The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012259-headset-sludge-38da@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
6d710b769c1f ("serial: sc16is7xx: add check for unsupported SPI modes during probe")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:09 -0500
Subject: [PATCH] serial: sc16is7xx: add check for unsupported SPI modes during
probe
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 17b90f971f96..798fa115b28a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1733,7 +1733,10 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
/* Setup SPI bus */
spi->bits_per_word = 8;
- /* only supports mode 0 on SC16IS762 */
+ /* For all variants, only mode 0 is supported */
+ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+ return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
ret = spi_setup(spi);
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012255-elephant-mannish-5753@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
6d710b769c1f ("serial: sc16is7xx: add check for unsupported SPI modes during probe")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:09 -0500
Subject: [PATCH] serial: sc16is7xx: add check for unsupported SPI modes during
probe
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 17b90f971f96..798fa115b28a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1733,7 +1733,10 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
/* Setup SPI bus */
spi->bits_per_word = 8;
- /* only supports mode 0 on SC16IS762 */
+ /* For all variants, only mode 0 is supported */
+ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+ return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
ret = spi_setup(spi);
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012252-unseated-unfailing-db96@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
6d710b769c1f ("serial: sc16is7xx: add check for unsupported SPI modes during probe")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:09 -0500
Subject: [PATCH] serial: sc16is7xx: add check for unsupported SPI modes during
probe
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 17b90f971f96..798fa115b28a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1733,7 +1733,10 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
/* Setup SPI bus */
spi->bits_per_word = 8;
- /* only supports mode 0 on SC16IS762 */
+ /* For all variants, only mode 0 is supported */
+ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+ return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
ret = spi_setup(spi);
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 3ef79cd1412236d884ab0c46b4d1921380807b48
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012226-nuttiness-uproot-f978@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
3ef79cd14122 ("serial: sc16is7xx: set safe default SPI clock frequency")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3ef79cd1412236d884ab0c46b4d1921380807b48 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:10 -0500
Subject: [PATCH] serial: sc16is7xx: set safe default SPI clock frequency
15 MHz is supported only by 76x variants.
If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.
Also use HZ_PER_MHZ macro to improve readability.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 798fa115b28a..ced2446909a2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <uapi/linux/sched/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
@@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
- spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 3ef79cd1412236d884ab0c46b4d1921380807b48
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012254-quotable-dandelion-018f@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
3ef79cd14122 ("serial: sc16is7xx: set safe default SPI clock frequency")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3ef79cd1412236d884ab0c46b4d1921380807b48 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:10 -0500
Subject: [PATCH] serial: sc16is7xx: set safe default SPI clock frequency
15 MHz is supported only by 76x variants.
If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.
Also use HZ_PER_MHZ macro to improve readability.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 798fa115b28a..ced2446909a2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <uapi/linux/sched/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
@@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
- spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 3ef79cd1412236d884ab0c46b4d1921380807b48
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012241-tactile-unison-0225@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
3ef79cd14122 ("serial: sc16is7xx: set safe default SPI clock frequency")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3ef79cd1412236d884ab0c46b4d1921380807b48 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:10 -0500
Subject: [PATCH] serial: sc16is7xx: set safe default SPI clock frequency
15 MHz is supported only by 76x variants.
If the SPI clock frequency is not specified, use a safe default clock value
of 4 MHz that is supported by all variants.
Also use HZ_PER_MHZ macro to improve readability.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 798fa115b28a..ced2446909a2 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -24,6 +24,7 @@
#include <linux/tty_flip.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#include <uapi/linux/sched/types.h>
#define SC16IS7XX_NAME "sc16is7xx"
@@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi)
return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
spi->mode = spi->mode ? : SPI_MODE_0;
- spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ;
ret = spi_setup(spi);
if (ret)
return ret;