January 2024 - Linux-stable-mirror

[PATCH v7 7/7] serial: 8250_exar: Set missing rs485_supported flag

by Lino Sanfilippo

The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: stable(a)vger.kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> --- drivers/tty/serial/8250/8250_exar.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 6085d356ad86..23366f868ae3 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -480,7 +480,7 @@ static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termio } static const struct serial_rs485 generic_rs485_supported = { - .flags = SER_RS485_ENABLED, + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND, }; static const struct exar8250_platform exar8250_default_platform = { @@ -524,7 +524,8 @@ static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios } static const struct serial_rs485 iot2040_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, }; static const struct property_entry iot2040_gpio_properties[] = { -- 2.43.0

1 year, 3 months

1
0
0 0

[PATCH v7 4/7] serial: core: make sure RS485 cannot be enabled when it is not supported

by Lino Sanfilippo

Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. This has a small impact on userspace visibility but it is consistent with the -ENOTTY error for TIOCGRS485. Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported") Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization") Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: stable(a)vger.kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> --- drivers/tty/serial/serial_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index f67fb6a04983..28bcbc686c67 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1469,7 +1469,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, int ret; unsigned long flags; - if (!port->rs485_config) + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) return -ENOTTY; if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) -- 2.43.0

1 year, 3 months

1
0
0 0

[PATCH v7 3/7] serial: core: fix sanitizing check for RTS settings

by Lino Sanfilippo

Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS settings in a RS485 configuration that has been passed by userspace. If RTS-on-send and RTS-after-send are both set or unset the configuration is adjusted and RTS-after-send is disabled and RTS-on-send enabled. This however makes only sense if both RTS modes are actually supported by the driver. With commit be2e2cb1d281 ("serial: Sanitize rs485_struct") the code does take the driver support into account but only checks if one of both RTS modes are supported. This may lead to the errorneous result of RTS-on-send being set even if only RTS-after-send is supported. Fix this by changing the implemented logic: First clear all unsupported flags in the RS485 configuration, then adjust an invalid RTS setting by taking into account which RTS mode is supported. Cc: stable(a)vger.kernel.org Fixes: be2e2cb1d281 ("serial: Sanitize rs485_struct") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> --- drivers/tty/serial/serial_core.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 1204102d7162..f67fb6a04983 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1371,19 +1371,27 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4 return; } + rs485->flags &= supported_flags; + /* Pick sane settings if the user hasn't */ - if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) && - !(rs485->flags & SER_RS485_RTS_ON_SEND) == + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { - dev_warn_ratelimited(port->dev, - "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", - port->name, port->line); - rs485->flags |= SER_RS485_RTS_ON_SEND; - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - supported_flags |= SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND; - } + if (supported_flags & SER_RS485_RTS_ON_SEND) { + rs485->flags |= SER_RS485_RTS_ON_SEND; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - rs485->flags &= supported_flags; + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", + port->name, port->line); + } else { + rs485->flags |= SER_RS485_RTS_AFTER_SEND; + rs485->flags &= ~SER_RS485_RTS_ON_SEND; + + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n", + port->name, port->line); + } + } uart_sanitize_serial_rs485_delays(port, rs485); -- 2.43.0

1 year, 3 months

1
0
0 0

[PATCH v7 2/7] serial: core: set missing supported flag for RX during TX GPIO

by Lino Sanfilippo

If the RS485 feature RX-during-TX is supported by means of a GPIO set the according supported flag. Otherwise setting this feature from userspace may not be possible, since in uart_sanitize_serial_rs485() the passed RS485 configuration is matched against the supported features and unsupported settings are thereby removed and thus take no effect. Cc: stable(a)vger.kernel.org Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> --- drivers/tty/serial/serial_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index d155131f221d..1204102d7162 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3642,6 +3642,8 @@ int uart_get_rs485_mode(struct uart_port *port) if (IS_ERR(desc)) return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n"); port->rs485_rx_during_tx_gpio = desc; + if (port->rs485_rx_during_tx_gpio) + port->rs485_supported.flags |= SER_RS485_RX_DURING_TX; return 0; } -- 2.43.0

1 year, 3 months

1
0
0 0

Fw:Re: hooks, wire rings ,brass buckles ,rings,brass snaps ,buckles,bars ,d rings stainless steel supply ?

by aplusfactory＠126.vip.com

Dear Sir : Nice day! This is Lily from METAL & HARNESSES factory ,we make D rings , O rings ,clasps ,clips , fastening,rivets , grommets,eyelets,buckles,screws , harnesses ,wires ,bolts ,nuts ,clips ,bits ,spurs ,screws,anchors,stainless steel hardware , brass hardware,steel harnesses ,metal & Harnesses,belt and buckles,straps ,leather Harnesses,tags ,belts,straps ,clips ,rings bars ,hooks , safety buckles,brass buckles, brass rings ,belts,buckles ,Split Ring ,straps ,sliders,snaps ,Bars Rings, Fasteners, magnent buttons,craft hardware ,bindings ,knobs,steps ,straps , bits ,eyelets ,tools , metal gear , metal hardware , metal products, metal Components,S hooks ,bars ,snaps ,webbings , buckles, HOOK,brass buckles, clips , hooks ,straps , accessories ,brass snaps ,brass gear , stainless steel hardware,steel harness ,steel wires, wire rings , wire buckles ,brass gears ,brass products ,iron metal hardware ,Fasteners,safety buckles,brass buckles, brass rings ,belts,buckles ,Ring ,Squares ,straps ,sliders,Bars Rings,textile accessories , Buckles, Cord locks, Hooks & Rings,Tabs, Locks and Slides,magnent buttons,carabiners,trigger ,buttons ,snaps ,fasteners, webbings , webbing buckles, buttons,Hook Loop ，textile accessories,safety buckles,sliders,snaps ,Rings ,chains,suspenders as required for our global clients . We are manufactory, we are the source, our price is very competitive ,you will get the best price , We have profuse designs with series quality grade, and expressly. Our factory always produce customer designs and drawing , if you have any products looking please let me know we could surely make for you Sincerely hope could work with you ! Best regards Lily

1 year, 3 months

1
0
0 0

[for-linus][PATCH 2/2] eventfs: Fix bitwise fields for "is_events"

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> A flag was needed to denote which eventfs_inode was the "events" directory, so a bit was taken from the "nr_entries" field, as there's not that many entries, and 2^30 is plenty. But the bit number for nr_entries was not updated to reflect the bit taken from it, which would add an unnecessary integer to the structure. Link: https://lore.kernel.org/linux-trace-kernel/20240102151832.7ca87275@gandalf.… Cc: stable(a)vger.kernel.org Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership") Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- fs/tracefs/internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/tracefs/internal.h b/fs/tracefs/internal.h index 899e447778ac..42bdeb471a07 100644 --- a/fs/tracefs/internal.h +++ b/fs/tracefs/internal.h @@ -63,7 +63,7 @@ struct eventfs_inode { }; unsigned int is_freed:1; unsigned int is_events:1; - unsigned int nr_entries:31; + unsigned int nr_entries:30; }; static inline struct tracefs_inode *get_tracefs(const struct inode *inode) -- 2.42.0

1 year, 3 months

1
0
0 0

[for-linus][PATCH 1/2] tracefs: Check for dentry->d_inode exists in set_gid()

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> If a getdents() is called on the tracefs directory but does not get all the files, it can leave a "cursor" dentry in the d_subdirs list of tracefs dentry. This cursor dentry does not have a d_inode for it. Before referencing tracefs_inode from the dentry, the d_inode must first be checked if it has content. If not, then it's not a tracefs_inode and can be ignored. The following caused a crash: #define getdents64(fd, dirp, count) syscall(SYS_getdents64, fd, dirp, count) #define BUF_SIZE 256 #define TDIR "/tmp/file0" int main(void) { char buf[BUF_SIZE]; int fd; int n; mkdir(TDIR, 0777); mount(NULL, TDIR, "tracefs", 0, NULL); fd = openat(AT_FDCWD, TDIR, O_RDONLY); n = getdents64(fd, buf, BUF_SIZE); ret = mount(NULL, TDIR, NULL, MS_NOSUID|MS_REMOUNT|MS_RELATIME|MS_LAZYTIME, "gid=1000"); return 0; } That's because the 256 BUF_SIZE was not big enough to read all the dentries of the tracefs file system and it left a "cursor" dentry in the subdirs of the tracefs root inode. Then on remounting with "gid=1000", it would cause an iteration of all dentries which hit: ti = get_tracefs(dentry->d_inode); if (ti && (ti->flags & TRACEFS_EVENT_INODE)) eventfs_update_gid(dentry, gid); Which crashed because of the dereference of the cursor dentry which had a NULL d_inode. In the subdir loop of the dentry lookup of set_gid(), if a child has a NULL d_inode, simply skip it. Link: https://lore.kernel.org/all/20240102135637.3a21fb10@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20240102151249.05da244d@gandalf.… Cc: stable(a)vger.kernel.org Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership") Reported-by: "Ubisectech Sirius" <bugreport(a)ubisectech.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- fs/tracefs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index 62524b20964e..bc86ffdb103b 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -215,6 +215,10 @@ static void set_gid(struct dentry *parent, kgid_t gid) struct dentry *dentry = list_entry(tmp, struct dentry, d_child); next = tmp->next; + /* Note, getdents() can add a cursor dentry with no inode */ + if (!dentry->d_inode) + continue; + spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED); change_gid(dentry, gid); -- 2.42.0

1 year, 3 months

1
0
0 0

[PATCH net 0/2] mptcp: new reviewer and prevent a warning

by Matthieu Baerts

Patch 1 adds MPTCP long time contributor -- Geliang Tang -- as a new reviewer for the project. Thanks! Patch 2 prevents a warning when TCP Diag is used to close internal MPTCP listener subflows. This is a correction for a patch introduced in v6.4 which was fixing an issue from v5.17. Signed-off-by: Matthieu Baerts <matttbe(a)kernel.org> --- Matthieu Baerts (1): MAINTAINERS: add Geliang as reviewer for MPTCP Paolo Abeni (1): mptcp: prevent tcp diag from closing listener subflows MAINTAINERS | 1 + net/mptcp/subflow.c | 13 +++++++++++++ 2 files changed, 14 insertions(+) --- base-commit: dff90e4a092b771354287fbe55e557467c9da620 change-id: 20231226-upstream-net-20231226-mptcp-prevent-warn-24f9494bb2a0 Best regards, -- Matthieu Baerts <matttbe(a)kernel.org>

1 year, 3 months

2
2
0 0

FAILED: patch "[PATCH] ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x d10c77873ba1e9e6b91905018e29e196fd5f863d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024010241-define-gangly-9bf9@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: d10c77873ba1 ("ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d10c77873ba1e9e6b91905018e29e196fd5f863d Mon Sep 17 00:00:00 2001 From: Namjae Jeon <linkinjeon(a)kernel.org> Date: Wed, 20 Dec 2023 15:52:11 +0900 Subject: [PATCH] ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16() If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length, ksmbd_check_message doesn't validate request buffer it correctly. So slab-out-of-bounds warning from calling smb_strndup_from_utf16() in smb2_open() could happen. If ->NameLength is non-zero, Set the larger of the two sums (Name and CreateContext size) as the offset and length of the data area. Reported-by: Yang Chaoming <lometsj(a)live.com> Cc: stable(a)vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> diff --git a/fs/smb/server/smb2misc.c b/fs/smb/server/smb2misc.c index 23bd3d1209df..03dded29a980 100644 --- a/fs/smb/server/smb2misc.c +++ b/fs/smb/server/smb2misc.c @@ -106,16 +106,25 @@ static int smb2_get_data_area_len(unsigned int *off, unsigned int *len, break; case SMB2_CREATE: { + unsigned short int name_off = + le16_to_cpu(((struct smb2_create_req *)hdr)->NameOffset); + unsigned short int name_len = + le16_to_cpu(((struct smb2_create_req *)hdr)->NameLength); + if (((struct smb2_create_req *)hdr)->CreateContextsLength) { *off = le32_to_cpu(((struct smb2_create_req *) hdr)->CreateContextsOffset); *len = le32_to_cpu(((struct smb2_create_req *) hdr)->CreateContextsLength); - break; + if (!name_len) + break; + + if (name_off + name_len < (u64)*off + *len) + break; } - *off = le16_to_cpu(((struct smb2_create_req *)hdr)->NameOffset); - *len = le16_to_cpu(((struct smb2_create_req *)hdr)->NameLength); + *off = name_off; + *len = name_len; break; } case SMB2_QUERY_INFO:

1 year, 3 months

2
1
0 0

[PATCH] drm/vmwgfx: Unmap the surface before resetting it on a plane state

by Zack Rusin

Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Signed-off-by: Zack Rusin <zack.rusin(a)broadcom.com> Fixes: 485d98d472d5 ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Reported-by: Stefan Hoffmeister <stefan.hoffmeister(a)econos.de> Closes: https://gitlab.freedesktop.org/drm/misc/-/issues/34 Cc: Martin Krastev <martin.krastev(a)broadcom.com> Cc: Maaz Mombasawala <maaz.mombasawala(a)broadcom.com> Cc: Ian Forbes <ian.forbes(a)broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list(a)broadcom.com> Cc: dri-devel(a)lists.freedesktop.org Cc: <stable(a)vger.kernel.org> # v5.19+ --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 65ed9b061753..e7bbe4b05233 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -693,6 +693,10 @@ vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, int ret = 0; if (vps->surf) { + if (vps->surf_mapped) { + vmw_bo_unmap(vps->surf->res.guest_memory_bo); + vps->surf_mapped = false; + } vmw_surface_unreference(&vps->surf); vps->surf = NULL; } -- 2.40.1

1 year, 3 months

4
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2024