December 2024 - Linux-stable-mirror

[PATCH AUTOSEL 6.6 1/6] misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle

by Sasha Levin

From: Parker Newman <pnewman(a)connecttech.com> [ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46… Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Parker Newman <pnewman(a)connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.17278809… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/misc/eeprom/eeprom_93cx6.c | 10 ++++++++++ include/linux/eeprom_93cx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 9627294fe3e95..4c9827fe92173 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -186,6 +186,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 16 bits. */ @@ -252,6 +257,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 8 bits. */ diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h index c860c72a921d0..3a485cc0e0fa0 100644 --- a/include/linux/eeprom_93cx6.h +++ b/include/linux/eeprom_93cx6.h @@ -11,6 +11,8 @@ Supported chipsets: 93c46, 93c56 and 93c66. */ +#include <linux/bits.h> + /* * EEPROM operation defines. */ @@ -34,6 +36,7 @@ * @register_write(struct eeprom_93cx6 *eeprom): handler to * write to the eeprom register by using all reg_* fields. * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines + * @quirks: eeprom or controller quirks * @drive_data: Set if we're driving the data line. * @reg_data_in: register field to indicate data input * @reg_data_out: register field to indicate data output @@ -50,6 +53,9 @@ struct eeprom_93cx6 { void (*register_write)(struct eeprom_93cx6 *eeprom); int width; + unsigned int quirks; +/* Some EEPROMs require an extra clock cycle before reading */ +#define PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE BIT(0) char drive_data; char reg_data_in; @@ -71,3 +77,8 @@ extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data); + +static inline bool has_quirk_extra_read_cycle(struct eeprom_93cx6 *eeprom) +{ + return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; +} -- 2.43.0

8 months, 3 weeks

1
5
0 0

[PATCH AUTOSEL 6.11 1/7] misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle

by Sasha Levin

From: Parker Newman <pnewman(a)connecttech.com> [ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46… Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Parker Newman <pnewman(a)connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.17278809… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/misc/eeprom/eeprom_93cx6.c | 10 ++++++++++ include/linux/eeprom_93cx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 9627294fe3e95..4c9827fe92173 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -186,6 +186,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 16 bits. */ @@ -252,6 +257,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 8 bits. */ diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h index c860c72a921d0..3a485cc0e0fa0 100644 --- a/include/linux/eeprom_93cx6.h +++ b/include/linux/eeprom_93cx6.h @@ -11,6 +11,8 @@ Supported chipsets: 93c46, 93c56 and 93c66. */ +#include <linux/bits.h> + /* * EEPROM operation defines. */ @@ -34,6 +36,7 @@ * @register_write(struct eeprom_93cx6 *eeprom): handler to * write to the eeprom register by using all reg_* fields. * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines + * @quirks: eeprom or controller quirks * @drive_data: Set if we're driving the data line. * @reg_data_in: register field to indicate data input * @reg_data_out: register field to indicate data output @@ -50,6 +53,9 @@ struct eeprom_93cx6 { void (*register_write)(struct eeprom_93cx6 *eeprom); int width; + unsigned int quirks; +/* Some EEPROMs require an extra clock cycle before reading */ +#define PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE BIT(0) char drive_data; char reg_data_in; @@ -71,3 +77,8 @@ extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data); + +static inline bool has_quirk_extra_read_cycle(struct eeprom_93cx6 *eeprom) +{ + return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; +} -- 2.43.0

8 months, 3 weeks

1
6
0 0

[PATCH AUTOSEL 6.12 1/8] misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle

by Sasha Levin

From: Parker Newman <pnewman(a)connecttech.com> [ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46… Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Signed-off-by: Parker Newman <pnewman(a)connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.17278809… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/misc/eeprom/eeprom_93cx6.c | 10 ++++++++++ include/linux/eeprom_93cx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 9627294fe3e95..4c9827fe92173 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -186,6 +186,11 @@ void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 16 bits. */ @@ -252,6 +257,11 @@ void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte, eeprom_93cx6_write_bits(eeprom, command, PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1); + if (has_quirk_extra_read_cycle(eeprom)) { + eeprom_93cx6_pulse_high(eeprom); + eeprom_93cx6_pulse_low(eeprom); + } + /* * Read the requested 8 bits. */ diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h index c860c72a921d0..3a485cc0e0fa0 100644 --- a/include/linux/eeprom_93cx6.h +++ b/include/linux/eeprom_93cx6.h @@ -11,6 +11,8 @@ Supported chipsets: 93c46, 93c56 and 93c66. */ +#include <linux/bits.h> + /* * EEPROM operation defines. */ @@ -34,6 +36,7 @@ * @register_write(struct eeprom_93cx6 *eeprom): handler to * write to the eeprom register by using all reg_* fields. * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines + * @quirks: eeprom or controller quirks * @drive_data: Set if we're driving the data line. * @reg_data_in: register field to indicate data input * @reg_data_out: register field to indicate data output @@ -50,6 +53,9 @@ struct eeprom_93cx6 { void (*register_write)(struct eeprom_93cx6 *eeprom); int width; + unsigned int quirks; +/* Some EEPROMs require an extra clock cycle before reading */ +#define PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE BIT(0) char drive_data; char reg_data_in; @@ -71,3 +77,8 @@ extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data); + +static inline bool has_quirk_extra_read_cycle(struct eeprom_93cx6 *eeprom) +{ + return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; +} -- 2.43.0

8 months, 3 weeks

1
7
0 0

[PATCH AUTOSEL 6.6] fs/ntfs3: Fix case when unmarked clusters intersect with zone

by Sasha Levin

From: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> [ Upstream commit 5fc982fe7eca9d0cf7b25832450ebd4f7c8e1c36 ] Reported-by: syzbot+7f3761b790fa41d0f3d5(a)syzkaller.appspotmail.com Signed-off-by: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- fs/ntfs3/run.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) diff --git a/fs/ntfs3/run.c b/fs/ntfs3/run.c index cb8cf0161177b..44e93ad491ba7 100644 --- a/fs/ntfs3/run.c +++ b/fs/ntfs3/run.c @@ -1053,8 +1053,8 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, { int ret, err; CLST next_vcn, lcn, len; - size_t index; - bool ok; + size_t index, done; + bool ok, zone; struct wnd_bitmap *wnd; ret = run_unpack(run, sbi, ino, svcn, evcn, vcn, run_buf, run_buf_size); @@ -1085,8 +1085,9 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, continue; down_read_nested(&wnd->rw_lock, BITMAP_MUTEX_CLUSTERS); + zone = max(wnd->zone_bit, lcn) < min(wnd->zone_end, lcn + len); /* Check for free blocks. */ - ok = wnd_is_used(wnd, lcn, len); + ok = !zone && wnd_is_used(wnd, lcn, len); up_read(&wnd->rw_lock); if (ok) continue; @@ -1094,14 +1095,33 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, /* Looks like volume is corrupted. */ ntfs_set_state(sbi, NTFS_DIRTY_ERROR); - if (down_write_trylock(&wnd->rw_lock)) { - /* Mark all zero bits as used in range [lcn, lcn+len). */ - size_t done; - err = wnd_set_used_safe(wnd, lcn, len, &done); - up_write(&wnd->rw_lock); - if (err) - return err; + if (!down_write_trylock(&wnd->rw_lock)) + continue; + + if (zone) { + /* + * Range [lcn, lcn + len) intersects with zone. + * To avoid complex with zone just turn it off. + */ + wnd_zone_set(wnd, 0, 0); + } + + /* Mark all zero bits as used in range [lcn, lcn+len). */ + err = wnd_set_used_safe(wnd, lcn, len, &done); + if (zone) { + /* Restore zone. Lock mft run. */ + struct rw_semaphore *lock; + lock = is_mounted(sbi) ? &sbi->mft.ni->file.run_lock : + NULL; + if (lock) + down_read(lock); + ntfs_refresh_zone(sbi); + if (lock) + up_read(lock); } + up_write(&wnd->rw_lock); + if (err) + return err; } return ret; -- 2.43.0

8 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 6.11 1/2] fs/ntfs3: Fix case when unmarked clusters intersect with zone

by Sasha Levin

From: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> [ Upstream commit 5fc982fe7eca9d0cf7b25832450ebd4f7c8e1c36 ] Reported-by: syzbot+7f3761b790fa41d0f3d5(a)syzkaller.appspotmail.com Signed-off-by: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- fs/ntfs3/run.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-) diff --git a/fs/ntfs3/run.c b/fs/ntfs3/run.c index cb8cf0161177b..44e93ad491ba7 100644 --- a/fs/ntfs3/run.c +++ b/fs/ntfs3/run.c @@ -1053,8 +1053,8 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, { int ret, err; CLST next_vcn, lcn, len; - size_t index; - bool ok; + size_t index, done; + bool ok, zone; struct wnd_bitmap *wnd; ret = run_unpack(run, sbi, ino, svcn, evcn, vcn, run_buf, run_buf_size); @@ -1085,8 +1085,9 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, continue; down_read_nested(&wnd->rw_lock, BITMAP_MUTEX_CLUSTERS); + zone = max(wnd->zone_bit, lcn) < min(wnd->zone_end, lcn + len); /* Check for free blocks. */ - ok = wnd_is_used(wnd, lcn, len); + ok = !zone && wnd_is_used(wnd, lcn, len); up_read(&wnd->rw_lock); if (ok) continue; @@ -1094,14 +1095,33 @@ int run_unpack_ex(struct runs_tree *run, struct ntfs_sb_info *sbi, CLST ino, /* Looks like volume is corrupted. */ ntfs_set_state(sbi, NTFS_DIRTY_ERROR); - if (down_write_trylock(&wnd->rw_lock)) { - /* Mark all zero bits as used in range [lcn, lcn+len). */ - size_t done; - err = wnd_set_used_safe(wnd, lcn, len, &done); - up_write(&wnd->rw_lock); - if (err) - return err; + if (!down_write_trylock(&wnd->rw_lock)) + continue; + + if (zone) { + /* + * Range [lcn, lcn + len) intersects with zone. + * To avoid complex with zone just turn it off. + */ + wnd_zone_set(wnd, 0, 0); + } + + /* Mark all zero bits as used in range [lcn, lcn+len). */ + err = wnd_set_used_safe(wnd, lcn, len, &done); + if (zone) { + /* Restore zone. Lock mft run. */ + struct rw_semaphore *lock; + lock = is_mounted(sbi) ? &sbi->mft.ni->file.run_lock : + NULL; + if (lock) + down_read(lock); + ntfs_refresh_zone(sbi); + if (lock) + up_read(lock); } + up_write(&wnd->rw_lock); + if (err) + return err; } return ret; -- 2.43.0

8 months, 3 weeks

1
1
0 0

[PATCH AUTOSEL 6.12 1/3] fs/ntfs3: Fix warning in ni_fiemap

by Sasha Levin

From: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> [ Upstream commit e2705dd3d16d1000f1fd8193d82447065de8c899 ] Use local runs_tree instead of cached. This way excludes rw_semaphore lock. Reported-by: syzbot+1c25748a40fe79b8a119(a)syzkaller.appspotmail.com Signed-off-by: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- fs/ntfs3/attrib.c | 9 ++-- fs/ntfs3/frecord.c | 103 +++++++-------------------------------------- fs/ntfs3/ntfs_fs.h | 3 +- 3 files changed, 21 insertions(+), 94 deletions(-) diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 0763202d00c99..8d789b017fa9b 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -977,7 +977,7 @@ int attr_data_get_block(struct ntfs_inode *ni, CLST vcn, CLST clen, CLST *lcn, /* Check for compressed frame. */ err = attr_is_frame_compressed(ni, attr_b, vcn >> NTFS_LZNT_CUNIT, - &hint); + &hint, run); if (err) goto out; @@ -1521,16 +1521,16 @@ int attr_wof_frame_info(struct ntfs_inode *ni, struct ATTRIB *attr, * attr_is_frame_compressed - Used to detect compressed frame. * * attr - base (primary) attribute segment. + * run - run to use, usually == &ni->file.run. * Only base segments contains valid 'attr->nres.c_unit' */ int attr_is_frame_compressed(struct ntfs_inode *ni, struct ATTRIB *attr, - CLST frame, CLST *clst_data) + CLST frame, CLST *clst_data, struct runs_tree *run) { int err; u32 clst_frame; CLST clen, lcn, vcn, alen, slen, vcn_next; size_t idx; - struct runs_tree *run; *clst_data = 0; @@ -1542,7 +1542,6 @@ int attr_is_frame_compressed(struct ntfs_inode *ni, struct ATTRIB *attr, clst_frame = 1u << attr->nres.c_unit; vcn = frame * clst_frame; - run = &ni->file.run; if (!run_lookup_entry(run, vcn, &lcn, &clen, &idx)) { err = attr_load_runs_vcn(ni, attr->type, attr_name(attr), @@ -1678,7 +1677,7 @@ int attr_allocate_frame(struct ntfs_inode *ni, CLST frame, size_t compr_size, if (err) goto out; - err = attr_is_frame_compressed(ni, attr_b, frame, &clst_data); + err = attr_is_frame_compressed(ni, attr_b, frame, &clst_data, run); if (err) goto out; diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 41c7ffad27901..c33e818b3164c 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -1900,46 +1900,6 @@ enum REPARSE_SIGN ni_parse_reparse(struct ntfs_inode *ni, struct ATTRIB *attr, return REPARSE_LINK; } -/* - * fiemap_fill_next_extent_k - a copy of fiemap_fill_next_extent - * but it uses 'fe_k' instead of fieinfo->fi_extents_start - */ -static int fiemap_fill_next_extent_k(struct fiemap_extent_info *fieinfo, - struct fiemap_extent *fe_k, u64 logical, - u64 phys, u64 len, u32 flags) -{ - struct fiemap_extent extent; - - /* only count the extents */ - if (fieinfo->fi_extents_max == 0) { - fieinfo->fi_extents_mapped++; - return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; - } - - if (fieinfo->fi_extents_mapped >= fieinfo->fi_extents_max) - return 1; - - if (flags & FIEMAP_EXTENT_DELALLOC) - flags |= FIEMAP_EXTENT_UNKNOWN; - if (flags & FIEMAP_EXTENT_DATA_ENCRYPTED) - flags |= FIEMAP_EXTENT_ENCODED; - if (flags & (FIEMAP_EXTENT_DATA_TAIL | FIEMAP_EXTENT_DATA_INLINE)) - flags |= FIEMAP_EXTENT_NOT_ALIGNED; - - memset(&extent, 0, sizeof(extent)); - extent.fe_logical = logical; - extent.fe_physical = phys; - extent.fe_length = len; - extent.fe_flags = flags; - - memcpy(fe_k + fieinfo->fi_extents_mapped, &extent, sizeof(extent)); - - fieinfo->fi_extents_mapped++; - if (fieinfo->fi_extents_mapped == fieinfo->fi_extents_max) - return 1; - return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; -} - /* * ni_fiemap - Helper for file_fiemap(). * @@ -1950,11 +1910,9 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, __u64 vbo, __u64 len) { int err = 0; - struct fiemap_extent *fe_k = NULL; struct ntfs_sb_info *sbi = ni->mi.sbi; u8 cluster_bits = sbi->cluster_bits; - struct runs_tree *run; - struct rw_semaphore *run_lock; + struct runs_tree run; struct ATTRIB *attr; CLST vcn = vbo >> cluster_bits; CLST lcn, clen; @@ -1965,13 +1923,11 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, u32 flags; bool ok; + run_init(&run); if (S_ISDIR(ni->vfs_inode.i_mode)) { - run = &ni->dir.alloc_run; attr = ni_find_attr(ni, NULL, NULL, ATTR_ALLOC, I30_NAME, ARRAY_SIZE(I30_NAME), NULL, NULL); - run_lock = &ni->dir.run_lock; } else { - run = &ni->file.run; attr = ni_find_attr(ni, NULL, NULL, ATTR_DATA, NULL, 0, NULL, NULL); if (!attr) { @@ -1986,7 +1942,6 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, "fiemap is not supported for compressed file (cp -r)"); goto out; } - run_lock = &ni->file.run_lock; } if (!attr || !attr->non_res) { @@ -1998,51 +1953,33 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, goto out; } - /* - * To avoid lock problems replace pointer to user memory by pointer to kernel memory. - */ - fe_k = kmalloc_array(fieinfo->fi_extents_max, - sizeof(struct fiemap_extent), - GFP_NOFS | __GFP_ZERO); - if (!fe_k) { - err = -ENOMEM; - goto out; - } - end = vbo + len; alloc_size = le64_to_cpu(attr->nres.alloc_size); if (end > alloc_size) end = alloc_size; - down_read(run_lock); while (vbo < end) { if (idx == -1) { - ok = run_lookup_entry(run, vcn, &lcn, &clen, &idx); + ok = run_lookup_entry(&run, vcn, &lcn, &clen, &idx); } else { CLST vcn_next = vcn; - ok = run_get_entry(run, ++idx, &vcn, &lcn, &clen) && + ok = run_get_entry(&run, ++idx, &vcn, &lcn, &clen) && vcn == vcn_next; if (!ok) vcn = vcn_next; } if (!ok) { - up_read(run_lock); - down_write(run_lock); - err = attr_load_runs_vcn(ni, attr->type, attr_name(attr), - attr->name_len, run, vcn); - - up_write(run_lock); - down_read(run_lock); + attr->name_len, &run, vcn); if (err) break; - ok = run_lookup_entry(run, vcn, &lcn, &clen, &idx); + ok = run_lookup_entry(&run, vcn, &lcn, &clen, &idx); if (!ok) { err = -EINVAL; @@ -2067,8 +2004,9 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, } else if (is_attr_compressed(attr)) { CLST clst_data; - err = attr_is_frame_compressed( - ni, attr, vcn >> attr->nres.c_unit, &clst_data); + err = attr_is_frame_compressed(ni, attr, + vcn >> attr->nres.c_unit, + &clst_data, &run); if (err) break; if (clst_data < NTFS_LZNT_CLUSTERS) @@ -2097,8 +2035,8 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, if (vbo + dlen >= end) flags |= FIEMAP_EXTENT_LAST; - err = fiemap_fill_next_extent_k(fieinfo, fe_k, vbo, lbo, - dlen, flags); + err = fiemap_fill_next_extent(fieinfo, vbo, lbo, dlen, + flags); if (err < 0) break; @@ -2119,8 +2057,7 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, if (vbo + bytes >= end) flags |= FIEMAP_EXTENT_LAST; - err = fiemap_fill_next_extent_k(fieinfo, fe_k, vbo, lbo, bytes, - flags); + err = fiemap_fill_next_extent(fieinfo, vbo, lbo, bytes, flags); if (err < 0) break; if (err == 1) { @@ -2131,19 +2068,8 @@ int ni_fiemap(struct ntfs_inode *ni, struct fiemap_extent_info *fieinfo, vbo += bytes; } - up_read(run_lock); - - /* - * Copy to user memory out of lock - */ - if (copy_to_user(fieinfo->fi_extents_start, fe_k, - fieinfo->fi_extents_max * - sizeof(struct fiemap_extent))) { - err = -EFAULT; - } - out: - kfree(fe_k); + run_close(&run); return err; } @@ -2672,7 +2598,8 @@ int ni_read_frame(struct ntfs_inode *ni, u64 frame_vbo, struct page **pages, down_write(&ni->file.run_lock); run_truncate_around(run, le64_to_cpu(attr->nres.svcn)); frame = frame_vbo >> (cluster_bits + NTFS_LZNT_CUNIT); - err = attr_is_frame_compressed(ni, attr, frame, &clst_data); + err = attr_is_frame_compressed(ni, attr, frame, &clst_data, + run); up_write(&ni->file.run_lock); if (err) goto out1; diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 26e1e1379c04e..cd8e8374bb5a0 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -446,7 +446,8 @@ int attr_wof_frame_info(struct ntfs_inode *ni, struct ATTRIB *attr, struct runs_tree *run, u64 frame, u64 frames, u8 frame_bits, u32 *ondisk_size, u64 *vbo_data); int attr_is_frame_compressed(struct ntfs_inode *ni, struct ATTRIB *attr, - CLST frame, CLST *clst_data); + CLST frame, CLST *clst_data, + struct runs_tree *run); int attr_allocate_frame(struct ntfs_inode *ni, CLST frame, size_t compr_size, u64 new_valid); int attr_collapse_range(struct ntfs_inode *ni, u64 vbo, u64 bytes); -- 2.43.0

8 months, 3 weeks

1
2
0 0

[PATCH AUTOSEL 6.1] LoongArch: Fix sleeping in atomic context for PREEMPT_RT

by Sasha Levin

From: Huacai Chen <chenhuacai(a)loongson.cn> [ Upstream commit 88fd2b70120d52c1010257d36776876941375490 ] Commit bab1c299f3945ffe79 ("LoongArch: Fix sleeping in atomic context in setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get a "sleeping in atomic context" error: [ 0.372259] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 0.372266] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.372268] preempt_count: 1, expected: 0 [ 0.372270] RCU nest depth: 1, expected: 1 [ 0.372272] 3 locks held by swapper/1/0: [ 0.372274] #0: 900000000c9f5e60 (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x524/0x1c60 [ 0.372294] #1: 90000000087013b8 (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x50/0x140 [ 0.372305] #2: 900000047fffd388 (&zone->lock){+.+.}-{3:3}, at: __rmqueue_pcplist+0x30c/0xea0 [ 0.372314] irq event stamp: 0 [ 0.372316] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 0.372322] hardirqs last disabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0 [ 0.372329] softirqs last enabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0 [ 0.372335] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 0.372341] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7+ #1891 [ 0.372346] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022 [ 0.372349] Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 9000000100388000 [ 0.372486] 900000010038b890 0000000000000000 900000010038b898 9000000007e53788 [ 0.372492] 900000000815bcc8 900000000815bcc0 900000010038b700 0000000000000001 [ 0.372498] 0000000000000001 4b031894b9d6b725 00000000055ec000 9000000100338fc0 [ 0.372503] 00000000000000c4 0000000000000001 000000000000002d 0000000000000003 [ 0.372509] 0000000000000030 0000000000000003 00000000055ec000 0000000000000003 [ 0.372515] 900000000806d000 9000000007e53788 00000000000000b0 0000000000000004 [ 0.372521] 0000000000000000 0000000000000000 900000000c9f5f10 0000000000000000 [ 0.372526] 90000000076f12d8 9000000007e53788 9000000005924778 0000000000000000 [ 0.372532] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.372537] ... [ 0.372540] Call Trace: [ 0.372542] [<9000000005924778>] show_stack+0x38/0x180 [ 0.372548] [<90000000071519c4>] dump_stack_lvl+0x94/0xe4 [ 0.372555] [<900000000599b880>] __might_resched+0x1a0/0x260 [ 0.372561] [<90000000071675cc>] rt_spin_lock+0x4c/0x140 [ 0.372565] [<9000000005cbb768>] __rmqueue_pcplist+0x308/0xea0 [ 0.372570] [<9000000005cbed84>] get_page_from_freelist+0x564/0x1c60 [ 0.372575] [<9000000005cc0d98>] __alloc_pages_noprof+0x218/0x1820 [ 0.372580] [<900000000593b36c>] tlb_init+0x1ac/0x298 [ 0.372585] [<9000000005924b74>] per_cpu_trap_init+0x114/0x140 [ 0.372589] [<9000000005921964>] cpu_probe+0x4e4/0xa60 [ 0.372592] [<9000000005934874>] start_secondary+0x34/0xc0 [ 0.372599] [<900000000715615c>] smpboot_entry+0x64/0x6c This is because in PREEMPT_RT kernels normal spinlocks are replaced by rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling NUMA optimization completely for PREEMPT_RT kernels. Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/loongarch/mm/tlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/loongarch/mm/tlb.c b/arch/loongarch/mm/tlb.c index eeb2d815cfa2a..faf44cac403b4 100644 --- a/arch/loongarch/mm/tlb.c +++ b/arch/loongarch/mm/tlb.c @@ -279,7 +279,7 @@ void setup_tlb_handler(int cpu) /* Avoid lockdep warning */ rcu_cpu_starting(cpu); -#ifdef CONFIG_NUMA +#if defined(CONFIG_NUMA) && !defined(CONFIG_PREEMPT_RT) vec_sz = sizeof(exception_handlers); if (pcpu_handlers[cpu]) -- 2.43.0

8 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 6.6 1/3] ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 82f250ed1a1dcde0ad2a1513f85af7f9514635e8 ] The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is a different model) ships with Android 4.4 as factory OS and has the usual broken DSDT issues for x86 Android tablets. Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC and ACPI GPIO event handlers. Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list of HIDs for which not to skip i2c_client instantiation, since we do want an ACPI instantiated i2c_client for the PMIC. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/acpi/x86/utils.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index e035cec614dc8..159ac2b19672d 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -299,6 +299,18 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = { ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), }, + { + /* Acer Iconia One 8 A1-840 (non FHD version) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "BayTrail"), + /* Above strings are too generic also match BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "04/01/2014"), + }, + .driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS | + ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | + ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), @@ -404,6 +416,7 @@ static const struct acpi_device_id i2c_acpi_known_good_ids[] = { { "10EC5640", 0 }, /* RealTek ALC5640 audio codec */ { "10EC5651", 0 }, /* RealTek ALC5651 audio codec */ { "INT33F4", 0 }, /* X-Powers AXP288 PMIC */ + { "INT33F5", 0 }, /* TI Dollar Cove PMIC */ { "INT33FD", 0 }, /* Intel Crystal Cove PMIC */ { "INT34D3", 0 }, /* Intel Whiskey Cove PMIC */ { "NPCE69A", 0 }, /* Asus Transformer keyboard dock */ -- 2.43.0

8 months, 3 weeks

1
2
0 0

[PATCH AUTOSEL 6.11 1/3] ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 82f250ed1a1dcde0ad2a1513f85af7f9514635e8 ] The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is a different model) ships with Android 4.4 as factory OS and has the usual broken DSDT issues for x86 Android tablets. Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC and ACPI GPIO event handlers. Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list of HIDs for which not to skip i2c_client instantiation, since we do want an ACPI instantiated i2c_client for the PMIC. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/acpi/x86/utils.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index ab2b5fa83e1ff..24af6a10cc5fc 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -307,6 +307,18 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = { ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), }, + { + /* Acer Iconia One 8 A1-840 (non FHD version) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "BayTrail"), + /* Above strings are too generic also match BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "04/01/2014"), + }, + .driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS | + ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | + ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), @@ -412,6 +424,7 @@ static const struct acpi_device_id i2c_acpi_known_good_ids[] = { { "10EC5640", 0 }, /* RealTek ALC5640 audio codec */ { "10EC5651", 0 }, /* RealTek ALC5651 audio codec */ { "INT33F4", 0 }, /* X-Powers AXP288 PMIC */ + { "INT33F5", 0 }, /* TI Dollar Cove PMIC */ { "INT33FD", 0 }, /* Intel Crystal Cove PMIC */ { "INT34D3", 0 }, /* Intel Whiskey Cove PMIC */ { "NPCE69A", 0 }, /* Asus Transformer keyboard dock */ -- 2.43.0

8 months, 3 weeks

1
2
0 0

[PATCH AUTOSEL 6.12 1/3] ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 82f250ed1a1dcde0ad2a1513f85af7f9514635e8 ] The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which is a different model) ships with Android 4.4 as factory OS and has the usual broken DSDT issues for x86 Android tablets. Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC and ACPI GPIO event handlers. Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list of HIDs for which not to skip i2c_client instantiation, since we do want an ACPI instantiated i2c_client for the PMIC. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/acpi/x86/utils.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index 6af546b21574f..6d185a369f068 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -307,6 +307,18 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = { ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), }, + { + /* Acer Iconia One 8 A1-840 (non FHD version) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_MATCH(DMI_PRODUCT_NAME, "BayTrail"), + /* Above strings are too generic also match BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "04/01/2014"), + }, + .driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS | + ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY | + ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), @@ -411,6 +423,7 @@ static const struct acpi_device_id i2c_acpi_known_good_ids[] = { { "10EC5640", 0 }, /* RealTek ALC5640 audio codec */ { "10EC5651", 0 }, /* RealTek ALC5651 audio codec */ { "INT33F4", 0 }, /* X-Powers AXP288 PMIC */ + { "INT33F5", 0 }, /* TI Dollar Cove PMIC */ { "INT33FD", 0 }, /* Intel Crystal Cove PMIC */ { "INT34D3", 0 }, /* Intel Whiskey Cove PMIC */ { "NPCE69A", 0 }, /* Asus Transformer keyboard dock */ -- 2.43.0

8 months, 3 weeks

1
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2024