The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel(a)kernel.org>
Date: Wed, 19 Jan 2022 17:44:55 +0100
Subject: [PATCH] net: sfp: ignore disabled SFP node
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices
and sfp cages") added code which finds SFP bus DT node even if the node
is disabled with status = "disabled". Because of this, when phylink is
created, it ends with non-null .sfp_bus member, even though the SFP
module is not probed (because the node is disabled).
We need to ignore disabled SFP bus node.
Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Marek Behún <kabel(a)kernel.org>
Cc: stable(a)vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: David S. Miller <davem(a)davemloft.net>
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 0c6c0d1843bc..c1512c9925a6 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -651,6 +651,11 @@ struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
else if (ret < 0)
return ERR_PTR(ret);
+ if (!fwnode_device_is_available(ref.fwnode)) {
+ fwnode_handle_put(ref.fwnode);
+ return NULL;
+ }
+
bus = sfp_bus_get(ref.fwnode);
fwnode_handle_put(ref.fwnode);
if (!bus)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel(a)kernel.org>
Date: Wed, 19 Jan 2022 17:44:55 +0100
Subject: [PATCH] net: sfp: ignore disabled SFP node
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices
and sfp cages") added code which finds SFP bus DT node even if the node
is disabled with status = "disabled". Because of this, when phylink is
created, it ends with non-null .sfp_bus member, even though the SFP
module is not probed (because the node is disabled).
We need to ignore disabled SFP bus node.
Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Marek Behún <kabel(a)kernel.org>
Cc: stable(a)vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: David S. Miller <davem(a)davemloft.net>
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 0c6c0d1843bc..c1512c9925a6 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -651,6 +651,11 @@ struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
else if (ret < 0)
return ERR_PTR(ret);
+ if (!fwnode_device_is_available(ref.fwnode)) {
+ fwnode_handle_put(ref.fwnode);
+ return NULL;
+ }
+
bus = sfp_bus_get(ref.fwnode);
fwnode_handle_put(ref.fwnode);
if (!bus)
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2148927e6ed43a1667baf7c2ae3e0e05a44b51a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel(a)kernel.org>
Date: Wed, 19 Jan 2022 17:44:55 +0100
Subject: [PATCH] net: sfp: ignore disabled SFP node
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices
and sfp cages") added code which finds SFP bus DT node even if the node
is disabled with status = "disabled". Because of this, when phylink is
created, it ends with non-null .sfp_bus member, even though the SFP
module is not probed (because the node is disabled).
We need to ignore disabled SFP bus node.
Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Marek Behún <kabel(a)kernel.org>
Cc: stable(a)vger.kernel.org # 2203cbf2c8b5 ("net: sfp: move fwnode parsing into sfp-bus layer")
Signed-off-by: David S. Miller <davem(a)davemloft.net>
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 0c6c0d1843bc..c1512c9925a6 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -651,6 +651,11 @@ struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
else if (ret < 0)
return ERR_PTR(ret);
+ if (!fwnode_device_is_available(ref.fwnode)) {
+ fwnode_handle_put(ref.fwnode);
+ return NULL;
+ }
+
bus = sfp_bus_get(ref.fwnode);
fwnode_handle_put(ref.fwnode);
if (!bus)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;