The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From e5113505904ea1c1c0e1f92c1cfa91fbf4da1694 Mon Sep 17 00:00:00 2001
From: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Date: Thu, 11 Mar 2021 16:25:46 +0900
Subject: [PATCH] block: Discard page cache of zone reset target range
When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.
This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Cc: <stable(a)vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn(a)wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.c…
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 8b9f3fc5a690..c0276b42d9fb 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -318,6 +318,22 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode,
return 0;
}
+static int blkdev_truncate_zone_range(struct block_device *bdev, fmode_t mode,
+ const struct blk_zone_range *zrange)
+{
+ loff_t start, end;
+
+ if (zrange->sector + zrange->nr_sectors <= zrange->sector ||
+ zrange->sector + zrange->nr_sectors > get_capacity(bdev->bd_disk))
+ /* Out of range */
+ return -EINVAL;
+
+ start = zrange->sector << SECTOR_SHIFT;
+ end = ((zrange->sector + zrange->nr_sectors) << SECTOR_SHIFT) - 1;
+
+ return truncate_bdev_range(bdev, mode, start, end);
+}
+
/*
* BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl processing.
* Called from blkdev_ioctl.
@@ -329,6 +345,7 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
struct request_queue *q;
struct blk_zone_range zrange;
enum req_opf op;
+ int ret;
if (!argp)
return -EINVAL;
@@ -352,6 +369,11 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case BLKRESETZONE:
op = REQ_OP_ZONE_RESET;
+
+ /* Invalidate the page cache, including dirty pages. */
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+ if (ret)
+ return ret;
break;
case BLKOPENZONE:
op = REQ_OP_ZONE_OPEN;
@@ -366,8 +388,20 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
return -ENOTTY;
}
- return blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
- GFP_KERNEL);
+ ret = blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
+ GFP_KERNEL);
+
+ /*
+ * Invalidate the page cache again for zone reset: writes can only be
+ * direct for zoned devices so concurrent writes would not add any page
+ * to the page cache after/during reset. The page cache may be filled
+ * again due to concurrent reads though and dropping the pages for
+ * these is fine.
+ */
+ if (!ret && cmd == BLKRESETZONE)
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+
+ return ret;
}
static inline unsigned long *blk_alloc_zone_bitmap(int node,
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From e5113505904ea1c1c0e1f92c1cfa91fbf4da1694 Mon Sep 17 00:00:00 2001
From: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Date: Thu, 11 Mar 2021 16:25:46 +0900
Subject: [PATCH] block: Discard page cache of zone reset target range
When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.
This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Cc: <stable(a)vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn(a)wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.c…
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 8b9f3fc5a690..c0276b42d9fb 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -318,6 +318,22 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode,
return 0;
}
+static int blkdev_truncate_zone_range(struct block_device *bdev, fmode_t mode,
+ const struct blk_zone_range *zrange)
+{
+ loff_t start, end;
+
+ if (zrange->sector + zrange->nr_sectors <= zrange->sector ||
+ zrange->sector + zrange->nr_sectors > get_capacity(bdev->bd_disk))
+ /* Out of range */
+ return -EINVAL;
+
+ start = zrange->sector << SECTOR_SHIFT;
+ end = ((zrange->sector + zrange->nr_sectors) << SECTOR_SHIFT) - 1;
+
+ return truncate_bdev_range(bdev, mode, start, end);
+}
+
/*
* BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl processing.
* Called from blkdev_ioctl.
@@ -329,6 +345,7 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
struct request_queue *q;
struct blk_zone_range zrange;
enum req_opf op;
+ int ret;
if (!argp)
return -EINVAL;
@@ -352,6 +369,11 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case BLKRESETZONE:
op = REQ_OP_ZONE_RESET;
+
+ /* Invalidate the page cache, including dirty pages. */
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+ if (ret)
+ return ret;
break;
case BLKOPENZONE:
op = REQ_OP_ZONE_OPEN;
@@ -366,8 +388,20 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
return -ENOTTY;
}
- return blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
- GFP_KERNEL);
+ ret = blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
+ GFP_KERNEL);
+
+ /*
+ * Invalidate the page cache again for zone reset: writes can only be
+ * direct for zoned devices so concurrent writes would not add any page
+ * to the page cache after/during reset. The page cache may be filled
+ * again due to concurrent reads though and dropping the pages for
+ * these is fine.
+ */
+ if (!ret && cmd == BLKRESETZONE)
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+
+ return ret;
}
static inline unsigned long *blk_alloc_zone_bitmap(int node,
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From e5113505904ea1c1c0e1f92c1cfa91fbf4da1694 Mon Sep 17 00:00:00 2001
From: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Date: Thu, 11 Mar 2021 16:25:46 +0900
Subject: [PATCH] block: Discard page cache of zone reset target range
When zone reset ioctl and data read race for a same zone on zoned block
devices, the data read leaves stale page cache even though the zone
reset ioctl zero clears all the zone data on the device. To avoid
non-zero data read from the stale page cache after zone reset, discard
page cache of reset target zones in blkdev_zone_mgmt_ioctl(). Introduce
the helper function blkdev_truncate_zone_range() to discard the page
cache. Ensure the page cache discarded by calling the helper function
before and after zone reset in same manner as fallocate does.
This patch can be applied back to the stable kernel version v5.10.y.
Rework is needed for older stable kernels.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki(a)wdc.com>
Fixes: 3ed05a987e0f ("blk-zoned: implement ioctls")
Cc: <stable(a)vger.kernel.org> # 5.10+
Reviewed-by: Christoph Hellwig <hch(a)lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn(a)wdc.com>
Link: https://lore.kernel.org/r/20210311072546.678999-1-shinichiro.kawasaki@wdc.c…
Signed-off-by: Jens Axboe <axboe(a)kernel.dk>
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 8b9f3fc5a690..c0276b42d9fb 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -318,6 +318,22 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode,
return 0;
}
+static int blkdev_truncate_zone_range(struct block_device *bdev, fmode_t mode,
+ const struct blk_zone_range *zrange)
+{
+ loff_t start, end;
+
+ if (zrange->sector + zrange->nr_sectors <= zrange->sector ||
+ zrange->sector + zrange->nr_sectors > get_capacity(bdev->bd_disk))
+ /* Out of range */
+ return -EINVAL;
+
+ start = zrange->sector << SECTOR_SHIFT;
+ end = ((zrange->sector + zrange->nr_sectors) << SECTOR_SHIFT) - 1;
+
+ return truncate_bdev_range(bdev, mode, start, end);
+}
+
/*
* BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl processing.
* Called from blkdev_ioctl.
@@ -329,6 +345,7 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
struct request_queue *q;
struct blk_zone_range zrange;
enum req_opf op;
+ int ret;
if (!argp)
return -EINVAL;
@@ -352,6 +369,11 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
switch (cmd) {
case BLKRESETZONE:
op = REQ_OP_ZONE_RESET;
+
+ /* Invalidate the page cache, including dirty pages. */
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+ if (ret)
+ return ret;
break;
case BLKOPENZONE:
op = REQ_OP_ZONE_OPEN;
@@ -366,8 +388,20 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
return -ENOTTY;
}
- return blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
- GFP_KERNEL);
+ ret = blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors,
+ GFP_KERNEL);
+
+ /*
+ * Invalidate the page cache again for zone reset: writes can only be
+ * direct for zoned devices so concurrent writes would not add any page
+ * to the page cache after/during reset. The page cache may be filled
+ * again due to concurrent reads though and dropping the pages for
+ * these is fine.
+ */
+ if (!ret && cmd == BLKRESETZONE)
+ ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
+
+ return ret;
}
static inline unsigned long *blk_alloc_zone_bitmap(int node,
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 98b94b6e38ca0c4eeb29949c656f6a315000c23e Mon Sep 17 00:00:00 2001
From: Frieder Schrempf <frieder.schrempf(a)kontron.de>
Date: Mon, 22 Feb 2021 12:52:20 +0100
Subject: [PATCH] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3
voltage setting
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.…
Signed-off-by: Mark Brown <broonie(a)kernel.org>
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 89b806be399f..2f7ee212cb8c 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+ ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+ BUCK123_PRESET_EN);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+ return ret;
+ }
+
/* Set reset behavior on assertion of WDOG_B signal */
ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index ccdb5320a240..71902f41c919 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -147,6 +147,9 @@ enum {
#define BUCK6_FPWM 0x04
#define BUCK6_ENMODE_MASK 0x03
+/* PCA9450_REG_BUCK123_PRESET_EN bit */
+#define BUCK123_PRESET_EN 0x80
+
/* PCA9450_BUCK1OUT_DVS0 bits */
#define BUCK1OUT_DVS0_MASK 0x7F
#define BUCK1OUT_DVS0_DEFAULT 0x14
The patch below does not apply to the 5.11-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 98b94b6e38ca0c4eeb29949c656f6a315000c23e Mon Sep 17 00:00:00 2001
From: Frieder Schrempf <frieder.schrempf(a)kontron.de>
Date: Mon, 22 Feb 2021 12:52:20 +0100
Subject: [PATCH] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3
voltage setting
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.…
Signed-off-by: Mark Brown <broonie(a)kernel.org>
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 89b806be399f..2f7ee212cb8c 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+ ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+ BUCK123_PRESET_EN);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+ return ret;
+ }
+
/* Set reset behavior on assertion of WDOG_B signal */
ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index ccdb5320a240..71902f41c919 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -147,6 +147,9 @@ enum {
#define BUCK6_FPWM 0x04
#define BUCK6_ENMODE_MASK 0x03
+/* PCA9450_REG_BUCK123_PRESET_EN bit */
+#define BUCK123_PRESET_EN 0x80
+
/* PCA9450_BUCK1OUT_DVS0 bits */
#define BUCK1OUT_DVS0_MASK 0x7F
#define BUCK1OUT_DVS0_DEFAULT 0x14