[ Upstream commit 72ed3ee9fa0b461ad086403a8b5336154bd82234 ]
As a carry over from the CAN_RAW socket (which allows to change the CAN
interface while mantaining the filter setup) the re-binding of the
CAN_ISOTP socket needs to take care about CAN ID address information and
subscriptions. It turned out that this feature is so limited (e.g. the
sockopts remain fix) that it finally has never been needed/used.
In opposite to the stateless CAN_RAW socket the switching of the CAN ID
subscriptions might additionally lead to an interrupted ongoing PDU
reception. So better remove this unneeded complexity.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220422082337.1676-1-socketcan@hartkopp.net
Cc: stable(a)vger.kernel.org
Signed-off-by: Oliver Hartkopp <socketcan(a)hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de>
---
net/can/isotp.c | 22 +++++-----------------
1 file changed, 5 insertions(+), 17 deletions(-)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index c515bbd46c67..f2f0bc7f0cb4 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1142,24 +1142,25 @@ static int isotp_bind(struct socket *sock, struct sockaddr *uaddr, int len)
if (!addr->can_ifindex)
return -ENODEV;
lock_sock(sk);
+ if (so->bound) {
+ err = -EINVAL;
+ goto out;
+ }
+
/* do not register frame reception for functional addressing */
if (so->opt.flags & CAN_ISOTP_SF_BROADCAST)
do_rx_reg = 0;
/* do not validate rx address for functional addressing */
if (do_rx_reg && rx_id == tx_id) {
err = -EADDRNOTAVAIL;
goto out;
}
- if (so->bound && addr->can_ifindex == so->ifindex &&
- rx_id == so->rxid && tx_id == so->txid)
- goto out;
-
dev = dev_get_by_index(net, addr->can_ifindex);
if (!dev) {
err = -ENODEV;
goto out;
}
@@ -1182,23 +1183,10 @@ static int isotp_bind(struct socket *sock, struct sockaddr *uaddr, int len)
can_rx_register(net, dev, rx_id, SINGLE_MASK(rx_id),
isotp_rcv, sk, "isotp", sk);
dev_put(dev);
- if (so->bound && do_rx_reg) {
- /* unregister old filter */
- if (so->ifindex) {
- dev = dev_get_by_index(net, so->ifindex);
- if (dev) {
- can_rx_unregister(net, dev, so->rxid,
- SINGLE_MASK(so->rxid),
- isotp_rcv, sk);
- dev_put(dev);
- }
- }
- }
-
/* switch to new settings */
so->ifindex = ifindex;
so->rxid = rx_id;
so->txid = tx_id;
so->bound = 1;
--
2.30.2
From: Fabio Estevam <festevam(a)denx.de>
Since commit f1131b9c23fb ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: stable(a)vger.kernel.org
Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <festevam(a)denx.de>
---
Changes since v1:
- Explained why enphy_suspend/resume solution is preferred (Andrew).
drivers/net/phy/micrel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 685a0ab5453c..11cd073630e5 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -3021,8 +3021,8 @@ static struct phy_driver ksphy_driver[] = {
.config_init = ksz8061_config_init,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
- .suspend = kszphy_suspend,
- .resume = kszphy_resume,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
--
2.25.1
H e l l o,
I lead family investment vehicles who want to invest a proportion of their funds with a trust party .
Please are you interested in discussing investment in your sector?
Please email, or simply write to me here: allen.large(a)cheapnet.it I value promptness and will make every attempt to respond within a short time.
Thank you.
Allen S.