The patch below does not apply to the 5.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dda81d9761d07541c404dd5fa93e773a8eda5ddc Mon Sep 17 00:00:00 2001
From: tiancyin <tianci.yin(a)amd.com>
Date: Sun, 27 Mar 2022 19:07:13 +0800
Subject: [PATCH] drm/amd/vcn: fix an error msg on vcn 3.0
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu(a)amd.com>
Signed-off-by: tiancyin <tianci.yin(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
index e1cca0a10653..cb5f0a12333f 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -1488,7 +1488,7 @@ static int vcn_v3_0_stop_dpg_mode(struct amdgpu_device *adev, int inst_idx)
struct dpg_pause_state state = {.fw_based = VCN_DPG_STATE__UNPAUSE};
uint32_t tmp;
- vcn_v3_0_pause_dpg_mode(adev, 0, &state);
+ vcn_v3_0_pause_dpg_mode(adev, inst_idx, &state);
/* Wait for power status to be 1 */
SOC15_WAIT_ON_RREG(VCN, inst_idx, mmUVD_POWER_STATUS, 1,
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dda81d9761d07541c404dd5fa93e773a8eda5ddc Mon Sep 17 00:00:00 2001
From: tiancyin <tianci.yin(a)amd.com>
Date: Sun, 27 Mar 2022 19:07:13 +0800
Subject: [PATCH] drm/amd/vcn: fix an error msg on vcn 3.0
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu(a)amd.com>
Signed-off-by: tiancyin <tianci.yin(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
index e1cca0a10653..cb5f0a12333f 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -1488,7 +1488,7 @@ static int vcn_v3_0_stop_dpg_mode(struct amdgpu_device *adev, int inst_idx)
struct dpg_pause_state state = {.fw_based = VCN_DPG_STATE__UNPAUSE};
uint32_t tmp;
- vcn_v3_0_pause_dpg_mode(adev, 0, &state);
+ vcn_v3_0_pause_dpg_mode(adev, inst_idx, &state);
/* Wait for power status to be 1 */
SOC15_WAIT_ON_RREG(VCN, inst_idx, mmUVD_POWER_STATUS, 1,
The patch below does not apply to the 5.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dda81d9761d07541c404dd5fa93e773a8eda5ddc Mon Sep 17 00:00:00 2001
From: tiancyin <tianci.yin(a)amd.com>
Date: Sun, 27 Mar 2022 19:07:13 +0800
Subject: [PATCH] drm/amd/vcn: fix an error msg on vcn 3.0
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu(a)amd.com>
Signed-off-by: tiancyin <tianci.yin(a)amd.com>
Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com>
Cc: stable(a)vger.kernel.org
diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
index e1cca0a10653..cb5f0a12333f 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c
@@ -1488,7 +1488,7 @@ static int vcn_v3_0_stop_dpg_mode(struct amdgpu_device *adev, int inst_idx)
struct dpg_pause_state state = {.fw_based = VCN_DPG_STATE__UNPAUSE};
uint32_t tmp;
- vcn_v3_0_pause_dpg_mode(adev, 0, &state);
+ vcn_v3_0_pause_dpg_mode(adev, inst_idx, &state);
/* Wait for power status to be 1 */
SOC15_WAIT_ON_RREG(VCN, inst_idx, mmUVD_POWER_STATUS, 1,
Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.
Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.
Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").
Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable(a)vger.kernel.org # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/tty/serial/imx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index fd38e6ed4fda..a2100be8d554 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1448,7 +1448,7 @@ static int imx_uart_startup(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR);
- if (!sport->dma_is_enabled)
+ if (!dma_is_inited)
ucr4 |= UCR4_OREN;
if (sport->inverted_rx)
ucr4 |= UCR4_INVR;
--
2.35.1
The patch below does not apply to the 5.17-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From af704c856e888fb044b058d731d61b46eeec499d Mon Sep 17 00:00:00 2001
From: "Jason A. Donenfeld" <Jason(a)zx2c4.com>
Date: Mon, 21 Mar 2022 18:48:05 -0600
Subject: [PATCH] random: skip fast_init if hwrng provides large chunk of
entropy
At boot time, EFI calls add_bootloader_randomness(), which in turn calls
add_hwgenerator_randomness(). Currently add_hwgenerator_randomness()
feeds the first 64 bytes of randomness to the "fast init"
non-crypto-grade phase. But if add_hwgenerator_randomness() gets called
with more than POOL_MIN_BITS of entropy, there's no point in passing it
off to the "fast init" stage, since that's enough entropy to bootstrap
the real RNG. The "fast init" stage is just there to provide _something_
in the case where we don't have enough entropy to properly bootstrap the
RNG. But if we do have enough entropy to bootstrap the RNG, the current
logic doesn't serve a purpose. So, in the case where we're passed
greater than or equal to POOL_MIN_BITS of entropy, this commit makes us
skip the "fast init" phase.
Cc: Dominik Brodowski <linux(a)dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com>
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 66ce7c03a142..74e0b069972e 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1128,7 +1128,7 @@ void rand_initialize_disk(struct gendisk *disk)
void add_hwgenerator_randomness(const void *buffer, size_t count,
size_t entropy)
{
- if (unlikely(crng_init == 0)) {
+ if (unlikely(crng_init == 0 && entropy < POOL_MIN_BITS)) {
size_t ret = crng_pre_init_inject(buffer, count, true);
mix_pool_bytes(buffer, ret);
count -= ret;