Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 8f9be00f0e3f - selftest/bpf: Add a test to check trampoline freeing logic.
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ✅ i2c: i2cdetect sanity
🚧 ✅ Firmware test suite
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
🚧 ⚡⚡⚡ Storage: lvm device-mapper test
🚧 ⚡⚡⚡ stress: stress-ng
ppc64le:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
🚧 ✅ Storage: lvm device-mapper test
Host 2:
✅ Boot test
✅ LTP
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ trace: ftrace/tracer
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
s390x:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ CIFS Connectathon
⚡⚡⚡ POSIX pjd-fstest suites
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ jvm - jcstress tests
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking cki netfilter test
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ audit: audit testsuite test
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
🚧 ⚡⚡⚡ stress: stress-ng
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ LTP
⚡⚡⚡ CIFS Connectathon
⚡⚡⚡ POSIX pjd-fstest suites
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ jvm - jcstress tests
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking cki netfilter test
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ audit: audit testsuite test
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage: swraid mdadm raid_module test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
🚧 ⚡⚡⚡ stress: stress-ng
x86_64:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ xfstests - nfsv4.2
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
🚧 ✅ CPU: Idle Test
🚧 ❌ xfstests - btrfs
🚧 ✅ xfstests - cifsv3.11
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage block - filesystem fio test
🚧 ✅ Storage block - queue scheduler test
🚧 ✅ Storage nvme - tcp
🚧 ✅ Storage: lvm device-mapper test
🚧 ✅ stress: stress-ng
Host 2:
✅ Boot test
✅ ACPI table test
✅ LTP
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ✅ i2c: i2cdetect sanity
🚧 ✅ Firmware test suite
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
From: Pavel Andrianov <andrianov(a)ispras.ru>
[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]
pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Pavel Andrianov <andrianov(a)ispras.ru>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 7ace07dad6a3..9986f88618bd 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1577,8 +1577,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
mdiobus_unregister(pep->smi_bus);
mdiobus_free(pep->smi_bus);
- unregister_netdev(dev);
cancel_work_sync(&pep->tx_timeout_task);
+ unregister_netdev(dev);
free_netdev(dev);
return 0;
}
--
2.30.1
From: Pavel Andrianov <andrianov(a)ispras.ru>
[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]
pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Pavel Andrianov <andrianov(a)ispras.ru>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 5d5000c8edf1..09cb0ac701e1 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1571,8 +1571,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
mdiobus_unregister(pep->smi_bus);
mdiobus_free(pep->smi_bus);
- unregister_netdev(dev);
cancel_work_sync(&pep->tx_timeout_task);
+ unregister_netdev(dev);
free_netdev(dev);
return 0;
}
--
2.30.1
From: Mans Rullgard <mans(a)mansr.com>
[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]
Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently. The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.
See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.
Signed-off-by: Mans Rullgard <mans(a)mansr.com>
Signed-off-by: Tony Lindgren <tony(a)atomide.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/arm/boot/dts/am33xx.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index e58fab8aec5d..8923273a2f73 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -38,6 +38,9 @@ aliases {
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
};
cpus {
--
2.30.1
From: Mans Rullgard <mans(a)mansr.com>
[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]
Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently. The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.
See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.
Signed-off-by: Mans Rullgard <mans(a)mansr.com>
Signed-off-by: Tony Lindgren <tony(a)atomide.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/arm/boot/dts/am33xx.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d3dd6a16e70a..e321acaf35d6 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -39,6 +39,9 @@ aliases {
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
};
cpus {
--
2.30.1
From: Mans Rullgard <mans(a)mansr.com>
[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]
Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently. The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.
See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.
Signed-off-by: Mans Rullgard <mans(a)mansr.com>
Signed-off-by: Tony Lindgren <tony(a)atomide.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
arch/arm/boot/dts/am33xx.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index fb6b8aa12cc5..77fa7c0f2104 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@ aliases {
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
};
cpus {
--
2.30.1
A test was added to the probe function to ensure the device was
actually connected and working before successfully completing a
probe. If the device was actually there, but the I2C bus was not
ready yet for whatever reason, the probe fails permanently.
Change the probe so that we defer the probe on a regmap read
failure so that we try the probe again when the dependent drivers
are potentially loaded. This should not affect the case where the
device truly isn't present because the probe will never successfully
complete.
Fixes: 2aa916e67db3 ("sc16is7xx: Read the LSR register for basic device presence check")
Cc: stable(a)vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z(a)nh6z.net>
---
drivers/tty/serial/sc16is7xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index f86ec2d2635b..9adb8362578c 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1196,7 +1196,7 @@ static int sc16is7xx_probe(struct device *dev,
ret = regmap_read(regmap,
SC16IS7XX_LSR_REG << SC16IS7XX_REG_SHIFT, &val);
if (ret < 0)
- return ret;
+ return -EPROBE_DEFER;
/* Alloc port structure */
s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL);
--
2.27.0