Previously, we noticed the one rpma example was failed[1] since 36f30e486d,
where it will use ODP feature to do RDMA WRITE between fsdax files.
After digging into the code, we found hmm_vma_handle_pte() will still
return EFAULT even though all the its requesting flags has been
fulfilled. That's because a DAX page will be marked as
(_PAGE_SPECIAL | PAGE_DEVMAP) by pte_mkdevmap().
[1]: https://github.com/pmem/rpma/issues/1142
CC: stable(a)vger.kernel.org
Fixes: 405506274922 ("mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling")
Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com>
---
V3: adjust the checking order
---
mm/hmm.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/hmm.c b/mm/hmm.c
index fad6be2bf072..842e26599238 100644
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -295,10 +295,13 @@ static int hmm_vma_handle_pte(struct mm_walk *walk, unsigned long addr,
goto fault;
/*
+ * Bypass devmap pte such as DAX page when all pfn requested
+ * flags(pfn_req_flags) are fulfilled.
* Since each architecture defines a struct page for the zero page, just
* fall through and treat it like a normal page.
*/
- if (pte_special(pte) && !is_zero_pfn(pte_pfn(pte))) {
+ if (pte_special(pte) && !pte_devmap(pte) &&
+ !is_zero_pfn(pte_pfn(pte))) {
if (hmm_pte_need_fault(hmm_vma_walk, pfn_req_flags, 0)) {
pte_unmap(ptep);
return -EFAULT;
--
2.31.1
From: Michał Mirosław <mirq-linux(a)rere.qmqm.pl>
[ Upstream commit 335ffab3ef864539e814b9a2903b0ae420c1c067 ]
This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.
Signed-off-by: Michał Mirosław <mirq-linux(a)rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/base/power/opp/of.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c
index 87509cb69f79..68ae8e9c1edc 100644
--- a/drivers/base/power/opp/of.c
+++ b/drivers/base/power/opp/of.c
@@ -402,8 +402,9 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
}
}
- /* There should be one of more OPP defined */
- if (WARN_ON(!count)) {
+ /* There should be one or more OPPs defined */
+ if (!count) {
+ dev_err(dev, "%s: no supported OPPs", __func__);
ret = -ENOENT;
goto put_opp_table;
}
--
2.30.2
From: Shai Malin <smalin(a)marvell.com>
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]
For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.
Signed-off-by: Prabhakar Kushwaha <pkushwaha(a)marvell.com>
Signed-off-by: Ariel Elior <aelior(a)marvell.com>
Signed-off-by: Shai Malin <smalin(a)marvell.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 708117fc6f73..7669d36151c6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -374,7 +374,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
rc = cnt;
}
- if (rc > 0) {
+ /* For VFs, we should return with an error in case we didn't get the
+ * exact number of msix vectors as we requested.
+ * Not doing that will lead to a crash when starting queues for
+ * this VF.
+ */
+ if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
/* MSI-x configuration was achieved */
int_params->out.int_mode = QED_INT_MODE_MSIX;
int_params->out.num_vectors = rc;
--
2.30.2
From: Shai Malin <smalin(a)marvell.com>
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]
For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.
Signed-off-by: Prabhakar Kushwaha <pkushwaha(a)marvell.com>
Signed-off-by: Ariel Elior <aelior(a)marvell.com>
Signed-off-by: Shai Malin <smalin(a)marvell.com>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 52e747fd9c83..62d514b60e23 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -437,7 +437,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
rc = cnt;
}
- if (rc > 0) {
+ /* For VFs, we should return with an error in case we didn't get the
+ * exact number of msix vectors as we requested.
+ * Not doing that will lead to a crash when starting queues for
+ * this VF.
+ */
+ if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
/* MSI-x configuration was achieved */
int_params->out.int_mode = QED_INT_MODE_MSIX;
int_params->out.num_vectors = rc;
--
2.30.2