From: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding(a)gmail.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/pwm/pwm-img.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 3b0a097ce2ab..6111e8848b07 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -332,23 +332,7 @@ static int img_pwm_probe(struct platform_device *pdev)
static int img_pwm_remove(struct platform_device *pdev)
{
struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
- u32 val;
- unsigned int i;
- int ret;
-
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put(&pdev->dev);
- return ret;
- }
-
- for (i = 0; i < pwm_chip->chip.npwm; i++) {
- val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
- val &= ~BIT(i);
- img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
- }
- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
img_pwm_runtime_suspend(&pdev->dev);
--
2.30.2
From: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding(a)gmail.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/pwm/pwm-img.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 22c002e685b3..37f9b688661d 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -329,23 +329,7 @@ static int img_pwm_probe(struct platform_device *pdev)
static int img_pwm_remove(struct platform_device *pdev)
{
struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
- u32 val;
- unsigned int i;
- int ret;
-
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put(&pdev->dev);
- return ret;
- }
-
- for (i = 0; i < pwm_chip->chip.npwm; i++) {
- val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
- val &= ~BIT(i);
- img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
- }
- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
img_pwm_runtime_suspend(&pdev->dev);
--
2.30.2
On Thu, Sep 16, 2021 at 6:50 PM OPENSOURCE Lukas Hannen
<lukas.hannen(a)opensource.tttech-industrial.com> wrote:
>
> > I can see how this helps the ptp_clock_adjtime() users, but I just double-checked what
> > other callers exist, and I think it introduces a regression in setitimer(), which does
> >
> > nval = timespec64_to_ns(&value->it_value);
> > ninterval = timespec64_to_ns(&value->it_interval);
> >
> > without any further range checking that I could find. Setting timers with negative intervals
> > sounds like a bad idea, and interpreting negative it_value as a past time instead of KTIME_SEC_MAX
> > sounds like an unintended interface change.
>
> Hello Arnd,
>
> I have looked into this, and it seems like before your
> commit bd40a175769d ("y2038: itimer: change implementation to timespec64")
> the "clamping and converting to positive ns" was done using timeval_to_ktime()
> and ktime_to_ns().
Actually, looking back at this change, I see that there was an
explicit timeval_valid()
check in get_itimerval(), and this was moved around but is still
there, I guess we're
good for this syscall, and the user-visible behavior never actually changed.
> When Commit c5021b2547ad ( "time: Prevent undefined behaviour in timespec64_to_ns()" )
> put this functionally into timespec64_to_ns(), the patchnotes mentioned the clamping to
> KTIME_SEC_MAX, but did not mention the explicit need to return KTIME_SEC_MAX for any
> negative input.
Right.
> Since timespec64_to_ns() is widely used in drivers, where negative nanosecond values are
> quite sensible, I propose to view both of the effects I mentioned above as separate functionalities,
>
> either to be implemented as separate functions in time64.h (named, for example, timespec64_to_ns()
> and timespec64_to_positive_ns),
I don't mind having the common version work the way it does after your patch, I
was only worried about silently changing the behavior for a documented syscall.
> or alternatively, since the setitimer() code seems to be the only one not expecting negative nanoseconds
> out of timespec64_to_ns() when fed negative input, the clamping of negative nanosecond values
> to KTIME_SEC_MAX to be moved into the setitimer() code, and timespec64_to_ns() to be changed
> according to the patch I submitted.
>
> Both of those alternatives seem trivial and I can send in patches for both of them,
> but since this is more a matter of style I would like to hear your opinions on this beforehand.
It looks like we don't have to do anything for setitimer(), but that
was just the first one that
I happened to look at. Did you check the other instances to see if
anything might be going
wrong there? If they are all good, then I have no other concerns and
we should probably
put your fix back into the stable kernels (Greg has just reverted it
after my initial mail).
I went through all instances other than the ptp related ones, and I'm
pretty confident
that they are all good now, in each case either your patch fixes a bug
or the value is
already known to be positive and it doesn't matter. Are you confident
that the ptp
instances are all good as well?
I did stumble over one small detail:
if (ts->tv_sec <= KTIME_SEC_MIN)
return KTIME_MIN;
I think this is not entirely correct for the case of tv_sec==KTIME_SEC_MIN
with a nonzero tv_nsec, as we now round down to the full second. Not sure
if that's worth changing, as we also round up for any value between
KTIME_SEC_MAX*NSEC_PER_SEC and KTIME_MAX, or between
KTIME_MIN and KTIME_SEC_MIN*NSEC_PER_SEC.
In practice I guess we care very little about the last nanosecond in the corner
cases.
Arnd
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: cf1d4abe7d70 - Revert "time: Handle negative seconds correctly in timespec64_to_ns()"
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Targeted tests: NO
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ stress: stress-ng
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Reboot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
⚡⚡⚡ LTP - pty
⚡⚡⚡ LTP - ipc
⚡⚡⚡ LTP - tracing
⚡⚡⚡ CIFS Connectathon
⚡⚡⚡ POSIX pjd-fstest suites
⚡⚡⚡ NFS Connectathon
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ jvm - jcstress tests
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking cki netfilter test
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: dm/common
⚡⚡⚡ storage: SCSI VPD
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ xarray-idr-radixtree-test
🚧 ⚡⚡⚡ i2c: i2cdetect sanity
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Networking: igmp conformance test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ lvm cache test
🚧 ⚡⚡⚡ lvm snapper test
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ stress: stress-ng
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ stress: stress-ng
ppc64le:
Host 1:
✅ Boot test
✅ Reboot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ IPMI driver test
✅ IPMItool loop stress test
✅ selinux-policy: serge-testsuite
✅ Storage blktests - blk
✅ Storage block - filesystem fio test
✅ Storage block - queue scheduler test
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
🚧 ✅ Podman system test - as root
🚧 ✅ Podman system test - as user
🚧 ✅ xfstests - btrfs
🚧 ✅ Storage blktests - nvme-tcp
🚧 ❌ Storage blktests - nvmeof-mp
🚧 ❌ Storage blktests - srp
🚧 ✅ Storage: lvm device-mapper test - upstream
Host 2:
✅ Boot test
✅ Reboot test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: dm/common
✅ trace: ftrace/tracer
🚧 ✅ xarray-idr-radixtree-test
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
🚧 ✅ lvm cache test
🚧 ✅ lvm snapper test
s390x:
Host 1:
✅ Boot test
✅ Reboot test
✅ selinux-policy: serge-testsuite
✅ Storage blktests - blk
✅ Storage: swraid mdadm raid_module test
🚧 ❌ Podman system test - as root
🚧 ❌ Podman system test - as user
🚧 ✅ Storage blktests - nvme-tcp
🚧 ❌ Storage blktests - nvmeof-mp
🚧 ✅ Storage blktests - srp
🚧 ✅ stress: stress-ng
Host 2:
✅ Boot test
✅ Reboot test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ storage: dm/common
✅ trace: ftrace/tracer
🚧 ❌ xarray-idr-radixtree-test
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
🚧 ✅ lvm cache test
🚧 ✅ lvm snapper test
x86_64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ xfstests - nfsv4.2
⚡⚡⚡ xfstests - cifsv3.11
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ power-management: cpupower/sanity test
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ Storage: lvm device-mapper test - upstream
🚧 ⚡⚡⚡ stress: stress-ng
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Reboot test
✅ ACPI table test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: dm/common
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ✅ xarray-idr-radixtree-test
🚧 ✅ i2c: i2cdetect sanity
🚧 ✅ Firmware test suite
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking: igmp conformance test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ lvm cache test
🚧 ⚡⚡⚡ lvm snapper test
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ xfstests - nfsv4.2
⚡⚡⚡ xfstests - cifsv3.11
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ power-management: cpupower/sanity test
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ Storage: lvm device-mapper test - upstream
🚧 ⚡⚡⚡ stress: stress-ng
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ xfstests - nfsv4.2
⚡⚡⚡ xfstests - cifsv3.11
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ power-management: cpupower/sanity test
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage blktests - nvmeof-mp
🚧 ⚡⚡⚡ Storage blktests - srp
🚧 ⚡⚡⚡ Storage: lvm device-mapper test - upstream
🚧 ⚡⚡⚡ stress: stress-ng
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Targeted tests
--------------
Test runs for patches always include a set of base tests, plus some
tests chosen based on the file paths modified by the patch. The latter
are called "targeted tests". If no targeted tests are run, that means
no patch-specific tests are available. Please, consider contributing a
targeted test for related patches to increase test coverage. See
https://docs.engineering.redhat.com/x/_wEZB for more details.
When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.
This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.
Fixes: bc0ee47603647 (arm64/sve: Core task context handling)
Signed-off-by: Mark Brown <broonie(a)kernel.org>
Cc: stable(a)vger.kernel.org
---
arch/arm64/kernel/fpsimd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5a294f20e9de..ff4962750b3d 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -513,7 +513,7 @@ size_t sve_state_size(struct task_struct const *task)
void sve_alloc(struct task_struct *task)
{
if (task->thread.sve_state) {
- memset(task->thread.sve_state, 0, sve_state_size(current));
+ memset(task->thread.sve_state, 0, sve_state_size(task));
return;
}
--
2.20.1