September 2020 - Linux-stable-mirror

[PATCH] cxl: Rework error message for incompatible slots

by Frederic Barrat

Improve the error message shown if a capi adapter is plugged on a capi-incompatible slot directly under the PHB (no intermediate switch). Fixes: 5632874311db ("cxl: Add support for POWER9 DD2") Cc: stable(a)vger.kernel.org # 4.14+ Signed-off-by: Frederic Barrat <fbarrat(a)linux.ibm.com> --- drivers/misc/cxl/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index 25a9dd9c0c1b..2ba899f5659f 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -393,8 +393,8 @@ int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid, *capp_unit_id = get_capp_unit_id(np, *phb_index); of_node_put(np); if (!*capp_unit_id) { - pr_err("cxl: invalid capp unit id (phb_index: %d)\n", - *phb_index); + pr_err("cxl: No capp unit found for PHB[%lld,%d]. Make sure the adapter is on a capi-compatible slot\n", + *chipid, *phb_index); return -ENODEV; } -- 2.25.1

4 years, 3 months

3
3
0 0

✅ PASS: Test report for kernel 5.8.7-dca5fe8.cki (stable-queue)

by CKI Project

Hello, We ran automated tests on a recent commit from this kernel tree: Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Commit: dca5fe81c93b - net: usb: Fix uninit-was-stored issue in asix_read_phy_addr() The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK All kernel binaries, config files, and logs are available for download here: https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi… Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Compile testing --------------- We compiled the kernel for 4 architectures: aarch64: make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg ppc64le: make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg s390x: make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg x86_64: make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing ✅ stress: stress-ng 🚧 ✅ xfstests - btrfs 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ Storage blktests 🚧 ✅ Storage nvme - tcp Host 2: ✅ Boot test ✅ ACPI table test ✅ ACPI enabled test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer 🚧 ✅ kdump - kexec_boot ppc64le: Host 1: ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing 🚧 ✅ xfstests - btrfs 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ Storage blktests 🚧 ✅ Storage nvme - tcp Host 2: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. ⚡⚡⚡ Boot test 🚧 ⚡⚡⚡ kdump - sysrq-c Host 3: ✅ Boot test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer Host 4: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. ✅ Boot test 🚧 ⚡⚡⚡ kdump - sysrq-c s390x: Host 1: ✅ Boot test ✅ selinux-policy: serge-testsuite ✅ stress: stress-ng 🚧 ✅ Storage blktests 🚧 ❌ Storage nvme - tcp Host 2: ✅ Boot test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer x86_64: Host 1: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. ✅ Boot test ✅ xfstests - ext4 ✅ xfstests - xfs ✅ selinux-policy: serge-testsuite ✅ storage: software RAID testing ✅ stress: stress-ng 🚧 ❌ CPU: Frequency Driver Test 🚧 ✅ CPU: Idle Test 🚧 ✅ xfstests - btrfs 🚧 ⚡⚡⚡ IOMMU boot test 🚧 ⚡⚡⚡ IPMI driver test 🚧 ⚡⚡⚡ IPMItool loop stress test 🚧 ⚡⚡⚡ power-management: cpupower/sanity test 🚧 ⚡⚡⚡ Storage blktests 🚧 ⚡⚡⚡ Storage nvme - tcp Host 2: ⚡ Internal infrastructure issues prevented one or more tests (marked with ⚡⚡⚡) from running on this architecture. This is not the fault of the kernel that was tested. ✅ Boot test 🚧 ⚡⚡⚡ kdump - sysrq-c 🚧 ⚡⚡⚡ kdump - file-load Host 3: ✅ Boot test ✅ ACPI table test ✅ Podman system integration test - as root ✅ Podman system integration test - as user ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking socket: fuzz ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func - local ✅ Networking route_func - forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns - transport ✅ Networking ipsec: basic netns - tunnel ✅ Libkcapi AF_ALG test ✅ pciutils: sanity smoke test ✅ pciutils: update pci ids test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm - jcstress tests 🚧 ✅ Memory function: kaslr 🚧 ✅ Networking firewall: basic netfilter test 🚧 ✅ audit: audit testsuite test 🚧 ✅ trace: ftrace/tracer 🚧 ✅ kdump - kexec_boot Test sources: https://gitlab.com/cki-project/kernel-tests 💚 Pull requests are welcome for new tests or improvements to existing tests! Aborted tests ------------- Tests that didn't complete running successfully are marked with ⚡⚡⚡. If this was caused by an infrastructure issue, we try to mark that explicitly in the report. Waived tests ------------ If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed. Testing timeout --------------- We aim to provide a report within reasonable timeframe. Tests that haven't finished running yet are marked with ⏱.

4 years, 3 months

1
0
0 0

[PATCH] gpio: mockup: fix resource leak in error path

by Bartosz Golaszewski

From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> If the module init function fails after creating the debugs directory, it's never removed. Add proper cleanup calls to avoid this resource leak. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Cc: <stable(a)vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> --- drivers/gpio/gpio-mockup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index bc345185db26..1652897fdf90 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -552,6 +552,7 @@ static int __init gpio_mockup_init(void) err = platform_driver_register(&gpio_mockup_driver); if (err) { gpio_mockup_err("error registering platform driver\n"); + debugfs_remove_recursive(gpio_mockup_dbg_dir); return err; } @@ -582,6 +583,7 @@ static int __init gpio_mockup_init(void) gpio_mockup_err("error registering device"); platform_driver_unregister(&gpio_mockup_driver); gpio_mockup_unregister_pdevs(); + debugfs_remove_recursive(gpio_mockup_dbg_dir); return PTR_ERR(pdev); } -- 2.26.1

4 years, 3 months

2
2
0 0

[PATCH] ALSA: hda/realtek - The Mic on a RedmiBook doesn't work

by Hui Wang

The Mic connects to the Nid 0x19, but the configuration of Nid 0x19 is not defined to Mic, and also need to set the coeff to enable the auto detection on the Nid 0x19. After this change, the Mic plugging in or plugging out could be detected and could record the sound from the Mic. And the coeff value is suggested by Kailang of Realtek. Cc: Kailang Yang <kailang(a)realtek.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index abfc602c3b92..85e207173f5d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6228,6 +6228,7 @@ enum { ALC269_FIXUP_LEMOTE_A1802, ALC269_FIXUP_LEMOTE_A190X, ALC256_FIXUP_INTEL_NUC8_RUGGED, + ALC255_FIXUP_XIAOMI_HEADSET_MIC, }; static const struct hda_fixup alc269_fixups[] = { @@ -7591,6 +7592,16 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE }, + [ALC255_FIXUP_XIAOMI_HEADSET_MIC] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x45 }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x5089 }, + { } + }, + .chained = true, + .chain_id = ALC289_FIXUP_ASUS_GA401 + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7888,6 +7899,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI), SND_PCI_QUIRK(0x1b35, 0x1237, "CZC L101", ALC269_FIXUP_CZC_L101), SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */ + SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE), SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802), @@ -8065,6 +8077,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, + {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {} }; #define ALC225_STANDARD_PINS \ -- 2.25.1

4 years, 3 months

2
1
0 0

Re: Re: [PATCH 5.4 086/129] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

by Greg Kroah-Hartman

On Wed, Sep 09, 2020 at 04:21:01PM +0900, 김현순 wrote: > Dear Greg, > > > > I didn't intent to gain performance from this patch. Indeed i requested this > patch to resolve the bug we are experiencing. > > > > Different from kernel 4.19, napi gro made additional data structure called > rx_list, and for some reason, the list is always used after napi_gro_flush, > which is intended to be created to flush all gro (both merged and non-merged) > packets to network stack. Network packets received from network interface are > passed to rx_list once, and the rx_list is later flushed to network stack. > However, on the other hand, napi_gro_receive doesn't insert packet to rx_list. > Instead, it flushes to network stack directly. This causes out of order because > there might be some packets in rx_list (which has groups of packets that are > not flushed to network stack yet). If the packet from the same stream remains > in rx_list, and napi_gro_receive on next packet (from the same stream) is > called, this posterior packet will arrive to network stack first, which causes > out of order. > > > > And two patches mentioned by Edward are already in the branch. The patch i am > requesting is somewhat missing in android kernel, not sure the reason why. Ah, you are right, this is odd. Edward, those patches are already in the 5.4.y tree, which makes this patch not being present odd. I'll go add it back.... thanks, greg k-h

4 years, 3 months

1
0
0 0

[PATCH 1/3] KVM: SVM: Get rid of handle_fastpath_set_msr_irqoff()

by Wanpeng Li

From: Wanpeng Li <wanpengli(a)tencent.com> Analysis from Sean: | svm->next_rip is reset in svm_vcpu_run() only after calling | svm_exit_handlers_fastpath(), which will cause SVM's | skip_emulated_instruction() to write a stale RIP. Let's get rid of handle_fastpath_set_msr_irqoff() in svm_exit_handlers_fastpath() to have a quick fix. Reported-by: Paul K. <kronenpj(a)kronenpj.dyndns.org> Suggested-by: Sean Christopherson <sean.j.christopherson(a)intel.com> Cc: Paul K. <kronenpj(a)kronenpj.dyndns.org> Cc: <stable(a)vger.kernel.org> # v5.8-rc1+ Fixes: 404d5d7bff0d (KVM: X86: Introduce more exit_fastpath_completion enum values) Signed-off-by: Wanpeng Li <wanpengli(a)tencent.com> --- arch/x86/kvm/svm/svm.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 19e622a..c61bc3b 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -3349,11 +3349,6 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu) static fastpath_t svm_exit_handlers_fastpath(struct kvm_vcpu *vcpu) { - if (!is_guest_mode(vcpu) && - to_svm(vcpu)->vmcb->control.exit_code == SVM_EXIT_MSR && - to_svm(vcpu)->vmcb->control.exit_info_1) - return handle_fastpath_set_msr_irqoff(vcpu); - return EXIT_FASTPATH_NONE; } -- 2.7.4

4 years, 3 months

2
2
0 0

[PATCH] ARM: aspeed: g5: Do not set sirq polarity

by Joel Stanley

A feature was added to the aspeed vuart driver to configure the vuart interrupt (sirq) polarity according to the LPC/eSPI strapping register. Systems that depend on a active low behaviour (sirq_polarity set to 0) such as OpenPower boxes also use LPC, so this relationship does not hold. The property was added for a Tyan S7106 system which is not supported in the kernel tree. Should this or other systems wish to use this feature of the driver they should add it to the machine specific device tree. Fixes: c791fc76bc72 ("arm: dts: aspeed: Add vuart aspeed,sirq-polarity-sense...") Cc: stable(a)vger.kernel.org Signed-off-by: Joel Stanley <joel(a)jms.id.au> --- arch/arm/boot/dts/aspeed-g5.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 27e5c5cf7712..664630a0e084 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -410,7 +410,6 @@ vuart: serial@1e787000 { interrupts = <8>; clocks = <&syscon ASPEED_CLK_APB>; no-loopback-test; - aspeed,sirq-polarity-sense = <&syscon 0x70 25>; status = "disabled"; }; -- 2.28.0

4 years, 3 months

2
2
0 0

Re: [PATCH] Rescan the entire target on transport reset when LUN is 0

by Felipe Franciosi

> On Sep 8, 2020, at 3:22 PM, Paolo Bonzini <pbonzini(a)redhat.com> wrote: > > On 28/08/20 14:21, Matej Genci wrote: >> VirtIO 1.0 spec says >> The removed and rescan events ... when sent for LUN 0, they MAY >> apply to the entire target so the driver can ask the initiator >> to rescan the target to detect this. >> >> This change introduces the behaviour described above by scanning the >> entire scsi target when LUN is set to 0. This is both a functional and a >> performance fix. It aligns the driver with the spec and allows control >> planes to hotplug targets with large numbers of LUNs without having to >> request a RESCAN for each one of them. >> >> Signed-off-by: Matej Genci <matej(a)nutanix.com> >> Suggested-by: Felipe Franciosi <felipe(a)nutanix.com> >> --- >> drivers/scsi/virtio_scsi.c | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c >> index bfec84aacd90..a4b9bc7b4b4a 100644 >> --- a/drivers/scsi/virtio_scsi.c >> +++ b/drivers/scsi/virtio_scsi.c >> @@ -284,7 +284,12 @@ static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi, >> >> switch (virtio32_to_cpu(vscsi->vdev, event->reason)) { >> case VIRTIO_SCSI_EVT_RESET_RESCAN: >> - scsi_add_device(shost, 0, target, lun); >> + if (lun == 0) { >> + scsi_scan_target(&shost->shost_gendev, 0, target, >> + SCAN_WILD_CARD, SCSI_SCAN_INITIAL); >> + } else { >> + scsi_add_device(shost, 0, target, lun); >> + } >> break; >> case VIRTIO_SCSI_EVT_RESET_REMOVED: >> sdev = scsi_device_lookup(shost, 0, target, lun); >> > > > Acked-by: Paolo Bonzini <pbonzini(a)redhat.com> Cc: stable(a)vger.kernel.org Thanks, Paolo. I'm Cc'ing stable as I believe this fixes a driver bug where it doesn't follow the spec. Per commit message, today devices are required to issue RESCAN events for each LUN behind a target when hotplugging, or risking the driver not seeing the new LUNs. Is this enough? Or should we resend after merge per below? https://www.kernel.org/doc/Documentation/process/stable-kernel-rules.rst F.

4 years, 3 months

2
1
0 0

[PATCH 7/9] KVM: arm64: Do not try to map PUDs when they are folded into PMD

by Marc Zyngier

For the obscure cases where PMD and PUD are the same size (64kB pages with 42bit VA, for example, which results in only two levels of page tables), we can't map anything as a PUD, because there is... erm... no PUD to speak of. Everything is either a PMD or a PTE. So let's only try and map a PUD when its size is different from that of a PMD. Cc: stable(a)vger.kernel.org Fixes: b8e0ba7c8bea ("KVM: arm64: Add support for creating PUD hugepages at stage 2") Reported-by: Gavin Shan <gshan(a)redhat.com> Reported-by: Eric Auger <eric.auger(a)redhat.com> Reviewed-by: Alexandru Elisei <alexandru.elisei(a)arm.com> Reviewed-by: Gavin Shan <gshan(a)redhat.com> Tested-by: Gavin Shan <gshan(a)redhat.com> Tested-by: Eric Auger <eric.auger(a)redhat.com> Tested-by: Alexandru Elisei <alexandru.elisei(a)arm.com> Signed-off-by: Marc Zyngier <maz(a)kernel.org> --- arch/arm64/kvm/mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index 0121ef2c7c8d..16b8660ddbcc 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -1964,7 +1964,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, (fault_status == FSC_PERM && stage2_is_exec(mmu, fault_ipa, vma_pagesize)); - if (vma_pagesize == PUD_SIZE) { + /* + * If PUD_SIZE == PMD_SIZE, there is no real PUD level, and + * all we have is a 2-level page table. Trying to map a PUD in + * this case would be fatally wrong. + */ + if (PUD_SIZE != PMD_SIZE && vma_pagesize == PUD_SIZE) { pud_t new_pud = kvm_pfn_pud(pfn, mem_type); new_pud = kvm_pud_mkhuge(new_pud); -- 2.27.0

4 years, 3 months

2
1
0 0

[PATCH stable 4.19 v2 0/2] arm64: entry: Place an SB sequence following an ERET instruction

by Florian Fainelli

Changes in v2: - included missing preliminary patch to define the SB barrier instruction Will Deacon (2): arm64: Add support for SB barrier and patch in over DSB; ISB sequences arm64: entry: Place an SB sequence following an ERET instruction arch/arm64/include/asm/assembler.h | 13 +++++++++++++ arch/arm64/include/asm/barrier.h | 4 ++++ arch/arm64/include/asm/cpucaps.h | 3 ++- arch/arm64/include/asm/sysreg.h | 6 ++++++ arch/arm64/include/asm/uaccess.h | 3 +-- arch/arm64/include/uapi/asm/hwcap.h | 1 + arch/arm64/kernel/cpufeature.c | 12 ++++++++++++ arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/entry.S | 2 ++ arch/arm64/kvm/hyp/entry.S | 1 + arch/arm64/kvm/hyp/hyp-entry.S | 4 ++++ 11 files changed, 47 insertions(+), 3 deletions(-) -- 2.7.4

4 years, 3 months

1
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2020