From: Tobias Schramm <t.schramm(a)manjaro.org>
[ Upstream commit eca5bd666b0aa7dc0bca63292e4778968241134e ]
This commit fixes a race between completion of stop command and start of a
new command.
Previously the command ready interrupt was enabled before stop command
was written to the command register. This caused the command ready
interrupt to fire immediately since the CMDRDY flag is asserted constantly
while there is no command in progress.
Consequently the command state machine will immediately advance to the
next state when the tasklet function is executed again, no matter
actual completion state of the stop command.
Thus a new command can then be dispatched immediately, interrupting and
corrupting the stop command on the CMD line.
Fix that by dropping the command ready interrupt enable before calling
atmci_send_stop_cmd. atmci_send_stop_cmd does already enable the
command ready interrupt, no further writes to ATMCI_IER are necessary.
Signed-off-by: Tobias Schramm <t.schramm(a)manjaro.org>
Acked-by: Ludovic Desroches <ludovic.desroches(a)microchip.com>
Link: https://lore.kernel.org/r/20221230194315.809903-2-t.schramm@manjaro.org
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/mmc/host/atmel-mci.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 6f971a3e7e494..493ed8c824195 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1818,7 +1818,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
state = STATE_WAITING_NOTBUSY;
} else if (host->mrq->stop) {
- atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
atmci_send_stop_cmd(host, data);
state = STATE_SENDING_STOP;
} else {
@@ -1851,8 +1850,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
* command to send.
*/
if (host->mrq->stop) {
- atmci_writel(host, ATMCI_IER,
- ATMCI_CMDRDY);
atmci_send_stop_cmd(host, data);
state = STATE_SENDING_STOP;
} else {
--
2.39.2
From: Tobias Schramm <t.schramm(a)manjaro.org>
[ Upstream commit eca5bd666b0aa7dc0bca63292e4778968241134e ]
This commit fixes a race between completion of stop command and start of a
new command.
Previously the command ready interrupt was enabled before stop command
was written to the command register. This caused the command ready
interrupt to fire immediately since the CMDRDY flag is asserted constantly
while there is no command in progress.
Consequently the command state machine will immediately advance to the
next state when the tasklet function is executed again, no matter
actual completion state of the stop command.
Thus a new command can then be dispatched immediately, interrupting and
corrupting the stop command on the CMD line.
Fix that by dropping the command ready interrupt enable before calling
atmci_send_stop_cmd. atmci_send_stop_cmd does already enable the
command ready interrupt, no further writes to ATMCI_IER are necessary.
Signed-off-by: Tobias Schramm <t.schramm(a)manjaro.org>
Acked-by: Ludovic Desroches <ludovic.desroches(a)microchip.com>
Link: https://lore.kernel.org/r/20221230194315.809903-2-t.schramm@manjaro.org
Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/mmc/host/atmel-mci.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index bb9bbf1c927b6..dd18440a90c58 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1817,7 +1817,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
state = STATE_WAITING_NOTBUSY;
} else if (host->mrq->stop) {
- atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
atmci_send_stop_cmd(host, data);
state = STATE_SENDING_STOP;
} else {
@@ -1850,8 +1849,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
* command to send.
*/
if (host->mrq->stop) {
- atmci_writel(host, ATMCI_IER,
- ATMCI_CMDRDY);
atmci_send_stop_cmd(host, data);
state = STATE_SENDING_STOP;
} else {
--
2.39.2
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir(a)g.ecc.u-tokyo.ac.jp>
Cc: stable(a)vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com>
---
arch/x86/kvm/vmx/nested.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index d93c715cda6a..bceb5ad409c6 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3021,7 +3021,7 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12,
enum vm_entry_failure_code *entry_failure_code)
{
- bool ia32e;
+ bool ia32e = !!(vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE);
*entry_failure_code = ENTRY_FAIL_DEFAULT;
@@ -3047,6 +3047,13 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
vmcs12->guest_ia32_perf_global_ctrl)))
return -EINVAL;
+ if (CC((vmcs12->guest_cr0 & (X86_CR0_PG | X86_CR0_PE)) == X86_CR0_PG))
+ return -EINVAL;
+
+ if (CC(ia32e && !(vmcs12->guest_cr4 & X86_CR4_PAE)) ||
+ CC(ia32e && !(vmcs12->guest_cr0 & X86_CR0_PG)))
+ return -EINVAL;
+
/*
* If the load IA32_EFER VM-entry control is 1, the following checks
* are performed on the field for the IA32_EFER MSR:
@@ -3058,7 +3065,6 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
*/
if (to_vmx(vcpu)->nested.nested_run_pending &&
(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_EFER)) {
- ia32e = (vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE) != 0;
if (CC(!kvm_valid_efer(vcpu, vmcs12->guest_ia32_efer)) ||
CC(ia32e != !!(vmcs12->guest_ia32_efer & EFER_LMA)) ||
CC(((vmcs12->guest_cr0 & X86_CR0_PG) &&
--
2.39.1
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir(a)g.ecc.u-tokyo.ac.jp>
Cc: stable(a)vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com>
---
arch/x86/kvm/vmx/nested.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index d93c715cda6a..43693e4772ff 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3047,6 +3047,19 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
vmcs12->guest_ia32_perf_global_ctrl)))
return -EINVAL;
+ if (CC((vmcs12->guest_cr0 & (X86_CR0_PG | X86_CR0_PE)) == X86_CR0_PG))
+ return -EINVAL;
+
+#ifdef CONFIG_X86_64
+ ia32e = !!(vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE);
+#else
+ ia32e = false;
+#endif
+ if (CC(ia32e &&
+ (!(vmcs12->guest_cr4 & X86_CR4_PAE) ||
+ !(vmcs12->guest_cr0 & X86_CR0_PG))))
+ return -EINVAL;
+
/*
* If the load IA32_EFER VM-entry control is 1, the following checks
* are performed on the field for the IA32_EFER MSR:
@@ -3058,7 +3071,6 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
*/
if (to_vmx(vcpu)->nested.nested_run_pending &&
(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_EFER)) {
- ia32e = (vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE) != 0;
if (CC(!kvm_valid_efer(vcpu, vmcs12->guest_ia32_efer)) ||
CC(ia32e != !!(vmcs12->guest_ia32_efer & EFER_LMA)) ||
CC(((vmcs12->guest_cr0 & X86_CR0_PG) &&
--
2.39.1