This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423.
Users are reporting regressions in regulatory domain detection and
channel availability.
The problem this was trying to resolve was fixed in firmware anyway:
QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042
https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc…
Link: https://bbs.archlinux.org/viewtopic.php?id=254535
Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html
Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html
Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain")
Cc: <stable(a)vger.kernel.org>
Cc: Wen Gong <wgong(a)codeaurora.org>
Signed-off-by: Brian Norris <briannorris(a)chromium.org>
---
drivers/net/wireless/ath/regd.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index bee9110b91f3..20f4f8ea9f89 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -666,14 +666,14 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
/*
* Some users have reported their EEPROM programmed with
- * 0x8000 or 0x0 set, this is not a supported regulatory
- * domain but since we have more than one user with it we
- * need a solution for them. We default to 0x64, which is
- * the default Atheros world regulatory domain.
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
*/
static void ath_regd_sanitize(struct ath_regulatory *reg)
{
- if (reg->current_rd != COUNTRY_ERD_FLAG && reg->current_rd != 0)
+ if (reg->current_rd != COUNTRY_ERD_FLAG)
return;
printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
reg->current_rd = 0x64;
--
2.27.0.rc0.183.gde8f92d652-goog
When booting with ACPI unavailable or disabled, get_smp_config() ends up
calling MP_processor_info() for each CPU found in the MPS
table. Previously, this resulted in boot_cpu_physical_apicid getting
unconditionally overwritten by the apicid of whatever processor had the
CPU_BOOTPROCESSOR flag. This occurred even if boot_cpu_physical_apicid
had already been more reliably determined in register_lapic_address() by
calling read_apic_id() from the actual boot processor.
Ordinariliy, this is not a problem because the boot processor really is
the one with the CPU_BOOTPROCESSOR flag. However, kexec is an exception
in which the kernel may be booted from any processor regardless of the
MPS table contents. In this case, boot_cpu_physical_apicid may not
indicate the actual boot processor.
This was particularly problematic when the second kernel was booted with
NR_CPUS fewer than the number of physical processors. It's the job of
generic_processor_info() to decide which CPUs to bring up in this case.
That obviously must include the real boot processor which it takes care
to save a slot for. It relies upon the contents of
boot_cpu_physical_apicid to do this, which if incorrect, may result in
the boot processor getting left out.
This condition can be discovered by smp_sanity_check() and rectified by
adding the boot processor to the phys_cpu_present_map with the warning
"weird, boot CPU (#%d) not listed by the BIOS". However, commit
3e730dad3b6da ("x86/apic: Unify interrupt mode setup for SMP-capable
system") caused setup_local_APIC() to be called before this could happen
resulting in a BUG_ON(!apic->apic_id_registered()):
[ 0.655452] ------------[ cut here ]------------
[ 0.660610] Kernel BUG at setup_local_APIC+0x74/0x280 [verbose debug info unavailable]
[ 0.669466] invalid opcode: 0000 [#1] SMP
[ 0.673948] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.109.Ar-16509018.eostrunkkernel419 #1
[ 0.683670] Hardware name: Quanta Quanta LY6 (1LY6UZZ0FBC), BIOS 1.0.6.0-e7d6a55 11/26/2015
[ 0.693007] RIP: 0010:setup_local_APIC+0x74/0x280
[ 0.698264] Code: 80 e4 fe bf f0 00 00 00 89 c6 48 8b 05 0f 1a 8e 00 ff 50 10 e8 12 53 fd ff 48 8b 05 00 1a 8e 00 ff 90 a0 00 00 00 85 c0 75 02 <0f> 0b 48 8b 05 ed 19 8e 00 41 be 00 02 00 00 ff 90 b0 00 00 00 48
[ 0.719251] RSP: 0000:ffffffff81a03e20 EFLAGS: 00010246
[ 0.725091] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
[ 0.733066] RDX: 0000000000000000 RSI: 000000000000000f RDI: 0000000000000020
[ 0.741041] RBP: ffffffff81a03e98 R08: 0000000000000002 R09: 0000000000000000
[ 0.749014] R10: ffffffff81a204e0 R11: ffffffff81b50ea7 R12: 0000000000000000
[ 0.756989] R13: ffffffff81aef920 R14: ffffffff81af60a0 R15: 0000000000000000
[ 0.764965] FS: 0000000000000000(0000) GS:ffff888036800000(0000) knlGS:0000000000000000
[ 0.774007] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.780427] CR2: ffff888035c01000 CR3: 0000000035a08000 CR4: 00000000000006b0
[ 0.788401] Call Trace:
[ 0.791137] ? amd_iommu_prepare+0x15/0x2a
[ 0.795717] apic_bsp_setup+0x55/0x75
[ 0.799808] apic_intr_mode_init+0x169/0x16e
[ 0.804579] x86_late_time_init+0x10/0x17
[ 0.809062] start_kernel+0x37e/0x3fe
[ 0.813154] x86_64_start_reservations+0x2a/0x2c
[ 0.818316] x86_64_start_kernel+0x72/0x75
[ 0.822886] secondary_startup_64+0xa4/0xb0
[ 0.827564] ---[ end trace 237b64da0fd9b22e ]---
This change avoids these issues by only setting boot_cpu_physical_apicid
from the MPS table if it is not already set, which can occur in the
construct_default_ISA_mptable() path. Otherwise,
boot_cpu_physical_apicid will already have been set in
register_lapic_address() and should therefore remain untouched.
Looking through all the places where boot_cpu_physical_apicid is
accessed, nearly all of them assume that boot_cpu_physical_apicid should
match read_apic_id() on the booting processor. The only place that might
intend to use the BSP apicid listed in the MPS table is amd_numa_init(),
which explicitly requires boot_cpu_physical_apicid to be the lowest
apicid of all processors. Ironically, due to the early exit short
circuit in early_get_smp_config(), it instead gets
boot_cpu_physical_apicid = read_apic_id() rather than the MPS table
BSP. The behaviour of amd_numa_init() is therefore unaffected by this
change.
Fixes: 3e730dad3b6da ("x86/apic: Unify interrupt mode setup for SMP-capable system")
Signed-off-by: Kevin Mitchell <kevmitch(a)arista.com>
Cc: <stable(a)vger.kernel.org>
---
arch/x86/kernel/mpparse.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index afac7ccce72f..6f22f09bfe11 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -64,7 +64,8 @@ static void __init MP_processor_info(struct mpc_cpu *m)
if (m->cpuflag & CPU_BOOTPROCESSOR) {
bootup_cpu = " (Bootup-CPU)";
- boot_cpu_physical_apicid = m->apicid;
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = m->apicid;
}
pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
--
2.26.2
From: Alex Leibovich <alexl(a)marvell.com>
Automatic Clock Gating is a feature used for the power
consumption optimisation. It turned out that
during early init phase it may prevent the stable voltage
switch to 1.8V - due to that on some platfroms an endless
printout in dmesg can be observed:
"mmc1: 1.8V regulator output did not became stable"
Fix the problem by disabling the ACG at very beginning
of the sdhci_init and let that be enabled later.
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Signed-off-by: Alex Leibovich <alexl(a)marvell.com>
Signed-off-by: Marcin Wojtas <mw(a)semihalf.com>
Cc: stable(a)vger.kernel.org
---
drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c67611fdaa8a..4b05f6fdefb4 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
/* Disable tuning request and auto-retuning again */
xenon_retune_setup(host);
- xenon_set_acg(host, true);
+ /*
+ * The ACG should be turned off at the early init time, in order
+ * to solve a possile issues with the 1.8V regulator stabilization.
+ * The feature is enabled in later stage.
+ */
+ xenon_set_acg(host, false);
xenon_set_sdclk_off_idle(host, sdhc_id, false);
--
2.29.0
The GIC driver uses a RMW sequence to update the affinity, and
relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences
to update it atomically.
But these sequences only expend into anything meaningful if
the BL_SWITCHER option is selected, which almost never happens.
It also turns out that using a RMW and locks is just as silly,
as the GIC distributor supports byte accesses for the GICD_TARGETRn
registers, which when used make the update atomic by definition.
Drop the terminally broken code and replace it by a byte write.
Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature")
Cc: stable(a)vger.kernel.org
Signed-off-by: Marc Zyngier <maz(a)kernel.org>
---
drivers/irqchip/irq-gic.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 00de05abd3c3..c17fabd6741e 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -329,10 +329,8 @@ static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
{
- void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
- u32 val, mask, bit;
- unsigned long flags;
+ void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + gic_irq(d);
+ unsigned int cpu;
if (!force)
cpu = cpumask_any_and(mask_val, cpu_online_mask);
@@ -342,13 +340,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
return -EINVAL;
- gic_lock_irqsave(flags);
- mask = 0xff << shift;
- bit = gic_cpu_map[cpu] << shift;
- val = readl_relaxed(reg) & ~mask;
- writel_relaxed(val | bit, reg);
- gic_unlock_irqrestore(flags);
-
+ writeb_relaxed(gic_cpu_map[cpu], reg);
irq_data_update_effective_affinity(d, cpumask_of(cpu));
return IRQ_SET_MASK_OK_DONE;
--
2.27.0
On Fri, 29 Jan 2021 17:12:08 +0100,
Michael Catanzaro wrote:
>
> On Fri, Jan 29, 2021 at 9:30 am, Michael Catanzaro
> <mcatanzaro(a)redhat.com> wrote:
> > OK, I found "ALSA: hda/via: Apply the workaround generically for
> > Clevo machines" which was just merged yesterday. So I will test
> > again to find out.
>
> Hi Takashi, hi Harsha,
>
> I can confirm that the problem is fixed by this commit:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?…
Thanks, good to hear.
Then I think we can drop the entry from power_save_denylist in
hda_intel.c. Could you try that it still works with the patch below?
thanks,
Takashi
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2217,8 +2217,6 @@ static const struct snd_pci_quirk power_save_denylist[] = {
/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
- SND_PCI_QUIRK(0x1558, 0x6504, "Clevo W65_67SB", 0),
- /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
SND_PCI_QUIRK(0x1028, 0x0497, "Dell Precision T3600", 0),
/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
/* Note the P55A-UD3 and Z87-D3HP share the subsys id for the HDA dev */
Hi
[This is an automated email]
This commit has been processed because it contains a -stable tag.
The stable tag indicates that it's relevant for the following trees: all
The bot has tested the following trees: v5.5.11, v5.4.27, v4.19.112, v4.14.174, v4.9.217, v4.4.217.
v5.5.11: Build OK!
v5.4.27: Build OK!
v4.19.112: Failed to apply! Possible dependencies:
03512ceb60ae ("ieee80211: remove redundant leading zeroes")
09b4a4faf9d0 ("mac80211: introduce capability flags for VHT EXT NSS support")
0eeb2b674f05 ("mac80211: add an option for station management TXQ")
1c9559734eca ("mac80211: remove unnecessary key condition")
57a3a454f303 ("iwlwifi: split HE capabilities between AP and STA")
62872a9b9a10 ("mac80211: Fix PTK rekey freezes and clear text leak")
77f7ffdc335d ("mac80211: minstrel_ht: add flag to indicate missing/inaccurate tx A-MPDU length")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
80aaa9c16415 ("mac80211: Add he_capa debugfs entry")
96fc6efb9ad9 ("mac80211: IEEE 802.11 Extended Key ID support")
add7453ad62f ("wireless: align to draft 11ax D3.0")
adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames")
caf56338c22f ("mac80211: indicate support for multiple BSSID")
daa5b83513a7 ("mac80211: update HE operation fields to D3.0")
v4.14.174: Failed to apply! Possible dependencies:
110b32f065f3 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers")
1c73acf58bd6 ("iwlwifi: acpi: move ACPI method definitions to acpi.h")
28e9c00fe1f0 ("iwlwifi: remove upper case letters in sku_capa_band_*_enable")
4ae80f6c8d86 ("iwlwifi: support api ver2 of NVM_GET_INFO resp")
4b82455ca51e ("iwlwifi: use flags to denote modifiers for the channel maps")
4c625c564ba2 ("iwlwifi: get rid of fw/nvm.c")
514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
57a3a454f303 ("iwlwifi: split HE capabilities between AP and STA")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
813df5cef3bb ("iwlwifi: acpi: add common code to read from ACPI")
8a6171a7b601 ("iwlwifi: fw: add FW APIs for HE")
9c4f7d512740 ("iwlwifi: move all NVM parsing code to the common files")
9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
e7a3b8d87910 ("iwlwifi: acpi: move ACPI-related definitions to acpi.h")
v4.9.217: Failed to apply! Possible dependencies:
01796ff2fa6e ("iwlwifi: mvm: always free inactive queue when moving ownership")
0aaece81114e ("iwlwifi: split firmware API from iwl-trans.h")
1ea423b0e047 ("iwlwifi: remove unnecessary dev_cmd_headroom parameter")
310181ec34e2 ("iwlwifi: move to TVQM mode")
5594d80e9bf4 ("iwlwifi: support two phys for a000 devices")
623e7766be90 ("iwlwifi: pcie: introduce split point to a000 devices")
65e254821cee ("iwlwifi: mvm: use firmware station PM notification for AP_LINK_PS")
6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management")
727c02dfb848 ("iwlwifi: pcie: cleanup rfkill checks")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
8236f7db2724 ("iwlwifi: mvm: assign cab queue to the correct station")
87d0e1af9db3 ("iwlwifi: mvm: separate queue mapping from queue enablement")
bb49701b41de ("iwlwifi: mvm: support a000 SCD queue configuration")
cf90da352a32 ("iwlwifi: mvm: use mvm_disable_queue instead of sharing logic")
d172a5eff629 ("iwlwifi: reorganize firmware API")
df88c08d5c7e ("iwlwifi: mvm: release static queues on bcast release")
eda50cde58de ("iwlwifi: pcie: add context information support")
v4.4.217: Failed to apply! Possible dependencies:
0aaece81114e ("iwlwifi: split firmware API from iwl-trans.h")
13555e8ba2f4 ("iwlwifi: mvm: add 9000-series RX API")
1a616dd2f171 ("iwlwifi: dump prph registers in a common place for all transports")
1e0bbebaae66 ("mac80211: enable starting BA session with custom timeout")
2f89a5d7d377 ("iwlwifi: mvm: move fw-dbg code to separate file")
39bdb17ebb5b ("iwlwifi: update host command messages to new format")
41837ca962ec ("iwlwifi: pcie: allow to pretend to have Tx CSUM for debug")
4707fde5cdef ("iwlwifi: mvm: use build-time assertion for fw trigger ID")
5b88792cd850 ("iwlwifi: move to wide ID for all commands")
6c4fbcbc1c95 ("iwlwifi: add support for 12K Receive Buffers")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
92fe83430b89 ("iwlwifi: uninline iwl_trans_send_cmd")
d172a5eff629 ("iwlwifi: reorganize firmware API")
dcbb4746286a ("iwlwifi: trans: support a callback for ASYNC commands")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks
Sasha
On Thu, 19 Nov 2020 at 01:36, Tao Zhou <t1zhou(a)163.com> wrote:
>
> On Thu, Nov 19, 2020 at 07:50:15AM +0800, Tao Zhou wrote:
> > On Wed, Nov 18, 2020 at 07:56:38PM -0300, Guilherme G. Piccoli wrote:
> > > Hi Vincent (and all CCed), I'm sorry to ping about such "old" patch, but
> > > we experienced a similar condition to what this patch addresses; it's an
> > > older kernel (4.15.x) but when suggesting the users to move to an
> > > updated 5.4.x kernel, we noticed that this patch is not there, although
> > > similar ones are (like [0] and [1]).
> > >
> > > So, I'd like to ask if there's any particular reason to not backport
> > > this fix to stable kernels, specially the longterm 5.4. The main reason
> > > behind the question is that the code is very complex for non-experienced
> > > scheduler developers, and I'm afraid in suggesting such backport to 5.4
> > > and introduce complex-to-debug issues.
> > >
> > > Let me know your thoughts Vincent (and all CCed), thanks in advance.
> > > Cheers,
> > >
> > >
> > > Guilherme
> > >
> > >
> > > P.S. For those that deleted this thread from the email client, here's a
> > > link:
> > > https://lore.kernel.org/lkml/20200513135528.4742-1-vincent.guittot@linaro.o…
> > >
> > >
> > > [0]
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?…
> > >
> > > [1]
> > > https://lore.kernel.org/lkml/20200506141821.GA9773@lorien.usersys.redhat.co…
> > > <- great thread BTW!
> >
> > 'sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list" failed to apply to
> > 5.4-stable tree'
> >
> > You could check above. But I do not have the link about this. Can't search it
> > on LKML web: https://lore.kernel.org/lkml/
> >
> > BTW: 'ouwen210(a)hotmail.com' and 'zohooouoto(a)zoho.com.cn' all is myself.
> >
> > Sorry for the confusing..
> >
> > Thanks.
>
> Sorry again. I forget something. It is in the stable.
>
> Here it is:
>
> https://lore.kernel.org/stable/159041776924279@kroah.com/
I think it has never been applied to stable.
As you mentioned, the backport has been sent :
https://lore.kernel.org/stable/20200525172709.GB7427@vingu-book/
I received another emailed in September and pointed out to the
backport : https://www.spinics.net/lists/stable/msg410445.html
>