March 2024 - Linux-stable-mirror

[PATCH] LoongArch: Change __my_cpu_offset definition to avoid mis-optimization

by Huacai Chen

From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of global regs in asms"), global registers will no longer be forced to add to the def-use chain. Then current_thread_info(), current_stack_pointer and __my_cpu_offset may be lifted out of the loop because they are no longer treated as "volatile variables". This optimization is still correct for the current_thread_info() and current_stack_pointer usages because they are associated to a thread. However it is wrong for __my_cpu_offset because it is associated to a CPU rather than a thread: if the thread migrates to a different CPU in the loop, __my_cpu_offset should be changed. Change __my_cpu_offset definition to treat it as a "volatile variable", in order to avoid such a mis-optimization. Cc: stable(a)vger.kernel.org Reported-by: Xiaotian Wu <wuxiaotian(a)loongson.cn> Reported-by: Miao Wang <shankerwangmiao(a)gmail.com> Signed-off-by: Xing Li <lixing(a)loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen(a)loongson.cn> Signed-off-by: Rui Wang <wangrui(a)loongson.cn> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- arch/loongarch/include/asm/percpu.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/loongarch/include/asm/percpu.h b/arch/loongarch/include/asm/percpu.h index 9b36ac003f89..03b98491d301 100644 --- a/arch/loongarch/include/asm/percpu.h +++ b/arch/loongarch/include/asm/percpu.h @@ -29,7 +29,12 @@ static inline void set_my_cpu_offset(unsigned long off) __my_cpu_offset = off; csr_write64(off, PERCPU_BASE_KS); } -#define __my_cpu_offset __my_cpu_offset + +#define __my_cpu_offset \ +({ \ + __asm__ __volatile__("":"+r"(__my_cpu_offset)); \ + __my_cpu_offset; \ +}) #define PERCPU_OP(op, asm_op, c_op) \ static __always_inline unsigned long __percpu_##op(void *ptr, \ -- 2.43.0

9 months, 3 weeks

3
2
0 0

[PATCH v3] serial: mxs-auart: add spinlock around changing cts state

by Emil Kronborg

The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable(a)vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Signed-off-by: Emil Kronborg <emil.kronborg(a)protonmail.com> --- Changes in v3: I misunderstood how additional instructions for the stable team work; sorry about that. Therefore, the only change in this version is the removal of the "Cc" tag, which no longer includes v6.1+ as a prerequisite. Additionally, I included Frank's Reviewed-by in the patch. Since the Fixes commit has been included since v3.18, this patch should be backported to all currently maintained stable kernels. However, for backporting to v6.6 and earlier, either b0af4bcb4946 ("serial: core: Provide port lock wrappers") needs to be included, or those helpers must be open-coded, i.e. doing spin_lock(&s->port.lock); instead of uart_port_lock(&s->port);. drivers/tty/serial/mxs-auart.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4749331fe618..1e8853eae504 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1086,11 +1086,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port, static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istat; + u32 istat, stat; struct mxs_auart_port *s = context; u32 mctrl_temp = s->mctrl_prev; - u32 stat = mxs_read(s, REG_STAT); + uart_port_lock(&s->port); + + stat = mxs_read(s, REG_STAT); istat = mxs_read(s, REG_INTR); /* ack irq */ @@ -1126,6 +1128,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } + uart_port_unlock(&s->port); + return IRQ_HANDLED; } -- 2.44.0

9 months, 3 weeks

1
0
0 0

[PATCH 4.19 5.4 5.15] btrfs: defrag: fix memory leak in btrfs_ioctl_defrag

by Maximilian Heyne

Prior to commit c853a5783ebe ("btrfs: allocate btrfs_ioctl_defrag_range_args on stack") range is allocated on the heap and must be freed. However, commit 173431b274a9 ("btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args") didn't take care of this when it was backported to kernel < 5.15. Add a kfree on the error path for stable kernels that lack commit c853a5783ebe ("btrfs: allocate btrfs_ioctl_defrag_range_args on stack"). This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Fixes: 173431b274a9 ("btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args") CC: stable(a)vger.kernel.org Signed-off-by: Maximilian Heyne <mheyne(a)amazon.de> --- fs/btrfs/ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 049b837934e5..adc6c4f2b53c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3195,6 +3195,7 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) } if (range->flags & ~BTRFS_DEFRAG_RANGE_FLAGS_SUPP) { ret = -EOPNOTSUPP; + kfree(range); goto out; } /* compression requires us to start the IO */ -- 2.40.1 Amazon Development Center Germany GmbH Krausenstr. 38 10117 Berlin Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B Sitz: Berlin Ust-ID: DE 289 237 879

9 months, 3 weeks

3
3
0 0

[PATCH v4 4/4] Bluetooth: qca: fix device-address endianness

by Johan Hovold

The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth device address in big-endian order when setting it using the EDL_WRITE_BD_ADDR_OPCODE command. Presumably, this is the case for all non-ROME devices which all use the EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which use a different command and expect the address in little-endian order). Reverse the little-endian address before setting it to make sure that the address can be configured using tools like btmgmt or using the 'local-bd-address' devicetree property. Note that this can potentially break systems with boot firmware which has started relying on the broken behaviour and is incorrectly passing the address via devicetree in big-endian order. The only device affected by this should be the WCN3991 used in some Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep, the new 'qcom,local-bd-address-broken' property can be used to determine if the firmware is buggy so that the underlying driver bug can be fixed without breaking backwards compatibility. Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so that the address is reversed when parsing the address property. Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable(a)vger.kernel.org # 5.1 Cc: Balakrishna Godavarthi <quic_bgodavar(a)quicinc.com> Cc: Matthias Kaehlcke <mka(a)chromium.org> Tested-by: Nikita Travkin <nikita(a)trvn.ru> # sc7180 Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/bluetooth/btqca.c | 8 ++++++-- drivers/bluetooth/hci_qca.c | 10 ++++++++++ 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index b40b32fa7f1c..19cfc342fc7b 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -826,11 +826,15 @@ EXPORT_SYMBOL_GPL(qca_uart_setup); int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) { + bdaddr_t bdaddr_swapped; struct sk_buff *skb; int err; - skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr, - HCI_EV_VENDOR, HCI_INIT_TIMEOUT); + baswap(&bdaddr_swapped, bdaddr); + + skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, + &bdaddr_swapped, HCI_EV_VENDOR, + HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { err = PTR_ERR(skb); bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err); diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index f989c05f8177..c73481c57741 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -225,6 +225,7 @@ struct qca_serdev { struct qca_power *bt_power; u32 init_speed; u32 oper_speed; + bool bdaddr_property_broken; const char *firmware_name; }; @@ -1842,6 +1843,7 @@ static int qca_setup(struct hci_uart *hu) const char *firmware_name = qca_get_firmware_name(hu); int ret; struct qca_btsoc_version ver; + struct qca_serdev *qcadev; const char *soc_name; ret = qca_check_speeds(hu); @@ -1904,6 +1906,11 @@ static int qca_setup(struct hci_uart *hu) case QCA_WCN6855: case QCA_WCN7850: set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); + + qcadev = serdev_device_get_drvdata(hu->serdev); + if (qcadev->bdaddr_property_broken) + set_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks); + hci_set_aosp_capable(hdev); ret = qca_read_soc_version(hdev, &ver, soc_type); @@ -2284,6 +2291,9 @@ static int qca_serdev_probe(struct serdev_device *serdev) if (!qcadev->oper_speed) BT_DBG("UART will pick default operating speed"); + qcadev->bdaddr_property_broken = device_property_read_bool(&serdev->dev, + "qcom,local-bd-address-broken"); + if (data) qcadev->btsoc_type = data->soc_type; else -- 2.43.2

9 months, 3 weeks

1
0
0 0

[PATCH v4 3/4] Bluetooth: add quirk for broken address properties

by Johan Hovold

Some Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth devicetree bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. Add a new quirk that can be set on platforms with broken firmware and use it to reverse the address when parsing the property so that the underlying driver bug can be fixed. Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable(a)vger.kernel.org # 5.1 Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- include/net/bluetooth/hci.h | 9 +++++++++ net/bluetooth/hci_sync.c | 5 ++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index bdee5d649cc6..191077d8d578 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -176,6 +176,15 @@ enum { */ HCI_QUIRK_USE_BDADDR_PROPERTY, + /* When this quirk is set, the Bluetooth Device Address provided by + * the 'local-bd-address' fwnode property is incorrectly specified in + * big-endian order. + * + * This quirk can be set before hci_register_dev is called or + * during the hdev->setup vendor callback. + */ + HCI_QUIRK_BDADDR_PROPERTY_BROKEN, + /* When this quirk is set, the duplicate filtering during * scanning is based on Bluetooth devices addresses. To allow * RSSI based updates, restart scanning if needed. diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 5716345a26df..283ae8edc1e5 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -3215,7 +3215,10 @@ static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) if (ret < 0 || !bacmp(&ba, BDADDR_ANY)) return; - bacpy(&hdev->public_addr, &ba); + if (test_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks)) + baswap(&hdev->public_addr, &ba); + else + bacpy(&hdev->public_addr, &ba); } struct hci_init_stage { -- 2.43.2

9 months, 3 weeks

1
0
0 0

[PATCH 1/1] mei: vsc: Unregister interrupt handler for system suspend

by Sakari Ailus

Unregister the MEI VSC interrupt handler before system suspend and re-register it at system resume time. This mirrors implementation of other MEI devices. This patch fixes the bug that causes continuous stream of MEI VSC errors after system resume. Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Cc: stable(a)vger.kernel.org # for 6.8 Reported-by: Dominik Brodowski <linux(a)dominikbrodowski.net> Signed-off-by: Wentong Wu <wentong.wu(a)intel.com> Signed-off-by: Sakari Ailus <sakari.ailus(a)linux.intel.com> --- drivers/misc/mei/platform-vsc.c | 17 ++++++- drivers/misc/mei/vsc-tp.c | 84 +++++++++++++++++++++++---------- drivers/misc/mei/vsc-tp.h | 3 ++ 3 files changed, 78 insertions(+), 26 deletions(-) diff --git a/drivers/misc/mei/platform-vsc.c b/drivers/misc/mei/platform-vsc.c index 8d303c6c0000..8db0fcf24e70 100644 --- a/drivers/misc/mei/platform-vsc.c +++ b/drivers/misc/mei/platform-vsc.c @@ -402,25 +402,40 @@ static int mei_vsc_remove(struct platform_device *pdev) static int mei_vsc_suspend(struct device *dev) { struct mei_device *mei_dev = dev_get_drvdata(dev); + struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); mei_stop(mei_dev); + mei_disable_interrupts(mei_dev); + + vsc_tp_free_irq(hw->tp); + return 0; } static int mei_vsc_resume(struct device *dev) { struct mei_device *mei_dev = dev_get_drvdata(dev); + struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); int ret; - ret = mei_restart(mei_dev); + ret = vsc_tp_request_irq(hw->tp); if (ret) return ret; + ret = mei_restart(mei_dev); + if (ret) + goto err_free; + /* start timer if stopped in suspend */ schedule_delayed_work(&mei_dev->timer_work, HZ); return 0; + +err_free: + vsc_tp_free_irq(hw->tp); + + return ret; } static DEFINE_SIMPLE_DEV_PM_OPS(mei_vsc_pm_ops, mei_vsc_suspend, mei_vsc_resume); diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 03486bebae09..870c70ef3bb8 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -94,6 +94,27 @@ static const struct acpi_gpio_mapping vsc_tp_acpi_gpios[] = { {} }; +static irqreturn_t vsc_tp_isr(int irq, void *data) +{ + struct vsc_tp *tp = data; + + atomic_inc(&tp->assert_cnt); + + wake_up(&tp->xfer_wait); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t vsc_tp_thread_isr(int irq, void *data) +{ + struct vsc_tp *tp = data; + + if (tp->event_notify) + tp->event_notify(tp->event_notify_context); + + return IRQ_HANDLED; +} + /* wakeup firmware and wait for response */ static int vsc_tp_wakeup_request(struct vsc_tp *tp) { @@ -383,6 +404,37 @@ int vsc_tp_register_event_cb(struct vsc_tp *tp, vsc_tp_event_cb_t event_cb, } EXPORT_SYMBOL_NS_GPL(vsc_tp_register_event_cb, VSC_TP); +/** + * vsc_tp_request_irq - request irq for vsc_tp device + * @tp: vsc_tp device handle + */ +int vsc_tp_request_irq(struct vsc_tp *tp) +{ + struct spi_device *spi = tp->spi; + struct device *dev = &spi->dev; + int ret; + + irq_set_status_flags(spi->irq, IRQ_DISABLE_UNLAZY); + ret = request_threaded_irq(spi->irq, vsc_tp_isr, vsc_tp_thread_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), tp); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(vsc_tp_request_irq, VSC_TP); + +/** + * vsc_tp_free_irq - free irq for vsc_tp device + * @tp: vsc_tp device handle + */ +void vsc_tp_free_irq(struct vsc_tp *tp) +{ + free_irq(tp->spi->irq, tp); +} +EXPORT_SYMBOL_NS_GPL(vsc_tp_free_irq, VSC_TP); + /** * vsc_tp_intr_synchronize - synchronize vsc_tp interrupt * @tp: vsc_tp device handle @@ -413,27 +465,6 @@ void vsc_tp_intr_disable(struct vsc_tp *tp) } EXPORT_SYMBOL_NS_GPL(vsc_tp_intr_disable, VSC_TP); -static irqreturn_t vsc_tp_isr(int irq, void *data) -{ - struct vsc_tp *tp = data; - - atomic_inc(&tp->assert_cnt); - - wake_up(&tp->xfer_wait); - - return IRQ_WAKE_THREAD; -} - -static irqreturn_t vsc_tp_thread_isr(int irq, void *data) -{ - struct vsc_tp *tp = data; - - if (tp->event_notify) - tp->event_notify(tp->event_notify_context); - - return IRQ_HANDLED; -} - static int vsc_tp_match_any(struct acpi_device *adev, void *data) { struct acpi_device **__adev = data; @@ -485,10 +516,9 @@ static int vsc_tp_probe(struct spi_device *spi) tp->spi = spi; irq_set_status_flags(spi->irq, IRQ_DISABLE_UNLAZY); - ret = devm_request_threaded_irq(dev, spi->irq, vsc_tp_isr, - vsc_tp_thread_isr, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), tp); + ret = request_threaded_irq(spi->irq, vsc_tp_isr, vsc_tp_thread_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), tp); if (ret) return ret; @@ -522,6 +552,8 @@ static int vsc_tp_probe(struct spi_device *spi) err_destroy_lock: mutex_destroy(&tp->mutex); + free_irq(spi->irq, tp); + return ret; } @@ -532,6 +564,8 @@ static void vsc_tp_remove(struct spi_device *spi) platform_device_unregister(tp->pdev); mutex_destroy(&tp->mutex); + + free_irq(spi->irq, tp); } static const struct acpi_device_id vsc_tp_acpi_ids[] = { diff --git a/drivers/misc/mei/vsc-tp.h b/drivers/misc/mei/vsc-tp.h index f9513ddc3e40..14ca195cbddc 100644 --- a/drivers/misc/mei/vsc-tp.h +++ b/drivers/misc/mei/vsc-tp.h @@ -37,6 +37,9 @@ int vsc_tp_xfer(struct vsc_tp *tp, u8 cmd, const void *obuf, size_t olen, int vsc_tp_register_event_cb(struct vsc_tp *tp, vsc_tp_event_cb_t event_cb, void *context); +int vsc_tp_request_irq(struct vsc_tp *tp); +void vsc_tp_free_irq(struct vsc_tp *tp); + void vsc_tp_intr_enable(struct vsc_tp *tp); void vsc_tp_intr_disable(struct vsc_tp *tp); void vsc_tp_intr_synchronize(struct vsc_tp *tp); -- 2.39.2

9 months, 3 weeks

2
4
0 0

[PATCH 12/22] drm/amd/display: Fix bounds check for dcn35 DcfClocks

by Tom Chung

From: Roman Li <roman.li(a)amd.com> [Why] NumFclkLevelsEnabled is used for DcfClocks bounds check instead of designated NumDcfClkLevelsEnabled. That can cause array index out-of-bounds access. [How] Use designated variable for dcn35 DcfClocks bounds check. Fixes: 6b8d9862159f ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr") Cc: Mario Limonciello <mario.limonciello(a)amd.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Reviewed-by: Sun peng Li <sunpeng.li(a)amd.com> Acked-by: Tom Chung <chiahsuan.chung(a)amd.com> Signed-off-by: Roman Li <roman.li(a)amd.com> --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 928d61f9f858..8efde1cfb49a 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -715,7 +715,7 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk clock_table->NumFclkLevelsEnabled; max_fclk = find_max_clk_value(clock_table->FclkClocks_Freq, num_fclk); - num_dcfclk = (clock_table->NumFclkLevelsEnabled > NUM_DCFCLK_DPM_LEVELS) ? NUM_DCFCLK_DPM_LEVELS : + num_dcfclk = (clock_table->NumDcfClkLevelsEnabled > NUM_DCFCLK_DPM_LEVELS) ? NUM_DCFCLK_DPM_LEVELS : clock_table->NumDcfClkLevelsEnabled; for (i = 0; i < num_dcfclk; i++) { int j; -- 2.34.1

9 months, 3 weeks

1
0
0 0

[PATCH 11/22] drm/amd/display: Remove MPC rate control logic from DCN30 and above

by Tom Chung

From: George Shen <george.shen(a)amd.com> [Why] MPC flow rate control is not needed for DCN30 and above. Current logic that uses it can result in underflow for certain edge cases (such as DSC N422 + ODM combine + 422 left edge pixel). [How] Remove MPC flow rate control logic and programming for DCN30 and above. Cc: Mario Limonciello <mario.limonciello(a)amd.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu(a)amd.com> Acked-by: Tom Chung <chiahsuan.chung(a)amd.com> Signed-off-by: George Shen <george.shen(a)amd.com> --- .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c | 54 +++++++++++-------- .../gpu/drm/amd/display/dc/dcn30/dcn30_mpc.h | 14 ++--- .../gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c | 5 +- .../amd/display/dc/hwss/dcn314/dcn314_hwseq.c | 41 -------------- .../amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 41 -------------- .../amd/display/dc/hwss/dcn35/dcn35_hwseq.c | 41 -------------- 6 files changed, 41 insertions(+), 155 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c index bf3386cd444d..5ebb57303130 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.c @@ -44,6 +44,36 @@ #define NUM_ELEMENTS(a) (sizeof(a) / sizeof((a)[0])) +void mpc3_mpc_init(struct mpc *mpc) +{ + struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc); + int opp_id; + + mpc1_mpc_init(mpc); + + for (opp_id = 0; opp_id < MAX_OPP; opp_id++) { + if (REG(MUX[opp_id])) + /* disable mpc out rate and flow control */ + REG_UPDATE_2(MUX[opp_id], MPC_OUT_RATE_CONTROL_DISABLE, + 1, MPC_OUT_FLOW_CONTROL_COUNT, 0); + } +} + +void mpc3_mpc_init_single_inst(struct mpc *mpc, unsigned int mpcc_id) +{ + struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc); + + mpc1_mpc_init_single_inst(mpc, mpcc_id); + + /* assuming mpc out mux is connected to opp with the same index at this + * point in time (e.g. transitioning from vbios to driver) + */ + if (mpcc_id < MAX_OPP && REG(MUX[mpcc_id])) + /* disable mpc out rate and flow control */ + REG_UPDATE_2(MUX[mpcc_id], MPC_OUT_RATE_CONTROL_DISABLE, + 1, MPC_OUT_FLOW_CONTROL_COUNT, 0); +} + bool mpc3_is_dwb_idle( struct mpc *mpc, int dwb_id) @@ -80,25 +110,6 @@ void mpc3_disable_dwb_mux( MPC_DWB0_MUX, 0xf); } -void mpc3_set_out_rate_control( - struct mpc *mpc, - int opp_id, - bool enable, - bool rate_2x_mode, - struct mpc_dwb_flow_control *flow_control) -{ - struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc); - - REG_UPDATE_2(MUX[opp_id], - MPC_OUT_RATE_CONTROL_DISABLE, !enable, - MPC_OUT_RATE_CONTROL, rate_2x_mode); - - if (flow_control) - REG_UPDATE_2(MUX[opp_id], - MPC_OUT_FLOW_CONTROL_MODE, flow_control->flow_ctrl_mode, - MPC_OUT_FLOW_CONTROL_COUNT, flow_control->flow_ctrl_cnt1); -} - enum dc_lut_mode mpc3_get_ogam_current(struct mpc *mpc, int mpcc_id) { /*Contrary to DCN2 and DCN1 wherein a single status register field holds this info; @@ -1490,8 +1501,8 @@ static const struct mpc_funcs dcn30_mpc_funcs = { .read_mpcc_state = mpc3_read_mpcc_state, .insert_plane = mpc1_insert_plane, .remove_mpcc = mpc1_remove_mpcc, - .mpc_init = mpc1_mpc_init, - .mpc_init_single_inst = mpc1_mpc_init_single_inst, + .mpc_init = mpc3_mpc_init, + .mpc_init_single_inst = mpc3_mpc_init_single_inst, .update_blending = mpc2_update_blending, .cursor_lock = mpc1_cursor_lock, .get_mpcc_for_dpp = mpc1_get_mpcc_for_dpp, @@ -1508,7 +1519,6 @@ static const struct mpc_funcs dcn30_mpc_funcs = { .set_dwb_mux = mpc3_set_dwb_mux, .disable_dwb_mux = mpc3_disable_dwb_mux, .is_dwb_idle = mpc3_is_dwb_idle, - .set_out_rate_control = mpc3_set_out_rate_control, .set_gamut_remap = mpc3_set_gamut_remap, .program_shaper = mpc3_program_shaper, .acquire_rmu = mpcc3_acquire_rmu, diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.h index 9cb96ae95a2f..ce93003dae01 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.h +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_mpc.h @@ -1007,6 +1007,13 @@ void dcn30_mpc_construct(struct dcn30_mpc *mpc30, int num_mpcc, int num_rmu); +void mpc3_mpc_init( + struct mpc *mpc); + +void mpc3_mpc_init_single_inst( + struct mpc *mpc, + unsigned int mpcc_id); + bool mpc3_program_shaper( struct mpc *mpc, const struct pwl_params *params, @@ -1078,13 +1085,6 @@ bool mpc3_is_dwb_idle( struct mpc *mpc, int dwb_id); -void mpc3_set_out_rate_control( - struct mpc *mpc, - int opp_id, - bool enable, - bool rate_2x_mode, - struct mpc_dwb_flow_control *flow_control); - void mpc3_power_on_ogam_lut( struct mpc *mpc, int mpcc_id, bool power_on); diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c index e789e654c387..e408e859b355 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c @@ -47,7 +47,7 @@ void mpc32_mpc_init(struct mpc *mpc) struct dcn30_mpc *mpc30 = TO_DCN30_MPC(mpc); int mpcc_id; - mpc1_mpc_init(mpc); + mpc3_mpc_init(mpc); if (mpc->ctx->dc->debug.enable_mem_low_power.bits.mpc) { if (mpc30->mpc_mask->MPCC_MCM_SHAPER_MEM_LOW_PWR_MODE && mpc30->mpc_mask->MPCC_MCM_3DLUT_MEM_LOW_PWR_MODE) { @@ -991,7 +991,7 @@ static const struct mpc_funcs dcn32_mpc_funcs = { .insert_plane = mpc1_insert_plane, .remove_mpcc = mpc1_remove_mpcc, .mpc_init = mpc32_mpc_init, - .mpc_init_single_inst = mpc1_mpc_init_single_inst, + .mpc_init_single_inst = mpc3_mpc_init_single_inst, .update_blending = mpc2_update_blending, .cursor_lock = mpc1_cursor_lock, .get_mpcc_for_dpp = mpc1_get_mpcc_for_dpp, @@ -1008,7 +1008,6 @@ static const struct mpc_funcs dcn32_mpc_funcs = { .set_dwb_mux = mpc3_set_dwb_mux, .disable_dwb_mux = mpc3_disable_dwb_mux, .is_dwb_idle = mpc3_is_dwb_idle, - .set_out_rate_control = mpc3_set_out_rate_control, .set_gamut_remap = mpc3_set_gamut_remap, .program_shaper = mpc32_program_shaper, .program_3dlut = mpc32_program_3dlut, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn314/dcn314_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn314/dcn314_hwseq.c index 3a9cc8ac0c07..093f4387553c 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn314/dcn314_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn314/dcn314_hwseq.c @@ -69,29 +69,6 @@ #define FN(reg_name, field_name) \ hws->shifts->field_name, hws->masks->field_name -static int calc_mpc_flow_ctrl_cnt(const struct dc_stream_state *stream, - int opp_cnt) -{ - bool hblank_halved = optc2_is_two_pixels_per_containter(&stream->timing); - int flow_ctrl_cnt; - - if (opp_cnt >= 2) - hblank_halved = true; - - flow_ctrl_cnt = stream->timing.h_total - stream->timing.h_addressable - - stream->timing.h_border_left - - stream->timing.h_border_right; - - if (hblank_halved) - flow_ctrl_cnt /= 2; - - /* ODM combine 4:1 case */ - if (opp_cnt == 4) - flow_ctrl_cnt /= 2; - - return flow_ctrl_cnt; -} - static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable) { struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; @@ -183,10 +160,6 @@ void dcn314_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx struct pipe_ctx *odm_pipe; int opp_cnt = 0; int opp_inst[MAX_PIPES] = {0}; - bool rate_control_2x_pclk = (pipe_ctx->stream->timing.flags.INTERLACE || optc2_is_two_pixels_per_containter(&pipe_ctx->stream->timing)); - struct mpc_dwb_flow_control flow_control; - struct mpc *mpc = dc->res_pool->mpc; - int i; opp_cnt = get_odm_config(pipe_ctx, opp_inst); @@ -199,20 +172,6 @@ void dcn314_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); - rate_control_2x_pclk = rate_control_2x_pclk || opp_cnt > 1; - flow_control.flow_ctrl_mode = 0; - flow_control.flow_ctrl_cnt0 = 0x80; - flow_control.flow_ctrl_cnt1 = calc_mpc_flow_ctrl_cnt(pipe_ctx->stream, opp_cnt); - if (mpc->funcs->set_out_rate_control) { - for (i = 0; i < opp_cnt; ++i) { - mpc->funcs->set_out_rate_control( - mpc, opp_inst[i], - true, - rate_control_2x_pclk, - &flow_control); - } - } - for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) { odm_pipe->stream_res.opp->funcs->opp_pipe_clock_control( odm_pipe->stream_res.opp, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c index 367dcaeaf186..62ff99463834 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c @@ -970,29 +970,6 @@ void dcn32_init_hw(struct dc *dc) } } -static int calc_mpc_flow_ctrl_cnt(const struct dc_stream_state *stream, - int opp_cnt) -{ - bool hblank_halved = optc2_is_two_pixels_per_containter(&stream->timing); - int flow_ctrl_cnt; - - if (opp_cnt >= 2) - hblank_halved = true; - - flow_ctrl_cnt = stream->timing.h_total - stream->timing.h_addressable - - stream->timing.h_border_left - - stream->timing.h_border_right; - - if (hblank_halved) - flow_ctrl_cnt /= 2; - - /* ODM combine 4:1 case */ - if (opp_cnt == 4) - flow_ctrl_cnt /= 2; - - return flow_ctrl_cnt; -} - static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable) { struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; @@ -1107,10 +1084,6 @@ void dcn32_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx * struct pipe_ctx *odm_pipe; int opp_cnt = 0; int opp_inst[MAX_PIPES] = {0}; - bool rate_control_2x_pclk = (pipe_ctx->stream->timing.flags.INTERLACE || optc2_is_two_pixels_per_containter(&pipe_ctx->stream->timing)); - struct mpc_dwb_flow_control flow_control; - struct mpc *mpc = dc->res_pool->mpc; - int i; opp_cnt = get_odm_config(pipe_ctx, opp_inst); @@ -1123,20 +1096,6 @@ void dcn32_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx * pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); - rate_control_2x_pclk = rate_control_2x_pclk || opp_cnt > 1; - flow_control.flow_ctrl_mode = 0; - flow_control.flow_ctrl_cnt0 = 0x80; - flow_control.flow_ctrl_cnt1 = calc_mpc_flow_ctrl_cnt(pipe_ctx->stream, opp_cnt); - if (mpc->funcs->set_out_rate_control) { - for (i = 0; i < opp_cnt; ++i) { - mpc->funcs->set_out_rate_control( - mpc, opp_inst[i], - true, - rate_control_2x_pclk, - &flow_control); - } - } - for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) { odm_pipe->stream_res.opp->funcs->opp_pipe_clock_control( odm_pipe->stream_res.opp, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c index ad88edebcdfe..cdc53384cb51 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn35/dcn35_hwseq.c @@ -358,29 +358,6 @@ void dcn35_init_hw(struct dc *dc) } } -static int calc_mpc_flow_ctrl_cnt(const struct dc_stream_state *stream, - int opp_cnt) -{ - bool hblank_halved = optc2_is_two_pixels_per_containter(&stream->timing); - int flow_ctrl_cnt; - - if (opp_cnt >= 2) - hblank_halved = true; - - flow_ctrl_cnt = stream->timing.h_total - stream->timing.h_addressable - - stream->timing.h_border_left - - stream->timing.h_border_right; - - if (hblank_halved) - flow_ctrl_cnt /= 2; - - /* ODM combine 4:1 case */ - if (opp_cnt == 4) - flow_ctrl_cnt /= 2; - - return flow_ctrl_cnt; -} - static void update_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable) { struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; @@ -474,10 +451,6 @@ void dcn35_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx * struct pipe_ctx *odm_pipe; int opp_cnt = 0; int opp_inst[MAX_PIPES] = {0}; - bool rate_control_2x_pclk = (pipe_ctx->stream->timing.flags.INTERLACE || optc2_is_two_pixels_per_containter(&pipe_ctx->stream->timing)); - struct mpc_dwb_flow_control flow_control; - struct mpc *mpc = dc->res_pool->mpc; - int i; opp_cnt = get_odm_config(pipe_ctx, opp_inst); @@ -490,20 +463,6 @@ void dcn35_update_odm(struct dc *dc, struct dc_state *context, struct pipe_ctx * pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); - rate_control_2x_pclk = rate_control_2x_pclk || opp_cnt > 1; - flow_control.flow_ctrl_mode = 0; - flow_control.flow_ctrl_cnt0 = 0x80; - flow_control.flow_ctrl_cnt1 = calc_mpc_flow_ctrl_cnt(pipe_ctx->stream, opp_cnt); - if (mpc->funcs->set_out_rate_control) { - for (i = 0; i < opp_cnt; ++i) { - mpc->funcs->set_out_rate_control( - mpc, opp_inst[i], - true, - rate_control_2x_pclk, - &flow_control); - } - } - for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) { odm_pipe->stream_res.opp->funcs->opp_pipe_clock_control( odm_pipe->stream_res.opp, -- 2.34.1

9 months, 3 weeks

1
0
0 0

[PATCH v3 4/9] ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists()

by Baokun Li

We can trigger a slab-out-of-bounds with the following commands: mkfs.ext4 -F /dev/$disk 10G mount /dev/$disk /tmp/test echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc echo test > /tmp/test/file && sync ================================================================== BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11 CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521 Call Trace: dump_stack_lvl+0x2c/0x50 kasan_report+0xb6/0xf0 ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4] ext4_mb_regular_allocator+0x19e9/0x2370 [ext4] ext4_mb_new_blocks+0x88a/0x1370 [ext4] ext4_ext_map_blocks+0x14f7/0x2390 [ext4] ext4_map_blocks+0x569/0xea0 [ext4] ext4_do_writepages+0x10f6/0x1bc0 [ext4] [...] ================================================================== The flow of issue triggering is as follows: // Set s_mb_group_prealloc to 2147483647 via sysfs ext4_mb_new_blocks ext4_mb_normalize_request ext4_mb_normalize_group_request ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc ext4_mb_regular_allocator ext4_mb_choose_next_group ext4_mb_choose_next_group_best_avail mb_avg_fragment_size_order order = fls(len) - 2 = 29 ext4_mb_find_good_group_avg_frag_lists frag_list = &sbi->s_mb_avg_fragment_size[order] if (list_empty(frag_list)) // Trigger SOOB! At 4k block size, the length of the s_mb_avg_fragment_size list is 14, but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds to be triggered by an attempt to access an element at index 29. Add a new attr_id attr_clusters_in_group with values in the range [0, sbi->s_clusters_per_group] and declare mb_group_prealloc as that type to fix the issue. In addition avoid returning an order from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb) and reduce some useless loops. Fixes: 7e170922f06b ("ext4: Add allocation criteria 1.5 (CR1_5)") CC: stable(a)vger.kernel.org Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> --- fs/ext4/mballoc.c | 4 ++++ fs/ext4/sysfs.c | 13 ++++++++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 12b3f196010b..48afe5aa228c 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -831,6 +831,8 @@ static int mb_avg_fragment_size_order(struct super_block *sb, ext4_grpblk_t len) return 0; if (order == MB_NUM_ORDERS(sb)) order--; + if (WARN_ON_ONCE(order > MB_NUM_ORDERS(sb))) + order = MB_NUM_ORDERS(sb) - 1; return order; } @@ -1008,6 +1010,8 @@ static void ext4_mb_choose_next_group_best_avail(struct ext4_allocation_context * goal length. */ order = fls(ac->ac_g_ex.fe_len) - 1; + if (WARN_ON_ONCE(order > MB_NUM_ORDERS(ac->ac_sb) - 1)) + order = MB_NUM_ORDERS(ac->ac_sb) - 1; min_order = order - sbi->s_mb_best_avail_max_trim_order; if (min_order < 0) min_order = 0; diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c index 7f455b5f22c0..ddd71673176c 100644 --- a/fs/ext4/sysfs.c +++ b/fs/ext4/sysfs.c @@ -29,6 +29,7 @@ typedef enum { attr_trigger_test_error, attr_first_error_time, attr_last_error_time, + attr_clusters_in_group, attr_feature, attr_pointer_ui, attr_pointer_ul, @@ -207,13 +208,14 @@ EXT4_ATTR_FUNC(sra_exceeded_retry_limit, 0444); EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, inode_readahead, ext4_sb_info, s_inode_readahead_blks); +EXT4_ATTR_OFFSET(mb_group_prealloc, 0644, clusters_in_group, + ext4_sb_info, s_mb_group_prealloc); EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal); EXT4_RW_ATTR_SBI_UI(mb_stats, s_mb_stats); EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan); EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan); EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs); EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request); -EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc); EXT4_RW_ATTR_SBI_UI(mb_max_linear_groups, s_mb_max_linear_groups); EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb); EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error); @@ -376,6 +378,7 @@ static ssize_t ext4_generic_attr_show(struct ext4_attr *a, switch (a->attr_id) { case attr_inode_readahead: + case attr_clusters_in_group: case attr_pointer_ui: if (a->attr_ptr == ptr_ext4_super_block_offset) return sysfs_emit(buf, "%u\n", le32_to_cpup(ptr)); @@ -455,6 +458,14 @@ static ssize_t ext4_generic_attr_store(struct ext4_attr *a, else *((unsigned int *) ptr) = t; return len; + case attr_clusters_in_group: + ret = kstrtouint(skip_spaces(buf), 0, &t); + if (ret) + return ret; + if (t > sbi->s_clusters_per_group) + return -EINVAL; + *((unsigned int *) ptr) = t; + return len; case attr_pointer_ul: ret = kstrtoul(skip_spaces(buf), 0, &lt); if (ret) -- 2.31.1

9 months, 3 weeks

3
7
0 0

[PATCH v2 1/7] btrfs: scrub: fix incorrectly reported logical/physical address

by Qu Wenruo

[BUG] Scrub is not reporting the correct logical/physical address, it can be verified by the following script: # mkfs.btrfs -f $dev1 # mount $dev1 $mnt # xfs_io -f -c "pwrite -S 0xaa 0 128k" $mnt/file1 # umount $mnt # xfs_io -f -c "pwrite -S 0xff 13647872 4k" $dev1 # mount $dev1 $mnt # btrfs scrub start -fB $mnt # umount $mnt Note above 13647872 is the physical address for logical 13631488 + 4K. Scrub would report the following error: BTRFS error (device dm-2): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488 BTRFS warning (device dm-2): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file1) On the other hand, "btrfs check --check-data-csum" is reporting the correct logical/physical address: Checking filesystem on /dev/test/scratch1 UUID: db2eb621-b09d-4f24-8199-da17dc7b3201 [5/7] checking csums against data mirror 1 bytenr 13647872 csum 0x13fec125 expected csum 0x656bd64e ERROR: errors found in csum tree [CAUSE] In the function scrub_stripe_report_errors(), we always use the stripe->logical and its physical address to print the error message, not taking the sector number into consideration at all. [FIX] Fix the error reporting function by calculating logical/physical with the sector number. Now the scrub report is correct: BTRFS error (device dm-2): unable to fixup (regular) error at logical 13647872 on dev /dev/mapper/test-scratch1 physical 13647872 BTRFS warning (device dm-2): checksum error at logical 13647872 on dev /dev/mapper/test-scratch1, physical 13647872, root 5, inode 257, offset 16384, length 4096, links 1 (path: file1) Fixes: 0096580713ff ("btrfs: scrub: introduce error reporting functionality for scrub_stripe") CC: stable(a)vger.kernel.org #6.4+ Reviewed-by: Anand Jain <anand.jain(a)oracle.com> Reviewed-by: Filipe Manana <fdmanana(a)suse.com> Signed-off-by: Qu Wenruo <wqu(a)suse.com> --- fs/btrfs/scrub.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index fa25004ab04e..72aa74310612 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -870,7 +870,7 @@ static void scrub_stripe_report_errors(struct scrub_ctx *sctx, DEFAULT_RATELIMIT_BURST); struct btrfs_fs_info *fs_info = sctx->fs_info; struct btrfs_device *dev = NULL; - u64 physical = 0; + u64 stripe_physical = stripe->physical; int nr_data_sectors = 0; int nr_meta_sectors = 0; int nr_nodatacsum_sectors = 0; @@ -903,13 +903,17 @@ static void scrub_stripe_report_errors(struct scrub_ctx *sctx, */ if (ret < 0) goto skip; - physical = bioc->stripes[stripe_index].physical; + stripe_physical = bioc->stripes[stripe_index].physical; dev = bioc->stripes[stripe_index].dev; btrfs_put_bioc(bioc); } skip: for_each_set_bit(sector_nr, &stripe->extent_sector_bitmap, stripe->nr_sectors) { + const u64 logical = stripe->logical + + (sector_nr << fs_info->sectorsize_bits); + const u64 physical = stripe_physical + + (sector_nr << fs_info->sectorsize_bits); bool repaired = false; if (stripe->sectors[sector_nr].is_metadata) { @@ -938,12 +942,12 @@ static void scrub_stripe_report_errors(struct scrub_ctx *sctx, if (dev) { btrfs_err_rl_in_rcu(fs_info, "fixed up error at logical %llu on dev %s physical %llu", - stripe->logical, btrfs_dev_name(dev), + logical, btrfs_dev_name(dev), physical); } else { btrfs_err_rl_in_rcu(fs_info, "fixed up error at logical %llu on mirror %u", - stripe->logical, stripe->mirror_num); + logical, stripe->mirror_num); } continue; } @@ -952,26 +956,26 @@ static void scrub_stripe_report_errors(struct scrub_ctx *sctx, if (dev) { btrfs_err_rl_in_rcu(fs_info, "unable to fixup (regular) error at logical %llu on dev %s physical %llu", - stripe->logical, btrfs_dev_name(dev), + logical, btrfs_dev_name(dev), physical); } else { btrfs_err_rl_in_rcu(fs_info, "unable to fixup (regular) error at logical %llu on mirror %u", - stripe->logical, stripe->mirror_num); + logical, stripe->mirror_num); } if (test_bit(sector_nr, &stripe->io_error_bitmap)) if (__ratelimit(&rs) && dev) scrub_print_common_warning("i/o error", dev, false, - stripe->logical, physical); + logical, physical); if (test_bit(sector_nr, &stripe->csum_error_bitmap)) if (__ratelimit(&rs) && dev) scrub_print_common_warning("checksum error", dev, false, - stripe->logical, physical); + logical, physical); if (test_bit(sector_nr, &stripe->meta_error_bitmap)) if (__ratelimit(&rs) && dev) scrub_print_common_warning("header error", dev, false, - stripe->logical, physical); + logical, physical); } spin_lock(&sctx->stat_lock); -- 2.44.0

9 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2024