Dear victim,
this Is National Crime Investigation Center USA.
In our Investigation from banks on International and National Funds
Transfer (INFT) protocols In The past 10 years from all banks
Worldwide. We have come across your contact details and record with
One of this Bank. in view of The carried Investigations, we have
Contacted you confidentially for vital Information toward your
transactions with This bank. It was clear That The bank have delayed
Your payment Thereby looking for a means to divert your fund to
Different Individual account not belonging to you.
How ever, all bank officials who mishandled your Transaction has been
Duly sacked and management dissolved and dismissed from bank work as a
Result of This attempt. Upon our Investigation conclusion, we found
Out that your Transaction was Legitimate and for This reason, a
Compensation Amount of $3,150,567.00 (Three million one hundred and
Fifty thousand, five hundred and sixty seven dollars) has been
Allocated to you for Immediate payment through our accredited bank,
Platinum Federal Credit Union USA. Kindly contact the compensation
paying officer with The below details.
Email: mrs.sophiar.robin424(a)gmail.com,
Yours Sincerely
mrs.sophiar.robin,
The LPUART hardware doesn't zero out the parity bit on the received
characters. This behavior won't impact the use cases of CS8 because
the parity bit is the 9th bit which is not currently used by software.
But the parity bit for CS7 must be zeroed out by software in order to
get the correct raw data.
Signed-off-by: Shenwei Wang <shenwei.wang(a)nxp.com>
---
changes in v2
- remove the "inline" keyword from the function of lpuart_tty_insert_flip_string;
changes in v1
- fix the code indent and whitespace issue;
drivers/tty/serial/fsl_lpuart.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index fc7d235a1e270..afa0f941c862f 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -274,6 +274,8 @@ struct lpuart_port {
int rx_dma_rng_buf_len;
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
+ bool is_cs7; /* Set to true when character size is 7 */
+ /* and the parity is enabled */
};
struct lpuart_soc_data {
@@ -1022,6 +1024,9 @@ static void lpuart32_rxint(struct lpuart_port *sport)
flg = TTY_OVERRUN;
}
+ if (sport->is_cs7)
+ rx &= 0x7F;
+
if (tty_insert_flip_char(port, rx, flg) == 0)
sport->port.icount.buf_overrun++;
}
@@ -1107,6 +1112,17 @@ static void lpuart_handle_sysrq(struct lpuart_port *sport)
}
}
+static int lpuart_tty_insert_flip_string(struct tty_port *port,
+ unsigned char *chars, size_t size, bool is_cs7)
+{
+ int i;
+
+ if (is_cs7)
+ for (i = 0; i < size; i++)
+ chars[i] &= 0x7F;
+ return tty_insert_flip_string(port, chars, size);
+}
+
static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
{
struct tty_port *port = &sport->port.state->port;
@@ -1217,7 +1233,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
if (ring->head < ring->tail) {
count = sport->rx_sgl.length - ring->tail;
- copied = tty_insert_flip_string(port, ring->buf + ring->tail, count);
+ copied = lpuart_tty_insert_flip_string(port, ring->buf + ring->tail,
+ count, sport->is_cs7);
if (copied != count)
sport->port.icount.buf_overrun++;
ring->tail = 0;
@@ -1227,7 +1244,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
/* Finally we read data from tail to head */
if (ring->tail < ring->head) {
count = ring->head - ring->tail;
- copied = tty_insert_flip_string(port, ring->buf + ring->tail, count);
+ copied = lpuart_tty_insert_flip_string(port, ring->buf + ring->tail,
+ count, sport->is_cs7);
if (copied != count)
sport->port.icount.buf_overrun++;
/* Wrap ring->head if needed */
@@ -2066,6 +2084,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
bd = lpuart32_read(&sport->port, UARTBAUD);
modem = lpuart32_read(&sport->port, UARTMODIR);
+ sport->is_cs7 = false;
/*
* only support CS8 and CS7, and for CS7 must enable PE.
* supported mode:
@@ -2184,6 +2203,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
lpuart32_write(&sport->port, ctrl, UARTCTRL);
/* restore control register */
+ if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
+ sport->is_cs7 = true;
+
if (old && sport->lpuart_dma_rx_use) {
if (!lpuart_start_rx_dma(sport))
rx_dma_timer_init(sport);
--
2.25.1