From: Joerg Roedel <jroedel(a)suse.de>
Allow a runtime opt-out of kexec support for architecture code in case
the kernel is running in an environment where kexec is not properly
supported yet.
This will be used on x86 when the kernel is running as an SEV-ES
guest. SEV-ES guests need special handling for kexec to hand over all
CPUs to the new kernel. This requires special hypervisor support and
handling code in the guest which is not yet implemented.
Cc: stable(a)vger.kernel.org # v5.10+
Signed-off-by: Joerg Roedel <jroedel(a)suse.de>
---
include/linux/kexec.h | 1 +
kernel/kexec.c | 14 ++++++++++++++
kernel/kexec_file.c | 9 +++++++++
3 files changed, 24 insertions(+)
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 0c994ae37729..85c30dcd0bdc 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -201,6 +201,7 @@ int arch_kexec_kernel_verify_sig(struct kimage *image, void *buf,
unsigned long buf_len);
#endif
int arch_kexec_locate_mem_hole(struct kexec_buf *kbuf);
+bool arch_kexec_supported(void);
extern int kexec_add_buffer(struct kexec_buf *kbuf);
int kexec_locate_mem_hole(struct kexec_buf *kbuf);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index c82c6c06f051..d03134160458 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -195,11 +195,25 @@ static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
* that to happen you need to do that yourself.
*/
+bool __weak arch_kexec_supported(void)
+{
+ return true;
+}
+
static inline int kexec_load_check(unsigned long nr_segments,
unsigned long flags)
{
int result;
+ /*
+ * The architecture may support kexec in general, but the kernel could
+ * run in an environment where it is not (yet) possible to execute a new
+ * kernel. Allow the architecture code to opt-out of kexec support when
+ * it is running in such an environment.
+ */
+ if (!arch_kexec_supported())
+ return -ENOSYS;
+
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
return -EPERM;
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 33400ff051a8..96d08a512e9c 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -358,6 +358,15 @@ SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
int ret = 0, i;
struct kimage **dest_image, *image;
+ /*
+ * The architecture may support kexec in general, but the kernel could
+ * run in an environment where it is not (yet) possible to execute a new
+ * kernel. Allow the architecture code to opt-out of kexec support when
+ * it is running in such an environment.
+ */
+ if (!arch_kexec_supported())
+ return -ENOSYS;
+
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
return -EPERM;
--
2.31.1
From: Alex Leibovich <alexl(a)marvell.com>
Automatic Clock Gating is a feature used for the power
consumption optimisation. It turned out that
during early init phase it may prevent the stable voltage
switch to 1.8V - due to that on some platfroms an endless
printout in dmesg can be observed:
"mmc1: 1.8V regulator output did not became stable"
Fix the problem by disabling the ACG at very beginning
of the sdhci_init and let that be enabled later.
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Signed-off-by: Alex Leibovich <alexl(a)marvell.com>
Signed-off-by: Marcin Wojtas <mw(a)semihalf.com>
Cc: stable(a)vger.kernel.org
---
drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c67611fdaa8a..4b05f6fdefb4 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
/* Disable tuning request and auto-retuning again */
xenon_retune_setup(host);
- xenon_set_acg(host, true);
+ /*
+ * The ACG should be turned off at the early init time, in order
+ * to solve a possile issues with the 1.8V regulator stabilization.
+ * The feature is enabled in later stage.
+ */
+ xenon_set_acg(host, false);
xenon_set_sdclk_off_idle(host, sdhc_id, false);
--
2.29.0
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr ffff8881243384e0 by task mount/719
Call Trace:
dump_stack+0x115/0x16b
jffs2_clear_xattr_subsystem+0x95/0x6ac
jffs2_do_fill_super+0x84f/0xc30
jffs2_fill_super+0x2ea/0x4c0
mtd_get_sb+0x254/0x400
mtd_get_sb_by_nr+0x4f/0xd0
get_tree_mtd+0x498/0x840
jffs2_get_tree+0x25/0x30
vfs_get_tree+0x8d/0x2e0
path_mount+0x50f/0x1e50
do_mount+0x107/0x130
__se_sys_mount+0x1c5/0x2f0
__x64_sys_mount+0xc7/0x160
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 719:
kasan_save_stack+0x23/0x60
__kasan_kmalloc.constprop.0+0x10b/0x120
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x1c0/0x870
jffs2_alloc_xattr_ref+0x2f/0xa0
jffs2_scan_medium.cold+0x3713/0x4794
jffs2_do_mount_fs.cold+0xa7/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
Freed by task 719:
kmem_cache_free+0xcc/0x7b0
jffs2_free_xattr_ref+0x78/0x98
jffs2_clear_xattr_subsystem+0xa1/0x6ac
jffs2_do_mount_fs.cold+0x5e6/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
The buggy address belongs to the object at ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [ffff8881243384b8, ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Cc: stable(a)vger.kernel.org
Reported-by: Hulk Robot <hulkci(a)huawei.com>
Signed-off-by: Baokun Li <libaokun1(a)huawei.com>
---
fs/jffs2/fs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 2ac410477c4f..71f03a5d36ed 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -603,8 +603,8 @@ int jffs2_do_fill_super(struct super_block *sb, struct fs_context *fc)
jffs2_free_ino_caches(c);
jffs2_free_raw_node_refs(c);
kvfree(c->blocks);
- out_inohash:
jffs2_clear_xattr_subsystem(c);
+ out_inohash:
kfree(c->inocache_list);
out_wbuf:
jffs2_flash_cleanup(c);
--
2.31.1
The following commit has been merged into the irq/urgent branch of tip:
Commit-ID: 83dbf898a2d45289be875deb580e93050ba67529
Gitweb: https://git.kernel.org/tip/83dbf898a2d45289be875deb580e93050ba67529
Author: Stefan Roese <sr(a)denx.de>
AuthorDate: Tue, 14 Dec 2021 12:49:32 +01:00
Committer: Thomas Gleixner <tglx(a)linutronix.de>
CommitterDate: Tue, 14 Dec 2021 13:23:32 +01:00
PCI/MSI: Mask MSI-X vectors only on success
Masking all unused MSI-X entries is done to ensure that a crash kernel
starts from a clean slate, which correponds to the reset state of the
device as defined in the PCI-E specificion 3.0 and later:
Vector Control for MSI-X Table Entries
--------------------------------------
"00: Mask bit: When this bit is set, the function is prohibited from
sending a message using this MSI-X Table entry.
...
This bit’s state after reset is 1 (entry is masked)."
A Marvell NVME device fails to deliver MSI interrupts after trying to
enable MSI-X interrupts due to that masking. It seems to take the MSI-X
mask bits into account even when MSI-X is disabled.
While not specification compliant, this can be cured by moving the masking
into the success path, so that the MSI-X table entries stay in device reset
state when the MSI-X setup fails.
[ tglx: Move it into the success path, add comment and amend changelog ]
Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Stefan Roese <sr(a)denx.de>
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: linux-pci(a)vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas(a)google.com>
Cc: Michal Simek <michal.simek(a)xilinx.com>
Cc: Marek Vasut <marex(a)denx.de>
Cc: stable(a)vger.kernel.org
Link: https://lore.kernel.org/r/20211210161025.3287927-1-sr@denx.de
---
drivers/pci/msi.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 48e3f4e..6748cf9 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -722,9 +722,6 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
goto out_disable;
}
- /* Ensure that all table entries are masked. */
- msix_mask_all(base, tsize);
-
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
goto out_disable;
@@ -751,6 +748,16 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
dev->msix_enabled = 1;
+
+ /*
+ * Ensure that all table entries are masked to prevent
+ * stale entries from firing in a crash kernel.
+ *
+ * Done late to deal with a broken Marvell NVME device
+ * which takes the MSI-X mask bits into account even
+ * when MSI-X is disabled, which prevents MSI delivery.
+ */
+ msix_mask_all(base, tsize);
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
pcibios_free_irq(dev);
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 353050be4c19e102178ccc05988101887c25ae53 Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <daniel(a)iogearbox.net>
Date: Tue, 9 Nov 2021 18:48:08 +0000
Subject: [PATCH] bpf: Fix toctou on read-only map's constant scalar tracking
Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is
checking whether maps are read-only both from BPF program side and user space
side, and then, given their content is constant, reading out their data via
map->ops->map_direct_value_addr() which is then subsequently used as known
scalar value for the register, that is, it is marked as __mark_reg_known()
with the read value at verification time. Before a23740ec43ba, the register
content was marked as an unknown scalar so the verifier could not make any
assumptions about the map content.
The current implementation however is prone to a TOCTOU race, meaning, the
value read as known scalar for the register is not guaranteed to be exactly
the same at a later point when the program is executed, and as such, the
prior made assumptions of the verifier with regards to the program will be
invalid which can cause issues such as OOB access, etc.
While the BPF_F_RDONLY_PROG map flag is always fixed and required to be
specified at map creation time, the map->frozen property is initially set to
false for the map given the map value needs to be populated, e.g. for global
data sections. Once complete, the loader "freezes" the map from user space
such that no subsequent updates/deletes are possible anymore. For the rest
of the lifetime of the map, this freeze one-time trigger cannot be undone
anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_*
cmd calls which would update/delete map entries will be rejected with -EPERM
since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also
means that pending update/delete map entries must still complete before this
guarantee is given. This corner case is not an issue for loaders since they
create and prepare such program private map in successive steps.
However, a malicious user is able to trigger this TOCTOU race in two different
ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is
used to expand the competition interval, so that map_update_elem() can modify
the contents of the map after map_freeze() and bpf_prog_load() were executed.
This works, because userfaultfd halts the parallel thread which triggered a
map_update_elem() at the time where we copy key/value from the user buffer and
this already passed the FMODE_CAN_WRITE capability test given at that time the
map was not "frozen". Then, the main thread performs the map_freeze() and
bpf_prog_load(), and once that had completed successfully, the other thread
is woken up to complete the pending map_update_elem() which then changes the
map content. For ii) the idea of the batched update is similar, meaning, when
there are a large number of updates to be processed, it can increase the
competition interval between the two. It is therefore possible in practice to
modify the contents of the map after executing map_freeze() and bpf_prog_load().
One way to fix both i) and ii) at the same time is to expand the use of the
map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap()
support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf:
Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with
the rationale to make a writable mmap()'ing of a map mutually exclusive with
read-only freezing. The counter indicates writable mmap() mappings and then
prevents/fails the freeze operation. Its semantics can be expanded beyond
just mmap() by generally indicating ongoing write phases. This would essentially
span any parallel regular and batched flavor of update/delete operation and
then also have map_freeze() fail with -EBUSY. For the check_mem_access() in
the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all
last pending writes have completed via bpf_map_write_active() test. Once the
map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0
only then we are really guaranteed to use the map's data as known constants.
For map->frozen being set and pending writes in process of still being completed
we fall back to marking that register as unknown scalar so we don't end up
making assumptions about it. With this, both TOCTOU reproducers from i) and
ii) are fixed.
Note that the map->writecnt has been converted into a atomic64 in the fix in
order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating
map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning
the freeze_mutex over entire map update/delete operations in syscall side
would not be possible due to then causing everything to be serialized.
Similarly, something like synchronize_rcu() after setting map->frozen to wait
for update/deletes to complete is not possible either since it would also
have to span the user copy which can sleep. On the libbpf side, this won't
break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the
anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed
mmap()-ed memory where for .rodata it's non-writable.
Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars")
Reported-by: w1tcher.bupt(a)gmail.com
Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net>
Acked-by: Andrii Nakryiko <andrii(a)kernel.org>
Signed-off-by: Alexei Starovoitov <ast(a)kernel.org>
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index f715e8863f4d..e7a163a3146b 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -193,7 +193,7 @@ struct bpf_map {
atomic64_t usercnt;
struct work_struct work;
struct mutex freeze_mutex;
- u64 writecnt; /* writable mmap cnt; protected by freeze_mutex */
+ atomic64_t writecnt;
};
static inline bool map_value_has_spin_lock(const struct bpf_map *map)
@@ -1419,6 +1419,7 @@ void bpf_map_put(struct bpf_map *map);
void *bpf_map_area_alloc(u64 size, int numa_node);
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
void bpf_map_area_free(void *base);
+bool bpf_map_write_active(const struct bpf_map *map);
void bpf_map_init_from_attr(struct bpf_map *map, union bpf_attr *attr);
int generic_map_lookup_batch(struct bpf_map *map,
const union bpf_attr *attr,
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 50f96ea4452a..1033ee8c0caf 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -132,6 +132,21 @@ static struct bpf_map *find_and_alloc_map(union bpf_attr *attr)
return map;
}
+static void bpf_map_write_active_inc(struct bpf_map *map)
+{
+ atomic64_inc(&map->writecnt);
+}
+
+static void bpf_map_write_active_dec(struct bpf_map *map)
+{
+ atomic64_dec(&map->writecnt);
+}
+
+bool bpf_map_write_active(const struct bpf_map *map)
+{
+ return atomic64_read(&map->writecnt) != 0;
+}
+
static u32 bpf_map_value_size(const struct bpf_map *map)
{
if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
@@ -601,11 +616,8 @@ static void bpf_map_mmap_open(struct vm_area_struct *vma)
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt++;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_inc(map);
}
/* called for all unmapped memory region (including initial) */
@@ -613,11 +625,8 @@ static void bpf_map_mmap_close(struct vm_area_struct *vma)
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt--;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_dec(map);
}
static const struct vm_operations_struct bpf_map_default_vmops = {
@@ -668,7 +677,7 @@ static int bpf_map_mmap(struct file *filp, struct vm_area_struct *vma)
goto out;
if (vma->vm_flags & VM_MAYWRITE)
- map->writecnt++;
+ bpf_map_write_active_inc(map);
out:
mutex_unlock(&map->freeze_mutex);
return err;
@@ -1139,6 +1148,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1174,6 +1184,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
free_key:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1196,6 +1207,7 @@ static int map_delete_elem(union bpf_attr *attr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1226,6 +1238,7 @@ static int map_delete_elem(union bpf_attr *attr)
out:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1533,6 +1546,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ) ||
!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
@@ -1597,6 +1611,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
free_key:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1624,8 +1639,7 @@ static int map_freeze(const union bpf_attr *attr)
}
mutex_lock(&map->freeze_mutex);
-
- if (map->writecnt) {
+ if (bpf_map_write_active(map)) {
err = -EBUSY;
goto err_put;
}
@@ -4171,6 +4185,9 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
union bpf_attr __user *uattr,
int cmd)
{
+ bool has_read = cmd == BPF_MAP_LOOKUP_BATCH ||
+ cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH;
+ bool has_write = cmd != BPF_MAP_LOOKUP_BATCH;
struct bpf_map *map;
int err, ufd;
struct fd f;
@@ -4183,16 +4200,13 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
-
- if ((cmd == BPF_MAP_LOOKUP_BATCH ||
- cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH) &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
+ if (has_write)
+ bpf_map_write_active_inc(map);
+ if (has_read && !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
err = -EPERM;
goto err_put;
}
-
- if (cmd != BPF_MAP_LOOKUP_BATCH &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
+ if (has_write && !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
}
@@ -4205,8 +4219,9 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
BPF_DO_BATCH(map->ops->map_update_batch);
else
BPF_DO_BATCH(map->ops->map_delete_batch);
-
err_put:
+ if (has_write)
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 65d2f93b7030..50efda51515b 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4056,7 +4056,22 @@ static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
static bool bpf_map_is_rdonly(const struct bpf_map *map)
{
- return (map->map_flags & BPF_F_RDONLY_PROG) && map->frozen;
+ /* A map is considered read-only if the following condition are true:
+ *
+ * 1) BPF program side cannot change any of the map content. The
+ * BPF_F_RDONLY_PROG flag is throughout the lifetime of a map
+ * and was set at map creation time.
+ * 2) The map value(s) have been initialized from user space by a
+ * loader and then "frozen", such that no new map update/delete
+ * operations from syscall side are possible for the rest of
+ * the map's lifetime from that point onwards.
+ * 3) Any parallel/pending map update/delete operations from syscall
+ * side have been completed. Only after that point, it's safe to
+ * assume that map value(s) are immutable.
+ */
+ return (map->map_flags & BPF_F_RDONLY_PROG) &&
+ READ_ONCE(map->frozen) &&
+ !bpf_map_write_active(map);
}
static int bpf_map_direct_read(struct bpf_map *map, int off, int size, u64 *val)
Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
broke PCI support on XGene. The cause is the IB resources are now sorted
in address order instead of being in DT dma-ranges order. The result is
which inbound registers are used for each region are swapped. I don't
know the details about this h/w, but it appears that IB region 0
registers can't handle a size greater than 4GB. In any case, limiting
the size for region 0 is enough to get back to the original assignment
of dma-ranges to regions.
Reported-by: Stéphane Graber <stgraber(a)ubuntu.com>
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Link: https://lore.kernel.org/all/CA+enf=v9rY_xnZML01oEgKLmvY1NGBUUhnSJaETmXtDtXf…
Cc: stable(a)vger.kernel.org # v5.5+
Signed-off-by: Rob Herring <robh(a)kernel.org>
---
drivers/pci/controller/pci-xgene.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index 56d0d50338c8..d83dbd977418 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -465,7 +465,7 @@ static int xgene_pcie_select_ib_reg(u8 *ib_reg_mask, u64 size)
return 1;
}
- if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
+ if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
*ib_reg_mask |= (1 << 0);
return 0;
}
--
2.32.0
Allthough kernel text is always mapped with BATs, we still have
inittext mapped with pages, so TLB miss handling is required
when CONFIG_DEBUG_PAGEALLOC or CONFIG_KFENCE is set.
The final solution should be to set a BAT that also maps inittext
but that BAT then needs to be cleared at end of init, and it will
require more changes to be able to do it properly.
As DEBUG_PAGEALLOC or KFENCE are debugging, performance is not a big
deal so let's fix it simply for now to enable easy stable application.
Reported-by: Maxime Bizon <mbizon(a)freebox.fr>
Fixes: 035b19a15a98 ("powerpc/32s: Always map kernel text and rodata with BATs")
Cc: stable(a)vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy(a)csgroup.eu>
---
arch/powerpc/kernel/head_book3s_32.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 68e5c0a7e99d..2e2a8211b17b 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -421,14 +421,14 @@ InstructionTLBMiss:
*/
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
lis r1, TASK_SIZE@h /* check if kernel address */
cmplw 0,r1,r3
#endif
mfspr r2, SPRN_SDR1
li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER
rlwinm r2, r2, 28, 0xfffff000
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
bgt- 112f
lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
--
2.33.1