete() Dmitry Baryshkov (3): drm/msm/dpu: don't allow overriding data from catalog drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible dt-bindings: display/msm: sm8150-mdss: add DP node Eric Dumazet (3): xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING geneve: fix header validation in geneve[6]_xmit_skb netfilter: complete validation of user input Fabio Estevam (1): ARM: dts: imx7s-warp: Pass OV2680 link-frequencies Frank Li (8): arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order arm64: dts: imx8qm-ss-dma: fix can lpcg indices arm64: dts: imx8-ss-dma: fix can lpcg indices arm64: dts: imx8-ss-dma: fix adc lpcg indices arm64: dts: imx8-ss-conn: fix usb lpcg indices arm64: dts: imx8-ss-dma: fix pwm lpcg indices arm64: dts: imx8-ss-lsio: fix pwm lpcg indices arm64: dts: imx8-ss-dma: fix spi lpcg indices Fudongwang (1): drm/amd/display: fix disable otg wa logic in DCN316 Gavin Shan (3): arm64: tlb: Fix TLBI RANGE operand vhost: Add smp_rmb() in vhost_vq_avail_empty() vhost: Add smp_rmb() in vhost_enable_notify() Geetha sowjanya (1): octeontx2-af: Fix NIX SQ mode and BP config Gerd Bayer (2): s390/ism: fix receive message buffer allocation Revert "s390/ism: fix receive message buffer allocation" Greg Kroah-Hartman (1): Linux 6.8.7 Hans de Goede (1): ACPI: scan: Do not increase dep_unmet for already met dependencies Hariprasad Kelam (1): octeontx2-pf: Fix transmit scheduler resource leak Harish Kasiviswanathan (1): drm/amdkfd: Reset GPU on queue preemption failure Harry Wentland (2): drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4 drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST Igor Pylypiv (1): ata: libata-core: Allow command duration limits detection for ACS-4 drives Ilya Maximets (1): net: openvswitch: fix unwanted error log on timeout policy probing Ingo Molnar (1): x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr' Jacek Lawrynowicz (3): accel/ivpu: Put NPU back to D3hot after failed resume accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATE accel/ivpu: Fix deadlock in context_xa Jacob Pan (1): iommu/vt-d: Allocate local memory for page request queue Jammy Huang (1): drm/ast: Fix soft lockup Jens Axboe (1): io_uring: disable io-wq execution of multishot NOWAIT requests Jens Wiklander (1): firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get() Jiri Benc (1): ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Johan Hovold (2): drm/msm/dp: fix runtime PM leak on disconnect drm/msm/dp: fix runtime PM leak on connect failure John Stultz (2): selftests: timers: Fix posix_timers ksft_print_msg() warning selftests: timers: Fix abs() warning in posix_timers test Josh Poimboeuf (6): x86/bugs: Fix BHI documentation x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES x86/bugs: Fix BHI handling of RRSBA x86/bugs: Clarify that syscall hardening isn't a BHI mitigation x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI Karthik Poosa (1): drm/xe/hwmon: Cast result to output precision on left shift of operand Kuniyuki Iwashima (2): af_unix: Clear stale u->oob_skb. af_unix: Do not use atomic ops for unix_sk(sk)->inflight. Kwangjin Ko (1): cxl/core: Fix initialization of mbox_cmd.size_out in get event Lang Yu (1): drm/amdgpu/umsch: reinitialize write pointer in hw init Lijo Lazar (1): drm/amdgpu: Reset dGPU if suspend got aborted Lu Baolu (1): iommu/vt-d: Fix WARN_ON in iommu probe path Luca Weiss (1): drm/msm/adreno: Set highest_bank_bit for A619 Lucas De Marchi (1): drm/xe/display: Fix double mutex initialization Luiz Augusto von Dentz (9): Bluetooth: ISO: Align broadcast sync_timeout with connection timeout Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset Bluetooth: hci_sync: Use QoS to determine which PHY to scan Bluetooth: hci_sync: Fix using the same interval and window for Coded PHY Bluetooth: SCO: Fix not validating setsockopt user input Bluetooth: RFCOMM: Fix not validating setsockopt user input Bluetooth: L2CAP: Fix not validating setsockopt user input Bluetooth: ISO: Fix not validating setsockopt user input Bluetooth: hci_sock: Fix not validating setsockopt user input Marek Vasut (2): net: ks8851: Inline ks8851_rx_skb() net: ks8851: Handle softirqs at the end of IRQ thread to fix hang Masami Hiramatsu (1): fs/proc: Skip bootloader comment if no embedded kernel parameters Michael Liang (1): net/mlx5: offset comp irq index in name by one Michal Luczaj (1): af_unix: Fix garbage collector racing against connect() Ming Lei (1): block: fix q->blkg_list corruption during disk rebind Moshe Shemesh (1): net/mlx5: SF, Stop waiting for FW as teardown was called Namhyung Kim (1): perf/x86: Fix out of range data Nathan Chancellor (1): selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn NeilBrown (1): ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE Nini Song (1): media: cec: core: remove length check of Timer Status Noah Loomans (1): platform/chrome: cros_ec_uart: properly fix race condition Oleg Nesterov (2): selftests/timers/posix_timers: Reimplement check_timer_distribution() selftests: kselftest: Fix build failure with NOLIBC Pavan Chebbi (1): bnxt_en: Reset PTP tx_avail after possible firmware reset Pavel Begunkov (2): io_uring: refactor DEFER_TASKRUN multishot checks io_uring/net: restore msg_control on sendzc retry Petr Tesarik (1): u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file Peyton Lee (1): drm/amdgpu/vpe: power on vpe when hw_init Raag Jadav (1): ACPI: bus: allow _UID matching for integer zero Rahul Rameshbabu (1): net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit Sean Christopherson (1): x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n Shannon Nelson (1): pds_core: use pci_reset_function for health reset Shay Drory (1): net/mlx5: Register devlink first under devlink lock Stephen Boyd (1): drm/msm: Add newlines to some debug prints Steve French (1): smb3: fix Open files on server counter going negative Steven Rostedt (Google) (1): ring-buffer: Only update pages_touched when a new page is touched Sven Eckelmann (1): batman-adv: Avoid infinite loop trying to resize local TT Tim Harvey (2): arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator Tim Huang (2): drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11 drm/amdgpu: fix incorrect number of active RBs for gfx11 Vikas Gupta (2): bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() bnxt_en: Fix error recovery for RoCE ulp client Ville Syrjälä (6): drm/i915/vrr: Disable VRR when using bigjoiner drm/client: Fully protect modes[] with dev->mode_config.mutex drm/i915/cdclk: Fix CDCLK programming order when pipes are active drm/i915/psr: Disable PSR when bigjoiner is used drm/i915: Disable port sync when bigjoiner is used drm/i915: Disable live M/N updates when using bigjoiner Wachowski, Karol (2): accel/ivpu: Check return code of ipc->lock init accel/ivpu: Fix PCI D0 state entry in resume Wenjing Liu (1): drm/amd/display: always reset ODM mode in context when adding first plane Xiang Chen (1): scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() Xiubo Li (1): ceph: switch to use cap_delay_lock for the unlink delay list Xuchun Shang (1): iommu/vt-d: Fix wrong use of pasid config Yifan Zhang (1): drm/amdgpu: differentiate external rev id for gfx 11.5.0 Yu Kuai (1): raid1: fix use-after-free for original bio in raid1_write_request() Yuquan Wang (1): cxl/mem: Fix for the index of Clear Event Record Handle Zack Rusin (1): drm/vmwgfx: Enable DMA mappings with SEV Zheng Yejian (1): kprobes: Fix possible use-after-free issue on kprobe registration Zhenhua Huang (1): fs/proc: remove redundant comments from /proc/bootconfig

1 year, 1 month

1
1
0 0

Linux 6.1.87

by Greg Kroah-Hartman

I'm announcing the release of the 6.1.87 kernel. All users of the 6.1 kernel series must upgrade. The updated 6.1.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.1.y and can be browsed at the normal kernel.org git web browser: https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Documentation/admin-guide/hw-vuln/spectre.rst | 22 Documentation/admin-guide/kernel-parameters.txt | 12 Makefile | 2 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 arch/x86/Kconfig | 21 arch/x86/events/core.c | 1 arch/x86/include/asm/apic.h | 3 arch/x86/kernel/apic/apic.c | 6 arch/x86/kernel/cpu/bugs.c | 82 +-- arch/x86/kernel/cpu/common.c | 48 +- drivers/ata/libata-scsi.c | 9 drivers/gpu/drm/amd/amdgpu/soc21.c | 27 + drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 1 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 12 drivers/gpu/drm/ast/ast_dp.c | 3 drivers/gpu/drm/drm_client_modeset.c | 3 drivers/gpu/drm/i915/display/intel_cdclk.c | 7 drivers/gpu/drm/i915/display/intel_cdclk.h | 3 drivers/gpu/drm/i915/display/intel_ddi.c | 5 drivers/gpu/drm/i915/display/intel_vrr.c | 7 drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 drivers/gpu/drm/qxl/qxl_release.c | 50 +- drivers/iommu/intel/svm.c | 2 drivers/media/cec/core/cec-adap.c | 14 drivers/net/dsa/mt7530.c | 229 ++++++++-- drivers/net/dsa/mt7530.h | 5 drivers/net/ethernet/amazon/ena/ena_com.c | 2 drivers/net/ethernet/amazon/ena/ena_netdev.c | 35 + drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 20 drivers/net/ethernet/mellanox/mlx5/core/en/qos.c | 33 - drivers/net/ethernet/mellanox/mlx5/core/en/selq.c | 2 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 drivers/net/ethernet/micrel/ks8851.h | 3 drivers/net/ethernet/micrel/ks8851_common.c | 16 drivers/net/ethernet/micrel/ks8851_par.c | 11 drivers/net/ethernet/micrel/ks8851_spi.c | 11 drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 drivers/net/geneve.c | 4 drivers/scsi/hisi_sas/hisi_sas_main.c | 2 drivers/scsi/qla2xxx/qla_edif.c | 2 drivers/vhost/vhost.c | 24 - fs/btrfs/delayed-inode.c | 3 fs/btrfs/qgroup.c | 2 fs/btrfs/transaction.c | 17 fs/smb/client/cached_dir.c | 4 include/linux/dma-fence.h | 7 include/linux/irqflags.h | 2 include/linux/u64_stats_sync.h | 9 include/net/addrconf.h | 4 include/net/af_unix.h | 2 include/net/bluetooth/bluetooth.h | 9 include/net/ip_tunnels.h | 33 + io_uring/net.c | 1 kernel/cpu.c | 3 kernel/kprobes.c | 18 kernel/power/suspend.c | 6 kernel/trace/ring_buffer.c | 6 kernel/trace/trace_events.c | 4 net/batman-adv/translation-table.c | 2 net/bluetooth/hci_request.c | 4 net/bluetooth/l2cap_sock.c | 52 -- net/bluetooth/sco.c | 23 - net/ipv4/netfilter/arp_tables.c | 4 net/ipv4/netfilter/ip_tables.c | 4 net/ipv4/route.c | 4 net/ipv6/addrconf.c | 7 net/ipv6/ip6_fib.c | 7 net/ipv6/netfilter/ip6_tables.c | 4 net/openvswitch/conntrack.c | 5 net/unix/af_unix.c | 8 net/unix/garbage.c | 35 + net/unix/scm.c | 8 net/xdp/xsk.c | 2 tools/testing/selftests/timers/posix_timers.c | 2 77 files changed, 711 insertions(+), 378 deletions(-) Adam Dunlap (1): x86/apic: Force native_apic_mem_read() to use the MOV instruction Alex Constantino (1): Revert "drm/qxl: simplify qxl_fence_wait" Alex Deucher (1): drm/amdgpu: always force full reset for SOC21 Anna-Maria Behnsen (1): PM: s2idle: Make sure CPUs will wakeup directly on resume Arnd Bergmann (5): nouveau: fix function cast warning ipv6: fib: hide unused 'pn' variable ipv4/route: avoid unused-but-set-variable warning tracing: hide unused ftrace_event_id_fops irqflags: Explicitly ignore lockdep_hrtimer_exit() argument Arınç ÜNAL (1): net: dsa: mt7530: trap link-local frames regardless of ST Port State Boris Burkov (3): btrfs: qgroup: correctly model root qgroup rsv in convert btrfs: record delayed inode root in transaction btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans Carolina Jubran (2): net/mlx5e: Fix mlx5e_priv_init() cleanup flow net/mlx5e: HTB, Fix inconsistencies with QoS SQs number Cosmin Ratiu (1): net/mlx5: Properly link new fs rules into the tree Damien Le Moal (1): ata: libata-scsi: Fix ata_scsi_dev_rescan() error path Dan Carpenter (1): scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() Daniel Machon (1): net: sparx5: fix wrong config being used when reconfiguring PCS Daniel Sneddon (1): x86/bugs: Fix return type of spectre_bhi_state() David Arinzon (3): net: ena: Fix potential sign extension issue net: ena: Wrong missing IO completions check order net: ena: Fix incorrect descriptor free behavior Dmitry Antipov (1): Bluetooth: Fix memory leak in hci_req_sync_complete() Eric Dumazet (3): xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING geneve: fix header validation in geneve[6]_xmit_skb netfilter: complete validation of user input Frank Li (1): arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order Fudongwang (1): drm/amd/display: fix disable otg wa logic in DCN316 Gavin Shan (2): vhost: Add smp_rmb() in vhost_vq_avail_empty() vhost: Add smp_rmb() in vhost_enable_notify() Geetha sowjanya (1): octeontx2-af: Fix NIX SQ mode and BP config Greg Kroah-Hartman (1): Linux 6.1.87 Harish Kasiviswanathan (1): drm/amdkfd: Reset GPU on queue preemption failure Ilya Maximets (1): net: openvswitch: fix unwanted error log on timeout policy probing Ingo Molnar (1): x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr' Jacob Pan (1): iommu/vt-d: Allocate local memory for page request queue Jammy Huang (1): drm/ast: Fix soft lockup Jiri Benc (1): ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr John Stultz (1): selftests: timers: Fix abs() warning in posix_timers test Josh Poimboeuf (6): x86/bugs: Fix BHI documentation x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES x86/bugs: Fix BHI handling of RRSBA x86/bugs: Clarify that syscall hardening isn't a BHI mitigation x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI Kuniyuki Iwashima (2): af_unix: Clear stale u->oob_skb. af_unix: Do not use atomic ops for unix_sk(sk)->inflight. Lijo Lazar (1): drm/amdgpu: Reset dGPU if suspend got aborted Luiz Augusto von Dentz (2): Bluetooth: SCO: Fix not validating setsockopt user input Bluetooth: L2CAP: Fix not validating setsockopt user input Marek Vasut (2): net: ks8851: Inline ks8851_rx_skb() net: ks8851: Handle softirqs at the end of IRQ thread to fix hang Michal Luczaj (1): af_unix: Fix garbage collector racing against connect() Namhyung Kim (1): perf/x86: Fix out of range data Nini Song (1): media: cec: core: remove length check of Timer Status Pavan Chebbi (1): bnxt_en: Reset PTP tx_avail after possible firmware reset Pavel Begunkov (1): io_uring/net: restore msg_control on sendzc retry Petr Tesarik (1): u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file Sean Christopherson (1): x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n Steve French (1): smb3: fix Open files on server counter going negative Steven Rostedt (Google) (1): ring-buffer: Only update pages_touched when a new page is touched Sven Eckelmann (1): batman-adv: Avoid infinite loop trying to resize local TT Tim Huang (1): drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11 Ville Syrjälä (4): drm/i915/vrr: Disable VRR when using bigjoiner drm/client: Fully protect modes[] with dev->mode_config.mutex drm/i915/cdclk: Fix CDCLK programming order when pipes are active drm/i915: Disable port sync when bigjoiner is used Xiang Chen (1): scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() Zheng Yejian (1): kprobes: Fix possible use-after-free issue on kprobe registration

1 year, 1 month

1
1
0 0

Linux 5.15.156

by Greg Kroah-Hartman

I'm announcing the release of the 5.15.156 kernel. All users of the 5.15 kernel series must upgrade. The updated 5.15.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.15.y and can be browsed at the normal kernel.org git web browser: https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Documentation/admin-guide/hw-vuln/spectre.rst | 22 - Documentation/admin-guide/kernel-parameters.txt | 12 - Makefile | 2 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 - arch/x86/Kconfig | 21 - arch/x86/events/core.c | 1 arch/x86/include/asm/apic.h | 3 arch/x86/kernel/cpu/bugs.c | 82 +++---- arch/x86/kernel/cpu/common.c | 48 ++-- drivers/gpu/drm/drm_client_modeset.c | 3 drivers/gpu/drm/i915/display/intel_cdclk.c | 7 drivers/gpu/drm/i915/display/intel_cdclk.h | 3 drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 drivers/gpu/drm/qxl/qxl_release.c | 50 +++- drivers/iommu/intel/svm.c | 2 drivers/media/cec/core/cec-adap.c | 14 - drivers/net/dsa/mt7530.c | 229 +++++++++++++++++--- drivers/net/dsa/mt7530.h | 5 drivers/net/ethernet/amazon/ena/ena_com.c | 2 drivers/net/ethernet/amazon/ena/ena_netdev.c | 35 ++- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 20 - drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 drivers/net/geneve.c | 4 drivers/scsi/qla2xxx/qla_edif.c | 2 drivers/vhost/vhost.c | 12 - fs/btrfs/qgroup.c | 2 include/linux/dma-fence.h | 7 include/linux/irqflags.h | 2 include/linux/u64_stats_sync.h | 42 ++- include/net/addrconf.h | 4 include/net/af_unix.h | 2 include/net/ip_tunnels.h | 33 ++ kernel/cpu.c | 3 kernel/trace/ring_buffer.c | 6 kernel/trace/trace_events.c | 4 net/batman-adv/translation-table.c | 2 net/bluetooth/hci_request.c | 4 net/ipv4/netfilter/arp_tables.c | 4 net/ipv4/netfilter/ip_tables.c | 4 net/ipv4/route.c | 4 net/ipv6/addrconf.c | 7 net/ipv6/ip6_fib.c | 7 net/ipv6/netfilter/ip6_tables.c | 4 net/openvswitch/conntrack.c | 5 net/unix/af_unix.c | 8 net/unix/garbage.c | 35 ++- net/unix/scm.c | 8 net/xdp/xsk.c | 2 tools/testing/selftests/timers/posix_timers.c | 2 50 files changed, 553 insertions(+), 253 deletions(-) Adam Dunlap (1): x86/apic: Force native_apic_mem_read() to use the MOV instruction Alex Constantino (1): Revert "drm/qxl: simplify qxl_fence_wait" Arnd Bergmann (5): nouveau: fix function cast warning ipv6: fib: hide unused 'pn' variable ipv4/route: avoid unused-but-set-variable warning tracing: hide unused ftrace_event_id_fops irqflags: Explicitly ignore lockdep_hrtimer_exit() argument Arınç ÜNAL (1): net: dsa: mt7530: trap link-local frames regardless of ST Port State Boris Burkov (1): btrfs: qgroup: correctly model root qgroup rsv in convert Cosmin Ratiu (1): net/mlx5: Properly link new fs rules into the tree Dan Carpenter (1): scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() Daniel Machon (1): net: sparx5: fix wrong config being used when reconfiguring PCS Daniel Sneddon (1): x86/bugs: Fix return type of spectre_bhi_state() David Arinzon (3): net: ena: Fix potential sign extension issue net: ena: Wrong missing IO completions check order net: ena: Fix incorrect descriptor free behavior Dmitry Antipov (1): Bluetooth: Fix memory leak in hci_req_sync_complete() Eric Dumazet (3): xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING geneve: fix header validation in geneve[6]_xmit_skb netfilter: complete validation of user input Frank Li (1): arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order Gavin Shan (1): vhost: Add smp_rmb() in vhost_vq_avail_empty() Geetha sowjanya (1): octeontx2-af: Fix NIX SQ mode and BP config Greg Kroah-Hartman (1): Linux 5.15.156 Ilya Maximets (1): net: openvswitch: fix unwanted error log on timeout policy probing Ingo Molnar (1): x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr' Jacob Pan (1): iommu/vt-d: Allocate local memory for page request queue Jiri Benc (1): ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr John Stultz (1): selftests: timers: Fix abs() warning in posix_timers test Josh Poimboeuf (6): x86/bugs: Fix BHI documentation x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES x86/bugs: Fix BHI handling of RRSBA x86/bugs: Clarify that syscall hardening isn't a BHI mitigation x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI Kuniyuki Iwashima (2): af_unix: Clear stale u->oob_skb. af_unix: Do not use atomic ops for unix_sk(sk)->inflight. Michal Luczaj (1): af_unix: Fix garbage collector racing against connect() Namhyung Kim (1): perf/x86: Fix out of range data Nini Song (1): media: cec: core: remove length check of Timer Status Sean Christopherson (1): x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n Sebastian Andrzej Siewior (1): u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates. Steven Rostedt (Google) (1): ring-buffer: Only update pages_touched when a new page is touched Sven Eckelmann (1): batman-adv: Avoid infinite loop trying to resize local TT Ville Syrjälä (2): drm/client: Fully protect modes[] with dev->mode_config.mutex drm/i915/cdclk: Fix CDCLK programming order when pipes are active

1 year, 1 month

1
1
0 0

[PATCH 2/2] serial: stm32: Reset .throttled state in .startup()

by Uwe Kleine-König

When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable(a)vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- drivers/tty/serial/stm32-usart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 2bea1d7c9858..e1e7bc04c579 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1080,6 +1080,7 @@ static int stm32_usart_startup(struct uart_port *port) val |= USART_CR2_SWAP; writel_relaxed(val, port->membase + ofs->cr2); } + stm32_port->throttled = false; /* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG) -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH 1/2] serial: stm32: Return IRQ_NONE in the ISR if no handling happend

by Uwe Kleine-König

If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable(a)vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> --- drivers/tty/serial/stm32-usart.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 8c66abcfe6ca..2bea1d7c9858 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -849,6 +849,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; unsigned int size; + irqreturn_t ret = IRQ_NONE; sr = readl_relaxed(port->membase + ofs->isr); @@ -857,11 +858,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) (sr & USART_SR_TC)) { stm32_usart_tc_interrupt_disable(port); stm32_usart_rs485_rts_disable(port); + ret = IRQ_HANDLED; } - if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) { writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); + ret = IRQ_HANDLED; + } if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { /* Clear wake up flag and disable wake up interrupt */ @@ -870,6 +874,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); + ret = IRQ_HANDLED; } /* @@ -884,6 +889,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } } @@ -891,6 +897,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_port_lock(port); stm32_usart_transmit_chars(port); uart_port_unlock(port); + ret = IRQ_HANDLED; } /* Receiver timeout irq for DMA RX */ @@ -900,9 +907,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } - return IRQ_HANDLED; + return ret; } static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) -- 2.43.0

1 year, 1 month

1
0
0 0

[PATCH] net: usb: ax88179_178a: avoid writing the mac address before first reading

by Jose Ignacio Tornos Martinez

After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset operation, in which the default mac address from the device is read, is not executed from bind operation and the random address, that is pregenerated just in case, is direclty written the first time in the device, so the default one from the device is not even read. This writing is not dangerous because is volatile and the default mac address is not missed. In order to avoid this, do not allow writing a mac address directly into the device, if the default mac address from the device has not been read yet. cc: stable(a)vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Jarkko Palviainen <jarkko.palviainen(a)gmail.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> --- drivers/net/usb/ax88179_178a.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 69169842fa2f..650bb7b6badf 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -174,6 +174,7 @@ struct ax88179_data { u32 wol_supported; u32 wolopts; u8 disconnecting; + u8 mac_address_read; }; struct ax88179_int_data { @@ -969,9 +970,12 @@ static int ax88179_change_mtu(struct net_device *net, int new_mtu) static int ax88179_set_mac_addr(struct net_device *net, void *p) { struct usbnet *dev = netdev_priv(net); + struct ax88179_data *ax179_data = dev->driver_priv; struct sockaddr *addr = p; int ret; + if (!ax179_data->mac_address_read) + return -EAGAIN; if (netif_running(net)) return -EBUSY; if (!is_valid_ether_addr(addr->sa_data)) @@ -1256,6 +1260,7 @@ static int ax88179_led_setting(struct usbnet *dev) static void ax88179_get_mac_addr(struct usbnet *dev) { + struct ax88179_data *ax179_data = dev->driver_priv; u8 mac[ETH_ALEN]; memset(mac, 0, sizeof(mac)); @@ -1281,6 +1286,9 @@ static void ax88179_get_mac_addr(struct usbnet *dev) ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN, dev->net->dev_addr); + + ax179_data->mac_address_read = 1; + netdev_info(dev->net, "MAC address: %pM\n", dev->net->dev_addr); } static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf) -- 2.44.0

1 year, 1 month

2
4
0 0

[PATCH ver.2 6.1.y 0/6] ASoC: codecs: es8326: fix support (backport from v6.6)

by kovalev＠altlinux.org

Without these patches, all tested laptop models using the es8326 audio codec have no sound from the speakers and headphones, and the headset microphone does not work. Although the initialization of the sound card is successful. -- ver.2: drop a commit that does not affect the fix of functionality; added an explanation that does not work on the current version of the kernel without patches. -- Patches have been successfully tested on the latest 6.1.86 kernel. [PATCH 6.1.y 1/6] ASoC: codecs: ES8326: Add es8326_mute function [PATCH 6.1.y 2/6] ASoC: codecs: ES8326: Change Hp_detect register names [PATCH 6.1.y 3/6] ASoC: codecs: ES8326: Change Volatile Reg function [PATCH 6.1.y 4/6] ASoC: codecs: ES8326: Fix power-up sequence [PATCH 6.1.y 5/6] ASOC: codecs: ES8326: Add calibration support for [PATCH 6.1.y 6/6] ASoC: codecs: ES8326: Update jact detection function

1 year, 1 month

1
6
0 0

[PATCH 6.1 00/69] 6.1.87-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.1.87 release. There are 69 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Wed, 17 Apr 2024 14:19:30 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.87-rc1… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 6.1.87-rc1 Fudongwang <fudong.wang(a)amd.com> drm/amd/display: fix disable otg wa logic in DCN316 Alex Deucher <alexander.deucher(a)amd.com> drm/amdgpu: always force full reset for SOC21 Lijo Lazar <lijo.lazar(a)amd.com> drm/amdgpu: Reset dGPU if suspend got aborted Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915: Disable port sync when bigjoiner is used Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915/cdclk: Fix CDCLK programming order when pipes are active Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Clarify that syscall hardening isn't a BHI mitigation Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Fix BHI handling of RRSBA Ingo Molnar <mingo(a)kernel.org> x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr' Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Fix BHI documentation Daniel Sneddon <daniel.sneddon(a)linux.intel.com> x86/bugs: Fix return type of spectre_bhi_state() Arnd Bergmann <arnd(a)arndb.de> irqflags: Explicitly ignore lockdep_hrtimer_exit() argument Adam Dunlap <acdunlap(a)google.com> x86/apic: Force native_apic_mem_read() to use the MOV instruction John Stultz <jstultz(a)google.com> selftests: timers: Fix abs() warning in posix_timers test Sean Christopherson <seanjc(a)google.com> x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n Namhyung Kim <namhyung(a)kernel.org> perf/x86: Fix out of range data Gavin Shan <gshan(a)redhat.com> vhost: Add smp_rmb() in vhost_enable_notify() Gavin Shan <gshan(a)redhat.com> vhost: Add smp_rmb() in vhost_vq_avail_empty() Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/client: Fully protect modes[] with dev->mode_config.mutex Jammy Huang <jammy_huang(a)aspeedtech.com> drm/ast: Fix soft lockup Harish Kasiviswanathan <Harish.Kasiviswanathan(a)amd.com> drm/amdkfd: Reset GPU on queue preemption failure Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915/vrr: Disable VRR when using bigjoiner Zheng Yejian <zhengyejian1(a)huawei.com> kprobes: Fix possible use-after-free issue on kprobe registration Pavel Begunkov <asml.silence(a)gmail.com> io_uring/net: restore msg_control on sendzc retry Boris Burkov <boris(a)bur.io> btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans Boris Burkov <boris(a)bur.io> btrfs: record delayed inode root in transaction Boris Burkov <boris(a)bur.io> btrfs: qgroup: correctly model root qgroup rsv in convert Jacob Pan <jacob.jun.pan(a)linux.intel.com> iommu/vt-d: Allocate local memory for page request queue Arnd Bergmann <arnd(a)arndb.de> tracing: hide unused ftrace_event_id_fops David Arinzon <darinzon(a)amazon.com> net: ena: Fix incorrect descriptor free behavior David Arinzon <darinzon(a)amazon.com> net: ena: Wrong missing IO completions check order David Arinzon <darinzon(a)amazon.com> net: ena: Fix potential sign extension issue Michal Luczaj <mhal(a)rbox.co> af_unix: Fix garbage collector racing against connect() Kuniyuki Iwashima <kuniyu(a)amazon.com> af_unix: Do not use atomic ops for unix_sk(sk)->inflight. Arınç ÜNAL <arinc.unal(a)arinc9.com> net: dsa: mt7530: trap link-local frames regardless of ST Port State Daniel Machon <daniel.machon(a)microchip.com> net: sparx5: fix wrong config being used when reconfiguring PCS Carolina Jubran <cjubran(a)nvidia.com> net/mlx5e: HTB, Fix inconsistencies with QoS SQs number Carolina Jubran <cjubran(a)nvidia.com> net/mlx5e: Fix mlx5e_priv_init() cleanup flow Cosmin Ratiu <cratiu(a)nvidia.com> net/mlx5: Properly link new fs rules into the tree Eric Dumazet <edumazet(a)google.com> netfilter: complete validation of user input Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Bluetooth: L2CAP: Fix not validating setsockopt user input Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Bluetooth: SCO: Fix not validating setsockopt user input Jiri Benc <jbenc(a)redhat.com> ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Arnd Bergmann <arnd(a)arndb.de> ipv4/route: avoid unused-but-set-variable warning Arnd Bergmann <arnd(a)arndb.de> ipv6: fib: hide unused 'pn' variable Geetha sowjanya <gakula(a)marvell.com> octeontx2-af: Fix NIX SQ mode and BP config Kuniyuki Iwashima <kuniyu(a)amazon.com> af_unix: Clear stale u->oob_skb. Marek Vasut <marex(a)denx.de> net: ks8851: Handle softirqs at the end of IRQ thread to fix hang Marek Vasut <marex(a)denx.de> net: ks8851: Inline ks8851_rx_skb() Pavan Chebbi <pavan.chebbi(a)broadcom.com> bnxt_en: Reset PTP tx_avail after possible firmware reset Eric Dumazet <edumazet(a)google.com> geneve: fix header validation in geneve[6]_xmit_skb Eric Dumazet <edumazet(a)google.com> xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING Petr Tesarik <petr(a)tesarici.cz> u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file Ilya Maximets <i.maximets(a)ovn.org> net: openvswitch: fix unwanted error log on timeout policy probing Dan Carpenter <dan.carpenter(a)linaro.org> scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() Xiang Chen <chenxiang66(a)hisilicon.com> scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() Arnd Bergmann <arnd(a)arndb.de> nouveau: fix function cast warning Alex Constantino <dreaming.about.electric.sheep(a)gmail.com> Revert "drm/qxl: simplify qxl_fence_wait" Frank Li <Frank.Li(a)nxp.com> arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order Nini Song <nini.song(a)mediatek.com> media: cec: core: remove length check of Timer Status Anna-Maria Behnsen <anna-maria(a)linutronix.de> PM: s2idle: Make sure CPUs will wakeup directly on resume Tim Huang <Tim.Huang(a)amd.com> drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11 Dmitry Antipov <dmantipov(a)yandex.ru> Bluetooth: Fix memory leak in hci_req_sync_complete() Steven Rostedt (Google) <rostedt(a)goodmis.org> ring-buffer: Only update pages_touched when a new page is touched Sven Eckelmann <sven(a)narfation.org> batman-adv: Avoid infinite loop trying to resize local TT Damien Le Moal <dlemoal(a)kernel.org> ata: libata-scsi: Fix ata_scsi_dev_rescan() error path Steve French <stfrench(a)microsoft.com> smb3: fix Open files on server counter going negative ------------- Diffstat: Documentation/admin-guide/hw-vuln/spectre.rst | 22 +- Documentation/admin-guide/kernel-parameters.txt | 12 +- Makefile | 4 +- arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 +- arch/x86/Kconfig | 21 +- arch/x86/events/core.c | 1 + arch/x86/include/asm/apic.h | 3 +- arch/x86/kernel/apic/apic.c | 6 +- arch/x86/kernel/cpu/bugs.c | 82 ++++---- arch/x86/kernel/cpu/common.c | 48 ++--- drivers/ata/libata-scsi.c | 9 +- drivers/gpu/drm/amd/amdgpu/soc21.c | 27 ++- .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 1 + .../amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 +- .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 12 +- drivers/gpu/drm/ast/ast_dp.c | 3 + drivers/gpu/drm/drm_client_modeset.c | 3 +- drivers/gpu/drm/i915/display/intel_cdclk.c | 7 +- drivers/gpu/drm/i915/display/intel_cdclk.h | 3 + drivers/gpu/drm/i915/display/intel_ddi.c | 5 + drivers/gpu/drm/i915/display/intel_vrr.c | 7 + .../gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 +- drivers/gpu/drm/qxl/qxl_release.c | 50 ++++- drivers/iommu/intel/svm.c | 2 +- drivers/media/cec/core/cec-adap.c | 14 -- drivers/net/dsa/mt7530.c | 229 ++++++++++++++++++--- drivers/net/dsa/mt7530.h | 5 + drivers/net/ethernet/amazon/ena/ena_com.c | 2 +- drivers/net/ethernet/amazon/ena/ena_netdev.c | 35 ++-- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 + .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 22 +- drivers/net/ethernet/mellanox/mlx5/core/en/qos.c | 33 +-- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c | 2 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 - drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 +- drivers/net/ethernet/micrel/ks8851.h | 3 - drivers/net/ethernet/micrel/ks8851_common.c | 16 +- drivers/net/ethernet/micrel/ks8851_par.c | 11 - drivers/net/ethernet/micrel/ks8851_spi.c | 11 - .../net/ethernet/microchip/sparx5/sparx5_port.c | 4 +- drivers/net/geneve.c | 4 +- drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +- drivers/scsi/qla2xxx/qla_edif.c | 2 +- drivers/vhost/vhost.c | 28 ++- fs/btrfs/delayed-inode.c | 3 + fs/btrfs/qgroup.c | 2 + fs/btrfs/transaction.c | 17 +- fs/smb/client/cached_dir.c | 4 +- include/linux/dma-fence.h | 7 + include/linux/irqflags.h | 2 +- include/linux/u64_stats_sync.h | 9 +- include/net/addrconf.h | 4 + include/net/af_unix.h | 2 +- include/net/bluetooth/bluetooth.h | 9 + include/net/ip_tunnels.h | 33 +++ io_uring/net.c | 1 + kernel/cpu.c | 3 +- kernel/kprobes.c | 18 +- kernel/power/suspend.c | 6 + kernel/trace/ring_buffer.c | 6 +- kernel/trace/trace_events.c | 4 + net/batman-adv/translation-table.c | 2 +- net/bluetooth/hci_request.c | 4 +- net/bluetooth/l2cap_sock.c | 52 ++--- net/bluetooth/sco.c | 23 +-- net/ipv4/netfilter/arp_tables.c | 4 + net/ipv4/netfilter/ip_tables.c | 4 + net/ipv4/route.c | 4 +- net/ipv6/addrconf.c | 7 +- net/ipv6/ip6_fib.c | 7 +- net/ipv6/netfilter/ip6_tables.c | 4 + net/openvswitch/conntrack.c | 5 +- net/unix/af_unix.c | 8 +- net/unix/garbage.c | 35 +++- net/unix/scm.c | 8 +- net/xdp/xsk.c | 2 + tools/testing/selftests/timers/posix_timers.c | 2 +- 77 files changed, 715 insertions(+), 382 deletions(-)

1 year, 1 month

11
79
0 0

[PATCH] USB: serial: option: add support for Fibocom FM650/FG650

by Chuanhong Guo

Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Chuanhong Guo <gch981213(a)gmail.com> Cc: stable(a)vger.kernel.org --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 55a65d941ccb..964d3fffa545 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2277,6 +2277,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) }, /* Fibocom FM650-CN (ECM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ -- 2.44.0

1 year, 1 month

2
3
0 0

[PATCH 5.15 00/45] 5.15.156-rc1 review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.156 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Wed, 17 Apr 2024 14:19:30 +0000. Anything received after that time might be too late. The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.156-r… or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 5.15.156-rc1 Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/i915/cdclk: Fix CDCLK programming order when pipes are active Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Clarify that syscall hardening isn't a BHI mitigation Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Fix BHI handling of RRSBA Ingo Molnar <mingo(a)kernel.org> x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr' Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES Josh Poimboeuf <jpoimboe(a)kernel.org> x86/bugs: Fix BHI documentation Daniel Sneddon <daniel.sneddon(a)linux.intel.com> x86/bugs: Fix return type of spectre_bhi_state() Arnd Bergmann <arnd(a)arndb.de> irqflags: Explicitly ignore lockdep_hrtimer_exit() argument Adam Dunlap <acdunlap(a)google.com> x86/apic: Force native_apic_mem_read() to use the MOV instruction John Stultz <jstultz(a)google.com> selftests: timers: Fix abs() warning in posix_timers test Sean Christopherson <seanjc(a)google.com> x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n Namhyung Kim <namhyung(a)kernel.org> perf/x86: Fix out of range data Gavin Shan <gshan(a)redhat.com> vhost: Add smp_rmb() in vhost_vq_avail_empty() Ville Syrjälä <ville.syrjala(a)linux.intel.com> drm/client: Fully protect modes[] with dev->mode_config.mutex Boris Burkov <boris(a)bur.io> btrfs: qgroup: correctly model root qgroup rsv in convert Jacob Pan <jacob.jun.pan(a)linux.intel.com> iommu/vt-d: Allocate local memory for page request queue Arnd Bergmann <arnd(a)arndb.de> tracing: hide unused ftrace_event_id_fops David Arinzon <darinzon(a)amazon.com> net: ena: Fix incorrect descriptor free behavior David Arinzon <darinzon(a)amazon.com> net: ena: Wrong missing IO completions check order David Arinzon <darinzon(a)amazon.com> net: ena: Fix potential sign extension issue Michal Luczaj <mhal(a)rbox.co> af_unix: Fix garbage collector racing against connect() Kuniyuki Iwashima <kuniyu(a)amazon.com> af_unix: Do not use atomic ops for unix_sk(sk)->inflight. Arınç ÜNAL <arinc.unal(a)arinc9.com> net: dsa: mt7530: trap link-local frames regardless of ST Port State Daniel Machon <daniel.machon(a)microchip.com> net: sparx5: fix wrong config being used when reconfiguring PCS Cosmin Ratiu <cratiu(a)nvidia.com> net/mlx5: Properly link new fs rules into the tree Eric Dumazet <edumazet(a)google.com> netfilter: complete validation of user input Jiri Benc <jbenc(a)redhat.com> ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Arnd Bergmann <arnd(a)arndb.de> ipv4/route: avoid unused-but-set-variable warning Arnd Bergmann <arnd(a)arndb.de> ipv6: fib: hide unused 'pn' variable Geetha sowjanya <gakula(a)marvell.com> octeontx2-af: Fix NIX SQ mode and BP config Kuniyuki Iwashima <kuniyu(a)amazon.com> af_unix: Clear stale u->oob_skb. Eric Dumazet <edumazet(a)google.com> geneve: fix header validation in geneve[6]_xmit_skb Eric Dumazet <edumazet(a)google.com> xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> u64_stats: Disable preemption on 32bit UP+SMP PREEMPT_RT during updates. Ilya Maximets <i.maximets(a)ovn.org> net: openvswitch: fix unwanted error log on timeout policy probing Dan Carpenter <dan.carpenter(a)linaro.org> scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() Arnd Bergmann <arnd(a)arndb.de> nouveau: fix function cast warning Alex Constantino <dreaming.about.electric.sheep(a)gmail.com> Revert "drm/qxl: simplify qxl_fence_wait" Frank Li <Frank.Li(a)nxp.com> arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order Nini Song <nini.song(a)mediatek.com> media: cec: core: remove length check of Timer Status Dmitry Antipov <dmantipov(a)yandex.ru> Bluetooth: Fix memory leak in hci_req_sync_complete() Steven Rostedt (Google) <rostedt(a)goodmis.org> ring-buffer: Only update pages_touched when a new page is touched Sven Eckelmann <sven(a)narfation.org> batman-adv: Avoid infinite loop trying to resize local TT ------------- Diffstat: Documentation/admin-guide/hw-vuln/spectre.rst | 22 +- Documentation/admin-guide/kernel-parameters.txt | 12 +- Makefile | 4 +- arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 12 +- arch/x86/Kconfig | 21 +- arch/x86/events/core.c | 1 + arch/x86/include/asm/apic.h | 3 +- arch/x86/kernel/cpu/bugs.c | 82 ++++---- arch/x86/kernel/cpu/common.c | 48 ++--- drivers/gpu/drm/drm_client_modeset.c | 3 +- drivers/gpu/drm/i915/display/intel_cdclk.c | 7 +- drivers/gpu/drm/i915/display/intel_cdclk.h | 3 + .../gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 +- drivers/gpu/drm/qxl/qxl_release.c | 50 ++++- drivers/iommu/intel/svm.c | 2 +- drivers/media/cec/core/cec-adap.c | 14 -- drivers/net/dsa/mt7530.c | 229 ++++++++++++++++++--- drivers/net/dsa/mt7530.h | 5 + drivers/net/ethernet/amazon/ena/ena_com.c | 2 +- drivers/net/ethernet/amazon/ena/ena_netdev.c | 35 ++-- .../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 22 +- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 +- .../net/ethernet/microchip/sparx5/sparx5_port.c | 4 +- drivers/net/geneve.c | 4 +- drivers/scsi/qla2xxx/qla_edif.c | 2 +- drivers/vhost/vhost.c | 14 +- fs/btrfs/qgroup.c | 2 + include/linux/dma-fence.h | 7 + include/linux/irqflags.h | 2 +- include/linux/u64_stats_sync.h | 42 ++-- include/net/addrconf.h | 4 + include/net/af_unix.h | 2 +- include/net/ip_tunnels.h | 33 +++ kernel/cpu.c | 3 +- kernel/trace/ring_buffer.c | 6 +- kernel/trace/trace_events.c | 4 + net/batman-adv/translation-table.c | 2 +- net/bluetooth/hci_request.c | 4 +- net/ipv4/netfilter/arp_tables.c | 4 + net/ipv4/netfilter/ip_tables.c | 4 + net/ipv4/route.c | 4 +- net/ipv6/addrconf.c | 7 +- net/ipv6/ip6_fib.c | 7 +- net/ipv6/netfilter/ip6_tables.c | 4 + net/openvswitch/conntrack.c | 5 +- net/unix/af_unix.c | 8 +- net/unix/garbage.c | 35 +++- net/unix/scm.c | 8 +- net/xdp/xsk.c | 2 + tools/testing/selftests/timers/posix_timers.c | 2 +- 50 files changed, 556 insertions(+), 256 deletions(-)

1 year, 1 month

9
54
0 0

[Request] backport a mainline patch to Linux kernel-5.10 stable tree

by Bo Ye (叶波)

Dear Reviewers, we suggest to backport a commit to Linux kernel-5.10 stable tree to fix thermal bug. Thanks a lot source patch: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/d… thermal: core: Fix thermal zone suspend-resume synchronization There are 3 synchronization issues with thermal zone suspend-resume during system-wide transitions: 1. The resume code runs in a PM notifier which is invoked after user space has been thawed, so it can run concurrently with user space which can trigger a thermal zone device removal. If that happens, the thermal zone resume code may use a stale pointer to the next list element and crash, because it does not hold thermal_list_lock while walking thermal_tz_list. 2. The thermal zone resume code calls thermal_zone_device_init() outside the zone lock, so user space or an update triggered by the platform firmware may see an inconsistent state of a thermal zone leading to unexpected behavior. 3. Clearing the in_suspend global variable in thermal_pm_notify() allows __thermal_zone_device_update() to continue for all thermal zones and it may as well run before the thermal_tz_list walk (or at any point during the list walk for that matter) and attempt to operate on a thermal zone that has not been resumed yet. It may also race destructively with thermal_zone_device_init(). To address these issues, add thermal_list_lock locking to thermal_pm_notify(), especially arount the thermal_tz_list, make it call thermal_zone_device_init() back-to-back with __thermal_zone_device_update() under the zone lock and replace in_suspend with per-zone bool "suspend" indicators set and unset under the given zone's lock. Link: https://lore.kernel.org/linux-pm/20231218162348.69101-1-bo.ye@mediatek.com/ Reported-by: Bo Ye <bo.ye(a)mediatek.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.co thermal: core: Fix thermal zone suspend-resume synchronization There are 3 synchronization issues with thermal zone suspend-resume during system-wide transitions: 1. The resume code runs in a PM notifier which is invoked after user space has been thawed, so it can run concurrently with user space which can trigger a thermal zone device removal. If that happens, the thermal zone resume code may use a stale pointer to the next list element and crash, because it does not hold thermal_list_lock while walking thermal_tz_list. 2. The thermal zone resume code calls thermal_zone_device_init() outside the zone lock, so user space or an update triggered by the platform firmware may see an inconsistent state of a thermal zone leading to unexpected behavior. 3. Clearing the in_suspend global variable in thermal_pm_notify() allows __thermal_zone_device_update() to continue for all thermal zones and it may as well run before the thermal_tz_list walk (or at any point during the list walk for that matter) and attempt to operate on a thermal zone that has not been resumed yet. It may also race destructively with thermal_zone_device_init(). To address these issues, add thermal_list_lock locking to thermal_pm_notify(), especially arount the thermal_tz_list, make it call thermal_zone_device_init() back-to-back with __thermal_zone_device_update() under the zone lock and replace in_suspend with per-zone bool "suspend" indicators set and unset under the given zone's lock. Link: https://lore.kernel.org/linux-pm/20231218162348.69101-1-bo.ye@mediatek.com/ Reported-by: Bo Ye <bo.ye(a)mediatek.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> BRs Bo Ye

1 year, 1 month

2
1
0 0

撤回: [Request] backport a mainline patch to Linux kernel-5.10 stable tree

by Bo Ye (叶波)

Bo Ye (叶波) 将撤回邮件“[Request] backport a mainline patch to Linux kernel-5.10 stable tree”。

1 year, 1 month

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2024