It is observed sometimes when tethering is used over NCM with Windows 11
as host, at some instances, the gadget_giveback has one byte appended at
the end of a proper NTB. When the NTB is parsed, unwrap call looks for
any leftover bytes in SKB provided by u_ether and if there are any pending
bytes, it treats them as a separate NTB and parses it. But in case the
second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that
were parsed properly in the first NTB and saved in rx_list are dropped.
Adding a few custom traces showed the following:
[002] d..1 7828.532866: dwc3_gadget_giveback: ep1out:
req 000000003868811a length 1025/16384 zsI ==> 0
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10
[002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames
In this case, the giveback is of 1025 bytes and block length is 1024.
The rest 1 byte (which is 0x00) won't be parsed resulting in drop of
all datagrams in rx_list.
Same is case with packets of size 2048:
[002] d..1 7828.557948: dwc3_gadget_giveback: ep1out:
req 0000000011dfd96e length 2049/16384 zsI ==> 0
[002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming
in from PC:
Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590)
- Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590)
--- Packet 4063861
Data(1024 bytes)
Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590)
--- Packet 4063863
Data(1 byte)
Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722)
According to Windows driver, no ZLP is needed if wBlockLength is non-zero,
because the non-zero wBlockLength has already told the function side the
size of transfer to be expected. However, there are in-market NCM devices
that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize.
To deal with such devices, it pads an extra 0 at end so the transfer is no
longer multiple of wMaxPacketSize.
Cc: <stable(a)vger.kernel.org>
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura(a)quicinc.com>
---
Link to v2:
https://lore.kernel.org/all/20240131150332.1326523-1-quic_kriskura@quicinc.…
Changes in v2:
Added check to see if the padded byte is 0x00.
Changes in v3:
Removed wMaxPacketSize check from v2.
drivers/usb/gadget/function/f_ncm.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index ca5d5f564998..e2a059cfda2c 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1338,7 +1338,15 @@ static int ncm_unwrap_ntb(struct gether *port,
"Parsed NTB with %d frames\n", dgram_counter);
to_process -= block_len;
- if (to_process != 0) {
+
+ /*
+ * Windows NCM driver avoids USB ZLPs by adding a 1-byte
+ * zero pad as needed.
+ */
+ if (to_process == 1 &&
+ (*(unsigned char *)(ntb_ptr + block_len) == 0x00)) {
+ to_process--;
+ } else if (to_process > 0) {
ntb_ptr = (unsigned char *)(ntb_ptr + block_len);
goto parse_ntb;
}
--
2.34.1
Hi Greg, Sasha,
Please cherry pick upstream commit b17ef04bf3a4 ("drm/amd/display:
Pass pwrseq inst for backlight and ABM") to stable kernel 6.6.x and
newer.
This fixes broken backlight adjustment on some AMD platforms with eDP panels.
Thanks,
Alex
From: Dmitry Antipov <dmantipov(a)yandex.ru>
[ Upstream commit 1bfc466b13cf6652ba227c282c27a30ffede69a5 ]
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
kernel/watch_queue.c: In function 'watch_queue_set_size':
kernel/watch_queue.c:273:32: warning: 'kcalloc' sizes specified with 'sizeof'
in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
273 | pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
| ^~~~~~
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov(a)yandex.ru>
Link: https://lore.kernel.org/r/20231221090139.12579-1-dmantipov@yandex.ru
Signed-off-by: Christian Brauner <brauner(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
kernel/watch_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/watch_queue.c b/kernel/watch_queue.c
index ae31bf8d2feb..bf86e1d71cd3 100644
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -275,7 +275,7 @@ long watch_queue_set_size(struct pipe_inode_info *pipe, unsigned int nr_notes)
goto error;
ret = -ENOMEM;
- pages = kcalloc(sizeof(struct page *), nr_pages, GFP_KERNEL);
+ pages = kcalloc(nr_pages, sizeof(struct page *), GFP_KERNEL);
if (!pages)
goto error;
--
2.43.0
Disabling HPD polling from i915_hpd_poll_init_work() involves probing
all display connectors explicitly to account for lost hotplug
interrupts. On some platforms (mostly pre-ICL) with HDMI connectors the
I2C EDID bit-banging using udelay() triggers in turn the
workqueue: i915_hpd_poll_init_work [i915] hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND
warning.
Fix the above by scheduling i915_hpd_poll_init_work() on a WQ_UNBOUND
workqueue. It's ok to use a system WQ, since i915_hpd_poll_init_work()
is properly flushed in intel_hpd_cancel_work().
The connector probing from drm_mode_config::output_poll_work resulting
in the same warning is fixed by the next patch.
Cc: Tejun Heo <tj(a)kernel.org>
Cc: Heiner Kallweit <hkallweit1(a)gmail.com>
CC: stable(a)vger.kernel.org # 6.5
Suggested-by: Tejun Heo <tj(a)kernel.org>
Suggested-by: Heiner Kallweit <hkallweit1(a)gmail.com>
Reported-by: Heiner Kallweit <hkallweit1(a)gmail.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9245
Link: https://lore.kernel.org/all/f7e21caa-e98d-e5b5-932a-fe12d27fde9b@gmail.com
Signed-off-by: Imre Deak <imre.deak(a)intel.com>
---
drivers/gpu/drm/i915/display/intel_hotplug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
index e8562f6f8bb44..accc2fec562a0 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
@@ -774,7 +774,7 @@ void intel_hpd_poll_enable(struct drm_i915_private *dev_priv)
* As well, there's no issue if we race here since we always reschedule
* this worker anyway
*/
- queue_work(dev_priv->unordered_wq,
+ queue_work(system_unbound_wq,
&dev_priv->display.hotplug.poll_init_work);
}
@@ -803,7 +803,7 @@ void intel_hpd_poll_disable(struct drm_i915_private *dev_priv)
return;
WRITE_ONCE(dev_priv->display.hotplug.poll_enabled, false);
- queue_work(dev_priv->unordered_wq,
+ queue_work(system_unbound_wq,
&dev_priv->display.hotplug.poll_init_work);
}
--
2.37.2
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.
These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.
Cc: stable(a)vger.kernel.org
Cc: Marc Rossi <Marc.Rossi(a)amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz(a)amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/uploads/a832dd515b571ee171b3e3b566e9… [1]
Link: https://gitlab.freedesktop.org/drm/amd/uploads/8f13ff3b00963c833e23e68aa811… [2]
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2645
Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com>
---
---
drivers/gpu/drm/amd/display/modules/power/power_helpers.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
index e304e8435fb8..477289846a0a 100644
--- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
+++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c
@@ -841,6 +841,8 @@ bool is_psr_su_specific_panel(struct dc_link *link)
isPSRSUSupported = false;
else if (dpcd_caps->sink_dev_id_str[1] == 0x08 && dpcd_caps->sink_dev_id_str[0] == 0x03)
isPSRSUSupported = false;
+ else if (dpcd_caps->sink_dev_id_str[1] == 0x08 && dpcd_caps->sink_dev_id_str[0] == 0x01)
+ isPSRSUSupported = false;
else if (dpcd_caps->psr_info.force_psrsu_cap == 0x1)
isPSRSUSupported = true;
}
--
2.34.1
img_info->mhi_buf should be freed on error path in mhi_alloc_bhie_table().
This error case is rare but still needs to be fixed.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations")
Cc: stable(a)vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru>
---
v2: add missing Cc: stable, as Greg Kroah-Hartman's bot reported
drivers/bus/mhi/host/boot.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
index edc0ec5a0933..738dcd11b66f 100644
--- a/drivers/bus/mhi/host/boot.c
+++ b/drivers/bus/mhi/host/boot.c
@@ -357,6 +357,7 @@ int mhi_alloc_bhie_table(struct mhi_controller *mhi_cntrl,
for (--i, --mhi_buf; i >= 0; i--, mhi_buf--)
dma_free_coherent(mhi_cntrl->cntrl_dev, mhi_buf->len,
mhi_buf->buf, mhi_buf->dma_addr);
+ kfree(img_info->mhi_buf);
error_alloc_mhi_buf:
kfree(img_info);
--
2.39.2
This reverts commit 2e42b7f817acd6e8d78226445eb6fe44fe79c12a.
If the GC victim section has a pinned block when fallocate() trigger
FG_GC, the section is not able to be recycled. And this will return
-EAGAIN cause fallocate() failed, even though there are much spare space
as user see. As the GC policy prone to chose the same victim,
fallocate() may not successed at a long period.
This scenario has been found during Android OTA.
Link: https://lore.kernel.org/linux-f2fs-devel/20231030094024.263707-1-bo.wu@vivo…
CC: stable(a)vger.kernel.org
Signed-off-by: Wu Bo <bo.wu(a)vivo.com>
---
fs/f2fs/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index b58ab1157b7e..19915faccee9 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1725,7 +1725,7 @@ static int f2fs_expand_inode_data(struct inode *inode, loff_t offset,
f2fs_down_write(&sbi->gc_lock);
stat_inc_gc_call_count(sbi, FOREGROUND);
err = f2fs_gc(sbi, &gc_control);
- if (err && err != -ENODATA)
+ if (err && err != -ENODATA && err != -EAGAIN)
goto out_err;
}
--
2.25.1