This is an automatic generated email to let you know that the following patch were queued:
Subject: media: ite-cir: IR receiver stop working after receive overflow
Author: Sean Young <sean(a)mess.org>
Date: Sun Oct 17 13:01:15 2021 +0100
On an Intel NUC6iSYK, no IR is reported after a receive overflow.
When a receiver overflow occurs, this condition is only cleared by
reading the fifo. Make sure we read anything in the fifo.
Fixes: 28c7afb07ccf ("media: ite-cir: check for receive overflow")
Suggested-by: Bryan Pass <bryan.pass(a)gmail.com>
Tested-by: Bryan Pass <bryan.pass(a)gmail.com>
Cc: stable(a)vger.kernel.org>
Signed-off-by: Sean Young <sean(a)mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei(a)kernel.org>
drivers/media/rc/ite-cir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
---
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 5bc23e8c6d91..4f77d4ebacdc 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -242,7 +242,7 @@ static irqreturn_t ite_cir_isr(int irq, void *data)
}
/* check for the receive interrupt */
- if (iflags & ITE_IRQ_RX_FIFO) {
+ if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
/* read the FIFO bytes */
rx_bytes = dev->params->get_rx_bytes(dev, rx_buf,
ITE_RX_FIFO_LEN);
This is a note to let you know that I've just added the patch titled
usb-storage: Add compatibility quirk flags for iODD 2531/2541
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release
during the merge window.
If you have any questions about this process, please let me know.
>From 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 Mon Sep 17 00:00:00 2001
From: James Buren <braewoods+lkml(a)braewoods.net>
Date: Wed, 13 Oct 2021 20:55:04 -0500
Subject: usb-storage: Add compatibility quirk flags for iODD 2531/2541
These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.
Acked-by: Alan Stern <stern(a)rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml(a)braewoods.net>
Cc: stable <stable(a)vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods…
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/storage/unusual_devs.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c6b3fcf90180..29191d33c0e3 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -406,6 +406,16 @@ UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
"785EPX Storage",
USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
+/*
+ * Reported by James Buren <braewoods+lkml(a)braewoods.net>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV( 0x04c5, 0x2028, 0x0001, 0x0001,
+ "iODD",
+ "2531/2541",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
/*
* Not sure who reported this originally but
* Pavel Machek <pavel(a)ucw.cz> reported that the extra US_FL_SINGLE_LUN
--
2.33.1
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.
Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.
Cc: stable(a)vger.kernel.org
Signed-off-by: DENG Qingfang <dqfext(a)gmail.com>
---
drivers/net/dsa/mt7530.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a3b49abd32f1..dbd15da977b5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
{
struct mt7530_priv *priv = ds->priv;
- if (!dsa_is_user_port(ds, port))
- return 0;
-
mutex_lock(&priv->reg_mutex);
/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
- if (!dsa_is_user_port(ds, port))
- return;
-
mutex_lock(&priv->reg_mutex);
/* Clear up all port matrix which could be restored in the next
@@ -3265,7 +3259,7 @@ mt7530_probe(struct mdio_device *mdiodev)
return -ENOMEM;
priv->ds->dev = &mdiodev->dev;
- priv->ds->num_ports = DSA_MAX_PORTS;
+ priv->ds->num_ports = MT7530_NUM_PORTS;
/* Use medatek,mcm property to distinguish hardware type that would
* casues a little bit differences on power-on sequence.
--
2.25.1
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 8381887fc7c2 - x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Targeted tests: NO
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j24 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ Networking bridge: sanity - mlx5
⚡⚡⚡ Ethernet drivers sanity - mlx5
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Reboot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ IPMI driver test
✅ IPMItool loop stress test
✅ selinux-policy: serge-testsuite
✅ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
⚡⚡⚡ stress: stress-ng - interrupt
⚡⚡⚡ stress: stress-ng - cpu
⚡⚡⚡ stress: stress-ng - cpu-cache
⚡⚡⚡ stress: stress-ng - memory
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ stress: stress-ng - os
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Reboot test
✅ ACPI table test
✅ ACPI enabled test
✅ LTP - cve
✅ LTP - sched
⚡⚡⚡ LTP - syscalls
⚡⚡⚡ LTP - can
⚡⚡⚡ LTP - commands
⚡⚡⚡ LTP - containers
⚡⚡⚡ LTP - dio
⚡⚡⚡ LTP - fs
⚡⚡⚡ LTP - fsx
⚡⚡⚡ LTP - math
⚡⚡⚡ LTP - hugetlb
⚡⚡⚡ LTP - mm
⚡⚡⚡ LTP - nptl
⚡⚡⚡ LTP - pty
⚡⚡⚡ LTP - ipc
⚡⚡⚡ LTP - tracing
⚡⚡⚡ LTP: openposix test suite
⚡⚡⚡ CIFS Connectathon
⚡⚡⚡ POSIX pjd-fstest suites
⚡⚡⚡ NFS Connectathon
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ jvm - jcstress tests
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking cki netfilter test
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: dm/common
⚡⚡⚡ lvm snapper test
⚡⚡⚡ storage: SCSI VPD
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ xarray-idr-radixtree-test
🚧 ⚡⚡⚡ i2c: i2cdetect sanity
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Networking: igmp conformance test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ lvm cache test
Host 4:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - nvmeof-mp
Host 5:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - srp
Host 6:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ Networking bridge: sanity - mlx5
⚡⚡⚡ Ethernet drivers sanity - mlx5
Host 7:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ Networking bridge: sanity - mlx5
⚡⚡⚡ Ethernet drivers sanity - mlx5
ppc64le:
Host 1:
✅ Boot test
✅ Reboot test
🚧 ❌ Storage blktests - nvmeof-mp
Host 2:
✅ Boot test
✅ Reboot test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ LTP: openposix test suite
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: dm/common
✅ lvm snapper test
✅ trace: ftrace/tracer
🚧 ✅ xarray-idr-radixtree-test
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
🚧 ✅ lvm cache test
Host 3:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - srp
Host 4:
✅ Boot test
✅ Reboot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ IPMI driver test
✅ IPMItool loop stress test
✅ selinux-policy: serge-testsuite
✅ Storage blktests - blk
✅ Storage block - filesystem fio test
✅ Storage block - queue scheduler test
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
🚧 ✅ Podman system test - as root
🚧 ✅ Podman system test - as user
🚧 ❌ xfstests - btrfs
🚧 ✅ Storage blktests - nvme-tcp
🚧 ✅ Storage: lvm device-mapper test - upstream
s390x:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage: swraid mdadm raid_module test
⚡⚡⚡ stress: stress-ng - interrupt
⚡⚡⚡ stress: stress-ng - cpu
⚡⚡⚡ stress: stress-ng - cpu-cache
⚡⚡⚡ stress: stress-ng - memory
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ stress: stress-ng - os
Host 2:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - nvmeof-mp
Host 3:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - srp
Host 4:
✅ Boot test
✅ Reboot test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ LTP: openposix test suite
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ storage: dm/common
✅ lvm snapper test
✅ trace: ftrace/tracer
🚧 ❌ xarray-idr-radixtree-test
🚧 ✅ Memory function: kaslr
🚧 ✅ audit: audit testsuite test
🚧 ✅ lvm cache test
Host 5:
✅ Boot test
✅ Reboot test
✅ selinux-policy: serge-testsuite
✅ Storage blktests - blk
✅ Storage: swraid mdadm raid_module test
✅ stress: stress-ng - interrupt
✅ stress: stress-ng - cpu
✅ stress: stress-ng - cpu-cache
✅ stress: stress-ng - memory
🚧 ✅ Podman system test - as root
🚧 ✅ Podman system test - as user
🚧 ✅ Storage blktests - nvme-tcp
🚧 ✅ stress: stress-ng - os
x86_64:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ Reboot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ xfstests - nfsv4.2
⚡⚡⚡ xfstests - cifsv3.11
⚡⚡⚡ IPMI driver test
⚡⚡⚡ IPMItool loop stress test
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ power-management: cpupower/sanity test
⚡⚡⚡ Storage blktests - blk
⚡⚡⚡ Storage block - filesystem fio test
⚡⚡⚡ Storage block - queue scheduler test
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ Storage: swraid mdadm raid_module test
⚡⚡⚡ stress: stress-ng - interrupt
⚡⚡⚡ stress: stress-ng - cpu
⚡⚡⚡ stress: stress-ng - cpu-cache
⚡⚡⚡ stress: stress-ng - memory
🚧 ⚡⚡⚡ Podman system test - as root
🚧 ⚡⚡⚡ Podman system test - as user
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ Storage blktests - nvme-tcp
🚧 ⚡⚡⚡ Storage: lvm device-mapper test - upstream
🚧 ⚡⚡⚡ stress: stress-ng - os
Host 2:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - nvmeof-mp
Host 3:
✅ Boot test
✅ Reboot test
🚧 ✅ Storage blktests - srp
Host 4:
✅ Boot test
✅ Reboot test
✅ ACPI table test
✅ LTP - cve
✅ LTP - sched
✅ LTP - syscalls
✅ LTP - can
✅ LTP - commands
✅ LTP - containers
✅ LTP - dio
✅ LTP - fs
✅ LTP - fsx
✅ LTP - math
✅ LTP - hugetlb
✅ LTP - mm
✅ LTP - nptl
✅ LTP - pty
✅ LTP - ipc
✅ LTP - tracing
✅ LTP: openposix test suite
✅ CIFS Connectathon
✅ POSIX pjd-fstest suites
✅ NFS Connectathon
✅ Loopdev Sanity
✅ jvm - jcstress tests
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking cki netfilter test
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: dm/common
✅ lvm snapper test
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ❌ xarray-idr-radixtree-test
🚧 ✅ i2c: i2cdetect sanity
🚧 ✅ Firmware test suite
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking: igmp conformance test
🚧 ✅ audit: audit testsuite test
🚧 ✅ lvm cache test
Host 5:
✅ Boot test
✅ Reboot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ xfstests - nfsv4.2
✅ xfstests - cifsv3.11
✅ selinux-policy: serge-testsuite
✅ power-management: cpupower/sanity test
✅ Storage blktests - blk
✅ Storage block - filesystem fio test
✅ Storage block - queue scheduler test
✅ storage: software RAID testing
✅ Storage: swraid mdadm raid_module test
✅ stress: stress-ng - interrupt
✅ stress: stress-ng - cpu
✅ stress: stress-ng - cpu-cache
✅ stress: stress-ng - memory
🚧 ✅ Podman system test - as root
🚧 ✅ Podman system test - as user
🚧 ✅ CPU: Idle Test
🚧 ✅ xfstests - btrfs
🚧 ✅ Storage blktests - nvme-tcp
🚧 ✅ Storage: lvm device-mapper test - upstream
🚧 ✅ stress: stress-ng - os
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Targeted tests
--------------
Test runs for patches always include a set of base tests, plus some
tests chosen based on the file paths modified by the patch. The latter
are called "targeted tests". If no targeted tests are run, that means
no patch-specific tests are available. Please, consider contributing a
targeted test for related patches to increase test coverage. See
https://docs.engineering.redhat.com/x/_wEZB for more details.