check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable(a)vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
---
drivers/media/platform/qcom/camss/camss-vfe.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 938f373bcd1fd..b021f81cef123 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -535,7 +535,8 @@ static int vfe_check_clock_rates(struct vfe_device *vfe)
struct camss_clock *clock = &vfe->clock[i];
if (!strcmp(clock->name, "vfe0") ||
- !strcmp(clock->name, "vfe1")) {
+ !strcmp(clock->name, "vfe1") ||
+ !strcmp(clock->name, "vfe_lite")) {
u64 min_rate = 0;
unsigned long rate;
--
2.41.0
There are two problems with the current vfe_disable_output() routine.
Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.
Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.
Rewrite the vfe_disable_output() routine to
- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0
remembering to hold the spinlock when we do so followed by
- Reset the VFE
Testing on sc8280xp and sdm845 shows this to be a valid fix.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable(a)vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org>
---
.../media/platform/qcom/camss/camss-vfe-170.c | 22 +++----------------
1 file changed, 3 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 02494c89da91c..168baaa80d4e6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -7,7 +7,6 @@
* Copyright (C) 2020-2021 Linaro Ltd.
*/
-#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -494,35 +493,20 @@ static int vfe_enable_output(struct vfe_line *line)
return 0;
}
-static int vfe_disable_output(struct vfe_line *line)
+static void vfe_disable_output(struct vfe_line *line)
{
struct vfe_device *vfe = to_vfe(line);
struct vfe_output *output = &line->output;
unsigned long flags;
unsigned int i;
- bool done;
- int timeout = 0;
-
- do {
- spin_lock_irqsave(&vfe->output_lock, flags);
- done = !output->gen2.active_num;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- usleep_range(10000, 20000);
-
- if (timeout++ == 100) {
- dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
- vfe_reset(vfe);
- output->gen2.active_num = 0;
- return 0;
- }
- } while (!done);
spin_lock_irqsave(&vfe->output_lock, flags);
for (i = 0; i < output->wm_num; i++)
vfe_wm_stop(vfe, output->wm_idx[i]);
+ output->gen2.active_num = 0;
spin_unlock_irqrestore(&vfe->output_lock, flags);
- return 0;
+ vfe_reset(vfe);
}
/*
--
2.41.0
We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().
Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.
In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.
Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable(a)vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue(a)linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com>
---
drivers/media/platform/qcom/camss/camss.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index f11dc59135a5a..75991d849b571 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1619,6 +1619,12 @@ static int camss_probe(struct platform_device *pdev)
if (ret < 0)
goto err_cleanup;
+ ret = camss_configure_pd(camss);
+ if (ret < 0) {
+ dev_err(dev, "Failed to configure power domains: %d\n", ret);
+ goto err_cleanup;
+ }
+
ret = camss_init_subdevices(camss);
if (ret < 0)
goto err_cleanup;
@@ -1678,12 +1684,6 @@ static int camss_probe(struct platform_device *pdev)
}
}
- ret = camss_configure_pd(camss);
- if (ret < 0) {
- dev_err(dev, "Failed to configure power domains: %d\n", ret);
- return ret;
- }
-
pm_runtime_enable(dev);
return 0;
--
2.41.0