From: Heiner Kallweit <hkallweit1(a)gmail.com>
[Backport: commit 90ca51e8c654699b672ba61aeaa418dfb3252e5e]
This backport to avoid the bug caused by r8169.
This effectively reverts 4b5f82f6aaef. On a number of systems ASPM L1
causes tx timeouts with RTL8168h, see referenced bug report.
Fixes: 4b5f82f6aaef ("r8169: enable ASPM L1/L1.1 from RTL8168h")
Cc: stable(a)vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217814
Signed-off-by: Heiner Kallweit <hkallweit1(a)gmail.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
---
drivers/net/ethernet/realtek/r8169_main.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 45147a1016be..27efd07f09ef 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5224,13 +5224,9 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Disable ASPM L1 as that cause random device stop working
* problems as well as full system hangs for some PCIe devices users.
- * Chips from RTL8168h partially have issues with L1.2, but seem
- * to work fine with L1 and L1.1.
*/
if (rtl_aspm_is_safe(tp))
rc = 0;
- else if (tp->mac_version >= RTL_GIGA_MAC_VER_46)
- rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1_2);
else
rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1);
tp->aspm_manageable = !rc;
--
2.25.1
Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.
After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.
It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.
Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Cc: stable(a)vger.kernel.org
Suggested-by: Andrew Lunn <andrew(a)lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka(a)gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew(a)lunn.ch>
---
v2: clarified fixed drivers; added fixes tag & cc stable
drivers/net/phy/phylink.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 6712883498..a28da80bde 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1616,6 +1616,7 @@ struct phylink *phylink_create(struct phylink_config *config,
pl->config = config;
if (config->type == PHYLINK_NETDEV) {
pl->netdev = to_net_dev(config->dev);
+ netif_carrier_off(pl->netdev);
} else if (config->type == PHYLINK_DEV) {
pl->dev = config->dev;
} else {
--
2.42.0