October 2021 - Linux-stable-mirror

FAILED: patch "[PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 90b7c1c66132c20e8a550006011a3cbfb73dbfc1 Mon Sep 17 00:00:00 2001 From: Marijn Suijten <marijn.suijten(a)somainline.org> Date: Mon, 6 Sep 2021 22:25:51 +0200 Subject: [PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom… Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten(a)somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline… Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Rob Clark <robdclark(a)chromium.org> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index d13552b2213b..5b4e991f220d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, u32 nb_tries, u32 timeout_us) { - bool pll_locked = false; + bool pll_locked = false, pll_ready = false; void __iomem *base = pll_14nm->phy->pll_base; u32 tries, val; tries = nb_tries; while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val & BIT(5)); if (pll_locked) @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, udelay(timeout_us); } - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); + if (!pll_locked) + goto out; - if (pll_locked) - break; + tries = nb_tries; + while (tries--) { + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val & BIT(0)); - udelay(timeout_us); - } + if (pll_ready) + break; + + udelay(timeout_us); } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); +out: + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); - return pll_locked; + return pll_locked && pll_ready; } static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 90b7c1c66132c20e8a550006011a3cbfb73dbfc1 Mon Sep 17 00:00:00 2001 From: Marijn Suijten <marijn.suijten(a)somainline.org> Date: Mon, 6 Sep 2021 22:25:51 +0200 Subject: [PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom… Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten(a)somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline… Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Rob Clark <robdclark(a)chromium.org> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index d13552b2213b..5b4e991f220d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, u32 nb_tries, u32 timeout_us) { - bool pll_locked = false; + bool pll_locked = false, pll_ready = false; void __iomem *base = pll_14nm->phy->pll_base; u32 tries, val; tries = nb_tries; while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val & BIT(5)); if (pll_locked) @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, udelay(timeout_us); } - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); + if (!pll_locked) + goto out; - if (pll_locked) - break; + tries = nb_tries; + while (tries--) { + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val & BIT(0)); - udelay(timeout_us); - } + if (pll_ready) + break; + + udelay(timeout_us); } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); +out: + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); - return pll_locked; + return pll_locked && pll_ready; } static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 90b7c1c66132c20e8a550006011a3cbfb73dbfc1 Mon Sep 17 00:00:00 2001 From: Marijn Suijten <marijn.suijten(a)somainline.org> Date: Mon, 6 Sep 2021 22:25:51 +0200 Subject: [PATCH] drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom… Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten(a)somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline… Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Rob Clark <robdclark(a)chromium.org> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index d13552b2213b..5b4e991f220d 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX]; static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, u32 nb_tries, u32 timeout_us) { - bool pll_locked = false; + bool pll_locked = false, pll_ready = false; void __iomem *base = pll_14nm->phy->pll_base; u32 tries, val; tries = nb_tries; while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); pll_locked = !!(val & BIT(5)); if (pll_locked) @@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm, udelay(timeout_us); } - if (!pll_locked) { - tries = nb_tries; - while (tries--) { - val = dsi_phy_read(base + - REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); - pll_locked = !!(val & BIT(0)); + if (!pll_locked) + goto out; - if (pll_locked) - break; + tries = nb_tries; + while (tries--) { + val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS); + pll_ready = !!(val & BIT(0)); - udelay(timeout_us); - } + if (pll_ready) + break; + + udelay(timeout_us); } - DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); +out: + DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* "); - return pll_locked; + return pll_locked && pll_ready; } static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 75b3cb97eb1f05042745c0655a7145b0262d4c5c Mon Sep 17 00:00:00 2001 From: Kamal Dasu <kdasu(a)broadcom.com> Date: Fri, 8 Oct 2021 16:36:02 -0400 Subject: [PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by: Kamal Dasu <kdasu(a)broadcom.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index a78e56f566dd..3043677ba222 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi) static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) { + u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); if (has_bspi(qspi)) bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); + /* clear interrupt */ + bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1); } static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { @@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev, if (!qspi->dev_ids) return -ENOMEM; + /* + * Some SoCs integrate spi controller (e.g., its interrupt bits) + * in specific ways + */ + if (soc_intc) { + qspi->soc_intc = soc_intc; + soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); + } else { + qspi->soc_intc = NULL; + } + + if (qspi->clk) { + ret = clk_prepare_enable(qspi->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + goto qspi_probe_err; + } + qspi->base_clk = clk_get_rate(qspi->clk); + } else { + qspi->base_clk = MSPI_BASE_FREQ; + } + + if (data->has_mspi_rev) { + rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); + /* some older revs do not have a MSPI_REV register */ + if ((rev & 0xff) == 0xff) + rev = 0; + } + + qspi->mspi_maj_rev = (rev >> 4) & 0xf; + qspi->mspi_min_rev = rev & 0xf; + qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; + + qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); + + /* + * On SW resets it is possible to have the mask still enabled + * Need to disable the mask and clear the status while we init + */ + bcm_qspi_hw_uninit(qspi); + for (val = 0; val < num_irqs; val++) { irq = -1; name = qspi_irq_tab[val].irq_name; @@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev, goto qspi_probe_err; } - /* - * Some SoCs integrate spi controller (e.g., its interrupt bits) - * in specific ways - */ - if (soc_intc) { - qspi->soc_intc = soc_intc; - soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); - } else { - qspi->soc_intc = NULL; - } - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "failed to prepare clock\n"); - goto qspi_probe_err; - } - - qspi->base_clk = clk_get_rate(qspi->clk); - - if (data->has_mspi_rev) { - rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); - /* some older revs do not have a MSPI_REV register */ - if ((rev & 0xff) == 0xff) - rev = 0; - } - - qspi->mspi_maj_rev = (rev >> 4) & 0xf; - qspi->mspi_min_rev = rev & 0xf; - qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; - - qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); - bcm_qspi_hw_init(qspi); init_completion(&qspi->mspi_done); init_completion(&qspi->bspi_done);

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 75b3cb97eb1f05042745c0655a7145b0262d4c5c Mon Sep 17 00:00:00 2001 From: Kamal Dasu <kdasu(a)broadcom.com> Date: Fri, 8 Oct 2021 16:36:02 -0400 Subject: [PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by: Kamal Dasu <kdasu(a)broadcom.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index a78e56f566dd..3043677ba222 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi) static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) { + u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); if (has_bspi(qspi)) bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); + /* clear interrupt */ + bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1); } static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { @@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev, if (!qspi->dev_ids) return -ENOMEM; + /* + * Some SoCs integrate spi controller (e.g., its interrupt bits) + * in specific ways + */ + if (soc_intc) { + qspi->soc_intc = soc_intc; + soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); + } else { + qspi->soc_intc = NULL; + } + + if (qspi->clk) { + ret = clk_prepare_enable(qspi->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + goto qspi_probe_err; + } + qspi->base_clk = clk_get_rate(qspi->clk); + } else { + qspi->base_clk = MSPI_BASE_FREQ; + } + + if (data->has_mspi_rev) { + rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); + /* some older revs do not have a MSPI_REV register */ + if ((rev & 0xff) == 0xff) + rev = 0; + } + + qspi->mspi_maj_rev = (rev >> 4) & 0xf; + qspi->mspi_min_rev = rev & 0xf; + qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; + + qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); + + /* + * On SW resets it is possible to have the mask still enabled + * Need to disable the mask and clear the status while we init + */ + bcm_qspi_hw_uninit(qspi); + for (val = 0; val < num_irqs; val++) { irq = -1; name = qspi_irq_tab[val].irq_name; @@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev, goto qspi_probe_err; } - /* - * Some SoCs integrate spi controller (e.g., its interrupt bits) - * in specific ways - */ - if (soc_intc) { - qspi->soc_intc = soc_intc; - soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); - } else { - qspi->soc_intc = NULL; - } - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "failed to prepare clock\n"); - goto qspi_probe_err; - } - - qspi->base_clk = clk_get_rate(qspi->clk); - - if (data->has_mspi_rev) { - rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); - /* some older revs do not have a MSPI_REV register */ - if ((rev & 0xff) == 0xff) - rev = 0; - } - - qspi->mspi_maj_rev = (rev >> 4) & 0xf; - qspi->mspi_min_rev = rev & 0xf; - qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; - - qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); - bcm_qspi_hw_init(qspi); init_completion(&qspi->mspi_done); init_completion(&qspi->bspi_done);

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 75b3cb97eb1f05042745c0655a7145b0262d4c5c Mon Sep 17 00:00:00 2001 From: Kamal Dasu <kdasu(a)broadcom.com> Date: Fri, 8 Oct 2021 16:36:02 -0400 Subject: [PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by: Kamal Dasu <kdasu(a)broadcom.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index a78e56f566dd..3043677ba222 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi) static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) { + u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); if (has_bspi(qspi)) bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); + /* clear interrupt */ + bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1); } static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { @@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev, if (!qspi->dev_ids) return -ENOMEM; + /* + * Some SoCs integrate spi controller (e.g., its interrupt bits) + * in specific ways + */ + if (soc_intc) { + qspi->soc_intc = soc_intc; + soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); + } else { + qspi->soc_intc = NULL; + } + + if (qspi->clk) { + ret = clk_prepare_enable(qspi->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + goto qspi_probe_err; + } + qspi->base_clk = clk_get_rate(qspi->clk); + } else { + qspi->base_clk = MSPI_BASE_FREQ; + } + + if (data->has_mspi_rev) { + rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); + /* some older revs do not have a MSPI_REV register */ + if ((rev & 0xff) == 0xff) + rev = 0; + } + + qspi->mspi_maj_rev = (rev >> 4) & 0xf; + qspi->mspi_min_rev = rev & 0xf; + qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; + + qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); + + /* + * On SW resets it is possible to have the mask still enabled + * Need to disable the mask and clear the status while we init + */ + bcm_qspi_hw_uninit(qspi); + for (val = 0; val < num_irqs; val++) { irq = -1; name = qspi_irq_tab[val].irq_name; @@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev, goto qspi_probe_err; } - /* - * Some SoCs integrate spi controller (e.g., its interrupt bits) - * in specific ways - */ - if (soc_intc) { - qspi->soc_intc = soc_intc; - soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); - } else { - qspi->soc_intc = NULL; - } - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "failed to prepare clock\n"); - goto qspi_probe_err; - } - - qspi->base_clk = clk_get_rate(qspi->clk); - - if (data->has_mspi_rev) { - rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); - /* some older revs do not have a MSPI_REV register */ - if ((rev & 0xff) == 0xff) - rev = 0; - } - - qspi->mspi_maj_rev = (rev >> 4) & 0xf; - qspi->mspi_min_rev = rev & 0xf; - qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; - - qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); - bcm_qspi_hw_init(qspi); init_completion(&qspi->mspi_done); init_completion(&qspi->bspi_done);

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 75b3cb97eb1f05042745c0655a7145b0262d4c5c Mon Sep 17 00:00:00 2001 From: Kamal Dasu <kdasu(a)broadcom.com> Date: Fri, 8 Oct 2021 16:36:02 -0400 Subject: [PATCH] spi: bcm-qspi: clear MSPI spifie interrupt during probe Intermittent Kernel crash has been observed on probe in bcm_qspi_mspi_l2_isr() handler when the MSPI spifie interrupt bit has not been cleared before registering for interrupts. Fix the driver to move SoC specific custom interrupt handling code before we register IRQ in probe. Also clear MSPI interrupt status resgiter prior to registering IRQ handlers. Fixes: cc20a38612db ("spi: iproc-qspi: Add Broadcom iProc SoCs support") Signed-off-by: Kamal Dasu <kdasu(a)broadcom.com> Acked-by: Florian Fainelli <f.fainelli(a)gmail.com> Link: https://lore.kernel.org/r/20211008203603.40915-3-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index a78e56f566dd..3043677ba222 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi) static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) { + u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0); if (has_bspi(qspi)) bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); + /* clear interrupt */ + bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1); } static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { @@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev, if (!qspi->dev_ids) return -ENOMEM; + /* + * Some SoCs integrate spi controller (e.g., its interrupt bits) + * in specific ways + */ + if (soc_intc) { + qspi->soc_intc = soc_intc; + soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); + } else { + qspi->soc_intc = NULL; + } + + if (qspi->clk) { + ret = clk_prepare_enable(qspi->clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + goto qspi_probe_err; + } + qspi->base_clk = clk_get_rate(qspi->clk); + } else { + qspi->base_clk = MSPI_BASE_FREQ; + } + + if (data->has_mspi_rev) { + rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); + /* some older revs do not have a MSPI_REV register */ + if ((rev & 0xff) == 0xff) + rev = 0; + } + + qspi->mspi_maj_rev = (rev >> 4) & 0xf; + qspi->mspi_min_rev = rev & 0xf; + qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; + + qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); + + /* + * On SW resets it is possible to have the mask still enabled + * Need to disable the mask and clear the status while we init + */ + bcm_qspi_hw_uninit(qspi); + for (val = 0; val < num_irqs; val++) { irq = -1; name = qspi_irq_tab[val].irq_name; @@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev, goto qspi_probe_err; } - /* - * Some SoCs integrate spi controller (e.g., its interrupt bits) - * in specific ways - */ - if (soc_intc) { - qspi->soc_intc = soc_intc; - soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true); - } else { - qspi->soc_intc = NULL; - } - - ret = clk_prepare_enable(qspi->clk); - if (ret) { - dev_err(dev, "failed to prepare clock\n"); - goto qspi_probe_err; - } - - qspi->base_clk = clk_get_rate(qspi->clk); - - if (data->has_mspi_rev) { - rev = bcm_qspi_read(qspi, MSPI, MSPI_REV); - /* some older revs do not have a MSPI_REV register */ - if ((rev & 0xff) == 0xff) - rev = 0; - } - - qspi->mspi_maj_rev = (rev >> 4) & 0xf; - qspi->mspi_min_rev = rev & 0xf; - qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk; - - qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2); - bcm_qspi_hw_init(qspi); init_completion(&qspi->mspi_done); init_completion(&qspi->bspi_done);

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] net/mlx5e: Fix division by 0 in mlx5e_select_queue for" failed to apply to 5.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 84c8a87402cf073ba7948dd62d4815a3f4a224c8 Mon Sep 17 00:00:00 2001 From: Maxim Mikityanskiy <maximmi(a)nvidia.com> Date: Mon, 11 Oct 2021 18:39:35 +0300 Subject: [PATCH] net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by: Maxim Mikityanskiy <maximmi(a)nvidia.com> Reviewed-by: Tariq Toukan <tariqt(a)nvidia.com> Signed-off-by: Saeed Mahameed <saeedm(a)nvidia.com> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 0439203fc7d9..0684ac6699b2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -618,6 +618,11 @@ static void mlx5e_build_rep_params(struct net_device *netdev) params->mqprio.num_tc = 1; params->tunneled_offload_en = false; + /* Set an initial non-zero value, so that mlx5e_select_queue won't + * divide by zero if called before first activating channels. + */ + priv->num_tc_x_num_ch = params->num_channels * params->mqprio.num_tc; + mlx5_query_min_inline(mdev, &params->tx_min_inline_mode); }

3 years, 2 months

1
0
0 0

stable-rc/queue/4.19 baseline: 83 runs, 3 regressions (v4.19.211-23-g6a69a7fc4b12)

by kernelci.org bot

stable-rc/queue/4.19 baseline: 83 runs, 3 regressions (v4.19.211-23-g6a69a7fc4b12) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ---------------------+------+--------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1 qemu_arm-versatilepb | arm | lab-broonie | gcc-8 | versatile_defconfig | 1 qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/job/stable-rc/branch/queue%2F4.19/kernel/v4.19.21… Test: baseline Tree: stable-rc Branch: queue/4.19 Describe: v4.19.211-23-g6a69a7fc4b12 URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git SHA: 6a69a7fc4b120ed4a4660cb2450ced8fac856aa9 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ---------------------+------+--------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-baylibre | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/616d17605de24f263c3358e6 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… HTML log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.login: https://kernelci.org/test/case/id/616d17605de24f263c3358e7 failing since 338 days (last pass: v4.19.157-26-gd59f3161b3a0, first fail: v4.19.157-27-g5543cc2c41d55) platform | arch | lab | compiler | defconfig | regressions ---------------------+------+--------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-broonie | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/616d176478ad717d373358dd Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… HTML log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.login: https://kernelci.org/test/case/id/616d176478ad717d373358de failing since 338 days (last pass: v4.19.157-26-gd59f3161b3a0, first fail: v4.19.157-27-g5543cc2c41d55) platform | arch | lab | compiler | defconfig | regressions ---------------------+------+--------------+----------+---------------------+------------ qemu_arm-versatilepb | arm | lab-cip | gcc-8 | versatile_defconfig | 1 Details: https://kernelci.org/test/plan/id/616d175d7c7c6eacf333590e Results: 0 PASS, 1 FAIL, 0 SKIP Full config: versatile_defconfig Compiler: gcc-8 (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) Plain log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… HTML log: https://storage.kernelci.org//stable-rc/queue-4.19/v4.19.211-23-g6a69a7fc4b… Rootfs: http://storage.kernelci.org/images/rootfs/buildroot/kci-2020.05-6-g8983f3b7… * baseline.login: https://kernelci.org/test/case/id/616d175d7c7c6eacf333590f failing since 338 days (last pass: v4.19.157-26-gd59f3161b3a0, first fail: v4.19.157-27-g5543cc2c41d55)

3 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] net: dsa: fix spurious error message when unoffloaded port" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 43a4b4dbd48c9006ef64df3a12acf33bdfe11c61 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alvin=20=C5=A0ipraga?= <alsi(a)bang-olufsen.dk> Date: Tue, 12 Oct 2021 13:27:31 +0200 Subject: [PATCH] net: dsa: fix spurious error message when unoffloaded port leaves bridge MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Flip the sign of a return value check, thereby suppressing the following spurious error: port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP ... which is emitted when removing an unoffloaded DSA switch port from a bridge. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Alvin Šipraga <alsi(a)bang-olufsen.dk> Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Reviewed-by: Florian Fainelli <f.fainelli(a)gmail.com> Link: https://lore.kernel.org/r/20211012112730.3429157-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/switch.c b/net/dsa/switch.c index 1c797ec8e2c2..6466d0539af9 100644 --- a/net/dsa/switch.c +++ b/net/dsa/switch.c @@ -168,7 +168,7 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds, if (extack._msg) dev_err(ds->dev, "port %d: %s\n", info->port, extack._msg); - if (err && err != EOPNOTSUPP) + if (err && err != -EOPNOTSUPP) return err; }

3 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2021