March 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] USB: UAS: return ENODEV when submit urbs fail with device not" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x cd5432c712351a3d5f82512908f5febfca946ca6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033144-armless-overact-1e1d@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From cd5432c712351a3d5f82512908f5febfca946ca6 Mon Sep 17 00:00:00 2001 From: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Date: Thu, 7 Mar 2024 02:08:14 +0800 Subject: [PATCH] USB: UAS: return ENODEV when submit urbs fail with device not attached In the scenario of entering hibernation with udisk in the system, if the udisk was gone or resume fail in the thaw phase of hibernation. Its state will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed and can't not handle disconnect event. Next, in the poweroff phase of hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk when poweroff this scsi device, which will cause uas_submit_urbs to be called to submit URB for sense/data/cmd pipe. However, these URBs will submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead the SCSI layer go into an ugly loop and system fail to go into hibernation. On the other hand, when we specially check for -ENODEV in function uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device poweroff fail and system shutdown instead of entering hibernation. To fix this issue, let uas_submit_urbs to return original generic error when submitting URB failed. At the same time, we need to translate -ENODEV to DID_NOT_CONNECT for the SCSI layer. Suggested-by: Oliver Neukum <oneukum(a)suse.com> Cc: stable(a)vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 71ace274761f..08953f0d4532 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -533,7 +533,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, * daft to me. */ -static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) +static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) { struct uas_dev_info *devinfo = cmnd->device->hostdata; struct urb *urb; @@ -541,30 +541,28 @@ static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); if (!urb) - return NULL; + return -ENOMEM; usb_anchor_urb(urb, &devinfo->sense_urbs); err = usb_submit_urb(urb, gfp); if (err) { usb_unanchor_urb(urb); uas_log_cmd_state(cmnd, "sense submit err", err); usb_free_urb(urb); - return NULL; } - return urb; + return err; } static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo) { struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); - struct urb *urb; int err; lockdep_assert_held(&devinfo->lock); if (cmdinfo->state & SUBMIT_STATUS_URB) { - urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); - if (!urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); + if (err) + return err; cmdinfo->state &= ~SUBMIT_STATUS_URB; } @@ -572,7 +570,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_FROM_DEVICE); if (!cmdinfo->data_in_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_IN_URB; } @@ -582,7 +580,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_in_urb); uas_log_cmd_state(cmnd, "data in submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_IN_URB; cmdinfo->state |= DATA_IN_URB_INFLIGHT; @@ -592,7 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_TO_DEVICE); if (!cmdinfo->data_out_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_OUT_URB; } @@ -602,7 +600,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_out_urb); uas_log_cmd_state(cmnd, "data out submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; cmdinfo->state |= DATA_OUT_URB_INFLIGHT; @@ -611,7 +609,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); if (!cmdinfo->cmd_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_CMD_URB; } @@ -621,7 +619,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->cmd_urb); uas_log_cmd_state(cmnd, "cmd submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; @@ -698,7 +696,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) * of queueing, no matter how fatal the error */ if (err == -ENODEV) { - set_host_byte(cmnd, DID_ERROR); + set_host_byte(cmnd, DID_NO_CONNECT); scsi_done(cmnd); goto zombie; }

9 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] USB: UAS: return ENODEV when submit urbs fail with device not" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x cd5432c712351a3d5f82512908f5febfca946ca6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033142-wisplike-kindle-7914@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From cd5432c712351a3d5f82512908f5febfca946ca6 Mon Sep 17 00:00:00 2001 From: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Date: Thu, 7 Mar 2024 02:08:14 +0800 Subject: [PATCH] USB: UAS: return ENODEV when submit urbs fail with device not attached In the scenario of entering hibernation with udisk in the system, if the udisk was gone or resume fail in the thaw phase of hibernation. Its state will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed and can't not handle disconnect event. Next, in the poweroff phase of hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk when poweroff this scsi device, which will cause uas_submit_urbs to be called to submit URB for sense/data/cmd pipe. However, these URBs will submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead the SCSI layer go into an ugly loop and system fail to go into hibernation. On the other hand, when we specially check for -ENODEV in function uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device poweroff fail and system shutdown instead of entering hibernation. To fix this issue, let uas_submit_urbs to return original generic error when submitting URB failed. At the same time, we need to translate -ENODEV to DID_NOT_CONNECT for the SCSI layer. Suggested-by: Oliver Neukum <oneukum(a)suse.com> Cc: stable(a)vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 71ace274761f..08953f0d4532 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -533,7 +533,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, * daft to me. */ -static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) +static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) { struct uas_dev_info *devinfo = cmnd->device->hostdata; struct urb *urb; @@ -541,30 +541,28 @@ static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); if (!urb) - return NULL; + return -ENOMEM; usb_anchor_urb(urb, &devinfo->sense_urbs); err = usb_submit_urb(urb, gfp); if (err) { usb_unanchor_urb(urb); uas_log_cmd_state(cmnd, "sense submit err", err); usb_free_urb(urb); - return NULL; } - return urb; + return err; } static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo) { struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); - struct urb *urb; int err; lockdep_assert_held(&devinfo->lock); if (cmdinfo->state & SUBMIT_STATUS_URB) { - urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); - if (!urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); + if (err) + return err; cmdinfo->state &= ~SUBMIT_STATUS_URB; } @@ -572,7 +570,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_FROM_DEVICE); if (!cmdinfo->data_in_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_IN_URB; } @@ -582,7 +580,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_in_urb); uas_log_cmd_state(cmnd, "data in submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_IN_URB; cmdinfo->state |= DATA_IN_URB_INFLIGHT; @@ -592,7 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_TO_DEVICE); if (!cmdinfo->data_out_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_OUT_URB; } @@ -602,7 +600,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_out_urb); uas_log_cmd_state(cmnd, "data out submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; cmdinfo->state |= DATA_OUT_URB_INFLIGHT; @@ -611,7 +609,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); if (!cmdinfo->cmd_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_CMD_URB; } @@ -621,7 +619,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->cmd_urb); uas_log_cmd_state(cmnd, "cmd submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; @@ -698,7 +696,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) * of queueing, no matter how fatal the error */ if (err == -ENODEV) { - set_host_byte(cmnd, DID_ERROR); + set_host_byte(cmnd, DID_NO_CONNECT); scsi_done(cmnd); goto zombie; }

9 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] USB: UAS: return ENODEV when submit urbs fail with device not" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x cd5432c712351a3d5f82512908f5febfca946ca6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033141-prototype-camera-04df@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From cd5432c712351a3d5f82512908f5febfca946ca6 Mon Sep 17 00:00:00 2001 From: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Date: Thu, 7 Mar 2024 02:08:14 +0800 Subject: [PATCH] USB: UAS: return ENODEV when submit urbs fail with device not attached In the scenario of entering hibernation with udisk in the system, if the udisk was gone or resume fail in the thaw phase of hibernation. Its state will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed and can't not handle disconnect event. Next, in the poweroff phase of hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk when poweroff this scsi device, which will cause uas_submit_urbs to be called to submit URB for sense/data/cmd pipe. However, these URBs will submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead the SCSI layer go into an ugly loop and system fail to go into hibernation. On the other hand, when we specially check for -ENODEV in function uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device poweroff fail and system shutdown instead of entering hibernation. To fix this issue, let uas_submit_urbs to return original generic error when submitting URB failed. At the same time, we need to translate -ENODEV to DID_NOT_CONNECT for the SCSI layer. Suggested-by: Oliver Neukum <oneukum(a)suse.com> Cc: stable(a)vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 71ace274761f..08953f0d4532 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -533,7 +533,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, * daft to me. */ -static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) +static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) { struct uas_dev_info *devinfo = cmnd->device->hostdata; struct urb *urb; @@ -541,30 +541,28 @@ static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); if (!urb) - return NULL; + return -ENOMEM; usb_anchor_urb(urb, &devinfo->sense_urbs); err = usb_submit_urb(urb, gfp); if (err) { usb_unanchor_urb(urb); uas_log_cmd_state(cmnd, "sense submit err", err); usb_free_urb(urb); - return NULL; } - return urb; + return err; } static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo) { struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); - struct urb *urb; int err; lockdep_assert_held(&devinfo->lock); if (cmdinfo->state & SUBMIT_STATUS_URB) { - urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); - if (!urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); + if (err) + return err; cmdinfo->state &= ~SUBMIT_STATUS_URB; } @@ -572,7 +570,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_FROM_DEVICE); if (!cmdinfo->data_in_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_IN_URB; } @@ -582,7 +580,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_in_urb); uas_log_cmd_state(cmnd, "data in submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_IN_URB; cmdinfo->state |= DATA_IN_URB_INFLIGHT; @@ -592,7 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_TO_DEVICE); if (!cmdinfo->data_out_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_OUT_URB; } @@ -602,7 +600,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_out_urb); uas_log_cmd_state(cmnd, "data out submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; cmdinfo->state |= DATA_OUT_URB_INFLIGHT; @@ -611,7 +609,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); if (!cmdinfo->cmd_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_CMD_URB; } @@ -621,7 +619,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->cmd_urb); uas_log_cmd_state(cmnd, "cmd submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; @@ -698,7 +696,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) * of queueing, no matter how fatal the error */ if (err == -ENODEV) { - set_host_byte(cmnd, DID_ERROR); + set_host_byte(cmnd, DID_NO_CONNECT); scsi_done(cmnd); goto zombie; }

9 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] USB: UAS: return ENODEV when submit urbs fail with device not" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x cd5432c712351a3d5f82512908f5febfca946ca6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033140-goon-residence-7f8c@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From cd5432c712351a3d5f82512908f5febfca946ca6 Mon Sep 17 00:00:00 2001 From: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Date: Thu, 7 Mar 2024 02:08:14 +0800 Subject: [PATCH] USB: UAS: return ENODEV when submit urbs fail with device not attached In the scenario of entering hibernation with udisk in the system, if the udisk was gone or resume fail in the thaw phase of hibernation. Its state will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed and can't not handle disconnect event. Next, in the poweroff phase of hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk when poweroff this scsi device, which will cause uas_submit_urbs to be called to submit URB for sense/data/cmd pipe. However, these URBs will submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead the SCSI layer go into an ugly loop and system fail to go into hibernation. On the other hand, when we specially check for -ENODEV in function uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device poweroff fail and system shutdown instead of entering hibernation. To fix this issue, let uas_submit_urbs to return original generic error when submitting URB failed. At the same time, we need to translate -ENODEV to DID_NOT_CONNECT for the SCSI layer. Suggested-by: Oliver Neukum <oneukum(a)suse.com> Cc: stable(a)vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc(a)zhaoxin.com> Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 71ace274761f..08953f0d4532 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -533,7 +533,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, * daft to me. */ -static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) +static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) { struct uas_dev_info *devinfo = cmnd->device->hostdata; struct urb *urb; @@ -541,30 +541,28 @@ static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); if (!urb) - return NULL; + return -ENOMEM; usb_anchor_urb(urb, &devinfo->sense_urbs); err = usb_submit_urb(urb, gfp); if (err) { usb_unanchor_urb(urb); uas_log_cmd_state(cmnd, "sense submit err", err); usb_free_urb(urb); - return NULL; } - return urb; + return err; } static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo) { struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); - struct urb *urb; int err; lockdep_assert_held(&devinfo->lock); if (cmdinfo->state & SUBMIT_STATUS_URB) { - urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC); - if (!urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); + if (err) + return err; cmdinfo->state &= ~SUBMIT_STATUS_URB; } @@ -572,7 +570,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_FROM_DEVICE); if (!cmdinfo->data_in_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_IN_URB; } @@ -582,7 +580,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_in_urb); uas_log_cmd_state(cmnd, "data in submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_IN_URB; cmdinfo->state |= DATA_IN_URB_INFLIGHT; @@ -592,7 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, cmnd, DMA_TO_DEVICE); if (!cmdinfo->data_out_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_DATA_OUT_URB; } @@ -602,7 +600,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->data_out_urb); uas_log_cmd_state(cmnd, "data out submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; cmdinfo->state |= DATA_OUT_URB_INFLIGHT; @@ -611,7 +609,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_CMD_URB) { cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); if (!cmdinfo->cmd_urb) - return SCSI_MLQUEUE_DEVICE_BUSY; + return -ENOMEM; cmdinfo->state &= ~ALLOC_CMD_URB; } @@ -621,7 +619,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (err) { usb_unanchor_urb(cmdinfo->cmd_urb); uas_log_cmd_state(cmnd, "cmd submit err", err); - return SCSI_MLQUEUE_DEVICE_BUSY; + return err; } cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; @@ -698,7 +696,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) * of queueing, no matter how fatal the error */ if (err == -ENODEV) { - set_host_byte(cmnd, DID_ERROR); + set_host_byte(cmnd, DID_NO_CONNECT); scsi_done(cmnd); goto zombie; }

9 months, 2 weeks

1
0
0 0

[PATCH 5.15 v2 0/3] Support static calls with LLVM-built kernels

by Thadeu Lima de Souza Cascardo

Otherwise, we see warnings like this: [ 0.000000][ T0] ------------[ cut here ]------------ [ 0.000000][ T0] unexpected static_call insn opcode 0xf at kvm_vcpu_reload_apic_access_page+0x17/0x30 [ 0.000000][ T0] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/static_call.c:88 __static_call_validate+0x68/0x70 [ 0.000000][ T0] Modules linked in: [ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.151-00083-gf200c7260296 #68 fe3cb25cf78cb710722bb5acd1cadddd35172924 [ 0.000000][ T0] RIP: 0010:__static_call_validate+0x68/0x70 [ 0.000000][ T0] Code: 0f b6 4a 04 81 f1 c0 00 00 00 09 c1 74 cc 80 3d be 2c 02 02 00 75 c3 c6 05 b5 2c 02 02 01 48 c7 c7 38 4f c3 82 e8 e8 c8 09 00 <0f> 0b c3 00 00 cc cc 00 53 48 89 fb 48 63 15 31 71 06 02 e8 b0 b8 [ 0.000000][ T0] RSP: 0000:ffffffff82e03e70 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 [ 0.000000][ T0] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 [ 0.000000][ T0] RDX: 0000000000000000 RSI: ffffffff82e03ce0 RDI: 0000000000000001 [ 0.000000][ T0] RBP: 0000000000000001 R08: 00000000ffffffff R09: ffffffff82eaab70 [ 0.000000][ T0] R10: ffffffff82e2e900 R11: 205d305420202020 R12: ffffffff82e51960 [ 0.000000][ T0] R13: ffffffff81038987 R14: ffffffff81038987 R15: 0000000000000001 [ 0.000000][ T0] FS: 0000000000000000(0000) GS:ffffffff83726000(0000) knlGS:0000000000000000 [ 0.000000][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.000000][ T0] CR2: ffff888000014be8 CR3: 00000000037b2000 CR4: 00000000000000a0 [ 0.000000][ T0] Call Trace: [ 0.000000][ T0] <TASK> [ 0.000000][ T0] ? __warn+0x75/0xe0 [ 0.000000][ T0] ? report_bug+0x81/0xe0 [ 0.000000][ T0] ? kvm_vcpu_reload_apic_access_page+0x17/0x30 [ 0.000000][ T0] ? kvm_vcpu_reload_apic_access_page+0x17/0x30 [ 0.000000][ T0] ? early_fixup_exception+0x44/0xa0 [ 0.000000][ T0] ? early_idt_handler_common+0x2f/0x40 [ 0.000000][ T0] ? kvm_vcpu_reload_apic_access_page+0x17/0x30 [ 0.000000][ T0] ? kvm_vcpu_reload_apic_access_page+0x17/0x30 [ 0.000000][ T0] ? __static_call_validate+0x68/0x70 [ 0.000000][ T0] ? arch_static_call_transform+0x5c/0x90 [ 0.000000][ T0] ? __static_call_init+0x1ec/0x230 [ 0.000000][ T0] ? static_call_init+0x32/0x70 [ 0.000000][ T0] ? setup_arch+0x36/0x4f0 [ 0.000000][ T0] ? start_kernel+0x67/0x400 [ 0.000000][ T0] ? secondary_startup_64_no_verify+0xb1/0xbb [ 0.000000][ T0] </TASK> [ 0.000000][ T0] ---[ end trace 8c8589c01f370686 ]--- Peter Zijlstra (3): x86/alternatives: Introduce int3_emulate_jcc() x86/alternatives: Teach text_poke_bp() to patch Jcc.d32 instructions x86/static_call: Add support for Jcc tail-calls arch/x86/include/asm/text-patching.h | 31 +++++++++++++++ arch/x86/kernel/alternative.c | 56 +++++++++++++++++++++++----- arch/x86/kernel/kprobes/core.c | 38 ++++--------------- arch/x86/kernel/static_call.c | 49 ++++++++++++++++++++++-- 4 files changed, 132 insertions(+), 42 deletions(-) -- 2.34.1

9 months, 2 weeks

2
7
0 0

[PATCH] rust: init: remove impl Zeroable for Infallible

by Benno Lossin

From: Laine Taffin Altman <alexanderaltman(a)me.com> It is not enough for a type to be a ZST to guarantee that zeroed memory is a valid value for it; it must also be inhabited. Creating a value of an uninhabited type, ZST or no, is immediate UB. Thus remove the implementation of `Zeroable` for `Infallible`, since that type is not inhabited. Cc: stable(a)vger.kernel.org Fixes: 38cde0bd7b67 ("rust: init: add `Zeroable` trait and `init::zeroed` function") Closes: https://github.com/Rust-for-Linux/pinned-init/pull/13 Signed-off-by: Laine Taffin Altman <alexanderaltman(a)me.com> Signed-off-by: Benno Lossin <benno.lossin(a)proton.me> --- rust/kernel/init.rs | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/rust/kernel/init.rs b/rust/kernel/init.rs index 424257284d16..538e03cfc84a 100644 --- a/rust/kernel/init.rs +++ b/rust/kernel/init.rs @@ -1292,8 +1292,8 @@ macro_rules! impl_zeroable { i8, i16, i32, i64, i128, isize, f32, f64, - // SAFETY: These are ZSTs, there is nothing to zero. - {<T: ?Sized>} PhantomData<T>, core::marker::PhantomPinned, Infallible, (), + // SAFETY: These are inhabited ZSTs, there is nothing to zero and a valid value exists. + {<T: ?Sized>} PhantomData<T>, core::marker::PhantomPinned, (), // SAFETY: Type is allowed to take any value, including all zeros. {<T>} MaybeUninit<T>, base-commit: 768409cff6cc89fe1194da880537a09857b6e4db -- 2.42.0

9 months, 2 weeks

5
12
0 0

Backport "mtd: spinand: Add support for 5-byte IDs" to 6.6, 6.7 and 6.8

by Hauke Mehrtens

Hi, Please backport the following commit back to the Linux stable kernels 6.6, 6.7 and 6.8: commit 34a956739d295de6010cdaafeed698ccbba87ea4 Author: Ezra Buehler <ezra.buehler(a)husqvarnagroup.com> Date: Thu Jan 25 22:01:07 2024 +0200 mtd: spinand: Add support for 5-byte IDs E.g. ESMT chips will return an identification code with a length of 5 bytes. In order to prevent ambiguity, flash chips would actually need to return IDs that are up to 17 or more bytes long due to JEDEC's continuation scheme. I understand that if a manufacturer ID is located in bank N of JEDEC's database (there are currently 16 banks), N - 1 continuation codes (7Fh) need to be added to the identification code (comprising of manufacturer ID and device ID). However, most flash chip manufacturers don't seem to implement this (correctly). Signed-off-by: Ezra Buehler <ezra.buehler(a)husqvarnagroup.com> Reviewed-by: Martin Kurbanov <mmkurbanov(a)salutedevices.com> Tested-by: Martin Kurbanov <mmkurbanov(a)salutedevices.com> Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240125200108.24374-2-ezra@easyb.ch This will fix a regression introduced between Linux kernel 6.6.22 and 6.6.23 in OpenWrt. The esmt NAND flash is not detected any more: <3>[ 0.885607] spi-nand spi0.0: unknown raw ID c8017f7f <4>[ 0.890852] spi-nand: probe of spi0.0 failed with error -524 See: https://github.com/openwrt/openwrt/pull/14992 The following commit was backported to 6.6.22, but the commit it depends on was not backported. commit 4bd14b2fd8a83a2f5220ba4ef323f741e11bfdfd Author: Ezra Buehler <ezra.buehler(a)husqvarnagroup.com> Date: Thu Jan 25 22:01:08 2024 +0200 mtd: spinand: esmt: Extend IDs to 5 bytes Hauke

9 months, 2 weeks

2
1
0 0

FAILED: patch "[PATCH] drm/i915: Pre-populate the cursor physical dma address" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033018-corsage-bacteria-dd67@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala(a)linux.intel.com> Date: Mon, 25 Mar 2024 19:57:38 +0200 Subject: [PATCH] drm/i915: Pre-populate the cursor physical dma address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Calling i915_gem_object_get_dma_address() from the vblank evade critical section triggers might_sleep(). While we know that we've already pinned the framebuffer and thus i915_gem_object_get_dma_address() will in fact not sleep in this case, it seems reasonable to keep the unconditional might_sleep() for maximum coverage. So let's instead pre-populate the dma address during fb pinning, which all happens before we enter the vblank evade critical section. We can use u32 for the dma address as this class of hardware doesn't support >32bit addresses. Cc: stable(a)vger.kernel.org Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked") Reported-by: Borislav Petkov <bp(a)alien8.de> Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_cra… Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.s… Tested-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah(a)intel.com> (cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c index f8b33999d43f..0d3da55e1c24 100644 --- a/drivers/gpu/drm/i915/display/intel_cursor.c +++ b/drivers/gpu/drm/i915/display/intel_cursor.c @@ -36,12 +36,10 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev); - const struct drm_framebuffer *fb = plane_state->hw.fb; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); u32 base; if (DISPLAY_INFO(dev_priv)->cursor_needs_physical) - base = i915_gem_object_get_dma_address(obj, 0); + base = plane_state->phys_dma_addr; else base = intel_plane_ggtt_offset(plane_state); diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index e67cd5b02e84..9104f18753b4 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -727,6 +727,7 @@ struct intel_plane_state { #define PLANE_HAS_FENCE BIT(0) struct intel_fb_view view; + u32 phys_dma_addr; /* for cursor_needs_physical */ /* Plane pxp decryption state */ bool decrypt; diff --git a/drivers/gpu/drm/i915/display/intel_fb_pin.c b/drivers/gpu/drm/i915/display/intel_fb_pin.c index 7b42aef37d2f..b6df9baf481b 100644 --- a/drivers/gpu/drm/i915/display/intel_fb_pin.c +++ b/drivers/gpu/drm/i915/display/intel_fb_pin.c @@ -255,6 +255,16 @@ int intel_plane_pin_fb(struct intel_plane_state *plane_state) return PTR_ERR(vma); plane_state->ggtt_vma = vma; + + /* + * Pre-populate the dma address before we enter the vblank + * evade critical section as i915_gem_object_get_dma_address() + * will trigger might_sleep() even if it won't actually sleep, + * which is the case when the fb has already been pinned. + */ + if (phys_cursor) + plane_state->phys_dma_addr = + i915_gem_object_get_dma_address(intel_fb_obj(fb), 0); } else { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);

9 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] drm/i915: Pre-populate the cursor physical dma address" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033016-jot-effects-834f@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala(a)linux.intel.com> Date: Mon, 25 Mar 2024 19:57:38 +0200 Subject: [PATCH] drm/i915: Pre-populate the cursor physical dma address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Calling i915_gem_object_get_dma_address() from the vblank evade critical section triggers might_sleep(). While we know that we've already pinned the framebuffer and thus i915_gem_object_get_dma_address() will in fact not sleep in this case, it seems reasonable to keep the unconditional might_sleep() for maximum coverage. So let's instead pre-populate the dma address during fb pinning, which all happens before we enter the vblank evade critical section. We can use u32 for the dma address as this class of hardware doesn't support >32bit addresses. Cc: stable(a)vger.kernel.org Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked") Reported-by: Borislav Petkov <bp(a)alien8.de> Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_cra… Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.s… Tested-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah(a)intel.com> (cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c index f8b33999d43f..0d3da55e1c24 100644 --- a/drivers/gpu/drm/i915/display/intel_cursor.c +++ b/drivers/gpu/drm/i915/display/intel_cursor.c @@ -36,12 +36,10 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev); - const struct drm_framebuffer *fb = plane_state->hw.fb; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); u32 base; if (DISPLAY_INFO(dev_priv)->cursor_needs_physical) - base = i915_gem_object_get_dma_address(obj, 0); + base = plane_state->phys_dma_addr; else base = intel_plane_ggtt_offset(plane_state); diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index e67cd5b02e84..9104f18753b4 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -727,6 +727,7 @@ struct intel_plane_state { #define PLANE_HAS_FENCE BIT(0) struct intel_fb_view view; + u32 phys_dma_addr; /* for cursor_needs_physical */ /* Plane pxp decryption state */ bool decrypt; diff --git a/drivers/gpu/drm/i915/display/intel_fb_pin.c b/drivers/gpu/drm/i915/display/intel_fb_pin.c index 7b42aef37d2f..b6df9baf481b 100644 --- a/drivers/gpu/drm/i915/display/intel_fb_pin.c +++ b/drivers/gpu/drm/i915/display/intel_fb_pin.c @@ -255,6 +255,16 @@ int intel_plane_pin_fb(struct intel_plane_state *plane_state) return PTR_ERR(vma); plane_state->ggtt_vma = vma; + + /* + * Pre-populate the dma address before we enter the vblank + * evade critical section as i915_gem_object_get_dma_address() + * will trigger might_sleep() even if it won't actually sleep, + * which is the case when the fb has already been pinned. + */ + if (phys_cursor) + plane_state->phys_dma_addr = + i915_gem_object_get_dma_address(intel_fb_obj(fb), 0); } else { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);

9 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] drm/i915: Pre-populate the cursor physical dma address" failed to apply to 6.7-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.7-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.7.y git checkout FETCH_HEAD git cherry-pick -x 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024033015-handcart-chaos-edcc@gregkh' --subject-prefix 'PATCH 6.7.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 582dc04b0658ef3b90aeb49cbdd9747c2f1eccc3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala(a)linux.intel.com> Date: Mon, 25 Mar 2024 19:57:38 +0200 Subject: [PATCH] drm/i915: Pre-populate the cursor physical dma address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Calling i915_gem_object_get_dma_address() from the vblank evade critical section triggers might_sleep(). While we know that we've already pinned the framebuffer and thus i915_gem_object_get_dma_address() will in fact not sleep in this case, it seems reasonable to keep the unconditional might_sleep() for maximum coverage. So let's instead pre-populate the dma address during fb pinning, which all happens before we enter the vblank evade critical section. We can use u32 for the dma address as this class of hardware doesn't support >32bit addresses. Cc: stable(a)vger.kernel.org Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked") Reported-by: Borislav Petkov <bp(a)alien8.de> Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_cra… Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.s… Tested-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah(a)intel.com> (cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c index f8b33999d43f..0d3da55e1c24 100644 --- a/drivers/gpu/drm/i915/display/intel_cursor.c +++ b/drivers/gpu/drm/i915/display/intel_cursor.c @@ -36,12 +36,10 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev); - const struct drm_framebuffer *fb = plane_state->hw.fb; - struct drm_i915_gem_object *obj = intel_fb_obj(fb); u32 base; if (DISPLAY_INFO(dev_priv)->cursor_needs_physical) - base = i915_gem_object_get_dma_address(obj, 0); + base = plane_state->phys_dma_addr; else base = intel_plane_ggtt_offset(plane_state); diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index e67cd5b02e84..9104f18753b4 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -727,6 +727,7 @@ struct intel_plane_state { #define PLANE_HAS_FENCE BIT(0) struct intel_fb_view view; + u32 phys_dma_addr; /* for cursor_needs_physical */ /* Plane pxp decryption state */ bool decrypt; diff --git a/drivers/gpu/drm/i915/display/intel_fb_pin.c b/drivers/gpu/drm/i915/display/intel_fb_pin.c index 7b42aef37d2f..b6df9baf481b 100644 --- a/drivers/gpu/drm/i915/display/intel_fb_pin.c +++ b/drivers/gpu/drm/i915/display/intel_fb_pin.c @@ -255,6 +255,16 @@ int intel_plane_pin_fb(struct intel_plane_state *plane_state) return PTR_ERR(vma); plane_state->ggtt_vma = vma; + + /* + * Pre-populate the dma address before we enter the vblank + * evade critical section as i915_gem_object_get_dma_address() + * will trigger might_sleep() even if it won't actually sleep, + * which is the case when the fb has already been pinned. + */ + if (phys_cursor) + plane_state->phys_dma_addr = + i915_gem_object_get_dma_address(intel_fb_obj(fb), 0); } else { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);

9 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2024