January 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x d5078509c8b06c5c472a60232815e41af81c6446 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012626-mutilator-saline-742b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: d5078509c8b0 ("serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported") 21144bab4f11 ("sc16is7xx: Handle modem status lines") cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") d4ab5487cc77 ("Merge 5.17-rc6 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d5078509c8b06c5c472a60232815e41af81c6446 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:12 -0500 Subject: [PATCH] serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() Simplify and improve readability by replacing while(1) loop with do {} while, and by using the keep_polling variable as the exit condition, making it more explicit. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 44a11c89c949..8d257208cbf3 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -783,17 +783,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) { + bool keep_polling; + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; - while (1) { - bool keep_polling = false; + do { int i; + keep_polling = false; + for (i = 0; i < s->devtype->nr_uart; ++i) keep_polling |= sc16is7xx_port_irq(s, i); - if (!keep_polling) - break; - } + } while (keep_polling); return IRQ_HANDLED; }

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: remove obsolete loop in" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x ed647256e8f226241ecff7baaecdb8632ffc7ec1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012611-quickness-simmering-9ae2@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: ed647256e8f2 ("serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") e045e18dbf3e ("Merge 6.7-rc5 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:11 -0500 Subject: [PATCH] serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ced2446909a2..44a11c89c949 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) { bool rc = true; + unsigned int iir, rxlen; struct uart_port *port = &s->p[portno].port; struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); mutex_lock(&one->efr_lock); - do { - unsigned int iir, rxlen; + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) { + rc = false; + goto out_port_irq; + } - iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); - if (iir & SC16IS7XX_IIR_NO_INT_BIT) { - rc = false; - goto out_port_irq; - } + iir &= SC16IS7XX_IIR_ID_MASK; - iir &= SC16IS7XX_IIR_ID_MASK; - - switch (iir) { - case SC16IS7XX_IIR_RDI_SRC: - case SC16IS7XX_IIR_RLSE_SRC: - case SC16IS7XX_IIR_RTOI_SRC: - case SC16IS7XX_IIR_XOFFI_SRC: - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - - /* - * There is a silicon bug that makes the chip report a - * time-out interrupt but no data in the FIFO. This is - * described in errata section 18.1.4. - * - * When this happens, read one byte from the FIFO to - * clear the interrupt. - */ - if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) - rxlen = 1; - - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); - break; + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; /* CTSRTS interrupt comes only when CTS goes inactive */ - case SC16IS7XX_IIR_CTSRTS_SRC: - case SC16IS7XX_IIR_MSI_SRC: - sc16is7xx_update_mlines(one); - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); - break; - default: - dev_err_ratelimited(port->dev, - "ttySC%i: Unexpected interrupt: %x", - port->line, iir); - break; - } - } while (0); + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } out_port_irq: mutex_unlock(&one->efr_lock);

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: remove obsolete loop in" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x ed647256e8f226241ecff7baaecdb8632ffc7ec1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012610-unjustly-underdone-ddf3@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: ed647256e8f2 ("serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") e045e18dbf3e ("Merge 6.7-rc5 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:11 -0500 Subject: [PATCH] serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ced2446909a2..44a11c89c949 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) { bool rc = true; + unsigned int iir, rxlen; struct uart_port *port = &s->p[portno].port; struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); mutex_lock(&one->efr_lock); - do { - unsigned int iir, rxlen; + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) { + rc = false; + goto out_port_irq; + } - iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); - if (iir & SC16IS7XX_IIR_NO_INT_BIT) { - rc = false; - goto out_port_irq; - } + iir &= SC16IS7XX_IIR_ID_MASK; - iir &= SC16IS7XX_IIR_ID_MASK; - - switch (iir) { - case SC16IS7XX_IIR_RDI_SRC: - case SC16IS7XX_IIR_RLSE_SRC: - case SC16IS7XX_IIR_RTOI_SRC: - case SC16IS7XX_IIR_XOFFI_SRC: - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - - /* - * There is a silicon bug that makes the chip report a - * time-out interrupt but no data in the FIFO. This is - * described in errata section 18.1.4. - * - * When this happens, read one byte from the FIFO to - * clear the interrupt. - */ - if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) - rxlen = 1; - - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); - break; + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; /* CTSRTS interrupt comes only when CTS goes inactive */ - case SC16IS7XX_IIR_CTSRTS_SRC: - case SC16IS7XX_IIR_MSI_SRC: - sc16is7xx_update_mlines(one); - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); - break; - default: - dev_err_ratelimited(port->dev, - "ttySC%i: Unexpected interrupt: %x", - port->line, iir); - break; - } - } while (0); + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } out_port_irq: mutex_unlock(&one->efr_lock);

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: remove obsolete loop in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ed647256e8f226241ecff7baaecdb8632ffc7ec1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012609-phonebook-scrimmage-36f9@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: ed647256e8f2 ("serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") e045e18dbf3e ("Merge 6.7-rc5 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:11 -0500 Subject: [PATCH] serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ced2446909a2..44a11c89c949 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) { bool rc = true; + unsigned int iir, rxlen; struct uart_port *port = &s->p[portno].port; struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); mutex_lock(&one->efr_lock); - do { - unsigned int iir, rxlen; + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) { + rc = false; + goto out_port_irq; + } - iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); - if (iir & SC16IS7XX_IIR_NO_INT_BIT) { - rc = false; - goto out_port_irq; - } + iir &= SC16IS7XX_IIR_ID_MASK; - iir &= SC16IS7XX_IIR_ID_MASK; - - switch (iir) { - case SC16IS7XX_IIR_RDI_SRC: - case SC16IS7XX_IIR_RLSE_SRC: - case SC16IS7XX_IIR_RTOI_SRC: - case SC16IS7XX_IIR_XOFFI_SRC: - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - - /* - * There is a silicon bug that makes the chip report a - * time-out interrupt but no data in the FIFO. This is - * described in errata section 18.1.4. - * - * When this happens, read one byte from the FIFO to - * clear the interrupt. - */ - if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) - rxlen = 1; - - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); - break; + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; /* CTSRTS interrupt comes only when CTS goes inactive */ - case SC16IS7XX_IIR_CTSRTS_SRC: - case SC16IS7XX_IIR_MSI_SRC: - sc16is7xx_update_mlines(one); - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); - break; - default: - dev_err_ratelimited(port->dev, - "ttySC%i: Unexpected interrupt: %x", - port->line, iir); - break; - } - } while (0); + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } out_port_irq: mutex_unlock(&one->efr_lock);

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: remove obsolete loop in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ed647256e8f226241ecff7baaecdb8632ffc7ec1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012608-velcro-clanking-b6f7@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: ed647256e8f2 ("serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") e045e18dbf3e ("Merge 6.7-rc5 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:11 -0500 Subject: [PATCH] serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ced2446909a2..44a11c89c949 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) { bool rc = true; + unsigned int iir, rxlen; struct uart_port *port = &s->p[portno].port; struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); mutex_lock(&one->efr_lock); - do { - unsigned int iir, rxlen; + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) { + rc = false; + goto out_port_irq; + } - iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); - if (iir & SC16IS7XX_IIR_NO_INT_BIT) { - rc = false; - goto out_port_irq; - } + iir &= SC16IS7XX_IIR_ID_MASK; - iir &= SC16IS7XX_IIR_ID_MASK; - - switch (iir) { - case SC16IS7XX_IIR_RDI_SRC: - case SC16IS7XX_IIR_RLSE_SRC: - case SC16IS7XX_IIR_RTOI_SRC: - case SC16IS7XX_IIR_XOFFI_SRC: - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - - /* - * There is a silicon bug that makes the chip report a - * time-out interrupt but no data in the FIFO. This is - * described in errata section 18.1.4. - * - * When this happens, read one byte from the FIFO to - * clear the interrupt. - */ - if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) - rxlen = 1; - - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); - break; + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; /* CTSRTS interrupt comes only when CTS goes inactive */ - case SC16IS7XX_IIR_CTSRTS_SRC: - case SC16IS7XX_IIR_MSI_SRC: - sc16is7xx_update_mlines(one); - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); - break; - default: - dev_err_ratelimited(port->dev, - "ttySC%i: Unexpected interrupt: %x", - port->line, iir); - break; - } - } while (0); + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } out_port_irq: mutex_unlock(&one->efr_lock);

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 8a1060ce974919f2a79807527ad82ac39336eda2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012653-unframed-creation-e7d8@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: 8a1060ce9749 ("serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 41a308cbedb2 ("serial: sc16is7xx: remove unused line structure member") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported") 21144bab4f11 ("sc16is7xx: Handle modem status lines") cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") d4ab5487cc77 ("Merge 5.17-rc6 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a1060ce974919f2a79807527ad82ac39336eda2 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:08 -0500 Subject: [PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable(a)vger.kernel.org> Cc: Yury Norov <yury.norov(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e40e4a99277e..17b90f971f96 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -407,19 +407,6 @@ static void sc16is7xx_port_update(struct uart_port *port, u8 reg, regmap_update_bits(one->regmap, reg, mask, val); } -static int sc16is7xx_alloc_line(void) -{ - int i; - - BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); - - for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) - if (!test_and_set_bit(i, &sc16is7xx_lines)) - break; - - return i; -} - static void sc16is7xx_power(struct uart_port *port, int on) { sc16is7xx_port_update(port, SC16IS7XX_IER_REG, @@ -1550,6 +1537,13 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + SC16IS7XX_MAX_DEVS); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ERANGE; + goto out_ports; + } + /* Initialize port data */ s->p[i].port.dev = dev; s->p[i].port.irq = irq; @@ -1569,14 +1563,8 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.rs485_supported = sc16is7xx_rs485_supported; s->p[i].port.ops = &sc16is7xx_ops; s->p[i].old_mctrl = 0; - s->p[i].port.line = sc16is7xx_alloc_line(); s->p[i].regmap = regmaps[i]; - if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { - ret = -ENOMEM; - goto out_ports; - } - mutex_init(&s->p[i].efr_lock); ret = uart_get_rs485_mode(&s->p[i].port); @@ -1594,8 +1582,13 @@ static int sc16is7xx_probe(struct device *dev, kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); + /* Register port */ - uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + ret = uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + if (ret) + goto out_ports; + + set_bit(s->p[i].port.line, &sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1653,10 +1646,9 @@ static int sc16is7xx_probe(struct device *dev, #endif out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } + for (i = 0; i < devtype->nr_uart; i++) + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1678,8 +1670,8 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); }

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 8a1060ce974919f2a79807527ad82ac39336eda2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012652-underline-preformed-f7c0@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: 8a1060ce9749 ("serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 41a308cbedb2 ("serial: sc16is7xx: remove unused line structure member") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported") 21144bab4f11 ("sc16is7xx: Handle modem status lines") cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") d4ab5487cc77 ("Merge 5.17-rc6 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a1060ce974919f2a79807527ad82ac39336eda2 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:08 -0500 Subject: [PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable(a)vger.kernel.org> Cc: Yury Norov <yury.norov(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e40e4a99277e..17b90f971f96 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -407,19 +407,6 @@ static void sc16is7xx_port_update(struct uart_port *port, u8 reg, regmap_update_bits(one->regmap, reg, mask, val); } -static int sc16is7xx_alloc_line(void) -{ - int i; - - BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); - - for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) - if (!test_and_set_bit(i, &sc16is7xx_lines)) - break; - - return i; -} - static void sc16is7xx_power(struct uart_port *port, int on) { sc16is7xx_port_update(port, SC16IS7XX_IER_REG, @@ -1550,6 +1537,13 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + SC16IS7XX_MAX_DEVS); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ERANGE; + goto out_ports; + } + /* Initialize port data */ s->p[i].port.dev = dev; s->p[i].port.irq = irq; @@ -1569,14 +1563,8 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.rs485_supported = sc16is7xx_rs485_supported; s->p[i].port.ops = &sc16is7xx_ops; s->p[i].old_mctrl = 0; - s->p[i].port.line = sc16is7xx_alloc_line(); s->p[i].regmap = regmaps[i]; - if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { - ret = -ENOMEM; - goto out_ports; - } - mutex_init(&s->p[i].efr_lock); ret = uart_get_rs485_mode(&s->p[i].port); @@ -1594,8 +1582,13 @@ static int sc16is7xx_probe(struct device *dev, kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); + /* Register port */ - uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + ret = uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + if (ret) + goto out_ports; + + set_bit(s->p[i].port.line, &sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1653,10 +1646,9 @@ static int sc16is7xx_probe(struct device *dev, #endif out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } + for (i = 0; i < devtype->nr_uart; i++) + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1678,8 +1670,8 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); }

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 8a1060ce974919f2a79807527ad82ac39336eda2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012650-culture-bonus-603d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 8a1060ce9749 ("serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 41a308cbedb2 ("serial: sc16is7xx: remove unused line structure member") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported") 21144bab4f11 ("sc16is7xx: Handle modem status lines") cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") d4ab5487cc77 ("Merge 5.17-rc6 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a1060ce974919f2a79807527ad82ac39336eda2 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:08 -0500 Subject: [PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable(a)vger.kernel.org> Cc: Yury Norov <yury.norov(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e40e4a99277e..17b90f971f96 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -407,19 +407,6 @@ static void sc16is7xx_port_update(struct uart_port *port, u8 reg, regmap_update_bits(one->regmap, reg, mask, val); } -static int sc16is7xx_alloc_line(void) -{ - int i; - - BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); - - for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) - if (!test_and_set_bit(i, &sc16is7xx_lines)) - break; - - return i; -} - static void sc16is7xx_power(struct uart_port *port, int on) { sc16is7xx_port_update(port, SC16IS7XX_IER_REG, @@ -1550,6 +1537,13 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + SC16IS7XX_MAX_DEVS); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ERANGE; + goto out_ports; + } + /* Initialize port data */ s->p[i].port.dev = dev; s->p[i].port.irq = irq; @@ -1569,14 +1563,8 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.rs485_supported = sc16is7xx_rs485_supported; s->p[i].port.ops = &sc16is7xx_ops; s->p[i].old_mctrl = 0; - s->p[i].port.line = sc16is7xx_alloc_line(); s->p[i].regmap = regmaps[i]; - if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { - ret = -ENOMEM; - goto out_ports; - } - mutex_init(&s->p[i].efr_lock); ret = uart_get_rs485_mode(&s->p[i].port); @@ -1594,8 +1582,13 @@ static int sc16is7xx_probe(struct device *dev, kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); + /* Register port */ - uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + ret = uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + if (ret) + goto out_ports; + + set_bit(s->p[i].port.line, &sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1653,10 +1646,9 @@ static int sc16is7xx_probe(struct device *dev, #endif out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } + for (i = 0; i < devtype->nr_uart; i++) + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1678,8 +1670,8 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); }

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 8a1060ce974919f2a79807527ad82ac39336eda2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012649-autistic-cusp-6331@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 8a1060ce9749 ("serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 41a308cbedb2 ("serial: sc16is7xx: remove unused line structure member") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported") 21144bab4f11 ("sc16is7xx: Handle modem status lines") cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") d4ab5487cc77 ("Merge 5.17-rc6 into tty-next") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8a1060ce974919f2a79807527ad82ac39336eda2 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:08 -0500 Subject: [PATCH] serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable(a)vger.kernel.org> Cc: Yury Norov <yury.norov(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e40e4a99277e..17b90f971f96 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -407,19 +407,6 @@ static void sc16is7xx_port_update(struct uart_port *port, u8 reg, regmap_update_bits(one->regmap, reg, mask, val); } -static int sc16is7xx_alloc_line(void) -{ - int i; - - BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); - - for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) - if (!test_and_set_bit(i, &sc16is7xx_lines)) - break; - - return i; -} - static void sc16is7xx_power(struct uart_port *port, int on) { sc16is7xx_port_update(port, SC16IS7XX_IER_REG, @@ -1550,6 +1537,13 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + SC16IS7XX_MAX_DEVS); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ERANGE; + goto out_ports; + } + /* Initialize port data */ s->p[i].port.dev = dev; s->p[i].port.irq = irq; @@ -1569,14 +1563,8 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.rs485_supported = sc16is7xx_rs485_supported; s->p[i].port.ops = &sc16is7xx_ops; s->p[i].old_mctrl = 0; - s->p[i].port.line = sc16is7xx_alloc_line(); s->p[i].regmap = regmaps[i]; - if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { - ret = -ENOMEM; - goto out_ports; - } - mutex_init(&s->p[i].efr_lock); ret = uart_get_rs485_mode(&s->p[i].port); @@ -1594,8 +1582,13 @@ static int sc16is7xx_probe(struct device *dev, kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); + /* Register port */ - uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + ret = uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + if (ret) + goto out_ports; + + set_bit(s->p[i].port.line, &sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1653,10 +1646,9 @@ static int sc16is7xx_probe(struct device *dev, #endif out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } + for (i = 0; i < devtype->nr_uart; i++) + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1678,8 +1670,8 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); }

1 year, 9 months

1
0
0 0

FAILED: patch "[PATCH] serial: sc16is7xx: fix unconditional activation of THRI" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 9915753037eba7135b209fef4f2afeca841af816 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024012623-gray-panorama-6f95@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt") 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels") 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") b465848be8a6 ("serial: sc16is7xx: Use port lock wrappers") b4a778303ea0 ("serial: sc16is7xx: add missing support for rs485 devicetree properties") 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") dabc54a45711 ("serial: sc16is7xx: remove obsolete out_thread label") c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9915753037eba7135b209fef4f2afeca841af816 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Mon, 11 Dec 2023 12:13:53 -0500 Subject: [PATCH] serial: sc16is7xx: fix unconditional activation of THRI interrupt Commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") changed behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc(). For example when sending a 65 bytes message, and assuming the Tx FIFO is initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When the THRI IRQ is fired, the driver will write the remaining byte of the message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx(). When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2 bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling THRI. After sc16is7xx_handle_tx() exits, control returns to sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ is fired, the driver simply acknowledges the interrupt and does nothing more, since all the data has already been written to the FIFO. This results in 2 register writes and 4 register reads all for nothing and taking precious cycles from the I2C/SPI bus. Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to its maximum capacity and there are remaining bytes to send in the message. Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") Cc: <stable(a)vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7e4b9b52841d..e40e4a99277e 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -687,6 +687,8 @@ static void sc16is7xx_handle_tx(struct uart_port *port) if (uart_circ_empty(xmit)) sc16is7xx_stop_tx(port); + else + sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT); uart_port_unlock_irqrestore(port, flags); } @@ -815,7 +817,6 @@ static void sc16is7xx_tx_proc(struct kthread_work *ws) { struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - unsigned long flags; if ((port->rs485.flags & SER_RS485_ENABLED) && (port->rs485.delay_rts_before_send > 0)) @@ -824,10 +825,6 @@ static void sc16is7xx_tx_proc(struct kthread_work *ws) mutex_lock(&one->efr_lock); sc16is7xx_handle_tx(port); mutex_unlock(&one->efr_lock); - - uart_port_lock_irqsave(port, &flags); - sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT); - uart_port_unlock_irqrestore(port, flags); } static void sc16is7xx_reconf_rs485(struct uart_port *port)

1 year, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2024