From: Andre Przywara <andre.przywara(a)arm.com>
[ Upstream commit 0f607406525d25019dd9c498bcc0b42734fc59d5 ]
The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.
Name all those properties in a new config struct and assign a new
compatible name to it.
Signed-off-by: Andre Przywara <andre.przywara(a)arm.com>
Reviewed-by: Samuel Holland <samuel(a)sholland.org>
Link: https://lore.kernel.org/r/20221031111358.3387297-5-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 651d5e2a25ce..230987e55ece 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -974,6 +974,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
.missing_phys = BIT(1) | BIT(2),
};
+static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
+ .num_phys = 4,
+ .type = sun50i_h6_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .phy0_dual_route = true,
+ .hci_phy_ctl_clear = PHY_CTL_SIDDQ,
+ .needs_phy2_siddq = true,
+};
+
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -988,6 +999,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+ { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
--
2.35.1
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index c4d19b88d17d..2001bc774c64 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -437,6 +437,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Advantech MICA-071 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"),
+ },
+ /* OVCD Th = 1500uA to reliable detect head-phones vs -set */
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
--
2.35.1
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 7830d014d924..6a8edb0a559d 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -428,6 +428,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Advantech MICA-071 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"),
+ },
+ /* OVCD Th = 1500uA to reliable detect head-phones vs -set */
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
--
2.35.1
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 3020a993f6ef..8a99cb6dfcd6 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -430,6 +430,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Advantech MICA-071 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"),
+ },
+ /* OVCD Th = 1500uA to reliable detect head-phones vs -set */
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
--
2.35.1
From: Hans de Goede <hdegoede(a)redhat.com>
[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede(a)redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index f9c82ebc552c..888e04c57757 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -570,6 +570,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Advantech MICA-071 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"),
+ },
+ /* OVCD Th = 1500uA to reliable detect head-phones vs -set */
+ .driver_data = (void *)(BYT_RT5640_IN3_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_1500UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
--
2.35.1
From: Maciej Żenczykowski <maze(a)google.com>
Since November 2017 commit 7fee72d5e8f1 ("uas: Always apply US_FL_NO_ATA_1X
quirk to Seagate devices"), the US_FL_NO_ATA_1X is always set for Seagate
devices, but it doesn't appear to be required - at least for this one
(based on internet searches, probably for a fair number more...).
ID 0bc2:2320 Seagate RSS LLC USB 3.0 bridge [Portable Expansion Drive]
Confirmed via:
smartctl -a /dev/sda
working fine with
modprobe usb_storage quirks=0bc2:2320:
on
5.19.11-1rodete1-amd64
Fixes: 7fee72d5e8f1 ("uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices")
Cc: stable <stable(a)vger.kernel.org>
Cc: Hans de Goede <hdegoede(a)redhat.com>
Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <zenczykowski(a)gmail.com>
---
drivers/usb/storage/uas-detect.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 3f720faa6f97..74d65810f09a 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -112,8 +112,9 @@ static int uas_use_uas_driver(struct usb_interface *intf,
}
}
- /* All Seagate disk enclosures have broken ATA pass-through support */
- if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2)
+ /* Most Seagate disk enclosures have broken ATA pass-through support */
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2 &&
+ le16_to_cpu(udev->descriptor.idProduct) != 0x2320)
flags |= US_FL_NO_ATA_1X;
usb_stor_adjust_quirks(udev, &flags);
--
2.39.0.314.g84b9a713c41-goog