Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers(a)arri.de>
Cc: stable(a)vger.kernel.org
---
drivers/i2c/busses/i2c-imx.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d8b2e632dd10..9d9b668ec7f2 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -479,6 +479,20 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
return -ETIMEDOUT;
}
+
+ /* check for arbitration lost */
+ if (i2c_imx->i2csr & I2SR_IAL) {
+ unsigned int temp = i2c_imx->i2csr;
+
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+ temp &= ~I2SR_IAL;
+ temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IAL);
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+
+ i2c_imx->i2csr = 0;
+ return -EAGAIN;
+ }
+
dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
i2c_imx->i2csr = 0;
return 0;
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
On Thu, Sep 17, 2020 at 10:05:37AM +0000, David Laight wrote:
> The 'red-zone' allows leaf function to use stack memory for locals
> that is below (ie the wrong side of) the stack pointer.
After looking at
"Figure 3.3: Stack Frame with Base Pointer"
in the x86-64 ABI doc, you're probably right:
0(%rbp)
-8(%rbp)
...
0(%rsp)
.. red zone
-128(%rsp)
i.e., rsp-relative addresses with negative offsets are in the red zone.
So it looks like the compiler actually knows very well what's going on
here and allocates room on the stack for that 0x8(%rsp) slot.
Good.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 409f6a37b44d - gcov: add support for GCC 10.1
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ❌ Storage blktests
🚧 ✅ Storage nvme - tcp
ppc64le:
Host 1:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 3:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ❌ Storage blktests
🚧 ✅ Storage nvme - tcp
Host 4:
✅ Boot test
🚧 ✅ kdump - sysrq-c
s390x:
Host 1:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ❌ Storage blktests
🚧 ❌ Storage nvme - tcp
x86_64:
Host 1:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 2:
✅ Boot test
✅ ACPI table test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ CPU: Frequency Driver Test
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.