October 2023 - Linux-stable-mirror

FAILED: patch "[PATCH] xhci: Clear EHB bit only at end of interrupt handler" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 15f3ef070933817fac2bcbdb9c85bff9e54e9f80 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101537-marsupial-maroon-fd1e@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 15f3ef070933817fac2bcbdb9c85bff9e54e9f80 Mon Sep 17 00:00:00 2001 From: Lukas Wunner <lukas(a)wunner.de> Date: Fri, 15 Sep 2023 17:31:07 +0300 Subject: [PATCH] xhci: Clear EHB bit only at end of interrupt handler The Event Handler Busy bit shall be cleared by software when the Event Ring is empty. The xHC is thereby informed that it may raise another interrupt once it has enqueued new events (sec 4.17.2). However since commit dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose"), the EHB bit is already cleared after half a segment has been processed. As a result, spurious interrupts may occur: - xhci_irq() processes half a segment, clears EHB, continues processing remaining events. - xHC enqueues new events. Because EHB has been cleared, xHC sets Interrupt Pending bit. Interrupt moderation countdown begins. - Meanwhile xhci_irq() continues processing events. Interrupt moderation countdown reaches zero, so an MSI interrupt is signaled. - xhci_irq() empties the Event Ring, clears EHB again and is done. - Because an MSI interrupt has been signaled, xhci_irq() is run again. It discovers there's nothing to do and returns IRQ_NONE. Avoid by clearing the EHB bit only at the end of xhci_irq(). Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Signed-off-by: Lukas Wunner <lukas(a)wunner.de> Cc: stable(a)vger.kernel.org # v5.5+ Cc: Peter Chen <peter.chen(a)kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-4-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 98389b568633..3e5dc0723a8f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2996,7 +2996,8 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) */ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, struct xhci_interrupter *ir, - union xhci_trb *event_ring_deq) + union xhci_trb *event_ring_deq, + bool clear_ehb) { u64 temp_64; dma_addr_t deq; @@ -3017,12 +3018,13 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, return; /* Update HC event ring dequeue pointer */ - temp_64 &= ERST_PTR_MASK; + temp_64 &= ERST_DESI_MASK; temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); } /* Clear the event handler busy flag (RW1C) */ - temp_64 |= ERST_EHB; + if (clear_ehb) + temp_64 |= ERST_EHB; xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue); } @@ -3103,7 +3105,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) while (xhci_handle_event(xhci, ir) > 0) { if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; - xhci_update_erst_dequeue(xhci, ir, event_ring_deq); + xhci_update_erst_dequeue(xhci, ir, event_ring_deq, false); event_ring_deq = ir->event_ring->dequeue; /* ring is half-full, force isoc trbs to interrupt more often */ @@ -3113,7 +3115,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) event_loop = 0; } - xhci_update_erst_dequeue(xhci, ir, event_ring_deq); + xhci_update_erst_dequeue(xhci, ir, event_ring_deq, true); ret = IRQ_HANDLED; out:

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: Clear EHB bit only at end of interrupt handler" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 15f3ef070933817fac2bcbdb9c85bff9e54e9f80 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101536-existing-google-76ef@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 15f3ef070933817fac2bcbdb9c85bff9e54e9f80 Mon Sep 17 00:00:00 2001 From: Lukas Wunner <lukas(a)wunner.de> Date: Fri, 15 Sep 2023 17:31:07 +0300 Subject: [PATCH] xhci: Clear EHB bit only at end of interrupt handler The Event Handler Busy bit shall be cleared by software when the Event Ring is empty. The xHC is thereby informed that it may raise another interrupt once it has enqueued new events (sec 4.17.2). However since commit dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose"), the EHB bit is already cleared after half a segment has been processed. As a result, spurious interrupts may occur: - xhci_irq() processes half a segment, clears EHB, continues processing remaining events. - xHC enqueues new events. Because EHB has been cleared, xHC sets Interrupt Pending bit. Interrupt moderation countdown begins. - Meanwhile xhci_irq() continues processing events. Interrupt moderation countdown reaches zero, so an MSI interrupt is signaled. - xhci_irq() empties the Event Ring, clears EHB again and is done. - Because an MSI interrupt has been signaled, xhci_irq() is run again. It discovers there's nothing to do and returns IRQ_NONE. Avoid by clearing the EHB bit only at the end of xhci_irq(). Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Signed-off-by: Lukas Wunner <lukas(a)wunner.de> Cc: stable(a)vger.kernel.org # v5.5+ Cc: Peter Chen <peter.chen(a)kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-4-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 98389b568633..3e5dc0723a8f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2996,7 +2996,8 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) */ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, struct xhci_interrupter *ir, - union xhci_trb *event_ring_deq) + union xhci_trb *event_ring_deq, + bool clear_ehb) { u64 temp_64; dma_addr_t deq; @@ -3017,12 +3018,13 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, return; /* Update HC event ring dequeue pointer */ - temp_64 &= ERST_PTR_MASK; + temp_64 &= ERST_DESI_MASK; temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); } /* Clear the event handler busy flag (RW1C) */ - temp_64 |= ERST_EHB; + if (clear_ehb) + temp_64 |= ERST_EHB; xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue); } @@ -3103,7 +3105,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) while (xhci_handle_event(xhci, ir) > 0) { if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; - xhci_update_erst_dequeue(xhci, ir, event_ring_deq); + xhci_update_erst_dequeue(xhci, ir, event_ring_deq, false); event_ring_deq = ir->event_ring->dequeue; /* ring is half-full, force isoc trbs to interrupt more often */ @@ -3113,7 +3115,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) event_loop = 0; } - xhci_update_erst_dequeue(xhci, ir, event_ring_deq); + xhci_update_erst_dequeue(xhci, ir, event_ring_deq, true); ret = IRQ_HANDLED; out:

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101519-had-wrath-b7ca@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101518-legume-speak-a031@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101517-portside-swapping-ca7a@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101515-laziness-saddled-c4b0@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101514-couch-overprice-659c@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

FAILED: patch "[PATCH] xhci: track port suspend state correctly in unsuccessful" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023101513-igloo-irregular-e6de@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d7cdfc319b2bcf6899ab0a05eec0958bc802a9a1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Fri, 15 Sep 2023 17:31:06 +0300 Subject: [PATCH] xhci: track port suspend state correctly in unsuccessful resume cases xhci-hub.c tracks suspended ports in a suspended_port bitfield. This is checked when responding to a Get_Status(PORT) request to see if a port in running U0 state was recently resumed, and adds the required USB_PORT_STAT_C_SUSPEND change bit in those cases. The suspended_port bit was left uncleared if a device is disconnected during suspend. The bit remained set even when a new device was connected and enumerated. The set bit resulted in a incorrect Get_Status(PORT) response with a bogus USB_PORT_STAT_C_SUSPEND change bit set once the new device reached U0 link state. USB_PORT_STAT_C_SUSPEND change bit is only used for USB2 ports, but xhci-hub keeps track of both USB2 and USB3 suspended ports. Cc: stable(a)vger.kernel.org Reported-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Closes: https://lore.kernel.org/linux-usb/d68aa806-b26a-0e43-42fb-b8067325e967@quic… Fixes: 1d5810b6923c ("xhci: Rework port suspend structures for limited ports.") Tested-by: Wesley Cheng <quic_wcheng(a)quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-3-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0054d02239e2..0df5d807a77e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1062,19 +1062,19 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; /* USB3 specific wPortStatus bits */ - if (portsc & PORT_POWER) { + if (portsc & PORT_POWER) *status |= USB_SS_PORT_STAT_POWER; - /* link state handling */ - if (link_state == XDEV_U0) - bus_state->suspended_ports &= ~(1 << portnum); - } - /* remote wake resume signaling complete */ - if (bus_state->port_remote_wakeup & (1 << portnum) && + /* no longer suspended or resuming */ + if (link_state != XDEV_U3 && link_state != XDEV_RESUME && link_state != XDEV_RECOVERY) { - bus_state->port_remote_wakeup &= ~(1 << portnum); - usb_hcd_end_port_resume(&hcd->self, portnum); + /* remote wake resume signaling complete */ + if (bus_state->port_remote_wakeup & (1 << portnum)) { + bus_state->port_remote_wakeup &= ~(1 << portnum); + usb_hcd_end_port_resume(&hcd->self, portnum); + } + bus_state->suspended_ports &= ~(1 << portnum); } xhci_hub_report_usb3_link_state(xhci, status, portsc); @@ -1131,6 +1131,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, usb_hcd_end_port_resume(&port->rhub->hcd->self, portnum); } port->rexit_active = 0; + bus_state->suspended_ports &= ~(1 << portnum); } }

1 year, 3 months

1
0
0 0

[v2] xhci: Keep interrupt disabled in initialization until host is running.

by Prashanth K

From: Hongyu Xie <xy521521(a)gmail.com> [ Upstream commit a808925075fb750804a60ff0710614466c396db4 ] irq is disabled in xhci_quiesce(called by xhci_halt, with bit:2 cleared in USBCMD register), but xhci_run(called by usb_add_hcd) re-enable it. It's possible that you will receive thousands of interrupt requests after initialization for 2.0 roothub. And you will get a lot of warning like, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?". This amount of interrupt requests will cause the entire system to freeze. This problem was first found on a device with ASM2142 host controller on it. [tidy up old code while moving it, reword header -Mathias] Cc: stable(a)kernel.org Signed-off-by: Hongyu Xie <xiehongyu1(a)kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20220623111945.1557702-2-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: <stable(a)vger.kernel.org> # 5.15 Signed-off-by: Prashanth K <quic_prashk(a)quicinc.com> --- v2: Added a missing newline to avoid merge conflicts in future. drivers/usb/host/xhci.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 541fe4d..0803f9b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -607,8 +607,27 @@ static int xhci_init(struct usb_hcd *hcd) static int xhci_run_finished(struct xhci_hcd *xhci) { + unsigned long flags; + u32 temp; + + /* + * Enable interrupts before starting the host (xhci 4.2 and 5.5.2). + * Protect the short window before host is running with a lock + */ + spin_lock_irqsave(&xhci->lock, flags); + + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable interrupts"); + temp = readl(&xhci->op_regs->command); + temp |= (CMD_EIE); + writel(temp, &xhci->op_regs->command); + + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Enable primary interrupter"); + temp = readl(&xhci->ir_set->irq_pending); + writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); + if (xhci_start(xhci)) { xhci_halt(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); return -ENODEV; } xhci->shared_hcd->state = HC_STATE_RUNNING; @@ -619,6 +638,9 @@ static int xhci_run_finished(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB3 roothub"); + + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; } @@ -667,19 +689,6 @@ int xhci_run(struct usb_hcd *hcd) temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK; writel(temp, &xhci->ir_set->irq_control); - /* Set the HCD state before we enable the irqs */ - temp = readl(&xhci->op_regs->command); - temp |= (CMD_EIE); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Enable interrupts, cmd = 0x%x.", temp); - writel(temp, &xhci->op_regs->command); - - temp = readl(&xhci->ir_set->irq_pending); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Enabling event ring interrupter %p by writing 0x%x to irq_pending", - xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); - writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - if (xhci->quirks & XHCI_NEC_HOST) { struct xhci_command *command; -- 2.7.4

1 year, 3 months

2
1
0 0

[PATCH 5.10 0/3] net: add sysctl accept_ra_min_lft

by Patrick Rohr

I am following up on https://lore.kernel.org/stable/20230925211034.905320-1-prohr@google.com/ with cherry-picks for 5.10.198. I have run our test suite with the changes applied and all relevant tests passed. Thanks, -Patrick Patrick Rohr (3): net: add sysctl accept_ra_min_rtr_lft net: change accept_ra_min_rtr_lft to affect all RA lifetimes net: release reference to inet6_dev pointer Documentation/networking/ip-sysctl.rst | 8 ++++++++ include/linux/ipv6.h | 1 + include/uapi/linux/ipv6.h | 7 +++++++ net/ipv6/addrconf.c | 13 +++++++++++++ net/ipv6/ndisc.c | 13 +++++++++++-- 5 files changed, 40 insertions(+), 2 deletions(-) -- 2.42.0.655.g421f12c284-goog

1 year, 3 months

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2023