November 2024 - Linux-stable-mirror

[PATCH] mm: Respect mmap hint address when aligning for THP

by Kalesh Singh

Commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") updated __get_unmapped_area() to align the start address for the VMA to a PMD boundary if CONFIG_TRANSPARENT_HUGEPAGE=y. It does this by effectively looking up a region that is of size, request_size + PMD_SIZE, and aligning up the start to a PMD boundary. Commit 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit") opted out of this for 32bit due to regressions in mmap base randomization. Commit d4148aeab412 ("mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes") restricted this to only mmap sizes that are multiples of the PMD_SIZE due to reported regressions in some performance benchmarks -- which seemed mostly due to the reduced spatial locality of related mappings due to the forced PMD-alignment. Another unintended side effect has emerged: When a user specifies an mmap hint address, the THP alignment logic modifies the behavior, potentially ignoring the hint even if a sufficiently large gap exists at the requested hint location. Example Scenario: Consider the following simplified virtual address (VA) space: ... 0x200000-0x400000 --- VMA A 0x400000-0x600000 --- Hole 0x600000-0x800000 --- VMA B ... A call to mmap() with hint=0x400000 and len=0x200000 behaves differently: - Before THP alignment: The requested region (size 0x200000) fits into the gap at 0x400000, so the hint is respected. - After alignment: The logic searches for a region of size 0x400000 (len + PMD_SIZE) starting at 0x400000. This search fails due to the mapping at 0x600000 (VMA B), and the hint is ignored, falling back to arch_get_unmapped_area[_topdown](). In general the hint is effectively ignored, if there is any existing mapping in the below range: [mmap_hint + mmap_size, mmap_hint + mmap_size + PMD_SIZE) This changes the semantics of mmap hint; from ""Respect the hint if a sufficiently large gap exists at the requested location" to "Respect the hint only if an additional PMD-sized gap exists beyond the requested size". This has performance implications for allocators that allocate their heap using mmap but try to keep it "as contiguous as possible" by using the end of the exisiting heap as the address hint. With the new behavior it's more likely to get a much less contiguous heap, adding extra fragmentation and performance overhead. To restore the expected behavior; don't use thp_get_unmapped_area_vmflags() when the user provided a hint address. Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: Yang Shi <yang(a)os.amperecomputing.com> Cc: Rik van Riel <riel(a)surriel.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Suren Baghdasaryan <surenb(a)google.com> Cc: Minchan Kim <minchan(a)kernel.org> Cc: Hans Boehm <hboehm(a)google.com> Cc: Lokesh Gidra <lokeshgidra(a)google.com> Cc: <stable(a)vger.kernel.org> Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") Signed-off-by: Kalesh Singh <kaleshsingh(a)google.com> --- mm/mmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/mmap.c b/mm/mmap.c index 79d541f1502b..2f01f1a8e304 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -901,6 +901,7 @@ __get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, if (get_area) { addr = get_area(file, addr, len, pgoff, flags); } else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) + && !addr /* no hint */ && IS_ALIGNED(len, PMD_SIZE)) { /* Ensures that larger anonymous mappings are THP aligned. */ addr = thp_get_unmapped_area_vmflags(file, addr, len, base-commit: 2d5404caa8c7bb5c4e0435f94b28834ae5456623 -- 2.47.0.338.g60cca15819-goog

1 month, 3 weeks

4
8
0 0

[PATCH 5.15 0/5] Address CVE-2024-49974

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Backport the set of upstream patches that cap the number of concurrent background NFSv4.2 COPY operations. Chuck Lever (4): NFSD: Async COPY result needs to return a write verifier NFSD: Limit the number of concurrent async COPY operations NFSD: Initialize struct nfsd4_copy earlier NFSD: Never decrement pending_async_copies on error Dai Ngo (1): NFSD: initialize copy->cp_clp early in nfsd4_copy for use by trace point fs/nfsd/netns.h | 1 + fs/nfsd/nfs4proc.c | 36 +++++++++++++++++------------------- fs/nfsd/nfs4state.c | 1 + fs/nfsd/xdr4.h | 1 + 4 files changed, 20 insertions(+), 19 deletions(-) -- 2.47.0

1 month, 3 weeks

1
5
0 0

[PATCH 5.15 0/5] Address CVE-2024-49974

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Backport the set of upstream patches that cap the number of concurrent background NFSv4.2 COPY operations. Chuck Lever (4): NFSD: Async COPY result needs to return a write verifier NFSD: Limit the number of concurrent async COPY operations NFSD: Initialize struct nfsd4_copy earlier NFSD: Never decrement pending_async_copies on error Dai Ngo (1): NFSD: initialize copy->cp_clp early in nfsd4_copy for use by trace point fs/nfsd/netns.h | 1 + fs/nfsd/nfs4proc.c | 36 +++++++++++++++++------------------- fs/nfsd/nfs4state.c | 1 + fs/nfsd/xdr4.h | 1 + 4 files changed, 20 insertions(+), 19 deletions(-) -- 2.47.0

1 month, 3 weeks

2
19
0 0

[PATCH 6.6 0/5] Address CVE-2024-49974

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Backport the set of upstream patches that cap the number of concurrent background NFSv4.2 COPY operations. Chuck Lever (4): NFSD: Async COPY result needs to return a write verifier NFSD: Limit the number of concurrent async COPY operations NFSD: Initialize struct nfsd4_copy earlier NFSD: Never decrement pending_async_copies on error Dai Ngo (1): NFSD: initialize copy->cp_clp early in nfsd4_copy for use by trace point fs/nfsd/netns.h | 1 + fs/nfsd/nfs4proc.c | 36 +++++++++++++++++------------------- fs/nfsd/nfs4state.c | 1 + fs/nfsd/xdr4.h | 1 + 4 files changed, 20 insertions(+), 19 deletions(-) -- 2.47.0

1 month, 3 weeks

1
5
0 0

[RFC PATCH 1/2] libfs: Return ENOSPC when the directory offset range is exhausted

by cel＠kernel.org

From: Chuck Lever <chuck.lever(a)oracle.com> Testing shows that the EBUSY error return from mtree_alloc_cyclic() leaks into user space. The ERRORS section of "man creat(2)" says: > EBUSY O_EXCL was specified in flags and pathname refers > to a block device that is in use by the system > (e.g., it is mounted). ENOSPC is closer to what applications expect in this situation. Note that the normal range of simple directory offset values is 2..2^63, so hitting this error is going to be rare to impossible. Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets") Cc: <stable(a)vger.kernel.org> # v6.9+ Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> --- fs/libfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/libfs.c b/fs/libfs.c index 46966fd8bcf9..bf67954b525b 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -288,7 +288,9 @@ int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry) ret = mtree_alloc_cyclic(&octx->mt, &offset, dentry, DIR_OFFSET_MIN, LONG_MAX, &octx->next_offset, GFP_KERNEL); - if (ret < 0) + if (unlikely(ret == -EBUSY)) + return -ENOSPC; + if (unlikely(ret < 0)) return ret; offset_set(dentry, offset); -- 2.47.0

1 month, 3 weeks

2
1
0 0

[PATCH v2] usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode

by Radhey Shyam Pandey

From: Neal Frager <neal.frager(a)amd.com> When the USB3 PHY is not defined in the Linux device tree, there could still be a case where there is a USB3 PHY is active on the board and enabled by the first stage bootloader. If serdes clock is being used then the USB will fail to enumerate devices in 2.0 only mode. To solve this, make sure that the PIPE clock is deselected whenever the USB3 PHY is not defined and guarantees that the USB2 only mode will work in all cases. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: stable(a)vger.kernel.org Signed-off-by: Neal Frager <neal.frager(a)amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey(a)amd.com> --- Changes for v2: - Add stable(a)vger.kernel.org in CC. --- drivers/usb/dwc3/dwc3-xilinx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index e3738e1610db..a33a42ba0249 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -121,8 +121,11 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) * in use but the usb3-phy entry is missing from the device tree. * Therefore, skip these operations in this case. */ - if (!priv_data->usb3_phy) + if (!priv_data->usb3_phy) { + /* Deselect the PIPE Clock Select bit in FPD PIPE Clock register */ + writel(PIPE_CLK_DESELECT, priv_data->regs + XLNX_USB_FPD_PIPE_CLK); goto skip_usb3_phy; + } crst = devm_reset_control_get_exclusive(dev, "usb_crst"); if (IS_ERR(crst)) { base-commit: 744cf71b8bdfcdd77aaf58395e068b7457634b2c -- 2.34.1

1 month, 3 weeks

2
1
0 0

FAILED: patch "[PATCH] drm/xe: improve hibernation on igpu" failed to apply to 6.11-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.11-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.11.y git checkout FETCH_HEAD git cherry-pick -x 46f1f4b0f3c2a2dff9887de7c66ccc7ef482bd83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024111758-jumbo-neon-1b3c@gregkh' --subject-prefix 'PATCH 6.11.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 46f1f4b0f3c2a2dff9887de7c66ccc7ef482bd83 Mon Sep 17 00:00:00 2001 From: Matthew Auld <matthew.auld(a)intel.com> Date: Fri, 1 Nov 2024 17:01:57 +0000 Subject: [PATCH] drm/xe: improve hibernation on igpu The GGTT looks to be stored inside stolen memory on igpu which is not treated as normal RAM. The core kernel skips this memory range when creating the hibernation image, therefore when coming back from hibernation the GGTT programming is lost. This seems to cause issues with broken resume where GuC FW fails to load: [drm] *ERROR* GT0: load failed: status = 0x400000A0, time = 10ms, freq = 1250MHz (req 1300MHz), done = -1 [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 [drm] *ERROR* GT0: firmware signature verification failed [drm] *ERROR* CRITICAL: Xe has declared device 0000:00:02.0 as wedged. Current GGTT users are kernel internal and tracked as pinned, so it should be possible to hook into the existing save/restore logic that we use for dgpu, where the actual evict is skipped but on restore we importantly restore the GGTT programming. This has been confirmed to fix hibernation on at least ADL and MTL, though likely all igpu platforms are affected. This also means we have a hole in our testing, where the existing s4 tests only really test the driver hooks, and don't go as far as actually rebooting and restoring from the hibernation image and in turn powering down RAM (and therefore losing the contents of stolen). v2 (Brost) - Remove extra newline and drop unnecessary parentheses. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3275 Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost(a)intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi(a)intel.com> Signed-off-by: Matthew Brost <matthew.brost(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241101170156.213490-2-matth… (cherry picked from commit f2a6b8e396666d97ada8e8759dfb6a69d8df6380) Signed-off-by: Lucas De Marchi <lucas.demarchi(a)intel.com> diff --git a/drivers/gpu/drm/xe/xe_bo.c b/drivers/gpu/drm/xe/xe_bo.c index 74f68289f74c..2a093540354e 100644 --- a/drivers/gpu/drm/xe/xe_bo.c +++ b/drivers/gpu/drm/xe/xe_bo.c @@ -948,7 +948,10 @@ int xe_bo_restore_pinned(struct xe_bo *bo) if (WARN_ON(!xe_bo_is_pinned(bo))) return -EINVAL; - if (WARN_ON(xe_bo_is_vram(bo) || !bo->ttm.ttm)) + if (WARN_ON(xe_bo_is_vram(bo))) + return -EINVAL; + + if (WARN_ON(!bo->ttm.ttm && !xe_bo_is_stolen(bo))) return -EINVAL; if (!mem_type_is_vram(place->mem_type)) @@ -1723,6 +1726,7 @@ int xe_bo_pin_external(struct xe_bo *bo) int xe_bo_pin(struct xe_bo *bo) { + struct ttm_place *place = &bo->placements[0]; struct xe_device *xe = xe_bo_device(bo); int err; @@ -1753,8 +1757,6 @@ int xe_bo_pin(struct xe_bo *bo) */ if (IS_DGFX(xe) && !(IS_ENABLED(CONFIG_DRM_XE_DEBUG) && bo->flags & XE_BO_FLAG_INTERNAL_TEST)) { - struct ttm_place *place = &(bo->placements[0]); - if (mem_type_is_vram(place->mem_type)) { xe_assert(xe, place->flags & TTM_PL_FLAG_CONTIGUOUS); @@ -1762,13 +1764,12 @@ int xe_bo_pin(struct xe_bo *bo) vram_region_gpu_offset(bo->ttm.resource)) >> PAGE_SHIFT; place->lpfn = place->fpfn + (bo->size >> PAGE_SHIFT); } + } - if (mem_type_is_vram(place->mem_type) || - bo->flags & XE_BO_FLAG_GGTT) { - spin_lock(&xe->pinned.lock); - list_add_tail(&bo->pinned_link, &xe->pinned.kernel_bo_present); - spin_unlock(&xe->pinned.lock); - } + if (mem_type_is_vram(place->mem_type) || bo->flags & XE_BO_FLAG_GGTT) { + spin_lock(&xe->pinned.lock); + list_add_tail(&bo->pinned_link, &xe->pinned.kernel_bo_present); + spin_unlock(&xe->pinned.lock); } ttm_bo_pin(&bo->ttm); @@ -1816,24 +1817,18 @@ void xe_bo_unpin_external(struct xe_bo *bo) void xe_bo_unpin(struct xe_bo *bo) { + struct ttm_place *place = &bo->placements[0]; struct xe_device *xe = xe_bo_device(bo); xe_assert(xe, !bo->ttm.base.import_attach); xe_assert(xe, xe_bo_is_pinned(bo)); - if (IS_DGFX(xe) && !(IS_ENABLED(CONFIG_DRM_XE_DEBUG) && - bo->flags & XE_BO_FLAG_INTERNAL_TEST)) { - struct ttm_place *place = &(bo->placements[0]); - - if (mem_type_is_vram(place->mem_type) || - bo->flags & XE_BO_FLAG_GGTT) { - spin_lock(&xe->pinned.lock); - xe_assert(xe, !list_empty(&bo->pinned_link)); - list_del_init(&bo->pinned_link); - spin_unlock(&xe->pinned.lock); - } + if (mem_type_is_vram(place->mem_type) || bo->flags & XE_BO_FLAG_GGTT) { + spin_lock(&xe->pinned.lock); + xe_assert(xe, !list_empty(&bo->pinned_link)); + list_del_init(&bo->pinned_link); + spin_unlock(&xe->pinned.lock); } - ttm_bo_unpin(&bo->ttm); } diff --git a/drivers/gpu/drm/xe/xe_bo_evict.c b/drivers/gpu/drm/xe/xe_bo_evict.c index 32043e1e5a86..b01bc20eb90b 100644 --- a/drivers/gpu/drm/xe/xe_bo_evict.c +++ b/drivers/gpu/drm/xe/xe_bo_evict.c @@ -34,9 +34,6 @@ int xe_bo_evict_all(struct xe_device *xe) u8 id; int ret; - if (!IS_DGFX(xe)) - return 0; - /* User memory */ for (mem_type = XE_PL_VRAM0; mem_type <= XE_PL_VRAM1; ++mem_type) { struct ttm_resource_manager *man = @@ -125,9 +122,6 @@ int xe_bo_restore_kernel(struct xe_device *xe) struct xe_bo *bo; int ret; - if (!IS_DGFX(xe)) - return 0; - spin_lock(&xe->pinned.lock); for (;;) { bo = list_first_entry_or_null(&xe->pinned.evicted,

1 month, 3 weeks

3
2
0 0

[PATCH v2] ACPI: platform-profile: Fix CFI violation when accessing sysfs files

by Nathan Chancellor

When an attribute group is created with sysfs_create_group(), the ->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show() and ->store() callbacks to kobj_attr_show() and kobj_attr_store() respectively. These functions use container_of() to get the respective callback from the passed attribute, meaning that these callbacks need to be the same type as the callbacks in 'struct kobj_attribute'. However, the platform_profile sysfs functions have the type of the ->show() and ->store() callbacks in 'struct device_attribute', which results a CFI violation when accessing platform_profile or platform_profile_choices under /sys/firmware/acpi because the types do not match: CFI failure at kobj_attr_show+0x19/0x30 (target: platform_profile_choices_show+0x0/0x140; expected type: 0x7a69590c) There is no functional issue from the type mismatch because the layout of 'struct kobj_attribute' and 'struct device_attribute' are the same, so the container_of() cast does not break anything aside from CFI. Change the type of platform_profile_choices_show() and platform_profile_{show,store}() to match the callbacks in 'struct kobj_attribute' and update the attribute variables to match, which resolves the CFI violation. Cc: stable(a)vger.kernel.org Fixes: a2ff95e018f1 ("ACPI: platform: Add platform profile support") Reported-by: John Rowley <lkml(a)johnrowley.me> Closes: https://github.com/ClangBuiltLinux/linux/issues/2047 Tested-by: John Rowley <lkml(a)johnrowley.me> Reviewed-by: Sami Tolvanen <samitolvanen(a)google.com> Signed-off-by: Nathan Chancellor <nathan(a)kernel.org> --- John reminded me that this is still an issue in 6.12: https://github.com/ClangBuiltLinux/linux/issues/2047#issuecomment-2482635093 I know Greg said this driver should be using a 'struct device' but I am not familiar with that conversion and there was never any follow up to me asking how it should be done. I think it would be best to pick this change up now and have that conversion be done properly by someone who is more familiar with this driver later. Changes in v2: - Rebase on linux-pm/acpi - Pick up Sami's reviewed-by tag - Adjust wording around why there is no functional issue from the mismatched types - Link to v1: https://lore.kernel.org/r/20240819-acpi-platform_profile-fix-cfi-violation-… --- drivers/acpi/platform_profile.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/platform_profile.c b/drivers/acpi/platform_profile.c index d2f7fd7743a13df1dac3100c885208f4418218a5..11278f785526d48243e16659cd78d0b717846a7f 100644 --- a/drivers/acpi/platform_profile.c +++ b/drivers/acpi/platform_profile.c @@ -22,8 +22,8 @@ static const char * const profile_names[] = { }; static_assert(ARRAY_SIZE(profile_names) == PLATFORM_PROFILE_LAST); -static ssize_t platform_profile_choices_show(struct device *dev, - struct device_attribute *attr, +static ssize_t platform_profile_choices_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { int len = 0; @@ -49,8 +49,8 @@ static ssize_t platform_profile_choices_show(struct device *dev, return len; } -static ssize_t platform_profile_show(struct device *dev, - struct device_attribute *attr, +static ssize_t platform_profile_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { enum platform_profile_option profile = PLATFORM_PROFILE_BALANCED; @@ -77,8 +77,8 @@ static ssize_t platform_profile_show(struct device *dev, return sysfs_emit(buf, "%s\n", profile_names[profile]); } -static ssize_t platform_profile_store(struct device *dev, - struct device_attribute *attr, +static ssize_t platform_profile_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t count) { int err, i; @@ -115,12 +115,12 @@ static ssize_t platform_profile_store(struct device *dev, return count; } -static DEVICE_ATTR_RO(platform_profile_choices); -static DEVICE_ATTR_RW(platform_profile); +static struct kobj_attribute attr_platform_profile_choices = __ATTR_RO(platform_profile_choices); +static struct kobj_attribute attr_platform_profile = __ATTR_RW(platform_profile); static struct attribute *platform_profile_attrs[] = { - &dev_attr_platform_profile_choices.attr, - &dev_attr_platform_profile.attr, + &attr_platform_profile_choices.attr, + &attr_platform_profile.attr, NULL }; --- base-commit: d47a60e487fbb65bbbca3d99e59009f0a4acf34d change-id: 20240819-acpi-platform_profile-fix-cfi-violation-de278753bd5f Best regards, -- Nathan Chancellor <nathan(a)kernel.org>

1 month, 3 weeks

1
0
0 0

[PATCH] Revert "drm/amd/pm: correct the workload setting"

by Alex Deucher

This reverts commit 4a18810d0b6fb2b853b75d21117040a783f2ab66. This causes a regression in the workload selection. A more extensive fix is being worked on for mainline. For stable, revert. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618 Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org # 6.11.x --- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 49 ++++++------------- drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 4 +- .../gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c | 5 +- .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 5 +- .../amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 5 +- .../gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 4 +- .../gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c | 4 +- .../drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 20 ++------ .../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 5 +- .../drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 9 ++-- drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c | 8 --- drivers/gpu/drm/amd/pm/swsmu/smu_cmn.h | 2 - 12 files changed, 36 insertions(+), 84 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index ee1bcfaae3e3..80e60ea2d11e 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -1259,33 +1259,26 @@ static int smu_sw_init(void *handle) smu->watermarks_bitmap = 0; smu->power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; smu->default_power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; - smu->user_dpm_profile.user_workload_mask = 0; atomic_set(&smu->smu_power.power_gate.vcn_gated, 1); atomic_set(&smu->smu_power.power_gate.jpeg_gated, 1); atomic_set(&smu->smu_power.power_gate.vpe_gated, 1); atomic_set(&smu->smu_power.power_gate.umsch_mm_gated, 1); - smu->workload_priority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT] = 0; - smu->workload_priority[PP_SMC_POWER_PROFILE_FULLSCREEN3D] = 1; - smu->workload_priority[PP_SMC_POWER_PROFILE_POWERSAVING] = 2; - smu->workload_priority[PP_SMC_POWER_PROFILE_VIDEO] = 3; - smu->workload_priority[PP_SMC_POWER_PROFILE_VR] = 4; - smu->workload_priority[PP_SMC_POWER_PROFILE_COMPUTE] = 5; - smu->workload_priority[PP_SMC_POWER_PROFILE_CUSTOM] = 6; + smu->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT] = 0; + smu->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D] = 1; + smu->workload_prority[PP_SMC_POWER_PROFILE_POWERSAVING] = 2; + smu->workload_prority[PP_SMC_POWER_PROFILE_VIDEO] = 3; + smu->workload_prority[PP_SMC_POWER_PROFILE_VR] = 4; + smu->workload_prority[PP_SMC_POWER_PROFILE_COMPUTE] = 5; + smu->workload_prority[PP_SMC_POWER_PROFILE_CUSTOM] = 6; if (smu->is_apu || - !smu_is_workload_profile_available(smu, PP_SMC_POWER_PROFILE_FULLSCREEN3D)) { - smu->driver_workload_mask = - 1 << smu->workload_priority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT]; - } else { - smu->driver_workload_mask = - 1 << smu->workload_priority[PP_SMC_POWER_PROFILE_FULLSCREEN3D]; - smu->default_power_profile_mode = PP_SMC_POWER_PROFILE_FULLSCREEN3D; - } + !smu_is_workload_profile_available(smu, PP_SMC_POWER_PROFILE_FULLSCREEN3D)) + smu->workload_mask = 1 << smu->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT]; + else + smu->workload_mask = 1 << smu->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D]; - smu->workload_mask = smu->driver_workload_mask | - smu->user_dpm_profile.user_workload_mask; smu->workload_setting[0] = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; smu->workload_setting[1] = PP_SMC_POWER_PROFILE_FULLSCREEN3D; smu->workload_setting[2] = PP_SMC_POWER_PROFILE_POWERSAVING; @@ -2355,20 +2348,17 @@ static int smu_switch_power_profile(void *handle, return -EINVAL; if (!en) { - smu->driver_workload_mask &= ~(1 << smu->workload_priority[type]); + smu->workload_mask &= ~(1 << smu->workload_prority[type]); index = fls(smu->workload_mask); index = index > 0 && index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; workload[0] = smu->workload_setting[index]; } else { - smu->driver_workload_mask |= (1 << smu->workload_priority[type]); + smu->workload_mask |= (1 << smu->workload_prority[type]); index = fls(smu->workload_mask); index = index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; workload[0] = smu->workload_setting[index]; } - smu->workload_mask = smu->driver_workload_mask | - smu->user_dpm_profile.user_workload_mask; - if (smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_MANUAL && smu_dpm_ctx->dpm_level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM) smu_bump_power_profile_mode(smu, workload, 0); @@ -3059,23 +3049,12 @@ static int smu_set_power_profile_mode(void *handle, uint32_t param_size) { struct smu_context *smu = handle; - int ret; if (!smu->pm_enabled || !smu->adev->pm.dpm_enabled || !smu->ppt_funcs->set_power_profile_mode) return -EOPNOTSUPP; - if (smu->user_dpm_profile.user_workload_mask & - (1 << smu->workload_priority[param[param_size]])) - return 0; - - smu->user_dpm_profile.user_workload_mask = - (1 << smu->workload_priority[param[param_size]]); - smu->workload_mask = smu->user_dpm_profile.user_workload_mask | - smu->driver_workload_mask; - ret = smu_bump_power_profile_mode(smu, param, param_size); - - return ret; + return smu_bump_power_profile_mode(smu, param, param_size); } static int smu_get_fan_control_mode(void *handle, u32 *fan_mode) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h index d60d9a12a47e..b44a185d07e8 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h @@ -240,7 +240,6 @@ struct smu_user_dpm_profile { /* user clock state information */ uint32_t clk_mask[SMU_CLK_COUNT]; uint32_t clk_dependency; - uint32_t user_workload_mask; }; #define SMU_TABLE_INIT(tables, table_id, s, a, d) \ @@ -558,8 +557,7 @@ struct smu_context { bool disable_uclk_switch; uint32_t workload_mask; - uint32_t driver_workload_mask; - uint32_t workload_priority[WORKLOAD_POLICY_MAX]; + uint32_t workload_prority[WORKLOAD_POLICY_MAX]; uint32_t workload_setting[WORKLOAD_POLICY_MAX]; uint32_t power_profile_mode; uint32_t default_power_profile_mode; diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c index 31fe512028f4..c0f6b59369b7 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c @@ -1455,6 +1455,7 @@ static int arcturus_set_power_profile_mode(struct smu_context *smu, return -EINVAL; } + if ((profile_mode == PP_SMC_POWER_PROFILE_CUSTOM) && (smu->smc_fw_version >= 0x360d00)) { if (size != 10) @@ -1522,14 +1523,14 @@ static int arcturus_set_power_profile_mode(struct smu_context *smu, ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, + 1 << workload_type, NULL); if (ret) { dev_err(smu->adev->dev, "Fail to set workload type %d\n", workload_type); return ret; } - smu_cmn_assign_power_profile(smu); + smu->power_profile_mode = profile_mode; return 0; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index bb4ae529ae20..076620fa3ef5 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -2081,13 +2081,10 @@ static int navi10_set_power_profile_mode(struct smu_context *smu, long *input, u smu->power_profile_mode); if (workload_type < 0) return -EINVAL; - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, NULL); + 1 << workload_type, NULL); if (ret) dev_err(smu->adev->dev, "[%s] Failed to set work load mask!", __func__); - else - smu_cmn_assign_power_profile(smu); return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index ca94c52663c0..0d3e1a121b67 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -1786,13 +1786,10 @@ static int sienna_cichlid_set_power_profile_mode(struct smu_context *smu, long * smu->power_profile_mode); if (workload_type < 0) return -EINVAL; - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, NULL); + 1 << workload_type, NULL); if (ret) dev_err(smu->adev->dev, "[%s] Failed to set work load mask!", __func__); - else - smu_cmn_assign_power_profile(smu); return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c index 952ee22cbc90..1fe020f1f4db 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c @@ -1079,7 +1079,7 @@ static int vangogh_set_power_profile_mode(struct smu_context *smu, long *input, } ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_ActiveProcessNotify, - smu->workload_mask, + 1 << workload_type, NULL); if (ret) { dev_err_once(smu->adev->dev, "Fail to set workload type %d\n", @@ -1087,7 +1087,7 @@ static int vangogh_set_power_profile_mode(struct smu_context *smu, long *input, return ret; } - smu_cmn_assign_power_profile(smu); + smu->power_profile_mode = profile_mode; return 0; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c index 62316a6707ef..cc0504b063fa 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c @@ -890,14 +890,14 @@ static int renoir_set_power_profile_mode(struct smu_context *smu, long *input, u } ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_ActiveProcessNotify, - smu->workload_mask, + 1 << workload_type, NULL); if (ret) { dev_err_once(smu->adev->dev, "Fail to set workload type %d\n", workload_type); return ret; } - smu_cmn_assign_power_profile(smu); + smu->power_profile_mode = profile_mode; return 0; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c index 5dd7ceca64fe..d53e162dcd8d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c @@ -2485,7 +2485,7 @@ static int smu_v13_0_0_set_power_profile_mode(struct smu_context *smu, DpmActivityMonitorCoeffInt_t *activity_monitor = &(activity_monitor_external.DpmActivityMonitorCoeffInt); int workload_type, ret = 0; - u32 workload_mask; + u32 workload_mask, selected_workload_mask; smu->power_profile_mode = input[size]; @@ -2552,7 +2552,7 @@ static int smu_v13_0_0_set_power_profile_mode(struct smu_context *smu, if (workload_type < 0) return -EINVAL; - workload_mask = 1 << workload_type; + selected_workload_mask = workload_mask = 1 << workload_type; /* Add optimizations for SMU13.0.0/10. Reuse the power saving profile */ if ((amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 0) && @@ -2567,22 +2567,12 @@ static int smu_v13_0_0_set_power_profile_mode(struct smu_context *smu, workload_mask |= 1 << workload_type; } - smu->workload_mask |= workload_mask; ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, + workload_mask, NULL); - if (!ret) { - smu_cmn_assign_power_profile(smu); - if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_POWERSAVING) { - workload_type = smu_cmn_to_asic_specific_index(smu, - CMN2ASIC_MAPPING_WORKLOAD, - PP_SMC_POWER_PROFILE_FULLSCREEN3D); - smu->power_profile_mode = smu->workload_mask & (1 << workload_type) - ? PP_SMC_POWER_PROFILE_FULLSCREEN3D - : PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; - } - } + if (!ret) + smu->workload_mask = selected_workload_mask; return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c index 9d0b19419de0..b891a5e0a396 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c @@ -2499,14 +2499,13 @@ static int smu_v13_0_7_set_power_profile_mode(struct smu_context *smu, long *inp smu->power_profile_mode); if (workload_type < 0) return -EINVAL; - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, NULL); + 1 << workload_type, NULL); if (ret) dev_err(smu->adev->dev, "[%s] Failed to set work load mask!", __func__); else - smu_cmn_assign_power_profile(smu); + smu->workload_mask = (1 << workload_type); return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c index d9f0e7f81ed7..eaf80c5b3e4d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c @@ -1508,11 +1508,12 @@ static int smu_v14_0_2_set_power_profile_mode(struct smu_context *smu, if (workload_type < 0) return -EINVAL; - ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, - smu->workload_mask, NULL); - + ret = smu_cmn_send_smc_msg_with_param(smu, + SMU_MSG_SetWorkloadMask, + 1 << workload_type, + NULL); if (!ret) - smu_cmn_assign_power_profile(smu); + smu->workload_mask = 1 << workload_type; return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c index bdfc5e617333..91ad434bcdae 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.c @@ -1138,14 +1138,6 @@ int smu_cmn_set_mp1_state(struct smu_context *smu, return ret; } -void smu_cmn_assign_power_profile(struct smu_context *smu) -{ - uint32_t index; - index = fls(smu->workload_mask); - index = index > 0 && index <= WORKLOAD_POLICY_MAX ? index - 1 : 0; - smu->power_profile_mode = smu->workload_setting[index]; -} - bool smu_cmn_is_audio_func_enabled(struct amdgpu_device *adev) { struct pci_dev *p = NULL; diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.h b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.h index 8a801e389659..1de685defe85 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.h +++ b/drivers/gpu/drm/amd/pm/swsmu/smu_cmn.h @@ -130,8 +130,6 @@ void smu_cmn_init_soft_gpu_metrics(void *table, uint8_t frev, uint8_t crev); int smu_cmn_set_mp1_state(struct smu_context *smu, enum pp_mp1_state mp1_state); -void smu_cmn_assign_power_profile(struct smu_context *smu); - /* * Helper function to make sysfs_emit_at() happy. Align buf to * the current page boundary and record the offset. -- 2.47.0

1 month, 3 weeks

2
7
0 0

[PATCH v3 00/15] media: stm32: introduction of CSI / DCMIPP for STM32MP25

by Alain Volmat

This series introduces the camera pipeline support for the STM32MP25 SOC. The STM32MP25 has 3 pipelines, fed from a single camera input which can be either parallel or csi. This series adds the basic support for the 1st pipe (dump) which, in term of features is same as the one featured on the STM32MP13 SOC. It focuses on introduction of the CSI input stage for the DCMIPP, and the CSI specific new control code for the DCMIPP. One of the subdev of the DCMIPP, dcmipp_parallel is now renamed as dcmipp_input since it allows to not only control the parallel but also the csi interface. Signed-off-by: Alain Volmat <alain.volmat(a)foss.st.com> --- Changes in v3: * stm32-csi: use clk_bulk api * stm32-csiL perform reset control within the probe - Link to v2: https://lore.kernel.org/r/20241105-csi_dcmipp_mp25-v2-0-b9fc8a7273c2@foss.s… --- Alain Volmat (15): media: stm32: dcmipp: correct dma_set_mask_and_coherent mask value dt-bindings: media: add description of stm32 csi media: stm32: csi: addition of the STM32 CSI driver media: stm32: dcmipp: use v4l2_subdev_is_streaming media: stm32: dcmipp: replace s_stream with enable/disable_streams media: stm32: dcmipp: rename dcmipp_parallel into dcmipp_input media: stm32: dcmipp: add support for csi input into dcmipp-input media: stm32: dcmipp: add bayer 10~14 bits formats media: stm32: dcmipp: add 1X16 RGB / YUV formats support media: stm32: dcmipp: avoid duplicated format on enum in bytecap media: stm32: dcmipp: fill media ctl hw_revision field dt-bindings: media: add the stm32mp25 compatible of DCMIPP media: stm32: dcmipp: add core support for the stm32mp25 arm64: dts: st: add csi & dcmipp node in stm32mp25 arm64: dts: st: enable imx335/csi/dcmipp pipeline on stm32mp257f-ev1 .../devicetree/bindings/media/st,stm32-dcmipp.yaml | 53 +- .../bindings/media/st,stm32mp25-csi.yaml | 125 +++ MAINTAINERS | 8 + arch/arm64/boot/dts/st/stm32mp251.dtsi | 23 + arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 85 ++ drivers/media/platform/st/stm32/Kconfig | 14 + drivers/media/platform/st/stm32/Makefile | 1 + drivers/media/platform/st/stm32/stm32-csi.c | 1137 ++++++++++++++++++++ .../media/platform/st/stm32/stm32-dcmipp/Makefile | 2 +- .../st/stm32/stm32-dcmipp/dcmipp-bytecap.c | 128 ++- .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 119 +- .../platform/st/stm32/stm32-dcmipp/dcmipp-common.h | 4 +- .../platform/st/stm32/stm32-dcmipp/dcmipp-core.c | 116 +- .../platform/st/stm32/stm32-dcmipp/dcmipp-input.c | 540 ++++++++++ .../st/stm32/stm32-dcmipp/dcmipp-parallel.c | 440 -------- 15 files changed, 2219 insertions(+), 576 deletions(-) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20241007-csi_dcmipp_mp25-7779601f57da Best regards, -- Alain Volmat <alain.volmat(a)foss.st.com>

1 month, 3 weeks

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2024