Add a helper for enabling link states that can be used in contexts where
a pci_bus_sem read lock is already held (e.g. from pci_walk_bus()).
This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.
Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Cc: stable(a)vger.kernel.org # 6.3
Cc: Michael Bottini <michael.a.bottini(a)linux.intel.com>
Cc: David E. Box <david.e.box(a)linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org>
Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org>
---
drivers/pci/pcie/aspm.c | 53 +++++++++++++++++++++++++++++++----------
include/linux/pci.h | 3 +++
2 files changed, 43 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 50b04ae5c394..5eb462772354 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1109,17 +1109,7 @@ int pci_disable_link_state(struct pci_dev *pdev, int state)
}
EXPORT_SYMBOL(pci_disable_link_state);
-/**
- * pci_enable_link_state - Clear and set the default device link state so that
- * the link may be allowed to enter the specified states. Note that if the
- * BIOS didn't grant ASPM control to the OS, this does nothing because we can't
- * touch the LNKCTL register. Also note that this does not enable states
- * disabled by pci_disable_link_state(). Return 0 or a negative errno.
- *
- * @pdev: PCI device
- * @state: Mask of ASPM link states to enable
- */
-int pci_enable_link_state(struct pci_dev *pdev, int state)
+static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
{
struct pcie_link_state *link = pcie_aspm_get_link(pdev);
@@ -1136,7 +1126,8 @@ int pci_enable_link_state(struct pci_dev *pdev, int state)
return -EPERM;
}
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
link->aspm_default = 0;
if (state & PCIE_LINK_STATE_L0S)
@@ -1157,12 +1148,48 @@ int pci_enable_link_state(struct pci_dev *pdev, int state)
link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0;
pcie_set_clkpm(link, policy_to_clkpm_state(link));
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
return 0;
}
+
+/**
+ * pci_enable_link_state - Clear and set the default device link state so that
+ * the link may be allowed to enter the specified states. Note that if the
+ * BIOS didn't grant ASPM control to the OS, this does nothing because we can't
+ * touch the LNKCTL register. Also note that this does not enable states
+ * disabled by pci_disable_link_state(). Return 0 or a negative errno.
+ *
+ * @pdev: PCI device
+ * @state: Mask of ASPM link states to enable
+ */
+int pci_enable_link_state(struct pci_dev *pdev, int state)
+{
+ return __pci_enable_link_state(pdev, state, false);
+}
EXPORT_SYMBOL(pci_enable_link_state);
+/**
+ * pci_enable_link_state_locked - Clear and set the default device link state
+ * so that the link may be allowed to enter the specified states. Note that if
+ * the BIOS didn't grant ASPM control to the OS, this does nothing because we
+ * can't touch the LNKCTL register. Also note that this does not enable states
+ * disabled by pci_disable_link_state(). Return 0 or a negative errno.
+ *
+ * @pdev: PCI device
+ * @state: Mask of ASPM link states to enable
+ *
+ * Context: Caller holds pci_bus_sem read lock.
+ */
+int pci_enable_link_state_locked(struct pci_dev *pdev, int state)
+{
+ lockdep_assert_held_read(&pci_bus_sem);
+
+ return __pci_enable_link_state(pdev, state, true);
+}
+EXPORT_SYMBOL(pci_enable_link_state_locked);
+
static int pcie_aspm_set_policy(const char *val,
const struct kernel_param *kp)
{
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 60ca768bc867..dea043bc1e38 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1829,6 +1829,7 @@ extern bool pcie_ports_native;
int pci_disable_link_state(struct pci_dev *pdev, int state);
int pci_disable_link_state_locked(struct pci_dev *pdev, int state);
int pci_enable_link_state(struct pci_dev *pdev, int state);
+int pci_enable_link_state_locked(struct pci_dev *pdev, int state);
void pcie_no_aspm(void);
bool pcie_aspm_support_enabled(void);
bool pcie_aspm_enabled(struct pci_dev *pdev);
@@ -1839,6 +1840,8 @@ static inline int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
{ return 0; }
static inline int pci_enable_link_state(struct pci_dev *pdev, int state)
{ return 0; }
+static inline int pci_enable_link_state_locked(struct pci_dev *pdev, int state)
+{ return 0; }
static inline void pcie_no_aspm(void) { }
static inline bool pcie_aspm_support_enabled(void) { return false; }
static inline bool pcie_aspm_enabled(struct pci_dev *pdev) { return false; }
--
2.41.0
Before calling add partition or resize partition, there is no check
on whether the length is aligned with the logical block size.
If the logical block size of the disk is larger than 512 bytes,
then the partition size maybe not the multiple of the logical block size,
and when the last sector is read, bio_truncate() will adjust the bio size,
resulting in an IO error if the size of the read command is smaller than
the logical block size.If integrity data is supported, this will also
result in a null pointer dereference when calling bio_integrity_free.
Cc: stable(a)vger.kernel.org
Signed-off-by: Min Li <min15.li(a)samsung.com>
Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com>
---
Changes from v1:
- Add a space after /* and before */.
- Move length alignment check before the "start = p.start >> SECTOR_SHIFT"
- Move check for p.start being aligned together with this length alignment check.
Changes from v2:
- Add the assignment on the first line and merge the two lines into one.
Changes from v3:
- Change the blksz to unsigned int.
- Add check if p.start and p.length are negative.
Changes from v4:
- Remove the local variable blksz and use bdev_logical_block_size(bdev) directly.
---
block/ioctl.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/block/ioctl.c b/block/ioctl.c
index 3be11941fb2d..0e8723c1a807 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -18,7 +18,7 @@ static int blkpg_do_ioctl(struct block_device *bdev,
{
struct gendisk *disk = bdev->bd_disk;
struct blkpg_partition p;
- long long start, length;
+ sector_t start, length;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
@@ -33,14 +33,17 @@ static int blkpg_do_ioctl(struct block_device *bdev,
if (op == BLKPG_DEL_PARTITION)
return bdev_del_partition(disk, p.pno);
+ if (p.start < 0 || p.length <= 0 || p.start + p.length < 0)
+ return -EINVAL;
+ /* Check that the partition is aligned to the block size */
+ if (!IS_ALIGNED(p.start | p.length, bdev_logical_block_size(bdev)))
+ return -EINVAL;
+
start = p.start >> SECTOR_SHIFT;
length = p.length >> SECTOR_SHIFT;
switch (op) {
case BLKPG_ADD_PARTITION:
- /* check if partition is aligned to blocksize */
- if (p.start & (bdev_logical_block_size(bdev) - 1))
- return -EINVAL;
return bdev_add_partition(disk, p.pno, start, length);
case BLKPG_RESIZE_PARTITION:
return bdev_resize_partition(disk, p.pno, start, length);
--
2.34.1
From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
Change snprint format specifier from %d to %u since port_id is unsigned.
Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
Cc: stable(a)vger.kernel.org # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port
Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com>
---
I did not originally add a "Cc: stable" tag for commit 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port")
as it was intended only to improve debugging using debugfs. But
since then, I have been able to confirm that it also fixes a long standing
bug in our system where the Tx interrupt are no longer enabled at some
point when transmitting large RS-485 paquets (> 64 bytes, which is the size
of the FIFO). I have been investigating why, but so far I haven't found the
exact cause, altough I suspect it has something to do with regmap caching.
Therefore, I have added it as a prerequisite for this patch so that it is
automatically added to the stable kernels.
---
drivers/tty/serial/sc16is7xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 10e90a7774f0..8e5baf2f6ec6 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1700,7 +1700,7 @@ static const char *sc16is7xx_regmap_name(unsigned int port_id)
{
static char buf[6];
- snprintf(buf, sizeof(buf), "port%d", port_id);
+ snprintf(buf, sizeof(buf), "port%u", port_id);
return buf;
}
--
2.39.2
From: Mike Christie <michael.christie(a)oracle.com>
[ Upstream commit 3b83486399a6a9feb9c681b74c21a227d48d7020 ]
If scsi_execute_cmd() returns < 0, it doesn't initialize the sshdr, so we
shouldn't access the sshdr. If it returns 0, then the cmd executed
successfully, so there is no need to check the sshdr. sd_sync_cache() will
only access the sshdr if it's been setup because it calls
scsi_status_is_check_condition() before accessing it. However, the
sd_sync_cache() caller, sd_suspend_common(), does not check.
sd_suspend_common() is only checking for ILLEGAL_REQUEST which it's using
to determine if the command is supported. If it's not it just ignores the
error. So to fix its sshdr use this patch just moves that check to
sd_sync_cache() where it converts ILLEGAL_REQUEST to success/0.
sd_suspend_common() was ignoring that error and sd_shutdown() doesn't check
for errors so there will be no behavior changes.
Signed-off-by: Mike Christie <michael.christie(a)oracle.com>
Link: https://lore.kernel.org/r/20231106231304.5694-2-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Reviewed-by: Martin Wilck <mwilck(a)suse.com>
Reviewed-by: Bart Van Assche <bvanassche(a)acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/scsi/sd.c | 53 ++++++++++++++++++++---------------------------
1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6effa13039f39..ac5e917f7abd6 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1642,24 +1642,21 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
return disk_changed ? DISK_EVENT_MEDIA_CHANGE : 0;
}
-static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
+static int sd_sync_cache(struct scsi_disk *sdkp)
{
int retries, res;
struct scsi_device *sdp = sdkp->device;
const int timeout = sdp->request_queue->rq_timeout
* SD_FLUSH_TIMEOUT_MULTIPLIER;
- struct scsi_sense_hdr my_sshdr;
+ struct scsi_sense_hdr sshdr;
const struct scsi_exec_args exec_args = {
.req_flags = BLK_MQ_REQ_PM,
- /* caller might not be interested in sense, but we need it */
- .sshdr = sshdr ? : &my_sshdr,
+ .sshdr = &sshdr,
};
if (!scsi_device_online(sdp))
return -ENODEV;
- sshdr = exec_args.sshdr;
-
for (retries = 3; retries > 0; --retries) {
unsigned char cmd[16] = { 0 };
@@ -1684,15 +1681,23 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
return res;
if (scsi_status_is_check_condition(res) &&
- scsi_sense_valid(sshdr)) {
- sd_print_sense_hdr(sdkp, sshdr);
+ scsi_sense_valid(&sshdr)) {
+ sd_print_sense_hdr(sdkp, &sshdr);
/* we need to evaluate the error return */
- if (sshdr->asc == 0x3a || /* medium not present */
- sshdr->asc == 0x20 || /* invalid command */
- (sshdr->asc == 0x74 && sshdr->ascq == 0x71)) /* drive is password locked */
+ if (sshdr.asc == 0x3a || /* medium not present */
+ sshdr.asc == 0x20 || /* invalid command */
+ (sshdr.asc == 0x74 && sshdr.ascq == 0x71)) /* drive is password locked */
/* this is no error here */
return 0;
+ /*
+ * This drive doesn't support sync and there's not much
+ * we can do because this is called during shutdown
+ * or suspend so just return success so those operations
+ * can proceed.
+ */
+ if (sshdr.sense_key == ILLEGAL_REQUEST)
+ return 0;
}
switch (host_byte(res)) {
@@ -3847,7 +3852,7 @@ static void sd_shutdown(struct device *dev)
if (sdkp->WCE && sdkp->media_present) {
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
- sd_sync_cache(sdkp, NULL);
+ sd_sync_cache(sdkp);
}
if ((system_state != SYSTEM_RESTART &&
@@ -3868,7 +3873,6 @@ static inline bool sd_do_start_stop(struct scsi_device *sdev, bool runtime)
static int sd_suspend_common(struct device *dev, bool runtime)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
- struct scsi_sense_hdr sshdr;
int ret = 0;
if (!sdkp) /* E.g.: runtime suspend following sd_remove() */
@@ -3877,24 +3881,13 @@ static int sd_suspend_common(struct device *dev, bool runtime)
if (sdkp->WCE && sdkp->media_present) {
if (!sdkp->device->silence_suspend)
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
- ret = sd_sync_cache(sdkp, &sshdr);
-
- if (ret) {
- /* ignore OFFLINE device */
- if (ret == -ENODEV)
- return 0;
-
- if (!scsi_sense_valid(&sshdr) ||
- sshdr.sense_key != ILLEGAL_REQUEST)
- return ret;
+ ret = sd_sync_cache(sdkp);
+ /* ignore OFFLINE device */
+ if (ret == -ENODEV)
+ return 0;
- /*
- * sshdr.sense_key == ILLEGAL_REQUEST means this drive
- * doesn't support sync. There's not much to do and
- * suspend shouldn't fail.
- */
- ret = 0;
- }
+ if (ret)
+ return ret;
}
if (sd_do_start_stop(sdkp->device, runtime)) {
--
2.42.0
This is the candidate patch of CVE-2023-47233 :
https://nvd.nist.gov/vuln/detail/CVE-2023-47233
In brcm80211 driver,it starts with the following invoking chain
to start init a timeout worker:
->brcmf_usb_probe
->brcmf_usb_probe_cb
->brcmf_attach
->brcmf_bus_started
->brcmf_cfg80211_attach
->wl_init_priv
->brcmf_init_escan
->INIT_WORK(&cfg->escan_timeout_work,
brcmf_cfg80211_escan_timeout_worker);
If we disconnect the USB by hotplug, it will call
brcmf_usb_disconnect to make cleanup. The invoking chain is :
brcmf_usb_disconnect
->brcmf_usb_disconnect_cb
->brcmf_detach
->brcmf_cfg80211_detach
->kfree(cfg);
While the timeout woker may still be running. This will cause
a use-after-free bug on cfg in brcmf_cfg80211_escan_timeout_worker.
Fix it by deleting the timer and canceling the worker in
brcmf_cfg80211_detach.
Fixes: e756af5b30b0 ("brcmfmac: add e-scan support.")
Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com>
Cc: stable(a)vger.kernel.org
---
v5:
- replace del_timer_sync with timer_shutdown_sync suggested by
Arend and Takashi
v4:
- rename the subject and add CVE number as Ping-Ke Shih suggested
v3:
- rename the subject as Johannes suggested
v2:
- fix the error of kernel test bot reported
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 667462369a32..a8723a61c9e4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -8431,6 +8431,8 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg)
if (!cfg)
return;
+ timer_shutdown_sync(&cfg->escan_timeout);
+ cancel_work_sync(&cfg->escan_timeout_work);
brcmf_pno_detach(cfg);
brcmf_btcoex_detach(cfg);
wiphy_unregister(cfg->wiphy);
--
2.25.1
Upstream commit bac1ec551434 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.
We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci_priv_data since its needed for DWC3 controller.
In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR
More information about this XHCI quirk is mentioned on the
following thread.
https://lore.kernel.org/all/20201208092912.1773650-3-mathias.nyman@linux.in…
Cc: <stable(a)vger.kernel.org> # 5.11
Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK")
Signed-off-by: Prashanth K <quic_prashk(a)quicinc.com>
---
drivers/usb/dwc3/host.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 61f57fe5bb78..ee3b667a88b2 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
+#include "../host/xhci-plat.h"
#include "core.h"
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
@@ -63,6 +64,7 @@ int dwc3_host_init(struct dwc3 *dwc)
{
struct property_entry props[4];
struct platform_device *xhci;
+ struct xhci_plat_priv dwc3_xhci_plat_priv;
int ret, irq;
int prop_idx = 0;
@@ -87,6 +89,14 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err;
}
+ memset(&dwc3_xhci_plat_priv, 0, sizeof(struct xhci_plat_priv));
+
+ dwc3_xhci_plat_priv.quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+ ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
+ sizeof(dwc3_xhci_plat_priv));
+ if (ret)
+ goto err;
+
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
--
2.25.1
Add error handling to check NULL input in
mtk_drm_crtc_dma_dev_get function.
While display path is not configured correctly, none of crtc is
established. So the caller of mtk_drm_crtc_dma_dev_get may pass
input parameter *crtc as NULL, Which may cause coredump when
we try to get the container of NULL pointer.
Fixes: cb1d6bcca542 ("drm/mediatek: Add dma dev get function")
Signed-off-by: Stuart Lee <stuart.lee(a)mediatek.com>
Cc: stable(a)vger.kernel.org
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index c277b9fae950..047c9a31d306 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -921,7 +921,14 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
struct device *mtk_drm_crtc_dma_dev_get(struct drm_crtc *crtc)
{
- struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+ struct mtk_drm_crtc *mtk_crtc = NULL;
+
+ if (!crtc)
+ return NULL;
+
+ mtk_crtc = to_mtk_crtc(crtc);
+ if (!mtk_crtc)
+ return NULL;
return mtk_crtc->dma_dev;
}
--
2.18.0