February 2024 - Linux-stable-mirror

[PATCH 5.4.y 0/2] KVM: arm64: VGIC ITS fix backports

by Oliver Upton

Oliver Upton (2): KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table() KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler virt/kvm/arm/vgic/vgic-its.c | 5 +++++ 1 file changed, 5 insertions(+) base-commit: 6e1f54a4985b63bc1b55a09e5e75a974c5d6719b -- 2.44.0.rc1.240.g4c46232300-goog

1 year, 8 months

1
2
0 0

FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 04b57c9e096a9479fe0ad31e3956e336fa589cb2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021924-setback-disinfect-0bd6@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)") b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 04b57c9e096a9479fe0ad31e3956e336fa589cb2 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Wed, 31 Jan 2024 22:49:54 +0100 Subject: [PATCH] selftests: mptcp: join: stop transfer when check is done (part 2) Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments. While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'. Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: stable(a)vger.kernel.org Reviewed-and-tested-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 85bcc95f4ede..c07386e21e0a 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -643,13 +643,6 @@ kill_events_pids() mptcp_lib_kill_wait $evts_ns2_pid } -kill_tests_wait() -{ - #shellcheck disable=SC2046 - kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1) - wait -} - pm_nl_set_limits() { local ns=$1 @@ -3494,7 +3487,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm remove initial subflow @@ -3518,7 +3511,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm send RM_ADDR for ID 0 @@ -3544,7 +3537,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi } @@ -3558,7 +3551,8 @@ endpoint_tests() pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal speed=slow \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! wait_mpj $ns1 pm_nl_check_endpoint "creation" \ @@ -3573,7 +3567,7 @@ endpoint_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi if reset "delete and re-add" && @@ -3582,7 +3576,8 @@ endpoint_tests() pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow test_linkfail=4 speed=20 \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! wait_mpj $ns2 chk_subflow_nr "before delete" 2 @@ -3597,7 +3592,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "after re-add" 2 chk_mptcp_info subflows 1 subflows 1 - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi }

1 year, 8 months

2
1
0 0

FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 31ee4ad86afd6ed6f4bb1b38c43011216080c42a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021917-nuzzle-magenta-7de4@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)") 80775412882e ("selftests: mptcp: add chk_subflows_total helper") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 31ee4ad86afd6ed6f4bb1b38c43011216080c42a Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Wed, 31 Jan 2024 22:49:53 +0100 Subject: [PATCH] selftests: mptcp: join: stop transfer when check is done (part 1) Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments. Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable(a)vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable(a)vger.kernel.org # 6.5.x Reviewed-and-tested-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 3a5b63026191..85bcc95f4ede 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3453,7 +3453,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm create destroy subflow @@ -3475,7 +3475,7 @@ userspace_tests() chk_mptcp_info subflows 0 subflows 0 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm create id 0 subflow

1 year, 8 months

2
1
0 0

[PATCH 6.6.y] mptcp: userspace pm send RM_ADDR for ID 0

by Matthieu Baerts (NGI0)

From: Geliang Tang <geliang.tang(a)suse.com> This patch adds the ability to send RM_ADDR for local ID 0. Check whether id 0 address is removed, if not, put id 0 into a removing list, pass it to mptcp_pm_remove_addr() to remove id 0 address. There is no reason not to allow the userspace to remove the initial address (ID 0). This special case was not taken into account not letting the userspace to delete all addresses as announced. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/379 Reviewed-by: Matthieu Baerts <matttbe(a)kernel.org> Signed-off-by: Geliang Tang <geliang.tang(a)suse.com> Signed-off-by: Mat Martineau <martineau(a)kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-3-db8f25f798eb… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> (cherry picked from commit 84c531f54ad9a124a924c9505d74e33d16965146) Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE") Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - As mentioned in [1], the 'Fixes' tag has been accidentally dropped: [1] https://lore.kernel.org/stable/a7a3675a-4531-4559-bea2-c7689317764a@kernel.… - Conflict in pm_userspace.c because the new helper function expected to be on top of mptcp_pm_nl_remove_doit() which has been recently renamed in commit 1e07938e29c5 ("net: mptcp: rename netlink handlers to mptcp_pm_nl_<blah>_{doit,dumpit}"). --- net/mptcp/pm_userspace.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/net/mptcp/pm_userspace.c b/net/mptcp/pm_userspace.c index 3b34b7cf56c9..ecd166ce047d 100644 --- a/net/mptcp/pm_userspace.c +++ b/net/mptcp/pm_userspace.c @@ -220,6 +220,40 @@ int mptcp_nl_cmd_announce(struct sk_buff *skb, struct genl_info *info) return err; } +static int mptcp_userspace_pm_remove_id_zero_address(struct mptcp_sock *msk, + struct genl_info *info) +{ + struct mptcp_rm_list list = { .nr = 0 }; + struct mptcp_subflow_context *subflow; + struct sock *sk = (struct sock *)msk; + bool has_id_0 = false; + int err = -EINVAL; + + lock_sock(sk); + mptcp_for_each_subflow(msk, subflow) { + if (subflow->local_id == 0) { + has_id_0 = true; + break; + } + } + if (!has_id_0) { + GENL_SET_ERR_MSG(info, "address with id 0 not found"); + goto remove_err; + } + + list.ids[list.nr++] = 0; + + spin_lock_bh(&msk->pm.lock); + mptcp_pm_remove_addr(msk, &list); + spin_unlock_bh(&msk->pm.lock); + + err = 0; + +remove_err: + release_sock(sk); + return err; +} + int mptcp_nl_cmd_remove(struct sk_buff *skb, struct genl_info *info) { struct nlattr *token = info->attrs[MPTCP_PM_ATTR_TOKEN]; @@ -251,6 +285,11 @@ int mptcp_nl_cmd_remove(struct sk_buff *skb, struct genl_info *info) goto remove_err; } + if (id_val == 0) { + err = mptcp_userspace_pm_remove_id_zero_address(msk, info); + goto remove_err; + } + lock_sock((struct sock *)msk); list_for_each_entry(entry, &msk->pm.userspace_pm_local_addr_list, list) { -- 2.43.0

1 year, 8 months

1
0
0 0

FAILED: patch "[PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x b820de741ae48ccf50dd95e297889c286ff4f760 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024022601-stem-comfort-1bb5@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") 9cf3516c29e6 ("fs: add IOCB flags related to passing back dio completions") f6c73a11133e ("fs.h: Add TRACE_IOCB_STRINGS for use in trace points") 1da8cf961bb1 ("Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b820de741ae48ccf50dd95e297889c286ff4f760 Mon Sep 17 00:00:00 2001 From: Bart Van Assche <bvanassche(a)acm.org> Date: Thu, 15 Feb 2024 12:47:38 -0800 Subject: [PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe(a)kernel.dk> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Avi Kivity <avi(a)scylladb.com> Cc: Sandeep Dhavale <dhavale(a)google.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet(a)linux.dev> Cc: stable(a)vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche(a)acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner(a)kernel.org> diff --git a/fs/aio.c b/fs/aio.c index bb2ff48991f3..da18dbcfcb22 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -593,6 +593,13 @@ void kiocb_set_cancel_fn(struct kiocb *iocb, kiocb_cancel_fn *cancel) struct kioctx *ctx = req->ki_ctx; unsigned long flags; + /* + * kiocb didn't come from aio or is neither a read nor a write, hence + * ignore it. + */ + if (!(iocb->ki_flags & IOCB_AIO_RW)) + return; + if (WARN_ON_ONCE(!list_empty(&req->ki_list))) return; @@ -1509,7 +1516,7 @@ static int aio_prep_rw(struct kiocb *req, const struct iocb *iocb) req->ki_complete = aio_complete_rw; req->private = NULL; req->ki_pos = iocb->aio_offset; - req->ki_flags = req->ki_filp->f_iocb_flags; + req->ki_flags = req->ki_filp->f_iocb_flags | IOCB_AIO_RW; if (iocb->aio_flags & IOCB_FLAG_RESFD) req->ki_flags |= IOCB_EVENTFD; if (iocb->aio_flags & IOCB_FLAG_IOPRIO) { diff --git a/include/linux/fs.h b/include/linux/fs.h index ed5966a70495..c2dcc98cb4c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -352,6 +352,8 @@ enum rw_hint { * unrelated IO (like cache flushing, new IO generation, etc). */ #define IOCB_DIO_CALLER_COMP (1 << 22) +/* kiocb is a read or write operation submitted by fs/aio.c. */ +#define IOCB_AIO_RW (1 << 23) /* for use in trace events */ #define TRACE_IOCB_STRINGS \

1 year, 8 months

2
1
0 0

FAILED: patch "[PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x b820de741ae48ccf50dd95e297889c286ff4f760 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024022654-stainless-aground-196f@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") 9cf3516c29e6 ("fs: add IOCB flags related to passing back dio completions") f6c73a11133e ("fs.h: Add TRACE_IOCB_STRINGS for use in trace points") 1da8cf961bb1 ("Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b820de741ae48ccf50dd95e297889c286ff4f760 Mon Sep 17 00:00:00 2001 From: Bart Van Assche <bvanassche(a)acm.org> Date: Thu, 15 Feb 2024 12:47:38 -0800 Subject: [PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe(a)kernel.dk> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Avi Kivity <avi(a)scylladb.com> Cc: Sandeep Dhavale <dhavale(a)google.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet(a)linux.dev> Cc: stable(a)vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche(a)acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner(a)kernel.org> diff --git a/fs/aio.c b/fs/aio.c index bb2ff48991f3..da18dbcfcb22 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -593,6 +593,13 @@ void kiocb_set_cancel_fn(struct kiocb *iocb, kiocb_cancel_fn *cancel) struct kioctx *ctx = req->ki_ctx; unsigned long flags; + /* + * kiocb didn't come from aio or is neither a read nor a write, hence + * ignore it. + */ + if (!(iocb->ki_flags & IOCB_AIO_RW)) + return; + if (WARN_ON_ONCE(!list_empty(&req->ki_list))) return; @@ -1509,7 +1516,7 @@ static int aio_prep_rw(struct kiocb *req, const struct iocb *iocb) req->ki_complete = aio_complete_rw; req->private = NULL; req->ki_pos = iocb->aio_offset; - req->ki_flags = req->ki_filp->f_iocb_flags; + req->ki_flags = req->ki_filp->f_iocb_flags | IOCB_AIO_RW; if (iocb->aio_flags & IOCB_FLAG_RESFD) req->ki_flags |= IOCB_EVENTFD; if (iocb->aio_flags & IOCB_FLAG_IOPRIO) { diff --git a/include/linux/fs.h b/include/linux/fs.h index ed5966a70495..c2dcc98cb4c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -352,6 +352,8 @@ enum rw_hint { * unrelated IO (like cache flushing, new IO generation, etc). */ #define IOCB_DIO_CALLER_COMP (1 << 22) +/* kiocb is a read or write operation submitted by fs/aio.c. */ +#define IOCB_AIO_RW (1 << 23) /* for use in trace events */ #define TRACE_IOCB_STRINGS \

1 year, 8 months

2
1
0 0

FAILED: patch "[PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x b820de741ae48ccf50dd95e297889c286ff4f760 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024022653-schedule-unloaded-e4ed@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") 9cf3516c29e6 ("fs: add IOCB flags related to passing back dio completions") f6c73a11133e ("fs.h: Add TRACE_IOCB_STRINGS for use in trace points") 1da8cf961bb1 ("Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b820de741ae48ccf50dd95e297889c286ff4f760 Mon Sep 17 00:00:00 2001 From: Bart Van Assche <bvanassche(a)acm.org> Date: Thu, 15 Feb 2024 12:47:38 -0800 Subject: [PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe(a)kernel.dk> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Avi Kivity <avi(a)scylladb.com> Cc: Sandeep Dhavale <dhavale(a)google.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet(a)linux.dev> Cc: stable(a)vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche(a)acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner(a)kernel.org> diff --git a/fs/aio.c b/fs/aio.c index bb2ff48991f3..da18dbcfcb22 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -593,6 +593,13 @@ void kiocb_set_cancel_fn(struct kiocb *iocb, kiocb_cancel_fn *cancel) struct kioctx *ctx = req->ki_ctx; unsigned long flags; + /* + * kiocb didn't come from aio or is neither a read nor a write, hence + * ignore it. + */ + if (!(iocb->ki_flags & IOCB_AIO_RW)) + return; + if (WARN_ON_ONCE(!list_empty(&req->ki_list))) return; @@ -1509,7 +1516,7 @@ static int aio_prep_rw(struct kiocb *req, const struct iocb *iocb) req->ki_complete = aio_complete_rw; req->private = NULL; req->ki_pos = iocb->aio_offset; - req->ki_flags = req->ki_filp->f_iocb_flags; + req->ki_flags = req->ki_filp->f_iocb_flags | IOCB_AIO_RW; if (iocb->aio_flags & IOCB_FLAG_RESFD) req->ki_flags |= IOCB_EVENTFD; if (iocb->aio_flags & IOCB_FLAG_IOPRIO) { diff --git a/include/linux/fs.h b/include/linux/fs.h index ed5966a70495..c2dcc98cb4c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -352,6 +352,8 @@ enum rw_hint { * unrelated IO (like cache flushing, new IO generation, etc). */ #define IOCB_DIO_CALLER_COMP (1 << 22) +/* kiocb is a read or write operation submitted by fs/aio.c. */ +#define IOCB_AIO_RW (1 << 23) /* for use in trace events */ #define TRACE_IOCB_STRINGS \

1 year, 8 months

2
1
0 0

FAILED: patch "[PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x b820de741ae48ccf50dd95e297889c286ff4f760 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024022651-shrimp-freezing-6b17@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio") 9cf3516c29e6 ("fs: add IOCB flags related to passing back dio completions") f6c73a11133e ("fs.h: Add TRACE_IOCB_STRINGS for use in trace points") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b820de741ae48ccf50dd95e297889c286ff4f760 Mon Sep 17 00:00:00 2001 From: Bart Van Assche <bvanassche(a)acm.org> Date: Thu, 15 Feb 2024 12:47:38 -0800 Subject: [PATCH] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe(a)kernel.dk> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Avi Kivity <avi(a)scylladb.com> Cc: Sandeep Dhavale <dhavale(a)google.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet(a)linux.dev> Cc: stable(a)vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche(a)acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner(a)kernel.org> diff --git a/fs/aio.c b/fs/aio.c index bb2ff48991f3..da18dbcfcb22 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -593,6 +593,13 @@ void kiocb_set_cancel_fn(struct kiocb *iocb, kiocb_cancel_fn *cancel) struct kioctx *ctx = req->ki_ctx; unsigned long flags; + /* + * kiocb didn't come from aio or is neither a read nor a write, hence + * ignore it. + */ + if (!(iocb->ki_flags & IOCB_AIO_RW)) + return; + if (WARN_ON_ONCE(!list_empty(&req->ki_list))) return; @@ -1509,7 +1516,7 @@ static int aio_prep_rw(struct kiocb *req, const struct iocb *iocb) req->ki_complete = aio_complete_rw; req->private = NULL; req->ki_pos = iocb->aio_offset; - req->ki_flags = req->ki_filp->f_iocb_flags; + req->ki_flags = req->ki_filp->f_iocb_flags | IOCB_AIO_RW; if (iocb->aio_flags & IOCB_FLAG_RESFD) req->ki_flags |= IOCB_EVENTFD; if (iocb->aio_flags & IOCB_FLAG_IOPRIO) { diff --git a/include/linux/fs.h b/include/linux/fs.h index ed5966a70495..c2dcc98cb4c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -352,6 +352,8 @@ enum rw_hint { * unrelated IO (like cache flushing, new IO generation, etc). */ #define IOCB_DIO_CALLER_COMP (1 << 22) +/* kiocb is a read or write operation submitted by fs/aio.c. */ +#define IOCB_AIO_RW (1 << 23) /* for use in trace events */ #define TRACE_IOCB_STRINGS \

1 year, 8 months

2
1
0 0

[PATCH 6.7.y] selftests: mptcp: add mptcp_lib_get_counter

by Matthieu Baerts (NGI0)

From: Geliang Tang <geliang.tang(a)suse.com> To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. The helper get_counter() in mptcp_join.sh and get_mib_counter() in mptcp_connect.sh have the same functionality, export get_counter() into mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new helper instead of get_counter() and get_mib_counter(). Use this helper in test_prio() in userspace_pm.sh too instead of open-coding. Reviewed-by: Matthieu Baerts <matttbe(a)kernel.org> Signed-off-by: Geliang Tang <geliang.tang(a)suse.com> Signed-off-by: Mat Martineau <martineau(a)kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Stable-dep-of: acaef88f2624 ("selftests: mptcp: diag: check CURRESTAB counters") (cherry picked from commit 61c131f5d4d2b79904af2fdcb2839a9db8e7c55c) Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Notes: - this patch is needed for "selftests: mptcp: diag: check CURRESTAB counters" that has been added to the queue for v6.7 today, to avoid failures and this message: ./diag.sh: line 62: mptcp_lib_get_counter: command not found - conflicts in mptcp_lib.sh because the new helper expected to be placed after mptcp_lib_kill_wait() which has not been backported. --- .../selftests/net/mptcp/mptcp_connect.sh | 41 +++------ .../testing/selftests/net/mptcp/mptcp_join.sh | 88 ++++++++----------- .../testing/selftests/net/mptcp/mptcp_lib.sh | 16 ++++ .../selftests/net/mptcp/userspace_pm.sh | 14 +-- 4 files changed, 73 insertions(+), 86 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh index b1fc8afd072d..10cd322e05c4 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -341,21 +341,6 @@ do_ping() return 0 } -# $1: ns, $2: MIB counter -get_mib_counter() -{ - local listener_ns="${1}" - local mib="${2}" - - # strip the header - ip netns exec "${listener_ns}" \ - nstat -z -a "${mib}" | \ - tail -n+2 | \ - while read a count c rest; do - echo $count - done -} - # $1: ns, $2: port wait_local_port_listen() { @@ -441,12 +426,12 @@ do_transfer() nstat -n fi - local stat_synrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") - local stat_ackrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") - local stat_cookietx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent") - local stat_cookierx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv") - local stat_csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr") - local stat_csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr") + local stat_synrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") + local stat_ackrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") + local stat_cookietx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent") + local stat_cookierx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv") + local stat_csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr") + local stat_csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr") timeout ${timeout_test} \ ip netns exec ${listener_ns} \ @@ -509,11 +494,11 @@ do_transfer() check_transfer $cin $sout "file received by server" rets=$? - local stat_synrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") - local stat_ackrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") - local stat_cookietx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent") - local stat_cookierx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv") - local stat_ooo_now=$(get_mib_counter "${listener_ns}" "TcpExtTCPOFOQueue") + local stat_synrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") + local stat_ackrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") + local stat_cookietx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent") + local stat_cookierx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv") + local stat_ooo_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtTCPOFOQueue") expect_synrx=$((stat_synrx_last_l)) expect_ackrx=$((stat_ackrx_last_l)) @@ -542,8 +527,8 @@ do_transfer() fi if $checksum; then - local csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr") - local csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr") + local csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr") + local csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr") local csum_err_s_nr=$((csum_err_s - stat_csum_err_s)) if [ $csum_err_s_nr -gt 0 ]; then diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2f28d594b2c5..be10b971e912 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -611,25 +611,9 @@ wait_local_port_listen() done } -# $1: ns ; $2: counter -get_counter() -{ - local ns="${1}" - local counter="${2}" - local count - - count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}') - if [ -z "${count}" ]; then - mptcp_lib_fail_if_expected_feature "${counter} counter" - return 1 - fi - - echo "${count}" -} - rm_addr_count() { - get_counter "${1}" "MPTcpExtRmAddr" + mptcp_lib_get_counter "${1}" "MPTcpExtRmAddr" } # $1: ns, $2: old rm_addr counter in $ns @@ -649,7 +633,7 @@ wait_rm_addr() rm_sf_count() { - get_counter "${1}" "MPTcpExtRmSubflow" + mptcp_lib_get_counter "${1}" "MPTcpExtRmSubflow" } # $1: ns, $2: old rm_sf counter in $ns @@ -672,11 +656,11 @@ wait_mpj() local ns="${1}" local cnt old_cnt - old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx") + old_cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx") local i for i in $(seq 10); do - cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx") + cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx") [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done @@ -1271,7 +1255,7 @@ chk_csum_nr() fi print_check "sum" - count=$(get_counter ${ns1} "MPTcpExtDataCsumErr") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns1" ]; then extra_msg="$extra_msg ns1=$count" fi @@ -1284,7 +1268,7 @@ chk_csum_nr() print_ok fi print_check "csum" - count=$(get_counter ${ns2} "MPTcpExtDataCsumErr") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns2" ]; then extra_msg="$extra_msg ns2=$count" fi @@ -1328,7 +1312,7 @@ chk_fail_nr() fi print_check "ftx" - count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx") if [ "$count" != "$fail_tx" ]; then extra_msg="$extra_msg,tx=$count" fi @@ -1342,7 +1326,7 @@ chk_fail_nr() fi print_check "failrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx") if [ "$count" != "$fail_rx" ]; then extra_msg="$extra_msg,rx=$count" fi @@ -1375,7 +1359,7 @@ chk_fclose_nr() fi print_check "ctx" - count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_tx" ]; then @@ -1386,7 +1370,7 @@ chk_fclose_nr() fi print_check "fclzrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_rx" ]; then @@ -1416,7 +1400,7 @@ chk_rst_nr() fi print_check "rtx" - count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPRstTx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any @@ -1428,7 +1412,7 @@ chk_rst_nr() fi print_check "rstrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPRstRx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any @@ -1449,7 +1433,7 @@ chk_infi_nr() local count print_check "itx" - count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtInfiniteMapTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_tx" ]; then @@ -1459,7 +1443,7 @@ chk_infi_nr() fi print_check "infirx" - count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtInfiniteMapRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_rx" ]; then @@ -1488,7 +1472,7 @@ chk_join_nr() fi print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1499,7 +1483,7 @@ chk_join_nr() print_check "synack" with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies) - count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1516,7 +1500,7 @@ chk_join_nr() fi print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1549,8 +1533,8 @@ chk_stale_nr() print_check "stale" - stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale") - recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover") + stale_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowStale") + recover_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowRecover") if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then print_skip elif [ $stale_nr -lt $stale_min ] || @@ -1587,7 +1571,7 @@ chk_add_nr() timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) print_check "add" - count=$(get_counter ${ns2} "MPTcpExtAddAddr") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1599,7 +1583,7 @@ chk_add_nr() fi print_check "echo" - count=$(get_counter ${ns1} "MPTcpExtEchoAdd") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_nr" ]; then @@ -1610,7 +1594,7 @@ chk_add_nr() if [ $port_nr -gt 0 ]; then print_check "pt" - count=$(get_counter ${ns2} "MPTcpExtPortAdd") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$port_nr" ]; then @@ -1620,7 +1604,7 @@ chk_add_nr() fi print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1631,7 +1615,7 @@ chk_add_nr() fi print_check "synack" - count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1642,7 +1626,7 @@ chk_add_nr() fi print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1653,7 +1637,7 @@ chk_add_nr() fi print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_syn_nr" ]; then @@ -1664,7 +1648,7 @@ chk_add_nr() fi print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_ack_nr" ]; then @@ -1686,7 +1670,7 @@ chk_add_tx_nr() timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) print_check "add TX" - count=$(get_counter ${ns1} "MPTcpExtAddAddrTx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtAddAddrTx") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1698,7 +1682,7 @@ chk_add_tx_nr() fi print_check "echo TX" - count=$(get_counter ${ns2} "MPTcpExtEchoAddTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtEchoAddTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_tx_nr" ]; then @@ -1736,7 +1720,7 @@ chk_rm_nr() fi print_check "rm" - count=$(get_counter ${addr_ns} "MPTcpExtRmAddr") + count=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmAddr") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_nr" ]; then @@ -1746,13 +1730,13 @@ chk_rm_nr() fi print_check "rmsf" - count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow") + count=$(mptcp_lib_get_counter ${subflow_ns} "MPTcpExtRmSubflow") if [ -z "$count" ]; then print_skip elif [ -n "$simult" ]; then local cnt suffix - cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow") + cnt=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmSubflow") # in case of simult flush, the subflow removal count on each side is # unreliable @@ -1781,7 +1765,7 @@ chk_rm_tx_nr() local rm_addr_tx_nr=$1 print_check "rm TX" - count=$(get_counter ${ns2} "MPTcpExtRmAddrTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtRmAddrTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_tx_nr" ]; then @@ -1798,7 +1782,7 @@ chk_prio_nr() local count print_check "ptx" - count=$(get_counter ${ns1} "MPTcpExtMPPrioTx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_tx" ]; then @@ -1808,7 +1792,7 @@ chk_prio_nr() fi print_check "prx" - count=$(get_counter ${ns1} "MPTcpExtMPPrioRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_rx" ]; then @@ -1908,7 +1892,7 @@ wait_attempt_fail() while [ $time -lt $timeout_ms ]; do local cnt - cnt=$(get_counter ${ns} "TcpAttemptFails") + cnt=$(mptcp_lib_get_counter ${ns} "TcpAttemptFails") [ "$cnt" = 1 ] && return 1 time=$((time + 100)) diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index 4cd4297ca86d..2b10f200de40 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -216,3 +216,19 @@ mptcp_lib_kill_wait() { kill "${1}" > /dev/null 2>&1 wait "${1}" 2>/dev/null } + +# $1: ns, $2: MIB counter +mptcp_lib_get_counter() { + local ns="${1}" + local counter="${2}" + local count + + count=$(ip netns exec "${ns}" nstat -asz "${counter}" | + awk 'NR==1 {next} {print $2}') + if [ -z "${count}" ]; then + mptcp_lib_fail_if_expected_feature "${counter} counter" + return 1 + fi + + echo "${count}" +} diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh index 0e573c6c393a..0e748068ee95 100755 --- a/tools/testing/selftests/net/mptcp/userspace_pm.sh +++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh @@ -887,9 +887,10 @@ test_prio() # Check TX print_test "MP_PRIO TX" - count=$(ip netns exec "$ns2" nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count != 1 ]; then + count=$(mptcp_lib_get_counter "$ns2" "MPTcpExtMPPrioTx") + if [ -z "$count" ]; then + test_skip + elif [ $count != 1 ]; then test_fail "Count != 1: ${count}" else test_pass @@ -897,9 +898,10 @@ test_prio() # Check RX print_test "MP_PRIO RX" - count=$(ip netns exec "$ns1" nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count != 1 ]; then + count=$(mptcp_lib_get_counter "$ns1" "MPTcpExtMPPrioRx") + if [ -z "$count" ]; then + test_skip + elif [ $count != 1 ]; then test_fail "Count != 1: ${count}" else test_pass -- 2.43.0

1 year, 8 months

1
0
0 0

FAILED: patch "[PATCH] selftests: mptcp: join: stop transfer when check is done" failed to apply to 6.7-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.7-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.7.y git checkout FETCH_HEAD git cherry-pick -x 04b57c9e096a9479fe0ad31e3956e336fa589cb2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021925-saloon-pursuit-2736@gregkh' --subject-prefix 'PATCH 6.7.y' HEAD^.. Possible dependencies: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)") b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 04b57c9e096a9479fe0ad31e3956e336fa589cb2 Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" <matttbe(a)kernel.org> Date: Wed, 31 Jan 2024 22:49:54 +0100 Subject: [PATCH] selftests: mptcp: join: stop transfer when check is done (part 2) Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments. While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'. Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: stable(a)vger.kernel.org Reviewed-and-tested-by: Geliang Tang <geliang(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 85bcc95f4ede..c07386e21e0a 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -643,13 +643,6 @@ kill_events_pids() mptcp_lib_kill_wait $evts_ns2_pid } -kill_tests_wait() -{ - #shellcheck disable=SC2046 - kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1) - wait -} - pm_nl_set_limits() { local ns=$1 @@ -3494,7 +3487,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 2 2 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm remove initial subflow @@ -3518,7 +3511,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi # userspace pm send RM_ADDR for ID 0 @@ -3544,7 +3537,7 @@ userspace_tests() chk_mptcp_info subflows 1 subflows 1 chk_subflows_total 1 1 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi } @@ -3558,7 +3551,8 @@ endpoint_tests() pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal speed=slow \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! wait_mpj $ns1 pm_nl_check_endpoint "creation" \ @@ -3573,7 +3567,7 @@ endpoint_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi if reset "delete and re-add" && @@ -3582,7 +3576,8 @@ endpoint_tests() pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow test_linkfail=4 speed=20 \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! wait_mpj $ns2 chk_subflow_nr "before delete" 2 @@ -3597,7 +3592,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "after re-add" 2 chk_mptcp_info subflows 1 subflows 1 - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi }

1 year, 8 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2024