November 2021 - Linux-stable-mirror

[git:media_tree/master] media: redrat3: fix control-message timeouts

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: redrat3: fix control-message timeouts Author: Johan Hovold <johan(a)kernel.org> Date: Mon Oct 25 13:16:35 2021 +0100 USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable(a)vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/rc/redrat3.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) --- diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index ac85464864b9..cb22316b3f00 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -404,7 +404,7 @@ static int redrat3_send_cmd(int cmd, struct redrat3_dev *rr3) udev = rr3->udev; res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + 0x0000, 0x0000, data, sizeof(u8), 10000); if (res < 0) { dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", @@ -480,7 +480,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3) pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000); if (ret != len) dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); else { @@ -510,7 +510,7 @@ static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutus) ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout), - HZ * 25); + 25000); dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n", be32_to_cpu(*timeout), ret); @@ -542,32 +542,32 @@ static void redrat3_reset(struct redrat3_dev *rr3) *val = 0x01; rc = usb_control_msg(udev, rxpipe, RR3_RESET, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + RR3_CPUCS_REG_ADDR, 0, val, len, 25000); dev_dbg(dev, "reset returned 0x%02x\n", rc); *val = length_fuzz; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000); dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); *val = (65536 - (minimum_pause * 2000)) / 256; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25); + RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000); dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc); *val = periods_measure_carrier; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25); + RR3_IR_IO_PERIODS_MF, 0, val, len, 25000); dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val, rc); *val = RR3_DRIVER_MAXLENS; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000); dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); kfree(val); @@ -585,7 +585,7 @@ static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), RR3_FW_VERSION, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + 0, 0, buffer, RR3_FW_VERSION_LEN, 5000); if (rc >= 0) dev_info(rr3->dev, "Firmware rev: %s", buffer); @@ -825,14 +825,14 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); ret = usb_bulk_msg(rr3->udev, pipe, irdata, - sendbuf_len, &ret_len, 10 * HZ); + sendbuf_len, &ret_len, 10000); dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); /* now tell the hardware to transmit what we sent it */ pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, irdata, 2, HZ * 10); + 0, 0, irdata, 2, 10000); if (ret < 0) dev_err(dev, "Error: control msg send failed, rc %d\n", ret);

3 years, 1 month

1
0
0 0

[git:media_stage/master] media: redrat3: fix control-message timeouts

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: redrat3: fix control-message timeouts Author: Johan Hovold <johan(a)kernel.org> Date: Mon Oct 25 13:16:35 2021 +0100 USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable(a)vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/rc/redrat3.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) --- diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index ac85464864b9..cb22316b3f00 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -404,7 +404,7 @@ static int redrat3_send_cmd(int cmd, struct redrat3_dev *rr3) udev = rr3->udev; res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + 0x0000, 0x0000, data, sizeof(u8), 10000); if (res < 0) { dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", @@ -480,7 +480,7 @@ static u32 redrat3_get_timeout(struct redrat3_dev *rr3) pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000); if (ret != len) dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); else { @@ -510,7 +510,7 @@ static int redrat3_set_timeout(struct rc_dev *rc_dev, unsigned int timeoutus) ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout), - HZ * 25); + 25000); dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n", be32_to_cpu(*timeout), ret); @@ -542,32 +542,32 @@ static void redrat3_reset(struct redrat3_dev *rr3) *val = 0x01; rc = usb_control_msg(udev, rxpipe, RR3_RESET, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + RR3_CPUCS_REG_ADDR, 0, val, len, 25000); dev_dbg(dev, "reset returned 0x%02x\n", rc); *val = length_fuzz; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000); dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc); *val = (65536 - (minimum_pause * 2000)) / 256; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25); + RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000); dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc); *val = periods_measure_carrier; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25); + RR3_IR_IO_PERIODS_MF, 0, val, len, 25000); dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val, rc); *val = RR3_DRIVER_MAXLENS; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000); dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc); kfree(val); @@ -585,7 +585,7 @@ static void redrat3_get_firmware_rev(struct redrat3_dev *rr3) rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), RR3_FW_VERSION, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + 0, 0, buffer, RR3_FW_VERSION_LEN, 5000); if (rc >= 0) dev_info(rr3->dev, "Firmware rev: %s", buffer); @@ -825,14 +825,14 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf, pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); ret = usb_bulk_msg(rr3->udev, pipe, irdata, - sendbuf_len, &ret_len, 10 * HZ); + sendbuf_len, &ret_len, 10000); dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret); /* now tell the hardware to transmit what we sent it */ pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, irdata, 2, HZ * 10); + 0, 0, irdata, 2, 10000); if (ret < 0) dev_err(dev, "Error: control msg send failed, rc %d\n", ret);

3 years, 1 month

1
0
0 0

[git:media_tree/master] media: mceusb: fix control-message timeouts

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: mceusb: fix control-message timeouts Author: Johan Hovold <johan(a)kernel.org> Date: Mon Oct 25 13:16:34 2021 +0100 USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable(a)vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/rc/mceusb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index d09bee82c04c..2dc810f5a73f 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1430,7 +1430,7 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) */ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, - data, USB_CTRL_MSG_SZ, HZ * 3); + data, USB_CTRL_MSG_SZ, 3000); dev_dbg(dev, "set address - ret = %d", ret); dev_dbg(dev, "set address - data[0] = %d, data[1] = %d", data[0], data[1]); @@ -1438,20 +1438,20 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) /* set feature: bit rate 38400 bps */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, - 0xc04e, 0x0000, NULL, 0, HZ * 3); + 0xc04e, 0x0000, NULL, 0, 3000); dev_dbg(dev, "set feature - ret = %d", ret); /* bRequest 4: set char length to 8 bits */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 4, USB_TYPE_VENDOR, - 0x0808, 0x0000, NULL, 0, HZ * 3); + 0x0808, 0x0000, NULL, 0, 3000); dev_dbg(dev, "set char length - retB = %d", ret); /* bRequest 2: set handshaking to use DTR/DSR */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 2, USB_TYPE_VENDOR, - 0x0000, 0x0100, NULL, 0, HZ * 3); + 0x0000, 0x0100, NULL, 0, 3000); dev_dbg(dev, "set handshake - retC = %d", ret); /* device resume */

3 years, 1 month

1
0
0 0

[git:media_stage/master] media: mceusb: fix control-message timeouts

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: mceusb: fix control-message timeouts Author: Johan Hovold <johan(a)kernel.org> Date: Mon Oct 25 13:16:34 2021 +0100 USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable(a)vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org> drivers/media/rc/mceusb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index d09bee82c04c..2dc810f5a73f 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1430,7 +1430,7 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) */ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, - data, USB_CTRL_MSG_SZ, HZ * 3); + data, USB_CTRL_MSG_SZ, 3000); dev_dbg(dev, "set address - ret = %d", ret); dev_dbg(dev, "set address - data[0] = %d, data[1] = %d", data[0], data[1]); @@ -1438,20 +1438,20 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) /* set feature: bit rate 38400 bps */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, - 0xc04e, 0x0000, NULL, 0, HZ * 3); + 0xc04e, 0x0000, NULL, 0, 3000); dev_dbg(dev, "set feature - ret = %d", ret); /* bRequest 4: set char length to 8 bits */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 4, USB_TYPE_VENDOR, - 0x0808, 0x0000, NULL, 0, HZ * 3); + 0x0808, 0x0000, NULL, 0, 3000); dev_dbg(dev, "set char length - retB = %d", ret); /* bRequest 2: set handshaking to use DTR/DSR */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 2, USB_TYPE_VENDOR, - 0x0000, 0x0100, NULL, 0, HZ * 3); + 0x0000, 0x0100, NULL, 0, 3000); dev_dbg(dev, "set handshake - retC = %d", ret); /* device resume */

3 years, 1 month

1
0
0 0

[PATCH] scsi: qla2xxx: fix mailbox direction flags in qla2xxx_get_adapter_id()

by Ewan D. Milne

The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the data was not actually being read into the mcp->mb[] array from the adapter. Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation") Cc: stable(a)vger.kernel.org Signed-off-by: Ewan D. Milne <emilne(a)redhat.com> --- drivers/scsi/qla2xxx/qla_mbx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 7811c4952035..a6debeea3079 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1695,10 +1695,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10; if (IS_FWI2_CAPABLE(vha->hw)) mcp->in_mb |= MBX_19|MBX_18|MBX_17|MBX_16; - if (IS_QLA27XX(vha->hw) || IS_QLA28XX(vha->hw)) { - mcp->in_mb |= MBX_15; - mcp->out_mb |= MBX_7|MBX_21|MBX_22|MBX_23; - } + if (IS_QLA27XX(vha->hw) || IS_QLA28XX(vha->hw)) + mcp->in_mb |= MBX_15|MBX_21|MBX_22|MBX_23; mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; -- 2.31.1

3 years, 1 month

4
4
0 0

stable-rc/queue/4.14 baseline: 121 runs, 1 regressions (v4.14.255-198-g6c15f0937144)

by kernelci.org bot

stable-rc/queue/4.14 baseline: 121 runs, 1 regressions (v4.14.255-198-g6c15f0937144) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/queue%2F4.14/kernel/v4.14.25… Test: baseline Tree: stable-rc Branch: queue/4.14 Describe: v4.14.255-198-g6c15f0937144 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: 6c15f0937144cebd34374287939dc12854724ba3 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/6196d8234cc2adcba0e551dd Results: 4 PASS, 1 FAIL, 1 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/queue-4.14/v4.14.255-198-g6c15f0937… HTML log: https://storage.kernelci.org//stable-rc/queue-4.14/v4.14.255-198-g6c15f0937… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/6196d8234cc2adcba0e551e3 new failure (last pass: v4.14.255-198-g2f5db329fc88) 2 lines 2021-11-18T22:47:46.065162 [ 19.899810] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0> 2021-11-18T22:47:46.109375 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/102 2021-11-18T22:47:46.118237 kern :emerg : lock: emif_lock+0x0/0xffffed3c [emif], .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0

3 years, 1 month

1
0
0 0

stable-rc/queue/4.19 baseline: 131 runs, 1 regressions (v4.19.217-251-g52142ecdba80)

by kernelci.org bot

stable-rc/queue/4.19 baseline: 131 runs, 1 regressions (v4.19.217-251-g52142ecdba80) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/queue%2F4.19/kernel/v4.19.21… Test: baseline Tree: stable-rc Branch: queue/4.19 Describe: v4.19.217-251-g52142ecdba80 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: 52142ecdba8002e888412acb06148338155bf2e4 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/6196d1a6d41842ebe0e551ee Results: 5 PASS, 1 FAIL, 0 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.217-251-g52142ecdb… HTML log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.217-251-g52142ecdb… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/6196d1a6d41842ebe0e551f4 failing since 0 day (last pass: v4.19.217-251-gdb8a90cbc48f, first fail: v4.19.217-251-gd104c0a7fd2c) 2 lines 2021-11-18T22:20:10.135958 <8>[ 21.008117] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0> 2021-11-18T22:20:10.181556 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/107 2021-11-18T22:20:10.191171 kern :emerg : lock: emif_lock+0x0/0xffffecfc [emif], .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 2021-11-18T22:20:10.210572 <8>[ 21.083526] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=emerg RESULT=fail UNITS=lines MEASUREMENT=2>

3 years, 1 month

1
0
0 0

stable-rc/linux-4.19.y baseline: 194 runs, 1 regressions (v4.19.217)

by kernelci.org bot

stable-rc/linux-4.19.y baseline: 194 runs, 1 regressions (v4.19.217) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.21… Test: baseline Tree: stable-rc Branch: linux-4.19.y Describe: v4.19.217 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: fd8250304dd51bc2c8674af65c102dd8463ee88b Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/618fb259091576e1613358ec Results: 5 PASS, 1 FAIL, 0 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/linux-4.19.y/v4.19.217/arm/omap2plu… HTML log: https://storage.kernelci.org//stable-rc/linux-4.19.y/v4.19.217/arm/omap2plu… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/618fb259091576e1613358ef new failure (last pass: v4.19.216-17-gf1ca790424bd) 2 lines 2021-11-18T22:01:07.671403 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/110 2021-11-18T22:01:07.680842 kern :emerg : lock: emif_lock+0x0/0xffffecfc [emif], .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 2021-11-18T22:01:07.700174 <8>[ 21.523101] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=emerg RESULT=fail UNITS=lines MEASUREMENT=2>

3 years, 1 month

1
0
0 0

stable-rc/queue/4.9 baseline: 110 runs, 1 regressions (v4.9.290-159-gb051ad78f9ff7)

by kernelci.org bot

stable-rc/queue/4.9 baseline: 110 runs, 1 regressions (v4.9.290-159-gb051ad78f9ff7) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/queue%2F4.9/kernel/v4.9.290-… Test: baseline Tree: stable-rc Branch: queue/4.9 Describe: v4.9.290-159-gb051ad78f9ff7 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: b051ad78f9ff7de0379fe342f12e4bbcb41acbf0 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/6196cac5881ba7e750e551e1 Results: 4 PASS, 1 FAIL, 1 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/queue-4.9/v4.9.290-159-gb051ad78f9f… HTML log: https://storage.kernelci.org//stable-rc/queue-4.9/v4.9.290-159-gb051ad78f9f… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/6196cac5881ba7e750e551e7 failing since 0 day (last pass: v4.9.290-159-gbf72a0fffb43, first fail: v4.9.290-159-gacda9050a82b) 2 lines 2021-11-18T21:50:43.260707 [ 20.185028] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0> 2021-11-18T21:50:43.308977 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/127 2021-11-18T21:50:43.318051 kern :emerg : lock: emif_lock+0x0/0xfffff230 [emif], .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1

3 years, 1 month

1
0
0 0

stable-rc/linux-4.14.y baseline: 163 runs, 2 regressions (v4.14.255)

by kernelci.org bot

stable-rc/linux-4.14.y baseline: 163 runs, 2 regressions (v4.14.255) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------+------+---------------+----------+---------------------+------------ beagle-xm | arm | lab-baylibre | gcc-10 | omap2plus_defconfig | 1 panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.25… Test: baseline Tree: stable-rc Branch: linux-4.14.y Describe: v4.14.255 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: 5f9f3b0057d5c5782985784ba0159b05b4083055 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------+------+---------------+----------+---------------------+------------ beagle-xm | arm | lab-baylibre | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/618f9e169171338eb73358ec Results: 0 PASS, 1 FAIL, 0 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/linux-4.14.y/v4.14.255/arm/omap2plu… HTML log: https://storage.kernelci.org//stable-rc/linux-4.14.y/v4.14.255/arm/omap2plu… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.login: https://kernelci.org/test/case/id/618f9e169171338eb73358ed new failure (last pass: v4.14.255-200-g9ac4e6b250bf) platform | arch | lab | compiler | defconfig | regressions ----------+------+---------------+----------+---------------------+------------ panda | arm | lab-collabora | gcc-10 | omap2plus_defconfig | 1 Details: https://kernelci.org/test/plan/id/618f9e149171338eb73358dc Results: 4 PASS, 1 FAIL, 1 SKIP Full config: omap2plus_defconfig Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//stable-rc/linux-4.14.y/v4.14.255/arm/omap2plu… HTML log: https://storage.kernelci.org//stable-rc/linux-4.14.y/v4.14.255/arm/omap2plu… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.dmesg.emerg: https://kernelci.org/test/case/id/618f9e149171338eb73358e0 failing since 5 days (last pass: v4.14.255, first fail: v4.14.255-54-gb6f4d599e1d3) 2 lines 2021-11-18T21:29:25.070480 [ 20.070861] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0> 2021-11-18T21:29:25.112227 kern :emerg : BUG: spinlock bad magic on CPU#0, udevd/104 2021-11-18T21:29:25.121453 kern :emerg : lock: emif_lock+0x0/0xffffed3c [emif], .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0

3 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2021