From: Xie He <xie.he.0141(a)gmail.com>
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ]
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <khc(a)pm.waw.pl>
Cc: Martin Schiller <ms(a)dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141(a)gmail.com>
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/wan/hdlc_fr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 78596e42a3f3f..a09af49cd08b9 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1045,7 +1045,7 @@ static void pvc_setup(struct net_device *dev)
{
dev->type = ARPHRD_DLCI;
dev->flags = IFF_POINTOPOINT;
- dev->hard_header_len = 10;
+ dev->hard_header_len = 0;
dev->addr_len = 2;
netif_keep_dst(dev);
}
@@ -1097,6 +1097,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev->mtu = HDLC_MAX_MTU;
dev->min_mtu = 68;
dev->max_mtu = HDLC_MAX_MTU;
+ dev->needed_headroom = 10;
dev->priv_flags |= IFF_NO_QUEUE;
dev->ml_priv = pvc;
--
2.25.1
From: Xie He <xie.he.0141(a)gmail.com>
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ]
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <khc(a)pm.waw.pl>
Cc: Martin Schiller <ms(a)dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141(a)gmail.com>
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/wan/hdlc_fr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 038236a9c60ee..67f89917277ce 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1044,7 +1044,7 @@ static void pvc_setup(struct net_device *dev)
{
dev->type = ARPHRD_DLCI;
dev->flags = IFF_POINTOPOINT;
- dev->hard_header_len = 10;
+ dev->hard_header_len = 0;
dev->addr_len = 2;
netif_keep_dst(dev);
}
@@ -1096,6 +1096,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev->mtu = HDLC_MAX_MTU;
dev->min_mtu = 68;
dev->max_mtu = HDLC_MAX_MTU;
+ dev->needed_headroom = 10;
dev->priv_flags |= IFF_NO_QUEUE;
dev->ml_priv = pvc;
--
2.25.1
From: Guo Ren <guoren(a)linux.alibaba.com>
[ Upstream commit bc6717d55d07110d8f3c6d31ec2af50c11b07091 ]
When the timer counts to the upper limit, an overflow interrupt is
generated, and the count is reset with the value in the TIME_INI
register. But the software expects to start counting from 0 when
the count overflows, so it forces TIME_INI to 0 to solve the
potential interrupt storm problem.
Signed-off-by: Guo Ren <guoren(a)linux.alibaba.com>
Tested-by: Xu Kai <xukai(a)nationalchip.com>
Cc: Daniel Lezcano <daniel.lezcano(a)linaro.org>
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org>
Link: https://lore.kernel.org/r/1597735877-71115-1-git-send-email-guoren@kernel.o…
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/clocksource/timer-gx6605s.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c
index 80d0939d040b5..8d386adbe8009 100644
--- a/drivers/clocksource/timer-gx6605s.c
+++ b/drivers/clocksource/timer-gx6605s.c
@@ -28,6 +28,7 @@ static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
+ writel_relaxed(0, base + TIMER_INI);
ce->event_handler(ce);
--
2.25.1
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 05399b344982 - s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctl
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
ppc64le:
Host 1:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
🚧 ⚡⚡⚡ kdump - sysrq-c
Host 2:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
Host 3:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 4:
✅ Boot test
🚧 ✅ kdump - sysrq-c
s390x:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Storage blktests
🚧 ❌ Storage nvme - tcp
Host 2:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
x86_64:
Host 1:
✅ Boot test
✅ ACPI table test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ stress: stress-ng
🚧 ⚡⚡⚡ CPU: Frequency Driver Test
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 3:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ stress: stress-ng
🚧 ⚡⚡⚡ CPU: Frequency Driver Test
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 5:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ xfstests - ext4
⚡⚡⚡ xfstests - xfs
⚡⚡⚡ selinux-policy: serge-testsuite
⚡⚡⚡ storage: software RAID testing
⚡⚡⚡ stress: stress-ng
🚧 ⚡⚡⚡ CPU: Frequency Driver Test
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.