From: Oliver Neukum <oneukum(a)suse.com>
[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum(a)suse.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/usb/aqc111.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 68912e266826b..892d58b38cf5b 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
u16 pkt_count = 0;
u64 desc_hdr = 0;
u16 vlan_tag = 0;
- u32 skb_len = 0;
+ u32 skb_len;
if (!skb)
goto err;
- if (skb->len == 0)
+ skb_len = skb->len;
+ if (skb_len < sizeof(desc_hdr))
goto err;
- skb_len = skb->len;
/* RX Descriptor Header */
- skb_trim(skb, skb->len - sizeof(desc_hdr));
+ skb_trim(skb, skb_len - sizeof(desc_hdr));
desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb));
/* Check these packets */
--
2.42.0
From: Oliver Neukum <oneukum(a)suse.com>
[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum(a)suse.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/usb/aqc111.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index c9c4095181744..4ea02116be182 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
u16 pkt_count = 0;
u64 desc_hdr = 0;
u16 vlan_tag = 0;
- u32 skb_len = 0;
+ u32 skb_len;
if (!skb)
goto err;
- if (skb->len == 0)
+ skb_len = skb->len;
+ if (skb_len < sizeof(desc_hdr))
goto err;
- skb_len = skb->len;
/* RX Descriptor Header */
- skb_trim(skb, skb->len - sizeof(desc_hdr));
+ skb_trim(skb, skb_len - sizeof(desc_hdr));
desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb));
/* Check these packets */
--
2.42.0
From: Oliver Neukum <oneukum(a)suse.com>
[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]
If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.
The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.
The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.
Signed-off-by: Oliver Neukum <oneukum(a)suse.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/usb/aqc111.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index e8d49886d6953..bc5e3f45c499e 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
u16 pkt_count = 0;
u64 desc_hdr = 0;
u16 vlan_tag = 0;
- u32 skb_len = 0;
+ u32 skb_len;
if (!skb)
goto err;
- if (skb->len == 0)
+ skb_len = skb->len;
+ if (skb_len < sizeof(desc_hdr))
goto err;
- skb_len = skb->len;
/* RX Descriptor Header */
- skb_trim(skb, skb->len - sizeof(desc_hdr));
+ skb_trim(skb, skb_len - sizeof(desc_hdr));
desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb));
/* Check these packets */
--
2.42.0
From: Saurabh Sengar <ssengar(a)linux.microsoft.com>
[ Upstream commit 7e8037b099c0bbe8f2109dc452dbcab8d400fc53 ]
A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().
Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).
It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().
For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.
Changed the local variable "int gen2vm" to "bool gen2vm".
Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui(a)microsoft.com>
Signed-off-by: Wei Liu <wei.liu(a)kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar(a)linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/x86/hyperv/hv_init.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 189ae92de4d06..c18e5c764643b 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <asm/apic.h>
#include <asm/desc.h>
+#include <asm/e820/api.h>
#include <asm/sev.h>
#include <asm/ibt.h>
#include <asm/hypervisor.h>
@@ -267,15 +268,31 @@ static int hv_cpu_die(unsigned int cpu)
static int __init hv_pci_init(void)
{
- int gen2vm = efi_enabled(EFI_BOOT);
+ bool gen2vm = efi_enabled(EFI_BOOT);
/*
- * For Generation-2 VM, we exit from pci_arch_init() by returning 0.
- * The purpose is to suppress the harmless warning:
+ * A Generation-2 VM doesn't support legacy PCI/PCIe, so both
+ * raw_pci_ops and raw_pci_ext_ops are NULL, and pci_subsys_init() ->
+ * pcibios_init() doesn't call pcibios_resource_survey() ->
+ * e820__reserve_resources_late(); as a result, any emulated persistent
+ * memory of E820_TYPE_PRAM (12) via the kernel parameter
+ * memmap=nn[KMG]!ss is not added into iomem_resource and hence can't be
+ * detected by register_e820_pmem(). Fix this by directly calling
+ * e820__reserve_resources_late() here: e820__reserve_resources_late()
+ * depends on e820__reserve_resources(), which has been called earlier
+ * from setup_arch(). Note: e820__reserve_resources_late() also adds
+ * any memory of E820_TYPE_PMEM (7) into iomem_resource, and
+ * acpi_nfit_register_region() -> acpi_nfit_insert_resource() ->
+ * region_intersects() returns REGION_INTERSECTS, so the memory of
+ * E820_TYPE_PMEM won't get added twice.
+ *
+ * We return 0 here so that pci_arch_init() won't print the warning:
* "PCI: Fatal: No config space access function found"
*/
- if (gen2vm)
+ if (gen2vm) {
+ e820__reserve_resources_late();
return 0;
+ }
/* For Generation-1 VM, we'll proceed in pci_arch_init(). */
return 1;
--
2.42.0
From: Saurabh Sengar <ssengar(a)linux.microsoft.com>
[ Upstream commit 7e8037b099c0bbe8f2109dc452dbcab8d400fc53 ]
A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and
raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init()
doesn't call pcibios_resource_survey() -> e820__reserve_resources_late();
as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via
the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource
and hence can't be detected by register_e820_pmem().
Fix this by directly calling e820__reserve_resources_late() in
hv_pci_init(), which is called from arch_initcall(pci_arch_init).
It's ok to move a Gen2 VM's e820__reserve_resources_late() from
subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because
the code in-between doesn't depend on the E820 resources.
e820__reserve_resources_late() depends on e820__reserve_resources(),
which has been called earlier from setup_arch().
For a Gen-2 VM, the new hv_pci_init() also adds any memory of
E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() ->
acpi_nfit_insert_resource() -> region_intersects() returns
REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice.
Changed the local variable "int gen2vm" to "bool gen2vm".
Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui(a)microsoft.com>
Signed-off-by: Wei Liu <wei.liu(a)kernel.org>
Message-ID: <1699691867-9827-1-git-send-email-ssengar(a)linux.microsoft.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/x86/hyperv/hv_init.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 21556ad87f4ba..8f3a4d16bb791 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <asm/apic.h>
#include <asm/desc.h>
+#include <asm/e820/api.h>
#include <asm/sev.h>
#include <asm/ibt.h>
#include <asm/hypervisor.h>
@@ -286,15 +287,31 @@ static int hv_cpu_die(unsigned int cpu)
static int __init hv_pci_init(void)
{
- int gen2vm = efi_enabled(EFI_BOOT);
+ bool gen2vm = efi_enabled(EFI_BOOT);
/*
- * For Generation-2 VM, we exit from pci_arch_init() by returning 0.
- * The purpose is to suppress the harmless warning:
+ * A Generation-2 VM doesn't support legacy PCI/PCIe, so both
+ * raw_pci_ops and raw_pci_ext_ops are NULL, and pci_subsys_init() ->
+ * pcibios_init() doesn't call pcibios_resource_survey() ->
+ * e820__reserve_resources_late(); as a result, any emulated persistent
+ * memory of E820_TYPE_PRAM (12) via the kernel parameter
+ * memmap=nn[KMG]!ss is not added into iomem_resource and hence can't be
+ * detected by register_e820_pmem(). Fix this by directly calling
+ * e820__reserve_resources_late() here: e820__reserve_resources_late()
+ * depends on e820__reserve_resources(), which has been called earlier
+ * from setup_arch(). Note: e820__reserve_resources_late() also adds
+ * any memory of E820_TYPE_PMEM (7) into iomem_resource, and
+ * acpi_nfit_register_region() -> acpi_nfit_insert_resource() ->
+ * region_intersects() returns REGION_INTERSECTS, so the memory of
+ * E820_TYPE_PMEM won't get added twice.
+ *
+ * We return 0 here so that pci_arch_init() won't print the warning:
* "PCI: Fatal: No config space access function found"
*/
- if (gen2vm)
+ if (gen2vm) {
+ e820__reserve_resources_late();
return 0;
+ }
/* For Generation-1 VM, we'll proceed in pci_arch_init(). */
return 1;
--
2.42.0