October 2024 - Linux-stable-mirror

[PATCH] usb: musb: sunxi: Fix accessing an released usb phy

by Zijun Hu

From: Zijun Hu <quic_zijuhu(a)quicinc.com> Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") Cc: stable(a)vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu(a)quicinc.com> --- drivers/usb/musb/sunxi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d54283fd026b..05b6e7e52e02 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -293,8 +293,6 @@ static int sunxi_musb_exit(struct musb *musb) if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); - devm_usb_put_phy(glue->dev, glue->xceiv); - return 0; } --- base-commit: afb92ad8733ef0a2843cc229e4d96aead80bc429 change-id: 20241029-sunxi_fix-07fe18228733 Best regards, -- Zijun Hu <quic_zijuhu(a)quicinc.com>

1 month, 4 weeks

1
0
0 0

[PATCH] vmscan,migrate: fix double-decrement on node stats when demoting pages

by Gregory Price

When numa balancing is enabled with demotion, vmscan will call migrate_pages when shrinking LRUs. Successful demotions will cause node vmstat numbers to double-decrement, leading to an imbalanced page count. The result is dmesg output like such: $ cat /proc/sys/vm/stat_refresh [77383.088417] vmstat_refresh: nr_isolated_anon -103212 [77383.088417] vmstat_refresh: nr_isolated_file -899642 This negative value may impact compaction and reclaim throttling. The double-decrement occurs in the migrate_pages path: caller to shrink_folio_list decrements the count shrink_folio_list demote_folio_list migrate_pages migrate_pages_batch migrate_folio_move migrate_folio_done mod_node_page_state(-ve) <- second decrement This path happens for SUCCESSFUL migrations, not failures. Typically callers to migrate_pages are required to handle putback/accounting for failures, but this is already handled in the shrink code. When accounting for migrations, instead do not decrement the count when the migration reason is MR_DEMOTION. As of v6.11, this demotion logic is the only source of MR_DEMOTION. Signed-off-by: Gregory Price <gourry(a)gourry.net> Fixes: 26aa2d199d6f2 ("mm/migrate: demote pages during reclaim") Cc: stable(a)vger.kernel.org --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 923ea80ba744..e3aac274cf16 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1099,7 +1099,7 @@ static void migrate_folio_done(struct folio *src, * not accounted to NR_ISOLATED_*. They can be recognized * as __folio_test_movable */ - if (likely(!__folio_test_movable(src))) + if (likely(!__folio_test_movable(src)) && reason != MR_DEMOTION) mod_node_page_state(folio_pgdat(src), NR_ISOLATED_ANON + folio_is_file_lru(src), -folio_nr_pages(src)); -- 2.43.0

1 month, 4 weeks

6
10
0 0

[PATCH 5.10/5.15/6.1 0/1] wifi: ath10k: Check return value of ath10k_get_arvif() in ath10k_wmi_event_tdls_peer()

by Dmitry Kandybka

SVACE reports a potential NULL pointer dereference in 5.10, 5.15 and 6.1 stable releases since the commit 4c9f8d114660 ("ath10k: enable TDLS peer inactivity detection") that caused this report was appeared. The problem has been fixed by the following upstream patch that was adapted to 5.10, 5.15 and 6.1. All of the changes made to the patch in order to adapt it are described at the end of commit message. Found by Linux Verification Center (linuxtesting.org) with SVACE. Peter Kosyh (1): wifi: ath10k: Check return value of ath10k_get_arvif() in ath10k_wmi_event_tdls_peer() drivers/net/wireless/ath/ath10k/wmi-tlv.c | 7 +++++++ 1 file changed, 7 insertions(+) -- 2.43.5

1 month, 4 weeks

1
1
0 0

[PATCH v4 1/3] drm/xe: Move LNL scheduling WA to xe_device.h

by Nirmoy Das

Move LNL scheduling WA to xe_device.h so this can be used in other places without needing keep the same comment about removal of this WA in the future. The WA, which flushes work or workqueues, is now wrapped in macros and can be reused wherever needed. Cc: Badal Nilawar <badal.nilawar(a)intel.com> Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> cc: <stable(a)vger.kernel.org> # v6.11+ Suggested-by: John Harrison <John.C.Harrison(a)Intel.com> Signed-off-by: Nirmoy Das <nirmoy.das(a)intel.com> --- drivers/gpu/drm/xe/xe_device.h | 14 ++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.c | 11 +---------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_device.h b/drivers/gpu/drm/xe/xe_device.h index 4c3f0ebe78a9..f1fbfe916867 100644 --- a/drivers/gpu/drm/xe/xe_device.h +++ b/drivers/gpu/drm/xe/xe_device.h @@ -191,4 +191,18 @@ void xe_device_declare_wedged(struct xe_device *xe); struct xe_file *xe_file_get(struct xe_file *xef); void xe_file_put(struct xe_file *xef); +/* + * Occasionally it is seen that the G2H worker starts running after a delay of more than + * a second even after being queued and activated by the Linux workqueue subsystem. This + * leads to G2H timeout error. The root cause of issue lies with scheduling latency of + * Lunarlake Hybrid CPU. Issue disappears if we disable Lunarlake atom cores from BIOS + * and this is beyond xe kmd. + * + * TODO: Drop this change once workqueue scheduling delay issue is fixed on LNL Hybrid CPU. + */ +#define LNL_FLUSH_WORKQUEUE(wq__) \ + flush_workqueue(wq__) +#define LNL_FLUSH_WORK(wrk__) \ + flush_work(wrk__) + #endif diff --git a/drivers/gpu/drm/xe/xe_guc_ct.c b/drivers/gpu/drm/xe/xe_guc_ct.c index 1b5d8fb1033a..703b44b257a7 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct.c +++ b/drivers/gpu/drm/xe/xe_guc_ct.c @@ -1018,17 +1018,8 @@ static int guc_ct_send_recv(struct xe_guc_ct *ct, const u32 *action, u32 len, ret = wait_event_timeout(ct->g2h_fence_wq, g2h_fence.done, HZ); - /* - * Occasionally it is seen that the G2H worker starts running after a delay of more than - * a second even after being queued and activated by the Linux workqueue subsystem. This - * leads to G2H timeout error. The root cause of issue lies with scheduling latency of - * Lunarlake Hybrid CPU. Issue dissappears if we disable Lunarlake atom cores from BIOS - * and this is beyond xe kmd. - * - * TODO: Drop this change once workqueue scheduling delay issue is fixed on LNL Hybrid CPU. - */ if (!ret) { - flush_work(&ct->g2h_worker); + LNL_FLUSH_WORK(&ct->g2h_worker); if (g2h_fence.done) { xe_gt_warn(gt, "G2H fence %u, action %04x, done\n", g2h_fence.seqno, action[0]); -- 2.46.0

1 month, 4 weeks

2
4
0 0

[PATCH] firewire: core: fix invalid port index for parent device

by Takashi Sakamoto

In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence"), the enumeration over self ID sequence was refactored with some helper functions with KUnit tests. These helper functions are guaranteed to work expectedly by the KUnit tests, however their application includes a mistake to assign invalid value to the index of port connected to parent device. This bug affects the case that any extra node devices which has three or more ports are connected to 1394 OHCI controller. In the case, the path to update the tree cache could hits WARN_ON(), and gets general protection fault due to the access to invalid address computed by the invalid value. This commit fixes the bug to assign correct port index. Cc: stable(a)vger.kernel.org Reported-by: Edmund Raile <edmund.raile(a)proton.me> Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel… Fixes: 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence") Signed-off-by: Takashi Sakamoto <o-takashi(a)sakamocchi.jp> --- drivers/firewire/core-topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 6adadb11962e..892b94cfd626 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -204,7 +204,7 @@ static struct fw_node *build_tree(struct fw_card *card, const u32 *sid, int self // the node->ports array where the parent node should be. Later, // when we handle the parent node, we fix up the reference. ++parent_count; - node->color = i; + node->color = port_index; break; case PHY_PACKET_SELF_ID_PORT_STATUS_CHILD: -- 2.45.2

1 month, 4 weeks

2
2
0 0

[RFC PATCH 6.1.y 0/1] cpufreq: amd-pstate: Enable CPU boost in passive and guided modes

by Nabil S. Alramli

Greetings, This is a RFC for a maintenance patch to an issue in the amd_pstate driver where CPU frequency cannot be boosted in passive or guided modes. Without this patch, AMD machines using stable kernels are unable to get their CPU frequency boosted, which is a significant performance issue. For example, on a host that has AMD EPYC 7662 64-Core processor without this patch running at full CPU load: $ for i in $(cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq); \ do ni=$(echo "scale=1; $i/1000000" | bc -l); echo "$ni GHz"; done | \ sort | uniq -c 128 2.0 GHz And with this patch: $ for i in $(cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq); \ do ni=$(echo "scale=1; $i/1000000" | bc -l); echo "$ni GHz"; done | \ sort | uniq -c 128 3.3 GHz I am not sure what the correct process is for submitting patches which affect only stable trees but not the current code base, and do not apply to the current tree. As such, I am submitting this directly to stable@, but please let me know if I should be submitting this elsewhere. The issue was introduced in v6.1 via commit bedadcfb011f ("cpufreq: amd-pstate: Fix initial highest_perf value"), and exists in stable kernels up until v6.6.51. In v6.6.51, a large change, commit 1ec40a175a48 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support"), was introduced which significantly refactored the code. This commit cannot be ported back on its own, and would require reviewing and cherry picking at least a few dozen of commits in cpufreq, amd-pstate, ACPI, CPPC. This means kernels v6.1 up until v6.6.51 are affected by this significant performance issue, and cannot be easily remediated. Thank you for your attention and I look forward to your response in regards to what the best way to proceed is for getting this important performance fix merged. Best Regards, Nabil S. Alramli (1): cpufreq: amd-pstate: Enable CPU boost in passive and guided modes drivers/cpufreq/amd-pstate.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) -- 2.35.1

1 month, 4 weeks

3
6
0 0

[PATCH] mtd: spi-nor: winbond: fix w25q128 regression

by Linus Walleij

From: Michael Walle <mwalle(a)kernel.org> Commit 83e824a4a595 ("mtd: spi-nor: Correct flags for Winbond w25q128") removed the flags for non-SFDP devices. It was assumed that it wasn't in use anymore. This wasn't true. Add the no_sfdp_flags as well as the size again. We add the additional flags for dual and quad read because they have been reported to work properly by Hartmut using both older and newer versions of this flash, the similar flashes with 64Mbit and 256Mbit already have these flags and because it will (luckily) trigger our legacy SFDP parsing, so newer versions with SFDP support will still get the parameters from the SFDP tables. This was applied to mainline as commit e49b2731c396 ("mtd: spi-nor: winbond: fix w25q128 regression") however the code has changed a lot after v6.6 so the patch did not apply to v6.6 or v6.1 which still has the problem. This patch fixes the issue in the way of the old API and has been tested on hardware. Please apply it for v6.1 and v6.6. Reported-by: Hartmut Birr <e9hack(a)gmail.com> Closes: https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4… Fixes: 83e824a4a595 ("mtd: spi-nor: Correct flags for Winbond w25q128") Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Michael Walle <mwalle(a)kernel.org> Acked-by: Tudor Ambarus <tudor.ambarus(a)linaro.org> Reviewed-by: Esben Haabendal <esben(a)geanix.com> Reviewed-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Pratyush Yadav <pratyush(a)kernel.org> Link: https://lore.kernel.org/r/20240621120929.2670185-1-mwalle@kernel.org [Backported to v6.6 - vastly different due to upstream changes] Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- This fix backported to stable v6.6 and v6.1 after reports from OpenWrt users: https://github.com/openwrt/openwrt/issues/16796 --- drivers/mtd/spi-nor/winbond.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c index cd99c9a1c568..95dd28b9bf14 100644 --- a/drivers/mtd/spi-nor/winbond.c +++ b/drivers/mtd/spi-nor/winbond.c @@ -120,9 +120,10 @@ static const struct flash_info winbond_nor_parts[] = { NO_SFDP_FLAGS(SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16) NO_SFDP_FLAGS(SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 0, 0) - PARSE_SFDP - FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256) + FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512) NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) .fixups = &w25q256_fixups }, --- base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa change-id: 20241027-v6-6-7ed05eaccb22 Best regards, -- Linus Walleij <linus.walleij(a)linaro.org>

1 month, 4 weeks

2
1
0 0

+ mm-thp-fix-deferred-split-unqueue-naming-and-locking.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/thp: fix deferred split unqueue naming and locking has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-thp-fix-deferred-split-unqueue-naming-and-locking.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Hugh Dickins <hughd(a)google.com> Subject: mm/thp: fix deferred split unqueue naming and locking Date: Sun, 27 Oct 2024 13:02:13 -0700 (PDT) Recent changes are putting more pressure on THP deferred split queues: under load revealing long-standing races, causing list_del corruptions, "Bad page state"s and worse (I keep BUGs in both of those, so usually don't get to see how badly they end up without). The relevant recent changes being 6.8's mTHP, 6.10's mTHP swapout, and 6.12's mTHP swapin, improved swap allocation, and underused THP splitting. Before fixing locking: rename misleading folio_undo_large_rmappable(), which does not undo large_rmappable, to folio_unqueue_deferred_split(), which is what it does. But that and its out-of-line __callee are mm internals of very limited usability: add comment and WARN_ON_ONCEs to check usage; and return a bool to say if a deferred split was unqueued, which can then be used in WARN_ON_ONCEs around safety checks (sparing callers the arcane conditionals in __folio_unqueue_deferred_split()). Just omit the folio_unqueue_deferred_split() from free_unref_folios(), all of whose callers now call it beforehand (and if any forget then bad_page() will tell) - except for its caller put_pages_list(), which itself no longer has any callers (and will be deleted separately). Swapout: mem_cgroup_swapout() has been resetting folio->memcg_data 0 without checking and unqueueing a THP folio from deferred split list; which is unfortunate, since the split_queue_lock depends on the memcg (when memcg is enabled); so swapout has been unqueueing such THPs later, when freeing the folio, using the pgdat's lock instead: potentially corrupting the memcg's list. __remove_mapping() has frozen refcount to 0 here, so no problem with calling folio_unqueue_deferred_split() before resetting memcg_data. That goes back to 5.4 commit 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware"): which included a check on swapcache before adding to deferred queue, but no check on deferred queue before adding THP to swapcache. That worked fine with the usual sequence of events in reclaim (though there were a couple of rare ways in which a THP on deferred queue could have been swapped out), but 6.12 commit dafff3f4c850 ("mm: split underused THPs") avoids splitting underused THPs in reclaim, which makes swapcache THPs on deferred queue commonplace. Keep the check on swapcache before adding to deferred queue? Yes: it is no longer essential, but preserves the existing behaviour, and is likely to be a worthwhile optimization (vmstat showed much more traffic on the queue under swapping load if the check was removed); update its comment. Memcg-v1 move (deprecated): mem_cgroup_move_account() has been changing folio->memcg_data without checking and unqueueing a THP folio from the deferred list, sometimes corrupting "from" memcg's list, like swapout. Refcount is non-zero here, so folio_unqueue_deferred_split() can only be used in a WARN_ON_ONCE to validate the fix, which must be done earlier: mem_cgroup_move_charge_pte_range() first try to split the THP (splitting of course unqueues), or skip it if that fails. Not ideal, but moving charge has been requested, and khugepaged should repair the THP later: nobody wants new custom unqueueing code just for this deprecated case. The 87eaceb3faa5 commit did have the code to move from one deferred list to another (but was not conscious of its unsafety while refcount non-0); but that was removed by 5.6 commit fac0516b5534 ("mm: thp: don't need care deferred split queue in memcg charge move path"), which argued that the existence of a PMD mapping guarantees that the THP cannot be on a deferred list. As above, false in rare cases, and now commonly false. Backport to 6.11 should be straightforward. Earlier backports must take care that other _deferred_list fixes and dependencies are included. There is not a strong case for backports, but they can fix cornercases. Link: https://lkml.kernel.org/r/8dc111ae-f6db-2da7-b25c-7a20b1effe3b@google.com Fixes: 87eaceb3faa5 ("mm: thp: make deferred split shrinker memcg aware") Fixes: dafff3f4c850 ("mm: split underused THPs") Signed-off-by: Hugh Dickins <hughd(a)google.com> Acked-by: David Hildenbrand <david(a)redhat.com> Reviewed-by: Yang Shi <shy828301(a)gmail.com> Cc: Baolin Wang <baolin.wang(a)linux.alibaba.com> Cc: Barry Song <baohua(a)kernel.org> Cc: Chris Li <chrisl(a)kernel.org> Cc: Johannes Weiner <hannes(a)cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang(a)huawei.com> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: Nhat Pham <nphamcs(a)gmail.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Shakeel Butt <shakeel.butt(a)linux.dev> Cc: Usama Arif <usamaarif642(a)gmail.com> Cc: Wei Yang <richard.weiyang(a)gmail.com> Cc: Zi Yan <ziy(a)nvidia.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/huge_memory.c | 35 ++++++++++++++++++++++++++--------- mm/internal.h | 10 +++++----- mm/memcontrol-v1.c | 25 +++++++++++++++++++++++++ mm/memcontrol.c | 8 +++++--- mm/migrate.c | 4 ++-- mm/page_alloc.c | 1 - mm/swap.c | 4 ++-- mm/vmscan.c | 4 ++-- 8 files changed, 67 insertions(+), 24 deletions(-) --- a/mm/huge_memory.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/huge_memory.c @@ -3588,10 +3588,27 @@ int split_folio_to_list(struct folio *fo return split_huge_page_to_list_to_order(&folio->page, list, ret); } -void __folio_undo_large_rmappable(struct folio *folio) +/* + * __folio_unqueue_deferred_split() is not to be called directly: + * the folio_unqueue_deferred_split() inline wrapper in mm/internal.h + * limits its calls to those folios which may have a _deferred_list for + * queueing THP splits, and that list is (racily observed to be) non-empty. + * + * It is unsafe to call folio_unqueue_deferred_split() until folio refcount is + * zero: because even when split_queue_lock is held, a non-empty _deferred_list + * might be in use on deferred_split_scan()'s unlocked on-stack list. + * + * If memory cgroups are enabled, split_queue_lock is in the mem_cgroup: it is + * therefore important to unqueue deferred split before changing folio memcg. + */ +bool __folio_unqueue_deferred_split(struct folio *folio) { struct deferred_split *ds_queue; unsigned long flags; + bool unqueued = false; + + WARN_ON_ONCE(folio_ref_count(folio)); + WARN_ON_ONCE(!mem_cgroup_disabled() && !folio_memcg(folio)); ds_queue = get_deferred_split_queue(folio); spin_lock_irqsave(&ds_queue->split_queue_lock, flags); @@ -3603,8 +3620,11 @@ void __folio_undo_large_rmappable(struct MTHP_STAT_NR_ANON_PARTIALLY_MAPPED, -1); } list_del_init(&folio->_deferred_list); + unqueued = true; } spin_unlock_irqrestore(&ds_queue->split_queue_lock, flags); + + return unqueued; /* useful for debug warnings */ } /* partially_mapped=false won't clear PG_partially_mapped folio flag */ @@ -3627,14 +3647,11 @@ void deferred_split_folio(struct folio * return; /* - * The try_to_unmap() in page reclaim path might reach here too, - * this may cause a race condition to corrupt deferred split queue. - * And, if page reclaim is already handling the same folio, it is - * unnecessary to handle it again in shrinker. - * - * Check the swapcache flag to determine if the folio is being - * handled by page reclaim since THP swap would add the folio into - * swap cache before calling try_to_unmap(). + * Exclude swapcache: originally to avoid a corrupt deferred split + * queue. Nowadays that is fully prevented by mem_cgroup_swapout(); + * but if page reclaim is already handling the same folio, it is + * unnecessary to handle it again in the shrinker, so excluding + * swapcache here may still be a useful optimization. */ if (folio_test_swapcache(folio)) return; --- a/mm/internal.h~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/internal.h @@ -684,11 +684,11 @@ static inline void folio_set_order(struc #endif } -void __folio_undo_large_rmappable(struct folio *folio); -static inline void folio_undo_large_rmappable(struct folio *folio) +bool __folio_unqueue_deferred_split(struct folio *folio); +static inline bool folio_unqueue_deferred_split(struct folio *folio) { if (folio_order(folio) <= 1 || !folio_test_large_rmappable(folio)) - return; + return false; /* * At this point, there is no one trying to add the folio to @@ -696,9 +696,9 @@ static inline void folio_undo_large_rmap * to check without acquiring the split_queue_lock. */ if (data_race(list_empty(&folio->_deferred_list))) - return; + return false; - __folio_undo_large_rmappable(folio); + return __folio_unqueue_deferred_split(folio); } static inline struct folio *page_rmappable_folio(struct page *page) --- a/mm/memcontrol.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/memcontrol.c @@ -4629,9 +4629,6 @@ static void uncharge_folio(struct folio struct obj_cgroup *objcg; VM_BUG_ON_FOLIO(folio_test_lru(folio), folio); - VM_BUG_ON_FOLIO(folio_order(folio) > 1 && - !folio_test_hugetlb(folio) && - !list_empty(&folio->_deferred_list), folio); /* * Nobody should be changing or seriously looking at @@ -4678,6 +4675,7 @@ static void uncharge_folio(struct folio ug->nr_memory += nr_pages; ug->pgpgout++; + WARN_ON_ONCE(folio_unqueue_deferred_split(folio)); folio->memcg_data = 0; } @@ -4789,6 +4787,9 @@ void mem_cgroup_migrate(struct folio *ol /* Transfer the charge and the css ref */ commit_charge(new, memcg); + + /* Warning should never happen, so don't worry about refcount non-0 */ + WARN_ON_ONCE(folio_unqueue_deferred_split(old)); old->memcg_data = 0; } @@ -4975,6 +4976,7 @@ void mem_cgroup_swapout(struct folio *fo VM_BUG_ON_FOLIO(oldid, folio); mod_memcg_state(swap_memcg, MEMCG_SWAP, nr_entries); + folio_unqueue_deferred_split(folio); folio->memcg_data = 0; if (!mem_cgroup_is_root(memcg)) --- a/mm/memcontrol-v1.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/memcontrol-v1.c @@ -848,6 +848,8 @@ static int mem_cgroup_move_account(struc css_get(&to->css); css_put(&from->css); + /* Warning should never happen, so don't worry about refcount non-0 */ + WARN_ON_ONCE(folio_unqueue_deferred_split(folio)); folio->memcg_data = (unsigned long)to; __folio_memcg_unlock(from); @@ -1217,7 +1219,9 @@ static int mem_cgroup_move_charge_pte_ra enum mc_target_type target_type; union mc_target target; struct folio *folio; + bool tried_split_before = false; +retry_pmd: ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) { if (mc.precharge < HPAGE_PMD_NR) { @@ -1227,6 +1231,27 @@ static int mem_cgroup_move_charge_pte_ra target_type = get_mctgt_type_thp(vma, addr, *pmd, &target); if (target_type == MC_TARGET_PAGE) { folio = target.folio; + /* + * Deferred split queue locking depends on memcg, + * and unqueue is unsafe unless folio refcount is 0: + * split or skip if on the queue? first try to split. + */ + if (!list_empty(&folio->_deferred_list)) { + spin_unlock(ptl); + if (!tried_split_before) + split_folio(folio); + folio_unlock(folio); + folio_put(folio); + if (tried_split_before) + return 0; + tried_split_before = true; + goto retry_pmd; + } + /* + * So long as that pmd lock is held, the folio cannot + * be racily added to the _deferred_list, because + * __folio_remove_rmap() will find !partially_mapped. + */ if (folio_isolate_lru(folio)) { if (!mem_cgroup_move_account(folio, true, mc.from, mc.to)) { --- a/mm/migrate.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/migrate.c @@ -490,7 +490,7 @@ static int __folio_migrate_mapping(struc folio_test_large_rmappable(folio)) { if (!folio_ref_freeze(folio, expected_count)) return -EAGAIN; - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); folio_ref_unfreeze(folio, expected_count); } @@ -515,7 +515,7 @@ static int __folio_migrate_mapping(struc } /* Take off deferred split queue while frozen and memcg set */ - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); /* * Now we know that no one else is looking at the folio: --- a/mm/page_alloc.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/page_alloc.c @@ -2686,7 +2686,6 @@ void free_unref_folios(struct folio_batc unsigned long pfn = folio_pfn(folio); unsigned int order = folio_order(folio); - folio_undo_large_rmappable(folio); if (!free_pages_prepare(&folio->page, order)) continue; /* --- a/mm/swap.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/swap.c @@ -121,7 +121,7 @@ void __folio_put(struct folio *folio) } page_cache_release(folio); - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); mem_cgroup_uncharge(folio); free_unref_page(&folio->page, folio_order(folio)); } @@ -988,7 +988,7 @@ void folios_put_refs(struct folio_batch free_huge_folio(folio); continue; } - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); __page_cache_release(folio, &lruvec, &flags); if (j != i) --- a/mm/vmscan.c~mm-thp-fix-deferred-split-unqueue-naming-and-locking +++ a/mm/vmscan.c @@ -1476,7 +1476,7 @@ free_it: */ nr_reclaimed += nr_pages; - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); if (folio_batch_add(&free_folios, folio) == 0) { mem_cgroup_uncharge_folios(&free_folios); try_to_unmap_flush(); @@ -1864,7 +1864,7 @@ static unsigned int move_folios_to_lru(s if (unlikely(folio_put_testzero(folio))) { __folio_clear_lru_flags(folio); - folio_undo_large_rmappable(folio); + folio_unqueue_deferred_split(folio); if (folio_batch_add(&free_folios, folio) == 0) { spin_unlock_irq(&lruvec->lru_lock); mem_cgroup_uncharge_folios(&free_folios); _ Patches currently in -mm which might be from hughd(a)google.com are mm-thp-fix-deferred-split-queue-not-partially_mapped.patch mm-thp-fix-deferred-split-unqueue-naming-and-locking.patch mm-delete-the-unused-put_pages_list.patch

1 month, 4 weeks

1
0
0 0

[PATCH v3] xhci: Fix Link TRB DMA in command ring stopped completion event

by Faisal Hassan

During the aborting of a command, the software receives a command completion event for the command ring stopped, with the TRB pointing to the next TRB after the aborted command. If the command we abort is located just before the Link TRB in the command ring, then during the 'command ring stopped' completion event, the xHC gives the Link TRB in the event's cmd DMA, which causes a mismatch in handling command completion event. To address this situation, move the 'command ring stopped' completion event check slightly earlier, since the specific command it stopped on isn't of significant concern. Fixes: 7f84eef0dafb ("USB: xhci: No-op command queueing and irq handler.") Cc: stable(a)vger.kernel.org Signed-off-by: Faisal Hassan <quic_faisalh(a)quicinc.com> --- Changes in v3: - Skip dma check for the cmd ring stopped event - v2 link: https://lore.kernel.org/all/20241021131904.20678-1-quic_faisalh@quicinc.com Changes in v2: - Added Fixes tag - Removed traversing of TRBs with in_range() API. - Simplified the if condition check. - v1 link: https://lore.kernel.org/all/20241018195953.12315-1-quic_faisalh@quicinc.com drivers/usb/host/xhci-ring.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b2950c35c740..1ffc69c48eac 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1718,6 +1718,14 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic); + cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); + + /* If CMD ring stopped we own the trbs between enqueue and dequeue */ + if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) { + complete_all(&xhci->cmd_ring_stop_completion); + return; + } + cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, cmd_trb); /* @@ -1734,14 +1742,6 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cancel_delayed_work(&xhci->cmd_timer); - cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); - - /* If CMD ring stopped we own the trbs between enqueue and dequeue */ - if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) { - complete_all(&xhci->cmd_ring_stop_completion); - return; - } - if (cmd->command_trb != xhci->cmd_ring->dequeue) { xhci_err(xhci, "Command completion event does not match command\n"); -- 2.17.1

1 month, 4 weeks

3
2
0 0

patch "docs: iio: ad7380: fix supply for ad7380-4" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled docs: iio: ad7380: fix supply for ad7380-4 to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. From 795114e849ddfd48150eb0135d04748a8c81cec5 Mon Sep 17 00:00:00 2001 From: Julien Stephan <jstephan(a)baylibre.com> Date: Tue, 22 Oct 2024 15:22:40 +0200 Subject: docs: iio: ad7380: fix supply for ad7380-4 ad7380-4 is the only device from ad738x family that doesn't have an internal reference. Moreover it's external reference is called REFIN in the datasheet while all other use REFIO as an optional external reference. Update documentation to highlight this. Fixes: 3e82dfc82f38 ("docs: iio: new docs for ad7380 driver") Reviewed-by: David Lechner <dlechner(a)baylibre.com> Signed-off-by: Julien Stephan <jstephan(a)baylibre.com> Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-5-f0cefe1b7fa6@bay… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- Documentation/iio/ad7380.rst | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/Documentation/iio/ad7380.rst b/Documentation/iio/ad7380.rst index 9c784c1e652e..6f70b49b9ef2 100644 --- a/Documentation/iio/ad7380.rst +++ b/Documentation/iio/ad7380.rst @@ -41,13 +41,22 @@ supports only 1 SDO line. Reference voltage ----------------- -2 possible reference voltage sources are supported: +ad7380-4 +~~~~~~~~ + +ad7380-4 supports only an external reference voltage (2.5V to 3.3V). It must be +declared in the device tree as ``refin-supply``. + +All other devices from ad738x family +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +All other devices from ad738x support 2 possible reference voltage sources: - Internal reference (2.5V) - External reference (2.5V to 3.3V) The source is determined by the device tree. If ``refio-supply`` is present, -then the external reference is used, else the internal reference is used. +then it is used as external reference, else the internal reference is used. Oversampling and resolution boost --------------------------------- -- 2.47.0

1 month, 4 weeks

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2024