December 2024 - Linux-stable-mirror

[PATCH] usb: ehci-hcd: fix call balance of clocks handling routines

by Vitalii Mordan

If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe, they should not be disabled in any path. Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.") Cc: stable(a)vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk Signed-off-by: Vitalii Mordan <mordan(a)ispras.ru> --- drivers/usb/host/ehci-sh.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index d31d9506e41a..77460aac6dbd 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -119,8 +119,12 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) if (IS_ERR(priv->iclk)) priv->iclk = NULL; - clk_enable(priv->fclk); - clk_enable(priv->iclk); + ret = clk_enable(priv->fclk); + if (ret) + goto fail_request_resource; + ret = clk_enable(priv->iclk); + if (ret) + goto fail_iclk; ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { @@ -136,6 +140,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) fail_add_hcd: clk_disable(priv->iclk); +fail_iclk: clk_disable(priv->fclk); fail_request_resource: -- 2.25.1

8 months

5
5
0 0

[PATCH v5 0/8] driver core: class: Fix bug and code improvements for class APIs

by Zijun Hu

This patch series is to fix bugs and improve codes regarding various driver core device iterating APIs Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> --- Changes in v5: - Add comments back and correct tile and commit messages for patch 8/8. - Link to v4: https://lore.kernel.org/r/20241218-class_fix-v4-0-3c40f098356b@quicinc.com Changes in v4: - Squich patches 3-5 into one based on Jonathan and Fan comments. - Add one more patch - Link to v3: https://lore.kernel.org/r/20241212-class_fix-v3-0-04e20c4f0971@quicinc.com Changes in v3: - Correct commit message, add fix tag, and correct pr_crit() message for 1st patch - Add more patches regarding driver core device iterating APIs. - Link to v2: https://lore.kernel.org/r/20241112-class_fix-v2-0-73d198d0a0d5@quicinc.com Changes in v2: - Remove both fix and stable tag for patch 1/3 - drop patch 3/3 - Link to v1: https://lore.kernel.org/r/20241105-class_fix-v1-0-80866f9994a5@quicinc.com --- Zijun Hu (8): driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() blk-cgroup: Fix class @block_class's subsystem refcount leakage driver core: Move true expression out of if condition in 3 device finding APIs driver core: Rename declaration parameter name for API device_find_child() cluster driver core: Correct parameter check for API device_for_each_child_reverse_from() driver core: Correct API device_for_each_child_reverse_from() prototype driver core: Introduce device_iter_t for device iterating APIs driver core: Move two simple APIs for finding child device to header block/blk-cgroup.c | 1 + drivers/base/bus.c | 9 +++++--- drivers/base/class.c | 11 ++++++++-- drivers/base/core.c | 49 +++++++++---------------------------------- drivers/base/driver.c | 9 +++++--- drivers/cxl/core/hdm.c | 2 +- drivers/cxl/core/region.c | 2 +- include/linux/device.h | 46 +++++++++++++++++++++++++++++++--------- include/linux/device/bus.h | 7 +++++-- include/linux/device/class.h | 4 ++-- include/linux/device/driver.h | 2 +- 11 files changed, 78 insertions(+), 64 deletions(-) --- base-commit: 78d4f34e2115b517bcbfe7ec0d018bbbb6f9b0b8 change-id: 20241104-class_fix-f176bd9eba22 prerequisite-change-id: 20241201-const_dfc_done-aaec71e3bbea:v5 prerequisite-patch-id: 536aa56c0d055f644a1f71ab5c88b7cac9510162 prerequisite-patch-id: 39b0cf088c72853d9ce60c9e633ad2070a0278a8 prerequisite-patch-id: 60b22c42b67ad56a3d2a7b80a30ad588cbe740ec prerequisite-patch-id: 119a167d7248481987b5e015db0e4fdb0d6edab8 prerequisite-patch-id: 133248083f3d3c57beb16473c2a4c62b3abc5fd0 prerequisite-patch-id: 4cda541f55165650bfa69fb19cbe0524eff0cb85 prerequisite-patch-id: 2b4193c6ea6370c07e6b66de04be89fb09448f54 prerequisite-patch-id: 73c675db18330c89fd8ca4790914d1d486ce0db8 prerequisite-patch-id: 88c50fc851fd7077797fd4e63fb12966b1b601bd prerequisite-patch-id: 47b93916c1b5fb809d7c99aeaa05c729b1af01c5 prerequisite-patch-id: 5b58c0292ea5a5e37b08e2c8287d94df958128db prerequisite-patch-id: 52ffb42b5aae69cae708332e0ddc7016139999f1 Best regards, -- Zijun Hu <quic_zijuhu(a)quicinc.com>

8 months

1
1
0 0

[PATCH 0/2] dmaengine: mv_xor: fix child node handling and switch to scoped loop

by Javier Carrasco

This series fixes a wrong handling of the child node within the for_each_child_of_node() by adding the missing calls to of_node_put() to make it compatible with stable kernels that don't provide the scoped variant of the macro, which is more secure and was introduced early this year. The switch to the scoped macro is the next patch, which makes the coe more robust and will avoid such issues in new error paths. Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> --- Javier Carrasco (2): dmaengine: mv_xor: fix child node refcount handling in early exit dmaengine: mv_xor: switch to for_each_child_of_node_scoped() drivers/dma/mv_xor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- base-commit: d61a00525464bfc5fe92c6ad713350988e492b88 change-id: 20241011-dma_mv_xor_of_node_put-5cc4126746a2 Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

8 months

2
2
0 0

[tip: x86/urgent] virt: tdx-guest: Just leak decrypted memory on unrecoverable errors

by tip-bot2 for Li RongQing

The following commit has been merged into the x86/urgent branch of tip: Commit-ID: 10331a93486ffb7b85ceea9da48a37da8cc16bdf Gitweb: https://git.kernel.org/tip/10331a93486ffb7b85ceea9da48a37da8cc16bdf Author: Li RongQing <lirongqing(a)baidu.com> AuthorDate: Wed, 19 Jun 2024 19:18:01 +08:00 Committer: Dave Hansen <dave.hansen(a)linux.intel.com> CommitterDate: Wed, 18 Dec 2024 06:07:55 -08:00 virt: tdx-guest: Just leak decrypted memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. Leak the decrypted memory when set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call WARN_ONCE(). Fixes: f4738f56d1dc ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS") Signed-off-by: Li RongQing <lirongqing(a)baidu.com> Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Rick Edgecombe <rick.p.edgecombe(a)intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/all/20240619111801.25630-1-lirongqing%40baidu.com --- drivers/virt/coco/tdx-guest/tdx-guest.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/virt/coco/tdx-guest/tdx-guest.c b/drivers/virt/coco/tdx-guest/tdx-guest.c index d7db6c8..224e7dd 100644 --- a/drivers/virt/coco/tdx-guest/tdx-guest.c +++ b/drivers/virt/coco/tdx-guest/tdx-guest.c @@ -124,10 +124,8 @@ static void *alloc_quote_buf(void) if (!addr) return NULL; - if (set_memory_decrypted((unsigned long)addr, count)) { - free_pages_exact(addr, len); + if (set_memory_decrypted((unsigned long)addr, count)) return NULL; - } return addr; }

8 months

1
0
0 0

[PATCH V5 1/4] perf/x86/intel/ds: Add PEBS format 6

by kan.liang＠linux.intel.com

From: Kan Liang <kan.liang(a)linux.intel.com> The only difference between 5 and 6 is the new counters snapshotting group, without the following counters snapshotting enabling patches, it's impossible to utilize the feature in a PEBS record. It's safe to share the same code path with format 5. Add format 6, so the end user can at least utilize the legacy PEBS features. Fixes: a932aa0e868f ("perf/x86: Add Lunar Lake and Arrow Lake support") Signed-off-by: Kan Liang <kan.liang(a)linux.intel.com> Cc: stable(a)vger.kernel.org --- New patch since V4 arch/x86/events/intel/ds.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 8dcf90f6fb59..ba74e1198328 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -2551,6 +2551,7 @@ void __init intel_ds_init(void) x86_pmu.large_pebs_flags |= PERF_SAMPLE_TIME; break; + case 6: case 5: x86_pmu.pebs_ept = 1; fallthrough; -- 2.38.1

8 months

2
1
0 0

[PATCH RESEND] phy: Fix error handling in tegra_xusb_port_init

by Ma Ke

The reference count of the device incremented in device_initialize() is not decremented when device_add() fails. Add a put_device() call before returning from the function to decrement reference count for cleanup. Or it could cause memory leak. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Ma Ke <make_ruc2021(a)163.com> --- drivers/phy/tegra/xusb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 79d4814d758d..c89df95aa6ca 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -548,16 +548,16 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port, err = dev_set_name(&port->dev, "%s-%u", name, index); if (err < 0) - goto unregister; + goto put_device; err = device_add(&port->dev); if (err < 0) - goto unregister; + goto put_device; return 0; -unregister: - device_unregister(&port->dev); +put_device: + put_device(&port->dev); return err; } -- 2.25.1

8 months

1
0
0 0

[PATCH] usb: gadget: f_fs: Remove WARN_ON in functionfs_bind

by Akash M

This commit addresses an issue related to below kernel panic where panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON in functionsfs_bind, which easily leads to the following scenarios. 1.adb_write in adbd 2. UDC write via configfs ================= ===================== ->usb_ffs_open_thread() ->UDC write ->open_functionfs() ->configfs_write_iter() ->adb_open() ->gadget_dev_desc_UDC_store() ->adb_write() ->usb_gadget_register_driver_owner ->driver_register() ->StartMonitor() ->bus_add_driver() ->adb_read() ->gadget_bind_driver() <times-out without BIND event> ->configfs_composite_bind() ->usb_add_function() ->open_functionfs() ->ffs_func_bind() ->adb_open() ->functionfs_bind() <ffs->state !=FFS_ACTIVE> The adb_open, adb_read, and adb_write operations are invoked from the daemon, but trying to bind the function is a process that is invoked by UDC write through configfs, which opens up the possibility of a race condition between the two paths. In this race scenario, the kernel panic occurs due to the WARN_ON from functionfs_bind when panic_on_warn is enabled. This commit fixes the kernel panic by removing the unnecessary WARN_ON. Kernel panic - not syncing: kernel: panic_on_warn set ... [ 14.542395] Call trace: [ 14.542464] ffs_func_bind+0x1c8/0x14a8 [ 14.542468] usb_add_function+0xcc/0x1f0 [ 14.542473] configfs_composite_bind+0x468/0x588 [ 14.542478] gadget_bind_driver+0x108/0x27c [ 14.542483] really_probe+0x190/0x374 [ 14.542488] __driver_probe_device+0xa0/0x12c [ 14.542492] driver_probe_device+0x3c/0x220 [ 14.542498] __driver_attach+0x11c/0x1fc [ 14.542502] bus_for_each_dev+0x104/0x160 [ 14.542506] driver_attach+0x24/0x34 [ 14.542510] bus_add_driver+0x154/0x270 [ 14.542514] driver_register+0x68/0x104 [ 14.542518] usb_gadget_register_driver_owner+0x48/0xf4 [ 14.542523] gadget_dev_desc_UDC_store+0xf8/0x144 [ 14.542526] configfs_write_iter+0xf0/0x138 Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Cc: stable(a)vger.kernel.org Signed-off-by: Akash M <akash.m5(a)samsung.com> diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 2920f8000bbd..92c883440e02 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2285,7 +2285,7 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) struct usb_gadget_strings **lang; int first_id; - if (WARN_ON(ffs->state != FFS_ACTIVE + if ((ffs->state != FFS_ACTIVE || test_and_set_bit(FFS_FL_BOUND, &ffs->flags))) return -EBADFD; -- 2.17.1

8 months

3
2
0 0

[PATCH v2] PCI: fix reference leak in pci_alloc_child_bus()

by Ma Ke

When device_register(&child->dev) failed, calling put_device() to explicitly release child->dev. Otherwise, it could cause double free problem. Found by code review. Cc: stable(a)vger.kernel.org Fixes: 4f535093cf8f ("PCI: Put pci_dev in device tree as early as possible") Signed-off-by: Ma Ke <make_ruc2021(a)163.com> --- Changes in v2: - modified the patch as suggestions. --- drivers/pci/probe.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2e81ab0f5a25..a61070ce5f88 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1174,7 +1174,10 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, add_dev: pci_set_bus_msi_domain(child); ret = device_register(&child->dev); - WARN_ON(ret < 0); + if (WARN_ON(ret < 0)) { + put_device(&child->dev); + return ERR_PTR(ret); + } pcibios_add_bus(child); -- 2.25.1

8 months

1
0
0 0

[PATCH v2 1/2] HID: hid-plantronics: Add mic mute mapping and generalize quirks

by Wade Wang

From: Terry Junge <linuxhid(a)cosmicgizmosystems.com> Add mapping for headset mute key events. Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic. The quirk logic did not keep track of the actual previous key so any key event occurring in less than or equal to 5ms was ignored. Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk. It had the same logic issue as the double key quirk and was actually masking the as designed behavior of most of the headsets. It's occurrence should be minimized with the ALSA control naming quirk that is part of the patch set. Signed-off-by: Terry Junge <linuxhid(a)cosmicgizmosystems.com> Signed-off-by: Wade Wang <wade.wang(a)hp.com> Cc: stable(a)vger.kernel.org --- V1 -> V2: Optimize out 2 macros - no functional changes drivers/hid/hid-plantronics.c | 144 ++++++++++++++++------------------ 1 file changed, 67 insertions(+), 77 deletions(-) diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c index 25cfd964dc25..acb9eb18f7cc 100644 --- a/drivers/hid/hid-plantronics.c +++ b/drivers/hid/hid-plantronics.c @@ -6,9 +6,6 @@ * Copyright (c) 2015-2018 Terry Junge <terry.junge(a)plantronics.com> */ -/* - */ - #include "hid-ids.h" #include <linux/hid.h> @@ -23,30 +20,28 @@ #define PLT_VOL_UP 0x00b1 #define PLT_VOL_DOWN 0x00b2 +#define PLT_MIC_MUTE 0x00b5 #define PLT1_VOL_UP (PLT_HID_1_0_PAGE | PLT_VOL_UP) #define PLT1_VOL_DOWN (PLT_HID_1_0_PAGE | PLT_VOL_DOWN) +#define PLT1_MIC_MUTE (PLT_HID_1_0_PAGE | PLT_MIC_MUTE) #define PLT2_VOL_UP (PLT_HID_2_0_PAGE | PLT_VOL_UP) #define PLT2_VOL_DOWN (PLT_HID_2_0_PAGE | PLT_VOL_DOWN) +#define PLT2_MIC_MUTE (PLT_HID_2_0_PAGE | PLT_MIC_MUTE) +#define HID_TELEPHONY_MUTE (HID_UP_TELEPHONY | 0x2f) +#define HID_CONSUMER_MUTE (HID_UP_CONSUMER | 0xe2) #define PLT_DA60 0xda60 #define PLT_BT300_MIN 0x0413 #define PLT_BT300_MAX 0x0418 - -#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \ - (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) - -#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0) -#define PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS BIT(1) - #define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */ -#define PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT 220 /* ms */ struct plt_drv_data { unsigned long device_type; - unsigned long last_volume_key_ts; - u32 quirks; + unsigned long last_key_ts; + unsigned long double_key_to; + __u16 last_key; }; static int plantronics_input_mapping(struct hid_device *hdev, @@ -58,34 +53,43 @@ static int plantronics_input_mapping(struct hid_device *hdev, unsigned short mapped_key; struct plt_drv_data *drv_data = hid_get_drvdata(hdev); unsigned long plt_type = drv_data->device_type; + int allow_mute = usage->hid == HID_TELEPHONY_MUTE; + int allow_consumer = field->application == HID_CP_CONSUMERCONTROL && + (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER && + usage->hid != HID_CONSUMER_MUTE; /* special case for PTT products */ if (field->application == HID_GD_JOYSTICK) goto defaulted; - /* handle volume up/down mapping */ /* non-standard types or multi-HID interfaces - plt_type is PID */ if (!(plt_type & HID_USAGE_PAGE)) { switch (plt_type) { case PLT_DA60: - if (PLT_ALLOW_CONSUMER) + if (allow_consumer) goto defaulted; - goto ignored; + if (usage->hid == HID_CONSUMER_MUTE) { + mapped_key = KEY_MICMUTE; + goto mapped; + } + break; default: - if (PLT_ALLOW_CONSUMER) + if (allow_consumer || allow_mute) goto defaulted; } + goto ignored; } - /* handle standard types - plt_type is 0xffa0uuuu or 0xffa2uuuu */ - /* 'basic telephony compliant' - allow default consumer page map */ - else if ((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY && - (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) { - if (PLT_ALLOW_CONSUMER) - goto defaulted; - } - /* not 'basic telephony' - apply legacy mapping */ - /* only map if the field is in the device's primary vendor page */ - else if (!((field->application ^ plt_type) & HID_USAGE_PAGE)) { + + /* handle standard consumer control mapping */ + /* and standard telephony mic mute mapping */ + if (allow_consumer || allow_mute) + goto defaulted; + + /* handle vendor unique types - plt_type is 0xffa0uuuu or 0xffa2uuuu */ + /* if not 'basic telephony compliant' - map vendor unique controls */ + if (!((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY && + (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) && + !((field->application ^ plt_type) & HID_USAGE_PAGE)) switch (usage->hid) { case PLT1_VOL_UP: case PLT2_VOL_UP: @@ -95,8 +99,11 @@ static int plantronics_input_mapping(struct hid_device *hdev, case PLT2_VOL_DOWN: mapped_key = KEY_VOLUMEDOWN; goto mapped; + case PLT1_MIC_MUTE: + case PLT2_MIC_MUTE: + mapped_key = KEY_MICMUTE; + goto mapped; } - } /* * Future mapping of call control or other usages, @@ -105,6 +112,8 @@ static int plantronics_input_mapping(struct hid_device *hdev, */ ignored: + hid_dbg(hdev, "usage: %08x (appl: %08x) - ignored\n", + usage->hid, field->application); return -1; defaulted: @@ -123,38 +132,26 @@ static int plantronics_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct plt_drv_data *drv_data = hid_get_drvdata(hdev); + unsigned long prev_tsto, cur_ts; + __u16 prev_key, cur_key; - if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) { - unsigned long prev_ts, cur_ts; + /* Usages are filtered in plantronics_usages. */ - /* Usages are filtered in plantronics_usages. */ + /* HZ too low for ms resolution - double key detection disabled */ + /* or it is a key release - handle key presses only. */ + if (!drv_data->double_key_to || !value) + return 0; - if (!value) /* Handle key presses only. */ - return 0; + prev_tsto = drv_data->last_key_ts + drv_data->double_key_to; + cur_ts = drv_data->last_key_ts = jiffies; + prev_key = drv_data->last_key; + cur_key = drv_data->last_key = usage->code; - prev_ts = drv_data->last_volume_key_ts; - cur_ts = jiffies; - if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT) - return 1; /* Ignore the repeated key. */ - - drv_data->last_volume_key_ts = cur_ts; + /* If the same key occurs in <= double_key_to -- ignore it */ + if (prev_key == cur_key && time_before_eq(cur_ts, prev_tsto)) { + hid_dbg(hdev, "double key %d ignored\n", cur_key); + return 1; /* Ignore the repeated key. */ } - if (drv_data->quirks & PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS) { - unsigned long prev_ts, cur_ts; - - /* Usages are filtered in plantronics_usages. */ - - if (!value) /* Handle key presses only. */ - return 0; - - prev_ts = drv_data->last_volume_key_ts; - cur_ts = jiffies; - if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT) - return 1; /* Ignore the followed opposite volume key. */ - - drv_data->last_volume_key_ts = cur_ts; - } - return 0; } @@ -196,12 +193,16 @@ static int plantronics_probe(struct hid_device *hdev, ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed\n"); - goto err; + return ret; } drv_data->device_type = plantronics_device_type(hdev); - drv_data->quirks = id->driver_data; - drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT); + drv_data->double_key_to = msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT); + drv_data->last_key_ts = jiffies - drv_data->double_key_to; + + /* if HZ does not allow ms resolution - disable double key detection */ + if (drv_data->double_key_to < PLT_DOUBLE_KEY_TIMEOUT) + drv_data->double_key_to = 0; hid_set_drvdata(hdev, drv_data); @@ -210,29 +211,10 @@ static int plantronics_probe(struct hid_device *hdev, if (ret) hid_err(hdev, "hw start failed\n"); -err: return ret; } static const struct hid_device_id plantronics_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES), - .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES), - .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) }, { } }; @@ -241,6 +223,14 @@ MODULE_DEVICE_TABLE(hid, plantronics_devices); static const struct hid_usage_id plantronics_usages[] = { { HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID }, { HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID }, + { HID_TELEPHONY_MUTE, EV_KEY, HID_ANY_ID }, + { HID_CONSUMER_MUTE, EV_KEY, HID_ANY_ID }, + { PLT2_VOL_UP, EV_KEY, HID_ANY_ID }, + { PLT2_VOL_DOWN, EV_KEY, HID_ANY_ID }, + { PLT2_MIC_MUTE, EV_KEY, HID_ANY_ID }, + { PLT1_VOL_UP, EV_KEY, HID_ANY_ID }, + { PLT1_VOL_DOWN, EV_KEY, HID_ANY_ID }, + { PLT1_MIC_MUTE, EV_KEY, HID_ANY_ID }, { HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR } }; -- 2.43.0

8 months

1
1
0 0

[PATCH v2 1/2] HID: hid-plantronics: Add mic mute mapping and generalize quirks

by Wade Wang

From: Terry Junge <linuxhid(a)cosmicgizmosystems.com> Add mapping for headset mute key events. Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic. The quirk logic did not keep track of the actual previous key so any key event occurring in less than or equal to 5ms was ignored. Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk. It had the same logic issue as the double key quirk and was actually masking the as designed behavior of most of the headsets. It's occurrence should be minimized with the ALSA control naming quirk that is part of the patch set. Signed-off-by: Terry Junge <linuxhid(a)cosmicgizmosystems.com> Signed-off-by: Wade Wang <wade.wang(a)hp.com> Cc: stable(a)vger.kernel.org --- V1 -> V2: Optimize out 2 macros - no functional changes drivers/hid/hid-plantronics.c | 144 ++++++++++++++++------------------ 1 file changed, 67 insertions(+), 77 deletions(-) diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c index 25cfd964dc25..acb9eb18f7cc 100644 --- a/drivers/hid/hid-plantronics.c +++ b/drivers/hid/hid-plantronics.c @@ -6,9 +6,6 @@ * Copyright (c) 2015-2018 Terry Junge <terry.junge(a)plantronics.com> */ -/* - */ - #include "hid-ids.h" #include <linux/hid.h> @@ -23,30 +20,28 @@ #define PLT_VOL_UP 0x00b1 #define PLT_VOL_DOWN 0x00b2 +#define PLT_MIC_MUTE 0x00b5 #define PLT1_VOL_UP (PLT_HID_1_0_PAGE | PLT_VOL_UP) #define PLT1_VOL_DOWN (PLT_HID_1_0_PAGE | PLT_VOL_DOWN) +#define PLT1_MIC_MUTE (PLT_HID_1_0_PAGE | PLT_MIC_MUTE) #define PLT2_VOL_UP (PLT_HID_2_0_PAGE | PLT_VOL_UP) #define PLT2_VOL_DOWN (PLT_HID_2_0_PAGE | PLT_VOL_DOWN) +#define PLT2_MIC_MUTE (PLT_HID_2_0_PAGE | PLT_MIC_MUTE) +#define HID_TELEPHONY_MUTE (HID_UP_TELEPHONY | 0x2f) +#define HID_CONSUMER_MUTE (HID_UP_CONSUMER | 0xe2) #define PLT_DA60 0xda60 #define PLT_BT300_MIN 0x0413 #define PLT_BT300_MAX 0x0418 - -#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \ - (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER) - -#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0) -#define PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS BIT(1) - #define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */ -#define PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT 220 /* ms */ struct plt_drv_data { unsigned long device_type; - unsigned long last_volume_key_ts; - u32 quirks; + unsigned long last_key_ts; + unsigned long double_key_to; + __u16 last_key; }; static int plantronics_input_mapping(struct hid_device *hdev, @@ -58,34 +53,43 @@ static int plantronics_input_mapping(struct hid_device *hdev, unsigned short mapped_key; struct plt_drv_data *drv_data = hid_get_drvdata(hdev); unsigned long plt_type = drv_data->device_type; + int allow_mute = usage->hid == HID_TELEPHONY_MUTE; + int allow_consumer = field->application == HID_CP_CONSUMERCONTROL && + (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER && + usage->hid != HID_CONSUMER_MUTE; /* special case for PTT products */ if (field->application == HID_GD_JOYSTICK) goto defaulted; - /* handle volume up/down mapping */ /* non-standard types or multi-HID interfaces - plt_type is PID */ if (!(plt_type & HID_USAGE_PAGE)) { switch (plt_type) { case PLT_DA60: - if (PLT_ALLOW_CONSUMER) + if (allow_consumer) goto defaulted; - goto ignored; + if (usage->hid == HID_CONSUMER_MUTE) { + mapped_key = KEY_MICMUTE; + goto mapped; + } + break; default: - if (PLT_ALLOW_CONSUMER) + if (allow_consumer || allow_mute) goto defaulted; } + goto ignored; } - /* handle standard types - plt_type is 0xffa0uuuu or 0xffa2uuuu */ - /* 'basic telephony compliant' - allow default consumer page map */ - else if ((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY && - (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) { - if (PLT_ALLOW_CONSUMER) - goto defaulted; - } - /* not 'basic telephony' - apply legacy mapping */ - /* only map if the field is in the device's primary vendor page */ - else if (!((field->application ^ plt_type) & HID_USAGE_PAGE)) { + + /* handle standard consumer control mapping */ + /* and standard telephony mic mute mapping */ + if (allow_consumer || allow_mute) + goto defaulted; + + /* handle vendor unique types - plt_type is 0xffa0uuuu or 0xffa2uuuu */ + /* if not 'basic telephony compliant' - map vendor unique controls */ + if (!((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY && + (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) && + !((field->application ^ plt_type) & HID_USAGE_PAGE)) switch (usage->hid) { case PLT1_VOL_UP: case PLT2_VOL_UP: @@ -95,8 +99,11 @@ static int plantronics_input_mapping(struct hid_device *hdev, case PLT2_VOL_DOWN: mapped_key = KEY_VOLUMEDOWN; goto mapped; + case PLT1_MIC_MUTE: + case PLT2_MIC_MUTE: + mapped_key = KEY_MICMUTE; + goto mapped; } - } /* * Future mapping of call control or other usages, @@ -105,6 +112,8 @@ static int plantronics_input_mapping(struct hid_device *hdev, */ ignored: + hid_dbg(hdev, "usage: %08x (appl: %08x) - ignored\n", + usage->hid, field->application); return -1; defaulted: @@ -123,38 +132,26 @@ static int plantronics_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct plt_drv_data *drv_data = hid_get_drvdata(hdev); + unsigned long prev_tsto, cur_ts; + __u16 prev_key, cur_key; - if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) { - unsigned long prev_ts, cur_ts; + /* Usages are filtered in plantronics_usages. */ - /* Usages are filtered in plantronics_usages. */ + /* HZ too low for ms resolution - double key detection disabled */ + /* or it is a key release - handle key presses only. */ + if (!drv_data->double_key_to || !value) + return 0; - if (!value) /* Handle key presses only. */ - return 0; + prev_tsto = drv_data->last_key_ts + drv_data->double_key_to; + cur_ts = drv_data->last_key_ts = jiffies; + prev_key = drv_data->last_key; + cur_key = drv_data->last_key = usage->code; - prev_ts = drv_data->last_volume_key_ts; - cur_ts = jiffies; - if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT) - return 1; /* Ignore the repeated key. */ - - drv_data->last_volume_key_ts = cur_ts; + /* If the same key occurs in <= double_key_to -- ignore it */ + if (prev_key == cur_key && time_before_eq(cur_ts, prev_tsto)) { + hid_dbg(hdev, "double key %d ignored\n", cur_key); + return 1; /* Ignore the repeated key. */ } - if (drv_data->quirks & PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS) { - unsigned long prev_ts, cur_ts; - - /* Usages are filtered in plantronics_usages. */ - - if (!value) /* Handle key presses only. */ - return 0; - - prev_ts = drv_data->last_volume_key_ts; - cur_ts = jiffies; - if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT) - return 1; /* Ignore the followed opposite volume key. */ - - drv_data->last_volume_key_ts = cur_ts; - } - return 0; } @@ -196,12 +193,16 @@ static int plantronics_probe(struct hid_device *hdev, ret = hid_parse(hdev); if (ret) { hid_err(hdev, "parse failed\n"); - goto err; + return ret; } drv_data->device_type = plantronics_device_type(hdev); - drv_data->quirks = id->driver_data; - drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT); + drv_data->double_key_to = msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT); + drv_data->last_key_ts = jiffies - drv_data->double_key_to; + + /* if HZ does not allow ms resolution - disable double key detection */ + if (drv_data->double_key_to < PLT_DOUBLE_KEY_TIMEOUT) + drv_data->double_key_to = 0; hid_set_drvdata(hdev, drv_data); @@ -210,29 +211,10 @@ static int plantronics_probe(struct hid_device *hdev, if (ret) hid_err(hdev, "hw start failed\n"); -err: return ret; } static const struct hid_device_id plantronics_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES), - .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES), - .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, - { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, - USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES), - .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS }, { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) }, { } }; @@ -241,6 +223,14 @@ MODULE_DEVICE_TABLE(hid, plantronics_devices); static const struct hid_usage_id plantronics_usages[] = { { HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID }, { HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID }, + { HID_TELEPHONY_MUTE, EV_KEY, HID_ANY_ID }, + { HID_CONSUMER_MUTE, EV_KEY, HID_ANY_ID }, + { PLT2_VOL_UP, EV_KEY, HID_ANY_ID }, + { PLT2_VOL_DOWN, EV_KEY, HID_ANY_ID }, + { PLT2_MIC_MUTE, EV_KEY, HID_ANY_ID }, + { PLT1_VOL_UP, EV_KEY, HID_ANY_ID }, + { PLT1_VOL_DOWN, EV_KEY, HID_ANY_ID }, + { PLT1_MIC_MUTE, EV_KEY, HID_ANY_ID }, { HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR } }; -- 2.43.0

8 months

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024