July 2023 - Linux-stable-mirror

[PATCH] firmware: arm_scmi: drop OF node reference in smc_chan_setup

by Krzysztof Kozlowski

The OF node reference obtained from of_parse_phandle() should be dropped if node is not compatible with arm,scmi-shmem. Fixes: 507cd4d2c5eb ("firmware: arm_scmi: Add compatibility checks for shmem node") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/firmware/arm_scmi/smc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c index 621c37efe3ec..2d8c510fbf52 100644 --- a/drivers/firmware/arm_scmi/smc.c +++ b/drivers/firmware/arm_scmi/smc.c @@ -137,8 +137,10 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, return -ENOMEM; np = of_parse_phandle(cdev->of_node, "shmem", 0); - if (!of_device_is_compatible(np, "arm,scmi-shmem")) + if (!of_device_is_compatible(np, "arm,scmi-shmem")) { + of_node_put(np); return -ENXIO; + } ret = of_address_to_resource(np, 0, &res); of_node_put(np); -- 2.34.1

1 year, 9 months

1
0
0 0

[PATCH v5] mtd: spi-nor: Correct flags for Winbond w25q128

by Linus Walleij

The Winbond "w25q128" (actual vendor name W25Q128JV) has exactly the same flags as the sibling device "w25q128jv". The devices both require unlocking to enable write access. The actual product naming between devices vs the Linux strings in winbond.c: 0xef4018: "w25q128" W25Q128JV-IN/IQ/JQ 0xef7018: "w25q128jv" W25Q128JV-IM/JM The latter device, "w25q128jv" supports features named DTQ and QPI, otherwise it is the same. Not having the right flags has the annoying side effect that write access does not work. After this patch I can write to the flash on the Inteno XG6846 router. The flash memory also supports dual and quad SPI modes. This does not currently manifest, but by turning on SFDP parsing, the right SPI modes are emitted in /sys/kernel/debug/spi-nor/spi1.0/capabilities for this chip, so we also turn on this. Since we now have determined that SFDP parsing works on the device, we also detect the geometry using SFDP. After this dmesg and sysfs says: [ 1.062401] spi-nor spi1.0: w25q128 (16384 Kbytes) cat erasesize 65536 (16384*1024)/65536 = 256 sectors spi-nor sysfs: cat jedec_id ef4018 cat manufacturer winbond cat partname w25q128 hexdump -v -C sfdp 00000000 53 46 44 50 05 01 00 ff 00 05 01 10 80 00 00 ff 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00000080 e5 20 f9 ff ff ff ff 07 44 eb 08 6b 08 3b 42 bb 00000090 fe ff ff ff ff ff 00 00 ff ff 40 eb 0c 20 0f 52 000000a0 10 d8 00 00 36 02 a6 00 82 ea 14 c9 e9 63 76 33 000000b0 7a 75 7a 75 f7 a2 d5 5c 19 f7 4d ff e9 30 f8 80 Cc: stable(a)vger.kernel.org Suggested-by: Michael Walle <michael(a)walle.cc> Reviewed-by: Michael Walle <michael(a)walle.cc> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> --- Changes in v5: - Detect also geometry from the SFDP table. - Link to v4: https://lore.kernel.org/r/20230714-spi-nor-winbond-w25q128-v4-1-89c5971df34… Changes in v4: - Fix up error in commit message. - Pick up Michael's ACK. - Link to v3: https://lore.kernel.org/r/20230714-spi-nor-winbond-w25q128-v3-1-bdb2192f079… Changes in v3: - Keep NO_SFDP_FLAGS(SECT_4K) around. - Update commit message - Link to v2: https://lore.kernel.org/r/20230712-spi-nor-winbond-w25q128-v2-1-50c9f1d58d6… Changes in v2: - Only add the write access flags. - Use SFDP parsing to properly detect the various available SPI modes. - Link to v1: https://lore.kernel.org/r/20230712-spi-nor-winbond-w25q128-v1-1-f78f3bb42a1… --- drivers/mtd/spi-nor/winbond.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c index 834d6ba5ce70..63ba8e3a96f5 100644 --- a/drivers/mtd/spi-nor/winbond.c +++ b/drivers/mtd/spi-nor/winbond.c @@ -120,8 +120,9 @@ static const struct flash_info winbond_nor_parts[] = { NO_SFDP_FLAGS(SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16) NO_SFDP_FLAGS(SECT_4K) }, - { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256) - NO_SFDP_FLAGS(SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 0, 0) + PARSE_SFDP + FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512) NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) .fixups = &w25q256_fixups }, --- base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 change-id: 20230711-spi-nor-winbond-w25q128-321a602ee267 Best regards, -- Linus Walleij <linus.walleij(a)linaro.org>

1 year, 9 months

2
1
0 0

[PATCH 5/8] clk: qcom: lpasscc-sc7280: fix missing resume during probe

by Johan Hovold

Drivers that enable runtime PM must make sure that the controller is runtime resumed before accessing its registers to prevent the power domain from being disabled. Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280") Cc: stable(a)vger.kernel.org # 5.16 Cc: Taniya Das <quic_tdas(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/lpasscc-sc7280.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c index 0df2b29e95e3..e6b815aec46a 100644 --- a/drivers/clk/qcom/lpasscc-sc7280.c +++ b/drivers/clk/qcom/lpasscc-sc7280.c @@ -118,9 +118,13 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev) ret = pm_clk_add(&pdev->dev, "iface"); if (ret < 0) { dev_err(&pdev->dev, "failed to acquire iface clock\n"); - goto destroy_pm_clk; + goto err_destroy_pm_clk; } + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + goto err_destroy_pm_clk; + if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) { lpass_regmap_config.name = "qdsp6ss"; lpass_regmap_config.max_register = 0x3f; @@ -128,7 +132,7 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev) ret = qcom_cc_probe_by_index(pdev, 0, desc); if (ret) - goto destroy_pm_clk; + goto err_put_rpm; } lpass_regmap_config.name = "top_cc"; @@ -137,11 +141,15 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev) ret = qcom_cc_probe_by_index(pdev, 1, desc); if (ret) - goto destroy_pm_clk; + goto err_put_rpm; + + pm_runtime_put(&pdev->dev); return 0; -destroy_pm_clk: +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); +err_destroy_pm_clk: pm_clk_destroy(&pdev->dev); return ret; -- 2.41.0

1 year, 9 months

3
2
0 0

[PATCH V2] MIPS: Loongson: Fix build error when make modules_install

by Huacai Chen

After commit 0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of cc-ifversion") we get a build error when make modules_install: cc1: error: '-mloongson-mmi' must be used with '-mhard-float' The reason is when make modules_install, 'call cc-option' doesn't work in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi applied and -march=loongson3a enable MMI instructions. To be detail, the error message comes from the CHECKFLAGS invocation of $(CC) but it has no impact on the final result of make modules_install, it is purely a cosmetic issue. The error occurs because cc-option is defined in scripts/Makefile.compiler, which is not included in Makefile when running 'make modules_install', as install targets are not supposed to require the compiler; see commit 805b2e1d427aab4b ("kbuild: include Makefile.compiler only when compiler is needed"). As a result, the call to check for '-mno-loongson-mmi' just never happens. Fix this by partially reverting to the old logic, use 'call cc-option' to conditionally apply -march=loongson3a and -march=mips64r2. By the way, Loongson-2E/2F is also broken in commit 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it together. Fixes: 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") Fixes: 0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion") Cc: stable(a)vger.kernel.org Cc: Feiyang Chen <chenfeiyang(a)loongson.cn> Cc: Nathan Chancellor <nathan(a)kernel.org> Cc: Nick Desaulniers <ndesaulniers(a)google.com> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- V2: Update commit message and fix for LOONGSON2EF together. arch/mips/Makefile | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index a7a4ee66a9d3..35a1b9b34734 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -181,16 +181,12 @@ endif cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += $(call cc-option,-march=loongson2e) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2F) += $(call cc-option,-march=loongson2f) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap # Some -march= flags enable MMI instructions, and GCC complains about that # support being enabled alongside -msoft-float. Thus explicitly disable MMI. cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi) -ifdef CONFIG_CPU_LOONGSON64 -cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap -cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a -cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2 -endif cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi) cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) -- 2.39.3

1 year, 9 months

4
3
0 0

[PATCH 8/8] clk: qcom: turingcc-qcs404: fix missing resume during probe

by Johan Hovold

Drivers that enable runtime PM must make sure that the controller is runtime resumed before accessing its registers to prevent the power domain from being disabled. Fixes: 892df0191b29 ("clk: qcom: Add QCS404 TuringCC") Cc: stable(a)vger.kernel.org # 5.2 Cc: Bjorn Andersson <andersson(a)kernel.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/turingcc-qcs404.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/turingcc-qcs404.c b/drivers/clk/qcom/turingcc-qcs404.c index 43184459228f..2cd288d6c3e4 100644 --- a/drivers/clk/qcom/turingcc-qcs404.c +++ b/drivers/clk/qcom/turingcc-qcs404.c @@ -125,11 +125,22 @@ static int turingcc_probe(struct platform_device *pdev) return ret; } + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; + ret = qcom_cc_probe(pdev, &turingcc_desc); if (ret < 0) - return ret; + goto err_put_rpm; + + pm_runtime_put(&pdev->dev); return 0; + +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); + + return ret; } static const struct dev_pm_ops turingcc_pm_ops = { -- 2.41.0

1 year, 9 months

1
0
0 0

[PATCH 7/8] clk: qcom: mss-sc7180: fix missing resume during probe

by Johan Hovold

Drivers that enable runtime PM must make sure that the controller is runtime resumed before accessing its registers to prevent the power domain from being disabled. Fixes: 8def929c4097 ("clk: qcom: Add modem clock controller driver for SC7180") Cc: stable(a)vger.kernel.org # 5.7 Cc: Taniya Das <quic_tdas(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/mss-sc7180.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c index 5a1407440662..d106bc65470e 100644 --- a/drivers/clk/qcom/mss-sc7180.c +++ b/drivers/clk/qcom/mss-sc7180.c @@ -87,11 +87,22 @@ static int mss_sc7180_probe(struct platform_device *pdev) return ret; } + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; + ret = qcom_cc_probe(pdev, &mss_sc7180_desc); if (ret < 0) - return ret; + goto err_put_rpm; + + pm_runtime_put(&pdev->dev); return 0; + +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); + + return ret; } static const struct dev_pm_ops mss_sc7180_pm_ops = { -- 2.41.0

1 year, 9 months

1
0
0 0

[PATCH 6/8] clk: qcom: q6sstop-qcs404: fix missing resume during probe

by Johan Hovold

Drivers that enable runtime PM must make sure that the controller is runtime resumed before accessing its registers to prevent the power domain from being disabled. Fixes: 6cdef2738db0 ("clk: qcom: Add Q6SSTOP clock controller for QCS404") Cc: stable(a)vger.kernel.org # 5.5 Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/q6sstop-qcs404.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/q6sstop-qcs404.c b/drivers/clk/qcom/q6sstop-qcs404.c index 780074e05841..26e2d63614ac 100644 --- a/drivers/clk/qcom/q6sstop-qcs404.c +++ b/drivers/clk/qcom/q6sstop-qcs404.c @@ -174,21 +174,32 @@ static int q6sstopcc_qcs404_probe(struct platform_device *pdev) return ret; } + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret) + return ret; + q6sstop_regmap_config.name = "q6sstop_tcsr"; desc = &tcsr_qcs404_desc; ret = qcom_cc_probe_by_index(pdev, 1, desc); if (ret) - return ret; + goto err_put_rpm; q6sstop_regmap_config.name = "q6sstop_cc"; desc = &q6sstop_qcs404_desc; ret = qcom_cc_probe_by_index(pdev, 0, desc); if (ret) - return ret; + goto err_put_rpm; + + pm_runtime_put(&pdev->dev); return 0; + +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); + + return ret; } static const struct dev_pm_ops q6sstopcc_pm_ops = { -- 2.41.0

1 year, 9 months

1
0
0 0

[PATCH 3/8] clk: qcom: dispcc-sm8550: fix runtime PM imbalance on probe errors

by Johan Hovold

Make sure to decrement the runtime PM usage count before returning in case regmap initialisation fails. Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver") Cc: stable(a)vger.kernel.org # 6.3 Cc: Neil Armstrong <neil.armstrong(a)linaro.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/dispcc-sm8550.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/dispcc-sm8550.c b/drivers/clk/qcom/dispcc-sm8550.c index 1e5a11081860..b2fae9001ff2 100644 --- a/drivers/clk/qcom/dispcc-sm8550.c +++ b/drivers/clk/qcom/dispcc-sm8550.c @@ -1761,8 +1761,10 @@ static int disp_cc_sm8550_probe(struct platform_device *pdev) return ret; regmap = qcom_cc_map(pdev, &disp_cc_sm8550_desc); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + goto err_put_rpm; + } clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config); clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config); @@ -1777,9 +1779,16 @@ static int disp_cc_sm8550_probe(struct platform_device *pdev) regmap_update_bits(regmap, 0xe054, BIT(0), BIT(0)); ret = qcom_cc_really_probe(pdev, &disp_cc_sm8550_desc, regmap); + if (ret) + goto err_put_rpm; pm_runtime_put(&pdev->dev); + return 0; + +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); + return ret; } -- 2.41.0

1 year, 9 months

1
0
0 0

[PATCH 2/8] clk: qcom: dispcc-sm8450: fix runtime PM imbalance on probe errors

by Johan Hovold

Make sure to decrement the runtime PM usage count before returning in case regmap initialisation fails. Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450") Cc: stable(a)vger.kernel.org # 6.1 Cc: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/dispcc-sm8450.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/dispcc-sm8450.c b/drivers/clk/qcom/dispcc-sm8450.c index adbfd30bfc96..84db4ff5485a 100644 --- a/drivers/clk/qcom/dispcc-sm8450.c +++ b/drivers/clk/qcom/dispcc-sm8450.c @@ -1776,8 +1776,10 @@ static int disp_cc_sm8450_probe(struct platform_device *pdev) return ret; regmap = qcom_cc_map(pdev, &disp_cc_sm8450_desc); - if (IS_ERR(regmap)) - return PTR_ERR(regmap); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + goto err_put_rpm; + } clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config); clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config); @@ -1792,9 +1794,16 @@ static int disp_cc_sm8450_probe(struct platform_device *pdev) regmap_update_bits(regmap, 0xe05c, BIT(0), BIT(0)); ret = qcom_cc_really_probe(pdev, &disp_cc_sm8450_desc, regmap); + if (ret) + goto err_put_rpm; pm_runtime_put(&pdev->dev); + return 0; + +err_put_rpm: + pm_runtime_put_sync(&pdev->dev); + return ret; } -- 2.41.0

1 year, 9 months

1
0
0 0

[PATCH 1/8] clk: qcom: camcc-sc7180: fix async resume during probe

by Johan Hovold

To make sure that the controller is runtime resumed and its power domain is enabled before accessing its registers during probe, the synchronous runtime PM interface must be used. Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones") Cc: stable(a)vger.kernel.org # 5.11 Cc: Stephen Boyd <sboyd(a)kernel.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/clk/qcom/camcc-sc7180.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c index 8a4ba7a19ed1..6f56bdbf0204 100644 --- a/drivers/clk/qcom/camcc-sc7180.c +++ b/drivers/clk/qcom/camcc-sc7180.c @@ -1664,7 +1664,7 @@ static int cam_cc_sc7180_probe(struct platform_device *pdev) return ret; } - ret = pm_runtime_get(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); if (ret) return ret; -- 2.41.0

1 year, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2023