November 2024 - Linux-stable-mirror

S/PDIF not detected anymore / regression on recent kernel 6.7 ?

by Serge SIMON

Dear Kernel maintainers, I think i'm encountering (for the first time in years !) a regression with the "6.7.arch3-1" kernel (whereas no issues with "6.6.10.arch1-1", on which i reverted). I'm running a (up-to-date, and non-LTS) ARCHLINUX desktop, on a ASUS B560-I motherboard, with 3 monitors (attached to a 4-HDMI outputs card), plus an audio S/PDIF optic output at motherboard level. With the latest kernel, the S/PIDF optic output of the motherboard is NOT detected anymore (and i haven't been able to see / find anything in the logs at quick glance, neither journalctl -xe nor dmesg). Once reverted to 6.6.10, everything is fine again. For example, in a working situation (6.6.10), i have : cat /proc/asound/pcm 00-00: ALC1220 Analog : ALC1220 Analog : playback 1 : capture 1 00-01: ALC1220 Digital : ALC1220 Digital : playback 1 00-02: ALC1220 Alt Analog : ALC1220 Alt Analog : capture 1 01-03: HDMI 0 : HDMI 0 : playback 1 01-07: HDMI 1 : HDMI 1 : playback 1 01-08: HDMI 2 : HDMI 2 : playback 1 01-09: HDMI 3 : HDMI 3 : playback 1 Whereas while on the latest 6.7 kernel, i only had the 4 HDMI lines (linked to a NVIDIA T600 card, with 4 HDMI outputs) and not the three first ones (attached to the motherboard). (of course i did several tests with 6.7, reboot, ... without any changes) Any idea ? Best regards -- Serge.

5 days, 21 hours

4
7
0 0

[PATCH v2] ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address

by Nobuhiro Iwamatsu

On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be found and the network device does not work. ``` stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19) ``` To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the mdio bus. Also the PHY address connected to this board is 4. Therefore, change to 4. Cc: stable(a)vger.kernel.org # 6.3+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu(a)nigauri.org> --- v2: Update commit message from 'ID' to 'address'. Drop Fixes tag, because that commit is not the cause. arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts index ce0d6514eeb571..e4794ccb8e413f 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts @@ -66,8 +66,10 @@ &gmac1 { mdio0 { #address-cells = <1>; #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@4 { + reg = <4>; rxd0-skew-ps = <0>; rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; -- 2.45.2

1 month

2
3
0 0

[GIT PULL] USB chipidea patches for linux-5.15.y and linux-6.1.y

by Xu Yang

Hi Greg, The below two patches are needed on linux-5.15.y and linux-6.1.y, please help to add them to the stable tree. b7a62611fab7 usb: chipidea: add USB PHY event 87ed257acb09 usb: phy: mxs: disconnect line when USB charger is attached They are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git branch usb-testing Thanks, Xu Yang

2 months, 1 week

4
5
0 0

linux-6.6.y regression on amd-pstate

by Mario Limonciello

+ stable + regressions New subject Great news. Greg, Sasha, Can you please pull in these 3 commits specifically to 6.6.y to fix a regression that was reported by Morgan in 6.6.y: commit 12753d71e8c5 ("ACPI: CPPC: Add helper to get the highest performance value") commit ed429c686b79 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support") commit 3d291fe47fe1 ("cpufreq: amd-pstate: fix the highest frequency issue which limits performance") Further details are below. Thanks! On 9/5/2024 16:09, Jones, Morgan wrote: > Mario, > > Confirmed. Thank you for the help! Slightly different refs on my end: > > Remotes: > > next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git (fetch) > next https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git (push) > origin git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git (fetch) > origin git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git (push) > superm1 https://git.kernel.org/pub/scm/linux/kernel/git/superm1/linux.git/ (fetch) > superm1 https://git.kernel.org/pub/scm/linux/kernel/git/superm1/linux.git/ (push) > torvalds git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (fetch) > torvalds git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (push) > > Patches: > > git format-patch 12753d71e8c5^..12753d71e8c5 > git format-patch f3a052391822b772b4e27f2594526cf1eb103cab^..f3a052391822b772b4e27f2594526cf1eb103cab > git format-patch bf202e654bfa57fb8cf9d93d4c6855890b70b9c4^..bf202e654bfa57fb8cf9d93d4c6855890b70b9c4 > > Results: > > Linux redact 6.6.48 #1-NixOS SMP PREEMPT_DYNAMIC Tue Jan 1 00:00:00 UTC 1980 x86_64 GNU/Linux > > analyzing CPU 56: > driver: amd-pstate-epp > CPUs which run at the same hardware frequency: 56 > CPUs which need to have their frequency coordinated by software: 56 > maximum transition latency: Cannot determine or is not supported. > hardware limits: 400 MHz - 3.35 GHz > available cpufreq governors: performance powersave > current policy: frequency should be within 400 MHz and 3.35 GHz. > The governor "performance" may decide which speed to use > within this range. > current CPU frequency: Unable to call hardware > current CPU frequency: 2.09 GHz (asserted by call to kernel) > boost state support: > Supported: yes > Active: yes > AMD PSTATE Highest Performance: 255. Maximum Frequency: 3.35 GHz. > AMD PSTATE Nominal Performance: 152. Nominal Frequency: 2.00 GHz. > AMD PSTATE Lowest Non-linear Performance: 115. Lowest Non-linear Frequency: 1.51 GHz. > AMD PSTATE Lowest Performance: 31. Lowest Frequency: 400 MHz. > > And our builds are back to being fast with `amd_pstate=active amd_prefcore=enable amd_pstate.shared_mem=1`. > > Morgan > > -----Original Message----- > From: Mario Limonciello <mario.limonciello(a)amd.com> > Sent: Thursday, September 5, 2024 8:12 AM > To: Jones, Morgan <Morgan.Jones(a)viasat.com> > Cc: linux-pm(a)vger.kernel.org; linux-kernel(a)vger.kernel.org; David Arcari <darcari(a)redhat.com>; Dhananjay Ugwekar <Dhananjay.Ugwekar(a)amd.com>; rafael(a)kernel.org; viresh.kumar(a)linaro.org; gautham.shenoy(a)amd.com; perry.yuan(a)amd.com; skhan(a)linuxfoundation.org; li.meng(a)amd.com; ray.huang(a)amd.com > Subject: Re: [EXTERNAL] Re: [PATCH v2 2/2] cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems > > Hi Morgan, > > Please apply these 3 commits: > > commit 12753d71e8c5 ("ACPI: CPPC: Add helper to get the highest performance value") commit ed429c686b79 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support") commit 3d291fe47fe1 ("cpufreq: amd-pstate: fix the highest frequency issue which limits performance") > > The first two should help your system, the third will prevent introducing a regression on a different one. > > Assuming that works we should ask @stable to pull all 3 in to fix this regression. > > Thanks, > > On 9/4/2024 08:57, Mario Limonciello wrote: >> Morgan, >> >> I was referring specfiically to the version that landed in Linus' tree: >> https://urldefense.us/v3/__https://git.kernel.org/torvalds/c/8164f7433 >> 264__;!!C5Asm8uRnZQmlRln!aIZEDEbIUKD7OrxN0b0KjoqKYDL2yMkwk4EK7x_oSnyHQ >> 6MEq7yt6JHjd0TD9DgEYEWDcF58OKL8c7G11bT3dSqL8eM$ >> >> But yeah it's effectively the same thing. In any case, it's not the >> solution. >> >> We had some internal discussion and suspect this is due to missing >> prefcore patches in 6.6 as that feature landed in 6.9. We'll try to >> reproduce this on a Rome system and come back with our findings and >> suggestions what to do. >> >> Thanks, >> >

2 months, 1 week

4
5
0 0

[PATCH] drm/panthor: Fix memory leak in panthor_ioctl_group_create()

by Jann Horn

When bailing out due to group_priority_permit() failure, the queue_args need to be freed. Fix it by rearranging the function to use the goto-on-error pattern, such that the success case flows straight without indentation while error cases jump forward to cleanup. Cc: stable(a)vger.kernel.org Fixes: 5f7762042f8a ("drm/panthor: Restrict high priorities on group_create") Signed-off-by: Jann Horn <jannh(a)google.com> --- testcase: ``` #include <err.h> #include <fcntl.h> #include <stddef.h> #include <sys/ioctl.h> #include <drm/panthor_drm.h> #define SYSCHK(x) ({ \ typeof(x) __res = (x); \ if (__res == (typeof(x))-1) \ err(1, "SYSCHK(" #x ")"); \ __res; \ }) #define GPU_PATH "/dev/dri/by-path/platform-fb000000.gpu-card" int main(void) { int fd = SYSCHK(open(GPU_PATH, O_RDWR)); while (1) { struct drm_panthor_queue_create qc[16] = {}; struct drm_panthor_group_create gc = { .queues = { .stride = sizeof(struct drm_panthor_queue_create), .count = 16, .array = (unsigned long)qc }, .priority = PANTHOR_GROUP_PRIORITY_HIGH+1/*invalid*/ }; ioctl(fd, DRM_IOCTL_PANTHOR_GROUP_CREATE, &gc); } } ``` I have tested that without this patch, after running the testcase for a few seconds and then manually killing it, 2G of RAM in kmalloc-128 have been leaked. With the patch applied, the memory leak is gone. (By the way, get_maintainer.pl suggests that I also send this patch to the general DRM maintainers and the DRM-misc maintainers; looking at MAINTAINERS, it looks like it is normal that the general DRM maintainers are listed for everything under drivers/gpu/, but DRM-misc has exclusion rules for a bunch of drivers but not panthor. I don't know if that is intentional.) --- drivers/gpu/drm/panthor/panthor_drv.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/panthor/panthor_drv.c b/drivers/gpu/drm/panthor/panthor_drv.c index c520f156e2d73f7e735f8bf2d6d8e8efacec9362..815c23cff25f305d884e8e3e263fa22888f7d5ce 100644 --- a/drivers/gpu/drm/panthor/panthor_drv.c +++ b/drivers/gpu/drm/panthor/panthor_drv.c @@ -1032,14 +1032,15 @@ static int panthor_ioctl_group_create(struct drm_device *ddev, void *data, ret = group_priority_permit(file, args->priority); if (ret) - return ret; + goto out; ret = panthor_group_create(pfile, args, queue_args); - if (ret >= 0) { - args->group_handle = ret; - ret = 0; - } + if (ret < 0) + goto out; + args->group_handle = ret; + ret = 0; +out: kvfree(queue_args); return ret; } --- base-commit: 9f8e716d46c68112484a23d1742d9ec725e082fc change-id: 20241113-panthor-fix-gcq-bailout-2d9ac36590ed -- Jann Horn <jannh(a)google.com>

2 months, 3 weeks

4
4
0 0

FAILED: patch "[PATCH] kbuild: rpm-pkg: simplify installkernel %post" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 358de8b4f201bc05712484b15f0109b1ae3516a8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021932-lavish-expel-58e5@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: 358de8b4f201 ("kbuild: rpm-pkg: simplify installkernel %post") 0df8e9708594 ("scripts: clean up IA-64 code") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 358de8b4f201bc05712484b15f0109b1ae3516a8 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Mon, 29 Jan 2024 10:28:19 +0100 Subject: [PATCH] kbuild: rpm-pkg: simplify installkernel %post The new installkernel application that is now included in systemd-udev package allows installation although destination files are already present in the boot directory of the kernel package, but is failing with the implemented workaround for the old installkernel application from grubby package. For the new installkernel application, as Davide says: <<The %post currently does a shuffling dance before calling installkernel. This isn't actually necessary afaict, and the current implementation ends up triggering downstream issues such as https://github.com/systemd/systemd/issues/29568 This commit simplifies the logic to remove the shuffling. For reference, the original logic was added in commit 3c9c7a14b627("rpm-pkg: add %post section to create initramfs and grub hooks").>> But we need to keep the old behavior as well, because the old installkernel application from grubby package, does not allow this simplification and we need to be backward compatible to avoid issues with the different packages. Mimic Fedora shipping process and store vmlinuz, config amd System.map in the module directory instead of the boot directory. In this way, we will avoid the commented problem for all the cases, because the new destination files are not going to exist in the boot directory of the kernel package. Replace installkernel tool with kernel-install tool, because the latter is more complete. Besides, after installkernel tool execution, check to complete if the correct package files vmlinuz, System.map and config files are present in /boot directory, and if necessary, copy manually for install operation. In this way, take into account if files were not previously copied from /usr/lib/kernel/install.d/* scripts and if the suitable files for the requested package are present (it could be others if the rpm files were replace with a new pacakge with the same release and a different build). Tested with Fedora 38, Fedora 39, RHEL 9, Oracle Linux 9.3, openSUSE Tumbleweed and openMandrive ROME, using dnf/zypper and rpm tools. cc: stable(a)vger.kernel.org Co-Developed-by: Davide Cavalca <dcavalca(a)meta.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Signed-off-by: Masahiro Yamada <masahiroy(a)kernel.org> diff --git a/scripts/package/kernel.spec b/scripts/package/kernel.spec index 89298983a169..f58726671fb3 100644 --- a/scripts/package/kernel.spec +++ b/scripts/package/kernel.spec @@ -55,12 +55,12 @@ patch -p1 < %{SOURCE2} %{make} %{makeflags} KERNELRELEASE=%{KERNELRELEASE} KBUILD_BUILD_VERSION=%{release} %install -mkdir -p %{buildroot}/boot -cp $(%{make} %{makeflags} -s image_name) %{buildroot}/boot/vmlinuz-%{KERNELRELEASE} +mkdir -p %{buildroot}/lib/modules/%{KERNELRELEASE} +cp $(%{make} %{makeflags} -s image_name) %{buildroot}/lib/modules/%{KERNELRELEASE}/vmlinuz %{make} %{makeflags} INSTALL_MOD_PATH=%{buildroot} modules_install %{make} %{makeflags} INSTALL_HDR_PATH=%{buildroot}/usr headers_install -cp System.map %{buildroot}/boot/System.map-%{KERNELRELEASE} -cp .config %{buildroot}/boot/config-%{KERNELRELEASE} +cp System.map %{buildroot}/lib/modules/%{KERNELRELEASE} +cp .config %{buildroot}/lib/modules/%{KERNELRELEASE}/config ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEASE}/build %if %{with_devel} %{make} %{makeflags} run-command KBUILD_RUN_COMMAND='${srctree}/scripts/package/install-extmod-build %{buildroot}/usr/src/kernels/%{KERNELRELEASE}' @@ -70,13 +70,14 @@ ln -fns /usr/src/kernels/%{KERNELRELEASE} %{buildroot}/lib/modules/%{KERNELRELEA rm -rf %{buildroot} %post -if [ -x /sbin/installkernel -a -r /boot/vmlinuz-%{KERNELRELEASE} -a -r /boot/System.map-%{KERNELRELEASE} ]; then -cp /boot/vmlinuz-%{KERNELRELEASE} /boot/.vmlinuz-%{KERNELRELEASE}-rpm -cp /boot/System.map-%{KERNELRELEASE} /boot/.System.map-%{KERNELRELEASE}-rpm -rm -f /boot/vmlinuz-%{KERNELRELEASE} /boot/System.map-%{KERNELRELEASE} -/sbin/installkernel %{KERNELRELEASE} /boot/.vmlinuz-%{KERNELRELEASE}-rpm /boot/.System.map-%{KERNELRELEASE}-rpm -rm -f /boot/.vmlinuz-%{KERNELRELEASE}-rpm /boot/.System.map-%{KERNELRELEASE}-rpm +if [ -x /usr/bin/kernel-install ]; then + /usr/bin/kernel-install add %{KERNELRELEASE} /lib/modules/%{KERNELRELEASE}/vmlinuz fi +for file in vmlinuz System.map config; do + if ! cmp --silent "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}"; then + cp "/lib/modules/%{KERNELRELEASE}/${file}" "/boot/${file}-%{KERNELRELEASE}" + fi +done %preun if [ -x /sbin/new-kernel-pkg ]; then @@ -94,7 +95,6 @@ fi %defattr (-, root, root) /lib/modules/%{KERNELRELEASE} %exclude /lib/modules/%{KERNELRELEASE}/build -/boot/* %files headers %defattr (-, root, root)

3 months, 2 weeks

5
8
0 0

[PATCH 0/1] disable __counted_by for clang < 19.1.3

by Jan Hendrik Farr

Hi Kees, Bill's PR to disable __counted_by for "whole struct" __bdos cases has now been merged into 19.1.3 [1], so here's the patch to disable __counted_by for clang versions < 19.1.3 in the kernel. Hopefully in the near future __counted_by for whole struct __bdos can be enabled once again in coordination between the kernel, gcc, and clang. There has been recent progress on this in [2] thanks to Tavian. Also see previous discussion on the mailing list [3] Thanks to everyone for moving this issue along. In particular, Bill for his PR to clang/llvm, Kees and Thorsten for reproducers of the two issues, Nathan for Kconfig-ifying this patch, and Miguel for reviewing. Info for the stable team: This patch should be backported to kernels >= 6.6 to make sure that those build correctly with the effected clang versions. This patch cherry-picks cleanly onto linux-6.11.y. For linux-6.6.y three prerequiste commits are neded: 16c31dd7fdf6: Compiler Attributes: counted_by: bump min gcc version 2993eb7a8d34: Compiler Attributes: counted_by: fixup clang URL 231dc3f0c936: lkdtm/bugs: Improve warning message for compilers without counted_by support There are still two merge conflicts even with those prerequistes. Here's the correct resolution: 1. include/linux/compiler_types.h: use the incoming change until before (but not including) the "Apply __counted_by() when the Endianness matches to increase test coverage." comment 2. lib/overflow_kunit.c: HEAD is correct [1] https://github.com/llvm/llvm-project/pull/112786 [2] https://github.com/llvm/llvm-project/pull/112636 [3] https://lore.kernel.org/lkml/3E304FB2-799D-478F-889A-CDFC1A52DCD8@toblux.co… Best Regards Jan Jan Hendrik Farr (1): Compiler Attributes: disable __counted_by for clang < 19.1.3 drivers/misc/lkdtm/bugs.c | 2 +- include/linux/compiler_attributes.h | 13 ------------- include/linux/compiler_types.h | 19 +++++++++++++++++++ init/Kconfig | 9 +++++++++ lib/overflow_kunit.c | 2 +- 5 files changed, 30 insertions(+), 15 deletions(-) -- 2.47.0

4 months

6
7
0 0

FAILED: patch "[PATCH] arm64/sme: Always exit sme_alloc() early with existing" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012617-overlap-reborn-e124@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: dc7eb8755797 ("arm64/sme: Always exit sme_alloc() early with existing storage") 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state") f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support") ce514000da4f ("arm64/sme: Rename za_state to sme_state") 1192b93ba352 ("arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu()") deeb8f9a80fd ("arm64/fpsimd: Have KVM explicitly say which FP registers to save") baa8515281b3 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE") 93ae6b01bafe ("KVM: arm64: Discard any SVE state when entering KVM guests") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From dc7eb8755797ed41a0d1b5c0c39df3c8f401b3d9 Mon Sep 17 00:00:00 2001 From: Mark Brown <broonie(a)kernel.org> Date: Mon, 15 Jan 2024 20:15:46 +0000 Subject: [PATCH] arm64/sme: Always exit sme_alloc() early with existing storage When sme_alloc() is called with existing storage and we are not flushing we will always allocate new storage, both leaking the existing storage and corrupting the state. Fix this by separating the checks for flushing and for existing storage as we do for SVE. Callers that reallocate (eg, due to changing the vector length) should call sme_free() themselves. Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state") Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel… Signed-off-by: Will Deacon <will(a)kernel.org> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 0983be2b1b61..a5dc6f764195 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -1217,8 +1217,10 @@ void fpsimd_release_task(struct task_struct *dead_task) */ void sme_alloc(struct task_struct *task, bool flush) { - if (task->thread.sme_state && flush) { - memset(task->thread.sme_state, 0, sme_state_size(task)); + if (task->thread.sme_state) { + if (flush) + memset(task->thread.sme_state, 0, + sme_state_size(task)); return; }

4 months, 4 weeks

3
2
0 0

[REGRESSION][BISECTED] Commit 60e3318e3e900 in stable/linux-6.1.y breaks cifs client failover to another server in DFS namespace

by Andrew Paniakin

Commit 60e3318e3e900 ("cifs: use fs_context for automounts") was released in v6.1.54 and broke the failover when one of the servers inside DFS becomes unavailable. We reproduced the problem on the EC2 instances of different types. Reverting aforementioned commint on top of the latest stable verison v6.1.94 helps to resolve the problem. Earliest working version is v6.2-rc1. There were two big merges of CIFS fixes: [1] and [2]. We would like to ask for the help to investigate this problem and if some of those patches need to be backported. Also, is it safe to just revert problematic commit until proper fixes/backports will be available? We will help to do testing and confirm if fix works, but let me also list the steps we used to reproduce the problem if it will help to identify the problem: 1. Create Active Directory domain eg. 'corp.fsxtest.local' in AWS Directory Service with: - three AWS FSX file systems filesystem1..filesystem3 - three Windows servers; They have DFS installed as per https://learn.microsoft.com/en-us/windows-server/storage/dfs-namespaces/dfs…: - dfs-srv1: EC2AMAZ-2EGTM59 - dfs-srv2: EC2AMAZ-1N36PRD - dfs-srv3: EC2AMAZ-0PAUH2U 2. Create DFS namespace eg. 'dfs-namespace' in Windows server 2008 mode and three folders targets in it: - referral-a mapped to filesystem1.corp.local - referral-b mapped to filesystem2.corp.local - referral-c mapped to filesystem3.corp.local - local folders dfs-srv1..dfs-srv3 in C:\DFSRoots\dfs-namespace of every Windows server. This helps to quickly define underlying server when DFS is mounted. 3. Enabled cifs debug logs: ``` echo 'module cifs +p' > /sys/kernel/debug/dynamic_debug/control echo 'file fs/cifs/* +p' > /sys/kernel/debug/dynamic_debug/control echo 7 > /proc/fs/cifs/cifsFYI ``` 4. Mount DFS namespace on Amazon Linux 2023 instance running any vanilla kernel v6.1.54+: ``` dmesg -c &>/dev/null cd /mnt mount -t cifs -o cred=/mnt/creds,echo_interval=5 \ //corp.fsxtest.local/dfs-namespace \ ./dfs-namespace ``` 5. List DFS root, it's also required to avoid recursive mounts that happen during regular 'ls' run: ``` sh -c 'ls dfs-namespace' dfs-srv2 referral-a referral-b ``` The DFS server is EC2AMAZ-1N36PRD, it's also listed in mount: ``` [root@ip-172-31-2-82 mnt]# mount | grep dfs //corp.fsxtest.local/dfs-namespace on /mnt/dfs-namespace type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.11.26,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) //EC2AMAZ-1N36PRD.corp.fsxtest.local/dfs-namespace/referral-a on /mnt/dfs-namespace/referral-a type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.12.80,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) ``` List files in first folder: ``` sh -c 'ls dfs-namespace/referral-a' filea.txt.txt ``` 6. Shutdown DFS server-2. List DFS root again, server changed from dfs-srv2 to dfs-srv1 EC2AMAZ-2EGTM59: ``` sh -c 'ls dfs-namespace' dfs-srv1 referral-a referral-b ``` 7. Try to list files in another folder, this causes ls to fail with error: ``` sh -c 'ls dfs-namespace/referral-b' ls: cannot access 'dfs-namespace/referral-b': No route to host``` Sometimes it's also 'Operation now in progress' error. mount shows the same output: ``` //corp.fsxtest.local/dfs-namespace on /mnt/dfs-namespace type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.11.26,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) //EC2AMAZ-1N36PRD.corp.fsxtest.local/dfs-namespace/referral-a on /mnt/dfs-namespace/referral-a type cifs (rw,relatime,vers=3.1.1,cache=strict,username=Admin,domain=corp.fsxtest.local,uid=0,noforceuid,gid=0,noforcegid,addr=172.31.12.80,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=5,actimeo=1,closetimeo=1) ``` I also attached kernel debug logs from this test. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Reported-by: Andrei Paniakin <apanyaki(a)amazon.com> Bisected-by: Simba Bonga <simbarb(a)amazon.com> --- #regzbot introduced: v6.1.54..v6.2-rc1

5 months

3
12
0 0

[PATCH] hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key

by Vasiliy Kovalev

Syzbot reported an issue in hfs subsystem: BUG: KASAN: slab-out-of-bounds in memcpy_from_page include/linux/highmem.h:423 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read fs/hfs/bnode.c:35 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 Write of size 94 at addr ffff8880123cd100 by task syz-executor237/5102 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 memcpy_from_page include/linux/highmem.h:423 [inline] hfs_bnode_read fs/hfs/bnode.c:35 [inline] hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 hfs_brec_insert+0x7f3/0xbd0 fs/hfs/brec.c:159 hfs_cat_create+0x41d/0xa50 fs/hfs/catalog.c:118 hfs_mkdir+0x6c/0xe0 fs/hfs/dir.c:232 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdir fs/namei.c:4300 [inline] __se_sys_mkdir fs/namei.c:4298 [inline] __x64_sys_mkdir+0x6c/0x80 fs/namei.c:4298 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbdd6057a99 Add a check for key length in hfs_bnode_read_key to prevent out-of-bounds memory access. If the key length is invalid, the key buffer is cleared, improving stability and reliability. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5f3a973ed3dfb85a6683(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5f3a973ed3dfb85a6683 Cc: stable(a)vger.kernel.org Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- fs/hfs/bnode.c | 6 ++++++ fs/hfsplus/bnode.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index 6add6ebfef8967..cb823a8a6ba960 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 1; + if (key_len > sizeof(hfs_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfs_btree_key)); + pr_err("hfs: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c index 87974d5e679156..079ea80534f7de 100644 --- a/fs/hfsplus/bnode.c +++ b/fs/hfsplus/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 2; + if (key_len > sizeof(hfsplus_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfsplus_btree_key)); + pr_err("hfsplus: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } -- 2.33.8

5 months, 3 weeks

10
19
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2024