December 2024 - Linux-stable-mirror

[PATCH v2 1/1] tty: serial: 8250: Fix another runtime PM usage counter underflow

by Ilpo Järvinen

The commit f9b11229b79c ("serial: 8250: Fix PM usage_count for console handover") fixed one runtime PM usage counter balance problem that occurs because .dev is not set during univ8250 setup preventing call to pm_runtime_get_sync(). Later, univ8250_console_exit() will trigger the runtime PM usage counter underflow as .dev is already set at that time. Call pm_runtime_get_sync() to balance the RPM usage counter also in serial8250_register_8250_port() before trying to add the port. Reported-by: Borislav Petkov (AMD) <bp(a)alien8.de> Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: <stable(a)vger.kernel.org> Tested-by: Borislav Petkov (AMD) <bp(a)alien8.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> --- v2: - Added tags drivers/tty/serial/8250/8250_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 5f9f06911795..68baf75bdadc 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -812,6 +812,9 @@ int serial8250_register_8250_port(const struct uart_8250_port *up) uart->dl_write = up->dl_write; if (uart->port.type != PORT_8250_CIR) { + if (uart_console_registered(&uart->port)) + pm_runtime_get_sync(uart->port.dev); + if (serial8250_isa_config != NULL) serial8250_isa_config(0, &uart->port, &uart->capabilities); -- 2.39.5

9 months, 1 week

1
0
0 0

Linux 6.12.4

by Greg Kroah-Hartman

I'm announcing the release of the 6.12.4 kernel. All users of the 6.12 kernel series must upgrade. The updated 6.12.y git tree can be found at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-6.12.y and can be browsed at the normal kernel.org git web browser: https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary thanks, greg k-h ------------ Documentation/devicetree/bindings/net/fsl,fec.yaml | 7 Makefile | 2 arch/arm/kernel/entry-armv.S | 8 arch/arm/mm/ioremap.c | 35 ++- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 3 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 2 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi | 6 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 arch/powerpc/Kconfig | 4 arch/powerpc/Makefile | 13 - arch/powerpc/kernel/vdso/Makefile | 8 arch/s390/kernel/entry.S | 4 arch/s390/kernel/kprobes.c | 6 arch/s390/kernel/stacktrace.c | 2 drivers/android/binder.c | 64 ++++-- drivers/base/core.c | 55 ++--- drivers/block/zram/zram_drv.c | 7 drivers/clk/qcom/gcc-qcs404.c | 1 drivers/cpufreq/scmi-cpufreq.c | 4 drivers/firmware/efi/libstub/efi-stub.c | 2 drivers/gpu/drm/Kconfig | 2 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 6 drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c | 9 drivers/gpu/drm/amd/amdkfd/kfd_kernel_queue.c | 2 drivers/gpu/drm/amd/display/dc/core/dc.c | 3 drivers/gpu/drm/amd/display/dc/dccg/dcn35/dcn35_dccg.c | 15 - drivers/gpu/drm/amd/display/dc/dml2/dml2_dc_resource_mgmt.c | 23 ++ drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_offset.h | 2 drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_sh_mask.h | 13 + drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 8 drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h | 2 drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c | 6 drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 2 drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c | 2 drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 33 ++- drivers/gpu/drm/bridge/ite-it6505.c | 8 drivers/gpu/drm/drm_atomic_helper.c | 2 drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 3 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c | 1 drivers/gpu/drm/radeon/radeon_connectors.c | 10 drivers/gpu/drm/sti/sti_cursor.c | 3 drivers/gpu/drm/sti/sti_gdp.c | 3 drivers/gpu/drm/sti/sti_hqvdp.c | 3 drivers/gpu/drm/xe/xe_guc_submit.c | 17 + drivers/gpu/drm/xe/xe_migrate.c | 6 drivers/gpu/drm/xlnx/zynqmp_kms.c | 4 drivers/i3c/master.c | 2 drivers/i3c/master/svc-i3c-master.c | 39 ++- drivers/iio/accel/kionix-kx022a.c | 2 drivers/iio/adc/ad7780.c | 2 drivers/iio/adc/ad7923.c | 4 drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 4 drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 2 drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 3 drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 drivers/iio/industrialio-gts-helper.c | 2 drivers/iio/inkern.c | 2 drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c | 2 drivers/iommu/arm/arm-smmu/arm-smmu.c | 11 + drivers/iommu/io-pgtable-arm.c | 18 + drivers/leds/flash/leds-mt6360.c | 3 drivers/leds/leds-lp55xx-common.c | 3 drivers/md/dm-thin.c | 1 drivers/md/md-bitmap.c | 1 drivers/md/persistent-data/dm-space-map-common.c | 2 drivers/md/raid5.c | 4 drivers/media/dvb-frontends/ts2020.c | 8 drivers/media/i2c/dw9768.c | 10 drivers/media/i2c/ov08x40.c | 33 ++- drivers/media/i2c/tc358743.c | 4 drivers/media/platform/allegro-dvt/allegro-core.c | 4 drivers/media/platform/amphion/vpu_drv.c | 2 drivers/media/platform/amphion/vpu_v4l2.c | 2 drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c | 10 drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 11 - drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c | 4 drivers/media/platform/qcom/camss/camss.c | 19 - drivers/media/platform/qcom/venus/core.c | 2 drivers/media/platform/rockchip/rga/rga.c | 2 drivers/media/platform/samsung/exynos4-is/media-dev.h | 5 drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c | 3 drivers/media/usb/gspca/ov534.c | 2 drivers/media/usb/uvc/uvc_driver.c | 102 +++++++--- drivers/mtd/nand/spi/winbond.c | 16 - drivers/net/ethernet/freescale/fec_ptp.c | 11 - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 drivers/net/netkit.c | 68 +++++- drivers/net/phy/dp83869.c | 20 + drivers/nvmem/core.c | 2 drivers/pci/controller/dwc/pci-imx6.c | 57 ++++- drivers/pci/controller/dwc/pci-keystone.c | 12 + drivers/pci/controller/dwc/pcie-designware-ep.c | 2 drivers/pci/controller/dwc/pcie-qcom.c | 2 drivers/pci/controller/pcie-rockchip-ep.c | 16 + drivers/pci/controller/pcie-rockchip.h | 4 drivers/pci/endpoint/pci-epc-core.c | 11 - drivers/pci/of_property.c | 2 drivers/remoteproc/qcom_q6v5_pas.c | 2 drivers/spmi/spmi-pmic-arb.c | 3 drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 2 drivers/ufs/host/ufs-exynos.c | 23 +- drivers/vfio/pci/qat/main.c | 2 fs/btrfs/btrfs_inode.h | 12 - fs/btrfs/ctree.c | 6 fs/btrfs/extent-tree.c | 2 fs/btrfs/inode.c | 94 ++++----- fs/btrfs/ioctl.c | 32 +++ fs/btrfs/ref-verify.c | 1 fs/btrfs/send.c | 2 fs/ceph/mds_client.c | 7 fs/ceph/super.c | 10 fs/f2fs/segment.c | 16 - fs/f2fs/super.c | 12 + fs/nfsd/export.c | 5 fs/nfsd/nfs4state.c | 19 + fs/overlayfs/inode.c | 7 fs/overlayfs/util.c | 3 fs/proc/kcore.c | 1 fs/quota/dquot.c | 2 fs/xfs/libxfs/xfs_sb.c | 7 include/drm/drm_panic.h | 14 + include/linux/kasan.h | 12 - include/linux/util_macros.h | 56 +++-- include/uapi/linux/if_link.h | 15 + kernel/signal.c | 9 kernel/trace/ftrace.c | 7 lib/kunit/debugfs.c | 5 lib/kunit/kunit-test.c | 2 lib/maple_tree.c | 13 + mm/damon/tests/vaddr-kunit.h | 1 mm/damon/vaddr.c | 4 mm/kasan/shadow.c | 14 - mm/slab.h | 5 mm/slab_common.c | 2 mm/slub.c | 9 mm/vmalloc.c | 34 ++- mm/vmstat.c | 1 tools/perf/pmu-events/empty-pmu-events.c | 12 - tools/perf/pmu-events/jevents.py | 12 - 142 files changed, 1054 insertions(+), 431 deletions(-) Adrian Huang (1): mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation Alex Deucher (1): Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable" Alexander Shiyan (1): media: i2c: tc358743: Fix crash in the probe error path when using polling Alexandru Ardelean (1): util_macros.h: fix/rework find_closest() macros Andrea della Porta (1): PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes Ard Biesheuvel (1): efi/libstub: Free correct pointer on failure Ashutosh Dixit (1): Revert "drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs" Balaji Pothunoori (1): remoteproc: qcom_q6v5_pas: disable auto boot for wpss Benjamin Gaignard (1): media: verisilicon: av1: Fix reference video buffer pointer assignment Bryan O'Donoghue (1): media: ov08x40: Fix burst write sequence Carlos Llamas (8): binder: fix node UAF in binder_add_freeze_work() binder: fix OOB in binder_add_freeze_work() binder: fix freeze UAF in binder_release_work() binder: fix BINDER_WORK_FROZEN_BINDER debug logs binder: fix BINDER_WORK_CLEAR_FREEZE_NOTIFICATION debug logs binder: allow freeze notification for dead nodes binder: fix memleak of proc->delivered_freeze binder: add delivered_freeze to debugfs output Chao Yu (1): f2fs: fix to drop all discards after creating snapshot on lvm device Chen-Yu Tsai (3): arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity drm/bridge: it6505: Fix inverted reset polarity Choong Yong Liang (1): net: stmmac: set initial EEE policy configuration Damien Le Moal (1): PCI: rockchip-ep: Fix address translation unit programming Daniel Borkmann (1): netkit: Add option for scrubbing skb meta data David Sterba (1): btrfs: drop unused parameter file_offset from btrfs_encoded_read_regular_fill_pages() Dragan Simic (1): arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer Filipe Manana (2): btrfs: don't loop for nowait writes when checking for cross references btrfs: ref-verify: fix use-after-free after invalid ref action Francesco Dolcini (6): arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay dt-bindings: net: fec: add pps channel property net: fec: refactor PPS channel configuration net: fec: make PPS channel configurable Frank Li (3): i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() i3c: master: svc: fix possible assignment of the same address to two devices i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter Frederic Weisbecker (1): posix-timers: Target group sigqueue to current task only if not exiting Gabor Juhos (1): clk: qcom: gcc-qcs404: fix initial rate of GPLL3 Gaosheng Cui (1): media: platform: allegro-dvt: Fix possible memory leak in allocate_buffers_internal() Geert Uytterhoeven (1): slab: Fix too strict alignment check in create_cache() Giovanni Cabiddu (1): vfio/qat: fix overflow check in qat_vf_resume_write() Greg Kroah-Hartman (1): Linux 6.12.4 Guoqing Jiang (1): media: mtk-jpeg: Fix null-ptr-deref during unload module Heiko Carstens (1): s390/stacktrace: Use break instead of return statement Hugo Villeneuve (1): drm: panel: jd9365da-h3: Remove unused num_init_cmds structure member Javier Carrasco (3): spmi: pmic-arb: fix return path in for_each_available_child_of_node() leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error paths drm/mediatek: Fix child node refcount handling in early exit Jean-Baptiste Maneyrol (1): iio: invensense: fix multiple odr switch when FIFO is off Jinjie Ruan (6): media: i2c: dw9768: Fix pm_runtime_set_suspended() with runtime pm enabled media: amphion: Fix pm_runtime_set_suspended() with runtime pm enabled media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate() kunit: string-stream: Fix a UAF bug in kunit_init_suite() i3c: master: svc: Fix pm_runtime_set_suspended() with runtime pm enabled Jiri Olsa (1): fs/proc/kcore.c: Clear ret value in read_kcore_iter after successful iov_iter_zero Joe Hattori (1): media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available Johannes Thumshirn (1): btrfs: fix use-after-free in btrfs_encoded_read_endio() John Keeping (1): media: platform: rga: fix 32-bit DMA limitation Jonathan Cavitt (1): drm/xe/xe_guc_ads: save/restore OA registers and allowlist regs Joshua Aberback (1): drm/amd/display: Fix handling of plane refcount Kenneth Feng (3): drm/amdgpu/pm: add gen5 display to the user on smu v14.0.2/3 drm/amd/pm: skip setting the power source on smu v14.0.2/3 drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3 Kishon Vijay Abraham I (2): PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible PCI: keystone: Add link up check to ks_pcie_other_map_bus() Li Zetao (1): media: ts2020: fix null-ptr-deref in ts2020_probe() Lijo Lazar (2): drm/amdkfd: Use the correct wptr size drm/amd/pm: Remove arcturus min power limit Linus Walleij (3): ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow ARM: 9430/1: entry: Do a dummy read from VMAP shadow ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire() Lizhi Xu (1): btrfs: add a sanity check for btrfs root in btrfs_search_slot() Long Li (1): xfs: remove unknown compat feature check in superblock write validation Lucas Stach (1): drm/etnaviv: flush shader L1 cache after user commandstream Lyude Paul (1): drm/panic: Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n Ma Ke (3): drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check drm/sti: avoid potential dereference of error pointers Marek Vasut (1): nvmem: core: Check read_only flag for force_ro in bin_attr_nvmem_write() Mario Limonciello (2): drm/amd: Add some missing straps from NBIO 7.11.0 drm/amd: Fix initialization mistake for NBIO 7.11 devices Mark Harmstone (2): btrfs: change btrfs_encoded_read() so that reading of extent is done by caller btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages() Masami Hiramatsu (Google) (1): tracing: Fix function timing profiler to initialize hashtable Matthew Auld (3): drm/xe/migrate: fix pat index usage drm/xe/migrate: use XE_BO_FLAG_PAGETABLE drm/xe/guc_submit: fix race around suspend_pending Matti Vaittinen (1): iio: accel: kx022a: Fix raw read format Max Kellermann (2): ceph: pass cred pointer to ceph_mds_auth_match() ceph: fix cred leak in ceph_mds_check_access() MengEn Sun (1): vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event Michal Vokáč (1): leds: lp55xx: Remove redundant test for invalid channel number Ming Qian (3): media: amphion: Set video drvdata before register video device media: imx-jpeg: Set video drvdata before register video device media: imx-jpeg: Ensure power suppliers be suspended before detach them Miquel Raynal (2): mtd: spinand: winbond: Fix 512GW and 02JW OOB layout mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information Mostafa Saleh (1): iommu/io-pgtable-arm: Fix stage-2 map/unmap for concatenated tables Nathan Chancellor (3): powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang powerpc: Fix stack protector Kconfig test for clang powerpc: Adjust adding stack protector flags to KBUILD_CLAGS for clang Niklas Cassel (1): PCI: dwc: ep: Fix advertised resizable BAR size regression Nuno Sa (1): iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer Ojaswin Mujoo (1): quota: flush quota_release_work upon quota writeback Oleksandr Tymoshenko (1): ovl: properly handle large files in ovl_security_fileattr Ovidiu Bunea (1): drm/amd/display: Remove PIPE_DTO_SRC_SEL programming from set_dtbclk_dto Patrick Donnelly (1): ceph: extract entity name from device id Peter Griffin (2): scsi: ufs: exynos: Add check inside exynos_ufs_config_smu() scsi: ufs: exynos: Fix hibern8 notify callbacks Pratyush Brahma (1): iommu/arm-smmu: Defer probe of clients after smmu device bound Qiang Yu (1): PCI: qcom: Disable ASPM L0s for X1E80100 Ricardo Ribalda (1): media: uvcvideo: Stop stream during unregister Romain Gantois (1): net: phy: dp83869: fix status reporting for 1000base-x autonegotiation Saravana Kannan (1): driver core: fw_devlink: Stop trying to optimize cycle detection logic Sergey Senozhatsky (1): zram: clear IDLE flag after recompression Sibi Sankar (1): cpufreq: scmi: Fix cleanup path when boost enablement fails Srinivas Pandruvada (1): thermal: int3400: Fix reading of current_uuid for active policy Ssuhung Yeh (1): dm: Fix typo in error message Stefan Eichenberger (1): PCI: imx6: Fix suspend/resume support on i.MX6QDL Steffen Dirkwinkel (1): drm: xlnx: zynqmp_dpsub: fix hotplug detection Thadeu Lima de Souza Cascardo (1): media: uvcvideo: Require entities to have a non-zero unique ID Thomas Zimmermann (1): drm/fbdev-dma: Select FB_DEFERRED_IO Umio Yasuno (1): drm/amd/pm: update current_socclk and current_uclk in gpu_metrics on smu v13.0.7 Vasiliy Kovalev (1): ovl: Filter invalid inodes with missing lookup function Vasily Gorbik (1): s390/entry: Mark IRQ entries to fix stack depot warnings Vitaly Prosyak (1): drm/amdgpu: fix usage slab after free Vladimir Zapolskiy (1): media: qcom: camss: fix error path on configuration of power domains Wei Yang (1): maple_tree: refine mas_store_root() on storing NULL Will Deacon (1): iommu/tegra241-cmdqv: Fix unused variable warning Xiao Ni (1): md/raid5: Wait sync io to finish before changing group cnt Xu Yang (1): perf jevents: fix breakage when do perf stat on system metric Yang Erkun (2): nfsd: make sure exp active before svc_export_show nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur Yihan Zhu (1): drm/amd/display: update pipe selection policy to check head pipe Yuan Can (2): md/md-bitmap: Add missing destroy_work_on_stack() dm thin: Add missing destroy_work_on_stack() Zheng Yejian (1): mm/damon/vaddr: fix issue in damon_va_evenly_split_region() Zichen Xie (1): kunit: Fix potential null dereference in kunit_device_driver_test() Zicheng Qu (3): ad7780: fix division by zero in ad7780_write_raw() iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() iio: gts: fix infinite loop for gain_to_scaletables() Zijun Hu (2): PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy() PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf() guoweikang (1): ftrace: Fix regression with module command in stack_trace_filter yuan.gao (1): mm/slub: Avoid list corruption when removing a slab from the full list

9 months, 1 week

5
16
0 0

[PATCH v2 1/2] drm/xe: Use non-interruptible wait when moving BO to system

by Nirmoy Das

Ensure a non-interruptible wait is used when moving a bo to XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely while a GPU job is still in progress, even if the CPU receives a signal during the operation. Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT") Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.11+ Suggested-by: Matthew Auld <matthew.auld(a)intel.com> Signed-off-by: Nirmoy Das <nirmoy.das(a)intel.com> --- drivers/gpu/drm/xe/xe_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_bo.c b/drivers/gpu/drm/xe/xe_bo.c index 73689dd7d672..b2aa368a23f8 100644 --- a/drivers/gpu/drm/xe/xe_bo.c +++ b/drivers/gpu/drm/xe/xe_bo.c @@ -733,7 +733,7 @@ static int xe_bo_move(struct ttm_buffer_object *ttm_bo, bool evict, new_mem->mem_type == XE_PL_SYSTEM) { long timeout = dma_resv_wait_timeout(ttm_bo->base.resv, DMA_RESV_USAGE_BOOKKEEP, - true, + false, MAX_SCHEDULE_TIMEOUT); if (timeout < 0) { ret = timeout; -- 2.46.0

9 months, 1 week

5
7
0 0

[PATCH v3 1/2] drm/xe: Use non-interruptible wait when moving BO to system

by Nirmoy Das

Ensure a non-interruptible wait is used when moving a bo to XE_PL_SYSTEM. This prevents dma_mappings from being removed prematurely while a GPU job is still in progress, even if the CPU receives a signal during the operation. Fixes: 75521e8b56e8 ("drm/xe: Perform dma_map when moving system buffer objects to TT") Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.11+ Suggested-by: Matthew Auld <matthew.auld(a)intel.com> Signed-off-by: Nirmoy Das <nirmoy.das(a)intel.com> Reviewed-by: Matthew Auld <matthew.auld(a)intel.com> --- drivers/gpu/drm/xe/xe_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_bo.c b/drivers/gpu/drm/xe/xe_bo.c index 283cd0294570..06931df876ab 100644 --- a/drivers/gpu/drm/xe/xe_bo.c +++ b/drivers/gpu/drm/xe/xe_bo.c @@ -733,7 +733,7 @@ static int xe_bo_move(struct ttm_buffer_object *ttm_bo, bool evict, new_mem->mem_type == XE_PL_SYSTEM) { long timeout = dma_resv_wait_timeout(ttm_bo->base.resv, DMA_RESV_USAGE_BOOKKEEP, - true, + false, MAX_SCHEDULE_TIMEOUT); if (timeout < 0) { ret = timeout; -- 2.46.0

9 months, 1 week

2
2
0 0

[PATCH AUTOSEL 6.12 01/19] s390/pci: Sort PCI functions prior to creating virtual busses

by Sasha Levin

From: Niklas Schnelle <schnelle(a)linux.ibm.com> [ Upstream commit 0467cdde8c4320bbfdb31a8cff1277b202f677fc ] Instead of relying on the observed but not architected firmware behavior that PCI functions from the same card are listed in ascending RID order in clp_list_pci() ensure this by sorting. To allow for sorting separate the initial clp_list_pci() and creation of the virtual PCI busses. Note that fundamentally in our per-PCI function hotplug design non RID order of discovery is still possible. For example when the two PFs of a two port NIC are hotplugged after initial boot and in descending RID order. In this case the virtual PCI bus would be created by the second PF using that PF's UID as domain number instead of that of the first PF. Thus the domain number would then change from the UID of the second PF to that of the first PF on reboot but there is really nothing we can do about that since changing domain numbers at runtime seems even worse. This only impacts the domain number as the RIDs are consistent and thus even with just the second PF visible it will show up in the correct position on the virtual bus. Reviewed-by: Gerd Bayer <gbayer(a)linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle(a)linux.ibm.com> Signed-off-by: Heiko Carstens <hca(a)linux.ibm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/s390/include/asm/pci.h | 5 ++- arch/s390/pci/pci.c | 69 ++++++++++++++++++++++++++++++++----- arch/s390/pci/pci_clp.c | 12 ++++--- arch/s390/pci/pci_event.c | 13 ++++--- 4 files changed, 82 insertions(+), 17 deletions(-) diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 9d920ced60475..45e87c7c122a6 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -130,6 +130,7 @@ struct zpci_dev { u16 vfn; /* virtual function number */ u16 pchid; /* physical channel ID */ u16 maxstbl; /* Maximum store block size */ + u16 rid; /* RID as supplied by firmware */ u8 pfgid; /* function group ID */ u8 pft; /* pci function type */ u8 port; @@ -210,12 +211,14 @@ extern struct airq_iv *zpci_aif_sbv; ----------------------------------------------------------------------------- */ /* Base stuff */ struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state); +int zpci_add_device(struct zpci_dev *zdev); int zpci_enable_device(struct zpci_dev *); int zpci_disable_device(struct zpci_dev *); int zpci_scan_configured_device(struct zpci_dev *zdev, u32 fh); int zpci_deconfigure_device(struct zpci_dev *zdev); void zpci_device_reserved(struct zpci_dev *zdev); bool zpci_is_device_configured(struct zpci_dev *zdev); +int zpci_scan_devices(void); int zpci_hot_reset_device(struct zpci_dev *zdev); int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64, u8 *); @@ -225,7 +228,7 @@ void zpci_update_fh(struct zpci_dev *zdev, u32 fh); /* CLP */ int clp_setup_writeback_mio(void); -int clp_scan_pci_devices(void); +int clp_scan_pci_devices(struct list_head *scan_list); int clp_query_pci_fn(struct zpci_dev *zdev); int clp_enable_fh(struct zpci_dev *zdev, u32 *fh, u8 nr_dma_as); int clp_disable_fh(struct zpci_dev *zdev, u32 *fh); diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index bd9624c20b802..b7efa96776eac 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -29,6 +29,7 @@ #include <linux/pci.h> #include <linux/printk.h> #include <linux/lockdep.h> +#include <linux/list_sort.h> #include <asm/isc.h> #include <asm/airq.h> @@ -785,7 +786,6 @@ struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state) struct zpci_dev *zdev; int rc; - zpci_dbg(1, "add fid:%x, fh:%x, c:%d\n", fid, fh, state); zdev = kzalloc(sizeof(*zdev), GFP_KERNEL); if (!zdev) return ERR_PTR(-ENOMEM); @@ -805,6 +805,19 @@ struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state) mutex_init(&zdev->fmb_lock); mutex_init(&zdev->kzdev_lock); + return zdev; + +error: + zpci_dbg(0, "crt fid:%x, rc:%d\n", fid, rc); + kfree(zdev); + return ERR_PTR(rc); +} + +int zpci_add_device(struct zpci_dev *zdev) +{ + int rc; + + zpci_dbg(1, "add fid:%x, fh:%x, c:%d\n", zdev->fid, zdev->fh, zdev->state); rc = zpci_init_iommu(zdev); if (rc) goto error; @@ -816,15 +829,13 @@ struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state) spin_lock(&zpci_list_lock); list_add_tail(&zdev->entry, &zpci_list); spin_unlock(&zpci_list_lock); - - return zdev; + return 0; error_destroy_iommu: zpci_destroy_iommu(zdev); error: - zpci_dbg(0, "add fid:%x, rc:%d\n", fid, rc); - kfree(zdev); - return ERR_PTR(rc); + zpci_dbg(0, "add fid:%x, rc:%d\n", zdev->fid, rc); + return rc; } bool zpci_is_device_configured(struct zpci_dev *zdev) @@ -1082,6 +1093,49 @@ bool zpci_is_enabled(void) return s390_pci_initialized; } +static int zpci_cmp_rid(void *priv, const struct list_head *a, + const struct list_head *b) +{ + struct zpci_dev *za = container_of(a, struct zpci_dev, entry); + struct zpci_dev *zb = container_of(b, struct zpci_dev, entry); + + /* + * PCI functions without RID available maintain original order + * between themselves but sort before those with RID. + */ + if (za->rid == zb->rid) + return za->rid_available > zb->rid_available; + /* + * PCI functions with RID sort by RID ascending. + */ + return za->rid > zb->rid; +} + +static void zpci_add_devices(struct list_head *scan_list) +{ + struct zpci_dev *zdev, *tmp; + + list_sort(NULL, scan_list, &zpci_cmp_rid); + list_for_each_entry_safe(zdev, tmp, scan_list, entry) { + list_del_init(&zdev->entry); + zpci_add_device(zdev); + } +} + +int zpci_scan_devices(void) +{ + LIST_HEAD(scan_list); + int rc; + + rc = clp_scan_pci_devices(&scan_list); + if (rc) + return rc; + + zpci_add_devices(&scan_list); + zpci_bus_scan_busses(); + return 0; +} + static int __init pci_base_init(void) { int rc; @@ -1111,10 +1165,9 @@ static int __init pci_base_init(void) if (rc) goto out_irq; - rc = clp_scan_pci_devices(); + rc = zpci_scan_devices(); if (rc) goto out_find; - zpci_bus_scan_busses(); s390_pci_initialized = 1; return 0; diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c index 6f55a59a08711..f7430086e9739 100644 --- a/arch/s390/pci/pci_clp.c +++ b/arch/s390/pci/pci_clp.c @@ -164,8 +164,10 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev, zdev->port = response->port; zdev->uid = response->uid; zdev->fmb_length = sizeof(u32) * response->fmb_len; - zdev->rid_available = response->rid_avail; zdev->is_physfn = response->is_physfn; + zdev->rid_available = response->rid_avail; + if (zdev->rid_available) + zdev->rid = response->rid; if (!s390_pci_no_rid && zdev->rid_available) zdev->devfn = response->rid & ZPCI_RID_MASK_DEVFN; @@ -407,6 +409,7 @@ static int clp_find_pci(struct clp_req_rsp_list_pci *rrb, u32 fid, static void __clp_add(struct clp_fh_list_entry *entry, void *data) { + struct list_head *scan_list = data; struct zpci_dev *zdev; if (!entry->vendor_id) @@ -417,10 +420,11 @@ static void __clp_add(struct clp_fh_list_entry *entry, void *data) zpci_zdev_put(zdev); return; } - zpci_create_device(entry->fid, entry->fh, entry->config_state); + zdev = zpci_create_device(entry->fid, entry->fh, entry->config_state); + list_add_tail(&zdev->entry, scan_list); } -int clp_scan_pci_devices(void) +int clp_scan_pci_devices(struct list_head *scan_list) { struct clp_req_rsp_list_pci *rrb; int rc; @@ -429,7 +433,7 @@ int clp_scan_pci_devices(void) if (!rrb) return -ENOMEM; - rc = clp_list_pci(rrb, NULL, __clp_add); + rc = clp_list_pci(rrb, scan_list, __clp_add); clp_free_block(rrb); return rc; diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index d4f19d33914cb..47f934f4e828e 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -340,6 +340,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) zdev = zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_CONFIGURED); if (IS_ERR(zdev)) break; + zpci_add_device(zdev); } else { /* the configuration request may be stale */ if (zdev->state != ZPCI_FN_STATE_STANDBY) @@ -349,10 +350,14 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) zpci_scan_configured_device(zdev, ccdf->fh); break; case 0x0302: /* Reserved -> Standby */ - if (!zdev) - zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_STANDBY); - else + if (!zdev) { + zdev = zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_STANDBY); + if (IS_ERR(zdev)) + break; + zpci_add_device(zdev); + } else { zpci_update_fh(zdev, ccdf->fh); + } break; case 0x0303: /* Deconfiguration requested */ if (zdev) { @@ -381,7 +386,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) break; case 0x0306: /* 0x308 or 0x302 for multiple devices */ zpci_remove_reserved_devices(); - clp_scan_pci_devices(); + zpci_scan_devices(); break; case 0x0308: /* Standby -> Reserved */ if (!zdev) -- 2.43.0

9 months, 1 week

4
24
0 0

[PATCH AUTOSEL 4.19 1/4] media: uvcvideo: Add a quirk for the Kaiweets KTI-W02 infrared camera

by Sasha Levin

From: David Given <dg(a)cowlark.com> [ Upstream commit b2ec92bb5605452d539a7aa1e42345b95acd8583 ] Adds a quirk to make the NXP Semiconductors 1fc9:009b chipset work. lsusb for the device reports: Bus 003 Device 011: ID 1fc9:009b NXP Semiconductors IR VIDEO Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 [unknown] bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1fc9 NXP Semiconductors idProduct 0x009b IR VIDEO bcdDevice 1.01 iManufacturer 1 Guide sensmart iProduct 2 IR VIDEO iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x00c2 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 3 IR Camera Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 0 VideoControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 0x0033 dwClockFrequency 6.000000MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Camera Sensor bAssocTerminal 0 iTerminal 0 wObjectiveFocalLengthMin 0 wObjectiveFocalLengthMax 0 wOcularFocalLength 0 bControlSize 3 bmControls 0x00000000 VideoControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 1 iTerminal 0 VideoControl Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 5 (PROCESSING_UNIT) Warning: Descriptor too short bUnitID 3 bSourceID 1 wMaxMultiplier 0 bControlSize 2 bmControls 0x00000000 iProcessing 0 bmVideoStandards 0x62 NTSC - 525/60 PAL - 525/60 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 VideoStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 1 (INPUT_HEADER) bNumFormats 1 wTotalLength 0x0055 bEndpointAddress 0x82 EP 2 IN bmInfo 0 bTerminalLink 2 bStillCaptureMethod 2 bTriggerSupport 0 bTriggerUsage 0 bControlSize 1 bmaControls( 0) 0 VideoStreaming Interface Descriptor: bLength 27 bDescriptorType 36 bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED) bFormatIndex 1 bNumFrameDescriptors 1 guidFormat {e436eb7b-524f-11ce-9f53-0020af0ba770} bBitsPerPixel 16 bDefaultFrameIndex 1 bAspectRatioX 0 bAspectRatioY 0 bmInterlaceFlags 0x00 Interlaced stream or variable: No Fields per frame: 2 fields Field 1 first: No Field pattern: Field 1 only bCopyProtect 0 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 240 wHeight 322 dwMinBitRate 12364800 dwMaxBitRate 30912000 dwMaxVideoFrameBufferSize 154560 dwDefaultFrameInterval 400000 bFrameIntervalType 2 dwFrameInterval( 0) 400000 dwFrameInterval( 1) 1000000 VideoStreaming Interface Descriptor: bLength 10 bDescriptorType 36 bDescriptorSubtype 3 (STILL_IMAGE_FRAME) bEndpointAddress 0x00 EP 0 OUT bNumImageSizePatterns 1 wWidth( 0) 240 wHeight( 0) 322 bNumCompressionPatterns 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 1 Device Status: 0x0001 Self Powered Signed-off-by: David Given <dg(a)cowlark.com> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda(a)chromium.org> Link: https://lore.kernel.org/r/20240918180540.10830-2-dg@cowlark.com Signed-off-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/media/usb/uvc/uvc_driver.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index cbad244a307d2..473cc23ef8431 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -2402,6 +2402,8 @@ static const struct uvc_device_info uvc_quirk_force_y8 = { * The Logitech cameras listed below have their interface class set to * VENDOR_SPEC because they don't announce themselves as UVC devices, even * though they are compliant. + * + * Sort these by vendor/product ID. */ static const struct usb_device_id uvc_ids[] = { /* LogiLink Wireless Webcam */ @@ -2852,6 +2854,15 @@ static const struct usb_device_id uvc_ids[] = { .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_INFO(UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_IGNORE_SELECTOR_UNIT) }, + /* NXP Semiconductors IR VIDEO */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1fc9, + .idProduct = 0x009b, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = (kernel_ulong_t)&uvc_quirk_probe_minmax }, /* Oculus VR Positional Tracker DK2 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, -- 2.43.0

9 months, 1 week

3
6
0 0

[PATCH AUTOSEL 6.12 001/107] drm/xe/pciids: separate RPL-U and RPL-P PCI IDs

by Sasha Levin

From: Jani Nikula <jani.nikula(a)intel.com> [ Upstream commit d454902a690db47f1880f963514bbf0fc7a129a8 ] Avoid including PCI IDs for one platform to the PCI IDs of another. It's more clear to deal with them completely separately at the PCI ID macro level. Reviewed-by: Sai Teja Pottumuttu <sai.teja.pottumuttu(a)intel.com> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4868d36fbfa8c38ea2d490bca82cf… Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/gpu/drm/xe/xe_pci.c | 1 + include/drm/intel/xe_pciids.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c index 5e962e72c97ea..8563206f643e6 100644 --- a/drivers/gpu/drm/xe/xe_pci.c +++ b/drivers/gpu/drm/xe/xe_pci.c @@ -383,6 +383,7 @@ static const struct pci_device_id pciidlist[] = { XE_ADLS_IDS(INTEL_VGA_DEVICE, &adl_s_desc), XE_ADLP_IDS(INTEL_VGA_DEVICE, &adl_p_desc), XE_ADLN_IDS(INTEL_VGA_DEVICE, &adl_n_desc), + XE_RPLU_IDS(INTEL_VGA_DEVICE, &adl_p_desc), XE_RPLP_IDS(INTEL_VGA_DEVICE, &adl_p_desc), XE_RPLS_IDS(INTEL_VGA_DEVICE, &adl_s_desc), XE_DG1_IDS(INTEL_VGA_DEVICE, &dg1_desc), diff --git a/include/drm/intel/xe_pciids.h b/include/drm/intel/xe_pciids.h index 644872a35c352..7ee7524141f10 100644 --- a/include/drm/intel/xe_pciids.h +++ b/include/drm/intel/xe_pciids.h @@ -120,7 +120,6 @@ /* RPL-P */ #define XE_RPLP_IDS(MACRO__, ...) \ - XE_RPLU_IDS(MACRO__, ## __VA_ARGS__), \ MACRO__(0xA720, ## __VA_ARGS__), \ MACRO__(0xA7A0, ## __VA_ARGS__), \ MACRO__(0xA7A8, ## __VA_ARGS__), \ -- 2.43.0

9 months, 1 week

3
109
0 0

[PATCH AUTOSEL 5.4 01/28] drm: panel-orientation-quirks: Add quirk for AYA NEO 2 model

by Sasha Levin

From: Joaquín Ignacio Aramendía <samsagax(a)gmail.com> [ Upstream commit 361ebf5ef843b0aa1704c72eb26b91cf76c3c5b7 ] Add quirk orientation for AYA NEO 2. The name appears without spaces in DMI strings. That made it difficult to reuse the 2021 match. Also the display is larger in resolution. Tested by the JELOS team that has been patching their own kernel for a while now and confirmed by users in the AYA NEO and ChimeraOS discord servers. Signed-off-by: Joaquín Ignacio Aramendía <samsagax(a)gmail.com> Signed-off-by: Tobias Jakobi <tjakobi(a)math.uni-bielefeld.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Reviewed-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/2b35545b77a9fd8c9699b751ca282… Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index f1091cb87de0c..bf90a5be956fe 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -166,6 +166,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T103HAF"), }, .driver_data = (void *)&lcd800x1280_rightside_up, + }, { /* AYA NEO AYANEO 2 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYANEO"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "AYANEO 2"), + }, + .driver_data = (void *)&lcd1200x1920_rightside_up, }, { /* AYA NEO 2021 */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AYADEVICE"), -- 2.43.0

9 months, 1 week

2
29
0 0

[PATCH AUTOSEL 6.12 01/36] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU

by Sasha Levin

From: Esben Haabendal <esben(a)geanix.com> [ Upstream commit 58414a31c5713afb5449fd74a26a843d34cc62e8 ] When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU dependency could not be enabled. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/ Signed-off-by: Esben Haabendal <esben(a)geanix.com> Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca194… Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/pinctrl/freescale/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index 3b59d71890045..139bc0fb8a9db 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -20,7 +20,7 @@ config PINCTRL_IMX_SCMI config PINCTRL_IMX_SCU tristate - depends on IMX_SCU + depends on IMX_SCU || COMPILE_TEST select PINCTRL_IMX config PINCTRL_IMX1_CORE -- 2.43.0

9 months, 1 week

2
37
0 0

[PATCH AUTOSEL 6.11 01/15] usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

by Sasha Levin

From: Xu Yang <xu.yang_2(a)nxp.com> [ Upstream commit ec841b8d73cff37f8960e209017efe1eb2fb21f2 ] Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Acked-by: Peter Chen <peter.chen(a)kernel.org> Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/usb/chipidea/ci.h | 1 + drivers/usb/chipidea/ci_hdrc_imx.c | 1 + drivers/usb/chipidea/core.c | 2 ++ include/linux/usb/chipidea.h | 1 + 4 files changed, 5 insertions(+) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 2a38e1eb65466..e4b003d060c26 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -260,6 +260,7 @@ struct ci_hdrc { bool b_sess_valid_event; bool imx28_write_fix; bool has_portsc_pec_bug; + bool has_short_pkt_limit; bool supports_runtime_pm; bool in_lpm; bool wakeup_int; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index bdc04ce919f7a..b76e7c3fa2c6e 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -342,6 +342,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) struct ci_hdrc_platform_data pdata = { .name = dev_name(&pdev->dev), .capoffset = DEF_CAPOFFSET, + .flags = CI_HDRC_HAS_SHORT_PKT_LIMIT, .notify_event = ci_hdrc_imx_notify_event, }; int ret; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 835bf2428dc6e..5aa16dbfc289c 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1076,6 +1076,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) CI_HDRC_SUPPORTS_RUNTIME_PM); ci->has_portsc_pec_bug = !!(ci->platdata->flags & CI_HDRC_HAS_PORTSC_PEC_MISSED); + ci->has_short_pkt_limit = !!(ci->platdata->flags & + CI_HDRC_HAS_SHORT_PKT_LIMIT); platform_set_drvdata(pdev, ci); ret = hw_device_init(ci, base); diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 5a7f96684ea22..ebdfef124b2bc 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -65,6 +65,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_PHY_VBUS_CONTROL BIT(16) #define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17) #define CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS BIT(18) +#define CI_HDRC_HAS_SHORT_PKT_LIMIT BIT(19) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 -- 2.43.0

9 months, 1 week

3
19
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024