March 2021 - Linux-stable-mirror

[PATCH 0/3] usb: dwc2: Fix power saving general issues.

by Artur Petrosyan

This patch set is part of multiple series and is continuation of the "usb: dwc2: Fix and improve power saving modes" patch set. (Patch set link: https://marc.info/?l=linux-usb&m=160379622403975&w=2). The patches that were included in the "usb: dwc2: Fix and improve power saving modes" which was submitted earlier was too large and needed to be split up into smaller patch sets. So this is the first series in the whole power saving mode fixes. Each remaining patch set have dependency on previous set and will be submitted after each of them are integrated. The series includes the following patch sets with multiple patches by below order. 1. usb: dwc2: Fix power saving general issues. 2. usb: dwc2: Fix Partial Power down issues. 3. usb: dwc2: Add clock gating support. 4. usb: dwc2: Fix Hibernation issues Changes since V1: - Added Fixes tag and stable kernel in below patches to point to the commits the fixes are addressing 1. "usb: dwc2: Prevent core suspend when port connection flag is 0" 2. "usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board." - Updated the changelog of "usb: dwc2: Add default param to control power optimization." patch. Artur Petrosyan (3): usb: dwc2: Add default param to control power optimization. usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. usb: dwc2: Prevent core suspend when port connection flag is 0 drivers/usb/dwc2/core.h | 3 +++ drivers/usb/dwc2/debugfs.c | 2 ++ drivers/usb/dwc2/hcd.c | 5 +++-- drivers/usb/dwc2/params.c | 17 ++++++++++++----- 4 files changed, 20 insertions(+), 7 deletions(-) -- 2.25.1

3 years, 9 months

2
3
0 0

patch "usb: dwc2: Prevent core suspend when port connection flag is 0" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Prevent core suspend when port connection flag is 0 to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 93f672804bf2d7a49ef3fd96827ea6290ca1841e Mon Sep 17 00:00:00 2001 From: Artur Petrosyan <Arthur.Petrosyan(a)synopsys.com> Date: Fri, 26 Mar 2021 14:25:09 +0400 Subject: usb: dwc2: Prevent core suspend when port connection flag is 0 In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: <stable(a)vger.kernel.org> # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan(a)synopsys.com> Link: https://lore.kernel.org/r/20210326102510.BDEDEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 40e5655921bf..1a9789ec5847 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4322,7 +4322,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) goto unlock; - if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) + if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL || + hsotg->flags.b.port_connect_status == 0) goto skip_power_saving; /* -- 2.31.0

3 years, 9 months

1
0
0 0

patch "usb: musb: Fix suspend with devices connected for a64" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: musb: Fix suspend with devices connected for a64 to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 92af4fc6ec331228aca322ca37c8aea7b150a151 Mon Sep 17 00:00:00 2001 From: Tony Lindgren <tony(a)atomide.com> Date: Wed, 24 Mar 2021 09:11:41 +0200 Subject: usb: musb: Fix suspend with devices connected for a64 Pinephone running on Allwinner A64 fails to suspend with USB devices connected as reported by Bhushan Shah <bshah(a)kde.org>. Reverting commit 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") fixes the issue. Let's add suspend checks also for suspend after disconnect interrupt quirk handling like we already do elsewhere. Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt") Reported-by: Bhushan Shah <bshah(a)kde.org> Tested-by: Bhushan Shah <bshah(a)kde.org> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/musb/musb_core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1cd87729ba60..fc0457db62e1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2004,10 +2004,14 @@ static void musb_pm_runtime_check_session(struct musb *musb) MUSB_DEVCTL_HR; switch (devctl & ~s) { case MUSB_QUIRK_B_DISCONNECT_99: - musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n"); - schedule_delayed_work(&musb->irq_work, - msecs_to_jiffies(1000)); - break; + if (musb->quirk_retries && !musb->flush_irq_work) { + musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n"); + schedule_delayed_work(&musb->irq_work, + msecs_to_jiffies(1000)); + musb->quirk_retries--; + break; + } + fallthrough; case MUSB_QUIRK_B_INVALID_VBUS_91: if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, -- 2.31.0

3 years, 9 months

1
0
0 0

patch "usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board." added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 5e3bbae8ee3d677a0aa2919dc62b5c60ea01ba61 Mon Sep 17 00:00:00 2001 From: Artur Petrosyan <Arthur.Petrosyan(a)synopsys.com> Date: Fri, 26 Mar 2021 14:24:46 +0400 Subject: usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. Increased the waiting timeout for HPRT0.PrtSusp register field to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't generated with the existing timeout. Cc: <stable(a)vger.kernel.org> # 4.18 Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan(a)synopsys.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index fc3269f5faf1..40e5655921bf 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5398,7 +5398,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) dwc2_writel(hsotg, hprt0, HPRT0); /* Wait for the HPRT0.PrtSusp register field to be set */ - if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) dev_warn(hsotg->dev, "Suspend wasn't generated\n"); /* -- 2.31.0

3 years, 9 months

1
0
0 0

patch "usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: xhci-mtk: fix broken streams issue on 0.96 xHCI to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 6f978a30c9bb12dab1302d0f06951ee290f5e600 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Tue, 23 Mar 2021 15:02:46 +0800 Subject: usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@me… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci-mtk.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index fe010cc61f19..2f27dc0d9c6b 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -397,6 +397,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -548,7 +555,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); -- 2.31.0

3 years, 9 months

1
0
0 0

patch "usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 5aef629704ad4d983ecf5c8a25840f16e45b6d59 Mon Sep 17 00:00:00 2001 From: Wesley Cheng <wcheng(a)codeaurora.org> Date: Wed, 24 Mar 2021 11:31:04 -0700 Subject: usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable Ensure that dep->flags are cleared until after stop active transfers is completed. Otherwise, the ENDXFER command will not be executed during ep disable. Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable <stable(a)vger.kernel.org> Reported-and-tested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Tested-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Wesley Cheng <wcheng(a)codeaurora.org> Link: https://lore.kernel.org/r/1616610664-16495-1-git-send-email-wcheng@codeauro… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/gadget.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4c15c3fce303..c7ef218e7a8c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -791,10 +791,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) reg &= ~DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - dep->stream_capable = false; - dep->type = 0; - dep->flags = 0; - /* Clear out the ep descriptors for non-ep0 */ if (dep->number > 1) { dep->endpoint.comp_desc = NULL; @@ -803,6 +799,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dwc3_remove_requests(dwc, dep); + dep->stream_capable = false; + dep->type = 0; + dep->flags = 0; + return 0; } -- 2.31.0

3 years, 9 months

1
0
0 0

[PATCH 3/3] usb: dwc2: Prevent core suspend when port connection flag is 0

by Artur Petrosyan

In host mode port connection status flag is "0" when loading the driver. After loading the driver system asserts suspend which is handled by "_dwc2_hcd_suspend()" function. Before the system suspend the port connection status is "0". As result need to check the "port_connect_status" if it is "0", then skipping entering to suspend. Cc: <stable(a)vger.kernel.org> # 5.2 Fixes: 6f6d70597c15 ("usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE") Signed-off-by: Artur Petrosyan <Arthur.Petrosyan(a)synopsys.com> --- drivers/usb/dwc2/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 40e5655921bf..1a9789ec5847 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4322,7 +4322,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) goto unlock; - if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL) + if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL || + hsotg->flags.b.port_connect_status == 0) goto skip_power_saving; /* -- 2.25.1

3 years, 9 months

2
1
0 0

[PATCH v5 0/1] s390/vfio-ap: fix circular lockdep when starting

by Tony Krowiak

*Commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") introduced a change that results in a circular lockdep when a Secure Execution guest that is configured with crypto devices is started. The problem resulted due to the fact that the patch moved the setting of the guest's AP masks within the protection of the matrix_dev->lock when the vfio_ap driver is notified that the KVM pointer has been set. Since it is not critical that setting/clearing of the guest's AP masks be done under the matrix_dev->lock when the driver is notified, the masks will not be updated under the matrix_dev->lock. The lock is necessary for the setting/unsetting of the KVM pointer, however, so that will remain in place. The dependency chain for the circular lockdep resolved by this patch is (in reverse order): 2: vfio_ap_mdev_group_notifier: kvm->lock matrix_dev->lock 1: handle_pqap: matrix_dev->lock kvm_vcpu_ioctl: vcpu->mutex 0: kvm_s390_cpus_to_pv: vcpu->mutex kvm_vm_ioctl: kvm->lock Please note: ----------- * If checkpatch is run against this patch series, you may get a "WARNING: Unknown commit id 'f21916ec4826', maybe rebased or not pulled?" message. The commit 'f21916ec4826', however, is definitely in the master branch on top of which this patch series was built, so I'm not sure why this message is being output by checkpatch. * All acks granted from previous review of this patch have been removed due to the fact that this patch introduces non-trivial changes (see change log below). Change log v4=> v5: ------------------ * In vfio_ap_mdev_ioctl() function: - Verify matrix_mdev is not NULL before doing reset - Do reset regardless matrix_mdev->kvm is NULL or not Change log v3=> v4: ------------------ * In vfio_ap_mdev_set_kvm() function, moved the setting of matrix_mdev->kvm_busy just prior to unlocking matrix_dev->lock. * Reset queues regardless of regardless of the value of matrix_mdev->kvm in response to the VFIO_DEVICE_RESET ioctl. Change log v2=> v3: ------------------ * Added two fields - 'bool kvm_busy' and 'wait_queue_head_t wait_for_kvm' to struct ap_matrix_mdev. The former indicates that the KVM pointer is in the process of being updated and the second allows a function that needs access to the KVM pointer to wait until it is no longer being updated. Resolves problem of synchronization between the functions that change the KVM pointer value and the functions that required access to it. Change log v1=> v2: ------------------ * No longer holding the matrix_dev->lock prior to setting/clearing the masks supplying the AP configuration to a KVM guest. * Make all updates to the data in the matrix mdev that is used to manage AP resources used by the KVM guest in the vfio_ap_mdev_set_kvm() function instead of the group notifier callback. * Check for the matrix mdev's KVM pointer in the vfio_ap_mdev_unset_kvm() function instead of the vfio_ap_mdev_release() function. Tony Krowiak (1): s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks drivers/s390/crypto/vfio_ap_ops.c | 309 ++++++++++++++++++-------- drivers/s390/crypto/vfio_ap_private.h | 2 + 2 files changed, 215 insertions(+), 96 deletions(-) -- 2.21.3

3 years, 9 months

2
3
0 0

patch "iio: hid-sensor-rotation: Fix quaternion data not correct" added to staging-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: hid-sensor-rotation: Fix quaternion data not correct to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From 6c3b615379d7cd90d2f70b3cf9860c5a4910546a Mon Sep 17 00:00:00 2001 From: Ye Xiang <xiang.ye(a)intel.com> Date: Sat, 30 Jan 2021 18:25:46 +0800 Subject: iio: hid-sensor-rotation: Fix quaternion data not correct Because the data of HID_USAGE_SENSOR_ORIENT_QUATERNION defined by ISH FW is s16, but quaternion data type is in_rot_quaternion_type(le:s16/32X4>>0), need to transform data type from s16 to s32 May require manual backporting. Fixes: fc18dddc0625 ("iio: hid-sensors: Added device rotation support") Signed-off-by: Ye Xiang <xiang.ye(a)intel.com> Link: https://lore.kernel.org/r/20210130102546.31397-1-xiang.ye@intel.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/orientation/hid-sensor-rotation.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index 18e4ef060096..c087d8f72a54 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -21,7 +21,7 @@ struct dev_rot_state { struct hid_sensor_common common_attributes; struct hid_sensor_hub_attribute_info quaternion; struct { - u32 sampled_vals[4] __aligned(16); + s32 sampled_vals[4] __aligned(16); u64 timestamp __aligned(8); } scan; int scale_pre_decml; @@ -170,8 +170,15 @@ static int dev_rot_capture_sample(struct hid_sensor_hub_device *hsdev, struct dev_rot_state *rot_state = iio_priv(indio_dev); if (usage_id == HID_USAGE_SENSOR_ORIENT_QUATERNION) { - memcpy(&rot_state->scan.sampled_vals, raw_data, - sizeof(rot_state->scan.sampled_vals)); + if (raw_len / 4 == sizeof(s16)) { + rot_state->scan.sampled_vals[0] = ((s16 *)raw_data)[0]; + rot_state->scan.sampled_vals[1] = ((s16 *)raw_data)[1]; + rot_state->scan.sampled_vals[2] = ((s16 *)raw_data)[2]; + rot_state->scan.sampled_vals[3] = ((s16 *)raw_data)[3]; + } else { + memcpy(&rot_state->scan.sampled_vals, raw_data, + sizeof(rot_state->scan.sampled_vals)); + } dev_dbg(&indio_dev->dev, "Recd Quat len:%zu::%zu\n", raw_len, sizeof(rot_state->scan.sampled_vals)); -- 2.31.0

3 years, 9 months

1
0
0 0

patch "iio:adc:stm32-adc: Add HAS_IOMEM dependency" added to staging-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio:adc:stm32-adc: Add HAS_IOMEM dependency to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From c03e2df6e1d51f4e1252318275007214a3bd8e85 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Date: Sun, 24 Jan 2021 19:10:22 +0000 Subject: iio:adc:stm32-adc: Add HAS_IOMEM dependency Seems that there are config combinations in which this driver gets enabled and hence selects the MFD, but with out HAS_IOMEM getting pulled in via some other route. MFD is entirely contained in an if HAS_IOMEM block, leading to the build issue in this bugzilla. https://bugzilla.kernel.org/show_bug.cgi?id=209889 Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index bf7d22fa4be2..6605c263949c 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -923,6 +923,7 @@ config STM32_ADC_CORE depends on ARCH_STM32 || COMPILE_TEST depends on OF depends on REGULATOR + depends on HAS_IOMEM select IIO_BUFFER select MFD_STM32_TIMERS select IIO_STM32_TIMER_TRIGGER -- 2.31.0

3 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2021