August 2023 - Linux-stable-mirror

[PATCH v3] tpm: Enable hwrng only for Pluton on AMD CPUs

by Jarkko Sakkinen

The vendor check introduced by commit 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs") doesn't work properly on a number of Intel fTPMs. On the reported systems the TPM doesn't reply at bootup and returns back the command code. This makes the TPM fail probe. Since only Microsoft Pluton is the only known combination of AMD CPU and fTPM from other vendor, disable hwrng otherwise. In order to make sysadmin aware of this, print also info message to the klog. Cc: stable(a)vger.kernel.org Fixes: 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs") Reported-by: Todd Brandt <todd.e.brandt(a)intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217804 Signed-off-by: Jarkko Sakkinen <jarkko(a)kernel.org> --- v3: * Forgot to amend config flags. v2: * CONFIG_X86 * Removed "Reviewed-by: Jarkko Sakkinen <jarkko(a)kernel.org>" * Removed "Signed-off-by: Mario Limonciello <mario.limonciello(a)amd.com>" --- drivers/char/tpm/tpm_crb.c | 33 ++++++++------------------------- 1 file changed, 8 insertions(+), 25 deletions(-) diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index 65ff4d2fbe8d..ea085b14ab7c 100644 --- a/drivers/char/tpm/tpm_crb.c +++ b/drivers/char/tpm/tpm_crb.c @@ -463,28 +463,6 @@ static bool crb_req_canceled(struct tpm_chip *chip, u8 status) return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE; } -static int crb_check_flags(struct tpm_chip *chip) -{ - u32 val; - int ret; - - ret = crb_request_locality(chip, 0); - if (ret) - return ret; - - ret = tpm2_get_tpm_pt(chip, TPM2_PT_MANUFACTURER, &val, NULL); - if (ret) - goto release; - - if (val == 0x414D4400U /* AMD */) - chip->flags |= TPM_CHIP_FLAG_HWRNG_DISABLED; - -release: - crb_relinquish_locality(chip, 0); - - return ret; -} - static const struct tpm_class_ops tpm_crb = { .flags = TPM_OPS_AUTO_STARTUP, .status = crb_status, @@ -827,9 +805,14 @@ static int crb_acpi_add(struct acpi_device *device) if (rc) goto out; - rc = crb_check_flags(chip); - if (rc) - goto out; +#ifdef CONFIG_X86 + /* A quirk for https://www.amd.com/en/support/kb/faq/pa-410 */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + priv->sm != ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) { + dev_info(dev, "Disabling hwrng\n"); + chip->flags |= TPM_CHIP_FLAG_HWRNG_DISABLED; + } +#endif /* CONFIG_X86 */ rc = tpm_chip_register(chip); -- 2.39.2

1 year, 3 months

7
21
0 0

[PATCH v7 0/4] kexec: Fix kexec_file_load for llvm16 with PGO

by Ricardo Ribalda

When upreving llvm I realised that kexec stopped working on my test platform. The reason seems to be that due to PGO there are multiple .text sections on the purgatory, and kexec does not supports that. Signed-off-by: Ricardo Ribalda <ribalda(a)chromium.org> --- Changes in v7: - Fix $SUBJECT of riscv patch - Rename PGO as Profile-guided optimization - Link to v6: https://lore.kernel.org/r/20230321-kexec_clang16-v6-0-a2255e81ab45@chromium… Changes in v6: - Replace linker script with Makefile rule. Thanks Nick - Link to v5: https://lore.kernel.org/r/20230321-kexec_clang16-v5-0-5563bf7c4173@chromium… Changes in v5: - Add warning when multiple text sections are found. Thanks Simon! - Add Fixes tag. - Link to v4: https://lore.kernel.org/r/20230321-kexec_clang16-v4-0-1340518f98e9@chromium… Changes in v4: - Add Cc: stable - Add linker script for x86 - Add a warning when the kernel image has overlapping sections. - Link to v3: https://lore.kernel.org/r/20230321-kexec_clang16-v3-0-5f016c8d0e87@chromium… Changes in v3: - Fix initial value. Thanks Ross! - Link to v2: https://lore.kernel.org/r/20230321-kexec_clang16-v2-0-d10e5d517869@chromium… Changes in v2: - Fix if condition. Thanks Steven!. - Update Philipp email. Thanks Baoquan. - Link to v1: https://lore.kernel.org/r/20230321-kexec_clang16-v1-0-a768fc2c7c4d@chromium… --- Ricardo Ribalda (4): kexec: Support purgatories with .text.hot sections x86/purgatory: Remove PGO flags powerpc/purgatory: Remove PGO flags riscv/purgatory: Remove PGO flags arch/powerpc/purgatory/Makefile | 5 +++++ arch/riscv/purgatory/Makefile | 5 +++++ arch/x86/purgatory/Makefile | 5 +++++ kernel/kexec_file.c | 14 +++++++++++++- 4 files changed, 28 insertions(+), 1 deletion(-) --- base-commit: 58390c8ce1bddb6c623f62e7ed36383e7fa5c02f change-id: 20230321-kexec_clang16-4510c23d129c Best regards, -- Ricardo Ribalda Delgado <ribalda(a)chromium.org>

1 year, 3 months

3
10
0 0

FAILED: patch "[PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C" failed to apply to 6.5-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.5.y git checkout FETCH_HEAD git cherry-pick -x bd003fb338afee97c76f13c3e9144a7e4ad37179 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023083021-unease-catfish-92ad@gregkh' --subject-prefix 'PATCH 6.5.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From bd003fb338afee97c76f13c3e9144a7e4ad37179 Mon Sep 17 00:00:00 2001 From: Max Chou <max.chou(a)realtek.com> Date: Mon, 7 Aug 2023 19:42:59 +0800 Subject: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C In this commit, prefer to load FW v2 if available. Fallback to FW v1 otherwise. This behavior is only for RTL8852C. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Cc: stable(a)vger.kernel.org Suggested-by: Juerg Haefliger <juerg.haefliger(a)canonical.com> Tested-by: Hilda Wu <hildawu(a)realtek.com> Signed-off-by: Max Chou <max.chou(a)realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index ddae6524106d..84c2c2e1122f 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB), .config_needed = false, .has_rom_version = false, - .fw_name = "rtl_bt/rtl8723a_fw.bin", + .fw_name = "rtl_bt/rtl8723a_fw", .cfg_name = NULL, .hw_info = "rtl8723au" }, @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723bs_fw.bin", + .fw_name = "rtl_bt/rtl8723bs_fw", .cfg_name = "rtl_bt/rtl8723bs_config", .hw_info = "rtl8723bs" }, @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723b_fw.bin", + .fw_name = "rtl_bt/rtl8723b_fw", .cfg_name = "rtl_bt/rtl8723b_config", .hw_info = "rtl8723bu" }, @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_cg_fw", .cfg_name = "rtl_bt/rtl8723cs_cg_config", .hw_info = "rtl8723cs-cg" }, @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_vf_fw", .cfg_name = "rtl_bt/rtl8723cs_vf_config", .hw_info = "rtl8723cs-vf" }, @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_xx_fw", .cfg_name = "rtl_bt/rtl8723cs_xx_config", .hw_info = "rtl8723cs" }, @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723d_fw.bin", + .fw_name = "rtl_bt/rtl8723d_fw", .cfg_name = "rtl_bt/rtl8723d_config", .hw_info = "rtl8723du" }, @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723ds_fw.bin", + .fw_name = "rtl_bt/rtl8723ds_fw", .cfg_name = "rtl_bt/rtl8723ds_config", .hw_info = "rtl8723ds" }, @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8821a_fw.bin", + .fw_name = "rtl_bt/rtl8821a_fw", .cfg_name = "rtl_bt/rtl8821a_config", .hw_info = "rtl8821au" }, @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8821c_fw.bin", + .fw_name = "rtl_bt/rtl8821c_fw", .cfg_name = "rtl_bt/rtl8821c_config", .hw_info = "rtl8821cu" }, @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8821cs_fw.bin", + .fw_name = "rtl_bt/rtl8821cs_fw", .cfg_name = "rtl_bt/rtl8821cs_config", .hw_info = "rtl8821cs" }, @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8761a_fw.bin", + .fw_name = "rtl_bt/rtl8761a_fw", .cfg_name = "rtl_bt/rtl8761a_config", .hw_info = "rtl8761au" }, @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8761b_fw.bin", + .fw_name = "rtl_bt/rtl8761b_fw", .cfg_name = "rtl_bt/rtl8761b_config", .hw_info = "rtl8761btv" }, @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8761bu_fw.bin", + .fw_name = "rtl_bt/rtl8761bu_fw", .cfg_name = "rtl_bt/rtl8761bu_config", .hw_info = "rtl8761bu" }, @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cs_fw.bin", + .fw_name = "rtl_bt/rtl8822cs_fw", .cfg_name = "rtl_bt/rtl8822cs_config", .hw_info = "rtl8822cs" }, @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cs_fw.bin", + .fw_name = "rtl_bt/rtl8822cs_fw", .cfg_name = "rtl_bt/rtl8822cs_config", .hw_info = "rtl8822cs" }, @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cu_fw.bin", + .fw_name = "rtl_bt/rtl8822cu_fw", .cfg_name = "rtl_bt/rtl8822cu_config", .hw_info = "rtl8822cu" }, @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822b_fw.bin", + .fw_name = "rtl_bt/rtl8822b_fw", .cfg_name = "rtl_bt/rtl8822b_config", .hw_info = "rtl8822bu" }, @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852au_fw.bin", + .fw_name = "rtl_bt/rtl8852au_fw", .cfg_name = "rtl_bt/rtl8852au_config", .hw_info = "rtl8852au" }, @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852bs_fw.bin", + .fw_name = "rtl_bt/rtl8852bs_fw", .cfg_name = "rtl_bt/rtl8852bs_config", .hw_info = "rtl8852bs" }, @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852bu_fw.bin", + .fw_name = "rtl_bt/rtl8852bu_fw", .cfg_name = "rtl_bt/rtl8852bu_config", .hw_info = "rtl8852bu" }, @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852cu_fw.bin", + .fw_name = "rtl_bt/rtl8852cu_fw", .cfg_name = "rtl_bt/rtl8852cu_config", .hw_info = "rtl8852cu" }, @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = false, - .fw_name = "rtl_bt/rtl8851bu_fw.bin", + .fw_name = "rtl_bt/rtl8851bu_fw", .cfg_name = "rtl_bt/rtl8851bu_config", .hw_info = "rtl8851bu" }, }; @@ -1045,6 +1045,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, struct sk_buff *skb; struct hci_rp_read_local_version *resp; struct hci_command_hdr *cmd; + char fw_name[40]; char cfg_name[40]; u16 hci_rev, lmp_subver; u8 hci_ver, lmp_ver, chip_type = 0; @@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, goto err_free; } - btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name, - &btrtl_dev->fw_data); + if (!btrtl_dev->ic_info->fw_name) { + ret = -ENOMEM; + goto err_free; + } + + btrtl_dev->fw_len = -EIO; + if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) { + snprintf(fw_name, sizeof(fw_name), "%s_v2.bin", + btrtl_dev->ic_info->fw_name); + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, + &btrtl_dev->fw_data); + } + + if (btrtl_dev->fw_len < 0) { + snprintf(fw_name, sizeof(fw_name), "%s.bin", + btrtl_dev->ic_info->fw_name); + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, + &btrtl_dev->fw_data); + } + if (btrtl_dev->fw_len < 0) { rtl_dev_err(hdev, "firmware file %s not found", btrtl_dev->ic_info->fw_name); @@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

1 year, 3 months

3
3
0 0

[PATCH v2 1/2] nvme: fix memory corruption for passthrough metadata

by Kanchan Joshi

User can specify a smaller meta buffer than what the device is wired to update/access. This may lead to Device doing a larger DMA operation, overwriting unrelated kernel memory. Detect this situation for uring passthrough, and bail out. Fixes: 456cba386e94 ("nvme: wire-up uring-cmd support for io-passthru on char-device") Cc: stable(a)vger.kernel.org Reported-by: Vincent Fu <vincent.fu(a)samsung.com> Signed-off-by: Kanchan Joshi <joshi.k(a)samsung.com> --- drivers/nvme/host/ioctl.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 19a5177bc360..717c7effaf8a 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -320,6 +320,35 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio) meta_len, lower_32_bits(io.slba), NULL, 0, 0); } +static bool nvme_validate_passthru_meta(struct nvme_ctrl *ctrl, + struct nvme_ns *ns, + struct nvme_command *c, + __u64 meta, __u32 meta_len) +{ + /* + * User may specify smaller meta-buffer with a larger data-buffer. + * Driver allocated meta buffer will also be small. + * Device can do larger dma into that, overwriting unrelated kernel + * memory. + */ + if (ns && (meta_len || meta)) { + u16 nlb = lower_16_bits(le32_to_cpu(c->common.cdw12)); + u16 control = upper_16_bits(le32_to_cpu(c->common.cdw12)); + + /* meta transfer from/to host is not done */ + if (control & NVME_RW_PRINFO_PRACT && ns->ms == ns->pi_size) + return true; + + if (meta_len != (nlb + 1) * ns->ms) { + dev_err(ctrl->device, + "%s: metadata length does not match!\n", current->comm); + return false; + } + } + + return true; +} + static bool nvme_validate_passthru_nsid(struct nvme_ctrl *ctrl, struct nvme_ns *ns, __u32 nsid) { @@ -593,6 +622,10 @@ static int nvme_uring_cmd_io(struct nvme_ctrl *ctrl, struct nvme_ns *ns, d.metadata_len = READ_ONCE(cmd->metadata_len); d.timeout_ms = READ_ONCE(cmd->timeout_ms); + if (!nvme_validate_passthru_meta(ctrl, ns, &c, d.metadata, + d.metadata_len)) + return -EINVAL; + if (issue_flags & IO_URING_F_NONBLOCK) { rq_flags |= REQ_NOWAIT; blk_flags = BLK_MQ_REQ_NOWAIT; -- 2.25.1

1 year, 3 months

5
8
0 0

[PATCH 1/4] arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB

by Macpaul Lin

The onboard dram of mt8195-demo board is 8GB. Cc: stable(a)vger.kernel.org # 6.1, 6.4 Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board") Signed-off-by: Macpaul Lin <macpaul.lin(a)mediatek.com> --- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index b2485ddfd33b..ff363ab925e9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -48,7 +48,7 @@ memory@40000000 { device_type = "memory"; - reg = <0 0x40000000 0 0x80000000>; + reg = <0 0x40000000 0x2 0x00000000>; }; reserved-memory { -- 2.18.0

1 year, 3 months

2
9
0 0

[PATCH AUTOSEL 6.1 01/15] wifi: cfg80211: remove links only on AP

by Sasha Levin

From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 34d4e3eb67fed9c19719bedb748e5a8b6ccc97a5 ] Since links are only controlled by userspace via cfg80211 in AP mode, also only remove them from the driver in that case. Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Gregory Greenman <gregory.greenman(a)intel.com> Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30… Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- net/wireless/util.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index 39680e7bad45a..f433f3fdd9e94 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -5,7 +5,7 @@ * Copyright 2007-2009 Johannes Berg <johannes(a)sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright 2017 Intel Deutschland GmbH - * Copyright (C) 2018-2022 Intel Corporation + * Copyright (C) 2018-2023 Intel Corporation */ #include <linux/export.h> #include <linux/bitops.h> @@ -2479,6 +2479,13 @@ void cfg80211_remove_links(struct wireless_dev *wdev) { unsigned int link_id; + /* + * links are controlled by upper layers (userspace/cfg) + * only for AP mode, so only remove them here for AP + */ + if (wdev->iftype != NL80211_IFTYPE_AP) + return; + wdev_lock(wdev); if (wdev->valid_links) { for_each_valid_link(wdev, link_id) -- 2.40.1

1 year, 3 months

2
15
0 0

[PATCH net] net: stmmac: remove unneeded stmmac_poll_controller

by Remi Pommarel

Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable(a)vger.kernel.org> # 5.15.x Signed-off-by: Remi Pommarel <repk(a)triplefau.lt> --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 30 ------------------- 1 file changed, 30 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 4727f7be4f86..9b5c0ebf0519 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -5938,33 +5938,6 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data) return IRQ_HANDLED; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* Polling receive - used by NETCONSOLE and other diagnostic tools - * to allow network I/O with interrupts disabled. - */ -static void stmmac_poll_controller(struct net_device *dev) -{ - struct stmmac_priv *priv = netdev_priv(dev); - int i; - - /* If adapter is down, do nothing */ - if (test_bit(STMMAC_DOWN, &priv->state)) - return; - - if (priv->plat->multi_msi_en) { - for (i = 0; i < priv->plat->rx_queues_to_use; i++) - stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]); - - for (i = 0; i < priv->plat->tx_queues_to_use; i++) - stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]); - } else { - disable_irq(dev->irq); - stmmac_interrupt(dev->irq, dev); - enable_irq(dev->irq); - } -} -#endif - /** * stmmac_ioctl - Entry point for the Ioctl * @dev: Device pointer. @@ -6800,9 +6773,6 @@ static const struct net_device_ops stmmac_netdev_ops = { .ndo_eth_ioctl = stmmac_ioctl, .ndo_setup_tc = stmmac_setup_tc, .ndo_select_queue = stmmac_select_queue, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = stmmac_poll_controller, -#endif .ndo_set_mac_address = stmmac_set_mac_address, .ndo_vlan_rx_add_vid = stmmac_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = stmmac_vlan_rx_kill_vid, -- 2.40.0

1 year, 3 months

2
2
0 0

FAILED: patch "[PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C" failed to apply to 6.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.4.y git checkout FETCH_HEAD git cherry-pick -x bd003fb338afee97c76f13c3e9144a7e4ad37179 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023083022-salvage-resume-3b5d@gregkh' --subject-prefix 'PATCH 6.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From bd003fb338afee97c76f13c3e9144a7e4ad37179 Mon Sep 17 00:00:00 2001 From: Max Chou <max.chou(a)realtek.com> Date: Mon, 7 Aug 2023 19:42:59 +0800 Subject: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C In this commit, prefer to load FW v2 if available. Fallback to FW v1 otherwise. This behavior is only for RTL8852C. Fixes: 9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support") Cc: stable(a)vger.kernel.org Suggested-by: Juerg Haefliger <juerg.haefliger(a)canonical.com> Tested-by: Hilda Wu <hildawu(a)realtek.com> Signed-off-by: Max Chou <max.chou(a)realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index ddae6524106d..84c2c2e1122f 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB), .config_needed = false, .has_rom_version = false, - .fw_name = "rtl_bt/rtl8723a_fw.bin", + .fw_name = "rtl_bt/rtl8723a_fw", .cfg_name = NULL, .hw_info = "rtl8723au" }, @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723bs_fw.bin", + .fw_name = "rtl_bt/rtl8723bs_fw", .cfg_name = "rtl_bt/rtl8723bs_config", .hw_info = "rtl8723bs" }, @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723b_fw.bin", + .fw_name = "rtl_bt/rtl8723b_fw", .cfg_name = "rtl_bt/rtl8723b_config", .hw_info = "rtl8723bu" }, @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_cg_fw", .cfg_name = "rtl_bt/rtl8723cs_cg_config", .hw_info = "rtl8723cs-cg" }, @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_vf_fw", .cfg_name = "rtl_bt/rtl8723cs_vf_config", .hw_info = "rtl8723cs-vf" }, @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = { .hci_bus = HCI_UART, .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin", + .fw_name = "rtl_bt/rtl8723cs_xx_fw", .cfg_name = "rtl_bt/rtl8723cs_xx_config", .hw_info = "rtl8723cs" }, @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723d_fw.bin", + .fw_name = "rtl_bt/rtl8723d_fw", .cfg_name = "rtl_bt/rtl8723d_config", .hw_info = "rtl8723du" }, @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART), .config_needed = true, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8723ds_fw.bin", + .fw_name = "rtl_bt/rtl8723ds_fw", .cfg_name = "rtl_bt/rtl8723ds_config", .hw_info = "rtl8723ds" }, @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8821a_fw.bin", + .fw_name = "rtl_bt/rtl8821a_fw", .cfg_name = "rtl_bt/rtl8821a_config", .hw_info = "rtl8821au" }, @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8821c_fw.bin", + .fw_name = "rtl_bt/rtl8821c_fw", .cfg_name = "rtl_bt/rtl8821c_config", .hw_info = "rtl8821cu" }, @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8821cs_fw.bin", + .fw_name = "rtl_bt/rtl8821cs_fw", .cfg_name = "rtl_bt/rtl8821cs_config", .hw_info = "rtl8821cs" }, @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8761a_fw.bin", + .fw_name = "rtl_bt/rtl8761a_fw", .cfg_name = "rtl_bt/rtl8761a_config", .hw_info = "rtl8761au" }, @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8761b_fw.bin", + .fw_name = "rtl_bt/rtl8761b_fw", .cfg_name = "rtl_bt/rtl8761b_config", .hw_info = "rtl8761btv" }, @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = { { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB), .config_needed = false, .has_rom_version = true, - .fw_name = "rtl_bt/rtl8761bu_fw.bin", + .fw_name = "rtl_bt/rtl8761bu_fw", .cfg_name = "rtl_bt/rtl8761bu_config", .hw_info = "rtl8761bu" }, @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cs_fw.bin", + .fw_name = "rtl_bt/rtl8822cs_fw", .cfg_name = "rtl_bt/rtl8822cs_config", .hw_info = "rtl8822cs" }, @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cs_fw.bin", + .fw_name = "rtl_bt/rtl8822cs_fw", .cfg_name = "rtl_bt/rtl8822cs_config", .hw_info = "rtl8822cs" }, @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822cu_fw.bin", + .fw_name = "rtl_bt/rtl8822cu_fw", .cfg_name = "rtl_bt/rtl8822cu_config", .hw_info = "rtl8822cu" }, @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8822b_fw.bin", + .fw_name = "rtl_bt/rtl8822b_fw", .cfg_name = "rtl_bt/rtl8822b_config", .hw_info = "rtl8822bu" }, @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852au_fw.bin", + .fw_name = "rtl_bt/rtl8852au_fw", .cfg_name = "rtl_bt/rtl8852au_config", .hw_info = "rtl8852au" }, @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = { .config_needed = true, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852bs_fw.bin", + .fw_name = "rtl_bt/rtl8852bs_fw", .cfg_name = "rtl_bt/rtl8852bs_config", .hw_info = "rtl8852bs" }, @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852bu_fw.bin", + .fw_name = "rtl_bt/rtl8852bu_fw", .cfg_name = "rtl_bt/rtl8852bu_config", .hw_info = "rtl8852bu" }, @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = true, - .fw_name = "rtl_bt/rtl8852cu_fw.bin", + .fw_name = "rtl_bt/rtl8852cu_fw", .cfg_name = "rtl_bt/rtl8852cu_config", .hw_info = "rtl8852cu" }, @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = { .config_needed = false, .has_rom_version = true, .has_msft_ext = false, - .fw_name = "rtl_bt/rtl8851bu_fw.bin", + .fw_name = "rtl_bt/rtl8851bu_fw", .cfg_name = "rtl_bt/rtl8851bu_config", .hw_info = "rtl8851bu" }, }; @@ -1045,6 +1045,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, struct sk_buff *skb; struct hci_rp_read_local_version *resp; struct hci_command_hdr *cmd; + char fw_name[40]; char cfg_name[40]; u16 hci_rev, lmp_subver; u8 hci_ver, lmp_ver, chip_type = 0; @@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, goto err_free; } - btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name, - &btrtl_dev->fw_data); + if (!btrtl_dev->ic_info->fw_name) { + ret = -ENOMEM; + goto err_free; + } + + btrtl_dev->fw_len = -EIO; + if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) { + snprintf(fw_name, sizeof(fw_name), "%s_v2.bin", + btrtl_dev->ic_info->fw_name); + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, + &btrtl_dev->fw_data); + } + + if (btrtl_dev->fw_len < 0) { + snprintf(fw_name, sizeof(fw_name), "%s.bin", + btrtl_dev->ic_info->fw_name); + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name, + &btrtl_dev->fw_data); + } + if (btrtl_dev->fw_len < 0) { rtl_dev_err(hdev, "firmware file %s not found", btrtl_dev->ic_info->fw_name); @@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

1 year, 3 months

2
1
0 0

[PATCH v2 0/5] memfd: cleanups for vm.memfd_noexec

by Aleksa Sarai

The most critical issue with vm.memfd_noexec=2 (the fact that passing MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's tree[2], but there are still some outstanding issues that need to be addressed: * vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls because it will make it far to difficult to ever migrate. Instead it should imply MFD_EXEC. * The dmesg warnings are pr_warn_once(), which on most systems means that they will be used up by systemd or some other boot process and userspace developers will never see it. - For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a rate-limited message to the kernel log is necessary to tell userspace that they should add the new flags. Arguably the most ideal way to deal with the spam concern[3,4] while still prompting userspace to switch to the new flags would be to only log the warning once per task or something similar. However, adding something to task_struct for tracking this would be needless bloat for a single pr_warn_ratelimited(). So just switch to pr_info_ratelimited() to avoid spamming the log with something that isn't a real warning. There's lots of info-level stuff in dmesg, it seems really unlikely that this should be an actual problem. Most programs are already switching to the new flags anyway. - For the vm.memfd_noexec=2 case, we need to log a warning for every failure because otherwise userspace will have no idea why their previously working program started returning -EACCES (previously -EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here. * The racheting mechanism for vm.memfd_noexec makes it incredibly unappealing for most users to enable the sysctl because enabling it on &init_pid_ns means you need a system reboot to unset it. Given the actual security threat being protected against, CAP_SYS_ADMIN users being restricted in this way makes little sense. The argument for this ratcheting by the original author was that it allows you to have a hierarchical setting that cannot be unset by child pidnses, but this is not accurate -- changing the parent pidns's vm.memfd_noexec setting to be more restrictive didn't affect children. Instead, switch the vm.memfd_noexec sysctl to be properly hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning userns) to lower the setting as long as it is not lower than the parent's effective setting. This change also makes it so that changing a parent pidns's vm.memfd_noexec will affect all descendants, providing a properly hierarchical setting. The performance impact of this is incredibly minimal since the maximum depth of pidns is 32 and it is only checked during memfd_create(2) and unshare(CLONE_NEWPID). * The memfd selftests would not exit with a non-zero error code when certain tests that ran in a forked process (specifically the ones related to MFD_EXEC and MFD_NOEXEC_SEAL) failed. [1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/ [2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/ [3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/ [4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundatio… Signed-off-by: Aleksa Sarai <cyphar(a)cyphar.com> --- Changes in v2: - Make vm.memfd_noexec restrictions properly hierarchical. - Allow vm.memfd_noexec setting to be lowered by CAP_SYS_ADMIN as long as it is not lower than the parent's effective setting. - Fix the logging behaviour related to the new flags and vm.memfd_noexec=2. - Add more thorough tests for vm.memfd_noexec in selftests. - v1: <https://lore.kernel.org/r/20230713143406.14342-1-cyphar@cyphar.com> --- Aleksa Sarai (5): selftests: memfd: error out test process when child test fails memfd: do not -EACCES old memfd_create() users with vm.memfd_noexec=2 memfd: improve userspace warnings for missing exec-related flags memfd: replace ratcheting feature from vm.memfd_noexec with hierarchy selftests: improve vm.memfd_noexec sysctl tests include/linux/pid_namespace.h | 39 ++-- kernel/pid.c | 3 + kernel/pid_namespace.c | 6 +- kernel/pid_sysctl.h | 28 ++- mm/memfd.c | 33 ++- tools/testing/selftests/memfd/memfd_test.c | 332 +++++++++++++++++++++++------ 6 files changed, 322 insertions(+), 119 deletions(-) --- base-commit: 3ff995246e801ea4de0a30860a1d8da4aeb538e7 change-id: 20230803-memfd-vm-noexec-uapi-fixes-ace725c67b0f Best regards, -- Aleksa Sarai <cyphar(a)cyphar.com>

1 year, 3 months

8
18
0 0

Don't fill the kernel log with memfd_create messages

by Alex Xu (Hello71)

Hi all, Recently "memfd: improve userspace warnings for missing exec-related flags" was merged. On my system, this is a regression, not an improvement, because the entire 256k kernel log buffer (default on x86) is filled with these warnings and "__do_sys_memfd_create: 122 callbacks suppressed". I haven't investigated too closely, but the most likely cause is Wayland libraries. This is too serious of a consequence for using an old API, especially considering how recently the flags were added. The vast majority of software has not had time to add the flags: glibc does not define the macros until 2.38 which was released less than one month ago, man-pages does not document the flags, and according to Debian Code Search, only systemd, stress-ng, and strace actually pass either of these flags. Furthermore, since old kernels reject unknown flags, it's not just a matter of defining and passing the flag; every program needs to add logic to handle EINVAL and try again. Some other way needs to be found to encourage userspace to add the flags; otherwise, this message will be patched out because the kernel log becomes unusable after running unupdated programs, which will still exist even after upstreams are fixed. In particular, AppImages, flatpaks, snaps, and similar app bundles contain vendored Wayland libraries which can be difficult or impossible to update. Thanks, Alex.

1 year, 3 months

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror August 2023