July 2020 - Linux-stable-mirror

[patch 1/5] mm/hugetlb.c: fix pages per hugetlb calculation

by Andrew Morton

From: Mike Kravetz <mike.kravetz(a)oracle.com> Subject: mm/hugetlb.c: fix pages per hugetlb calculation The routine hpage_nr_pages() was incorrectly used to calculate the number of base pages in a hugetlb page. hpage_nr_pages is designed to be called for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size. Due to the context in which hpage_nr_pages was called, it is unlikely to produce a user visible error. The routine with the incorrect call is only exercised in the case of hugetlb memory error or migration. In addition, this would need to be on an architecture which supports huge page sizes less than PMD_SIZE. And, the vma containing the huge page would also need to smaller than PMD_SIZE. Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Signed-off-by: Mike Kravetz <mike.kravetz(a)oracle.com> Reviewed-by: Matthew Wilcox (Oracle) <willy(a)infradead.org> Reported-by: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/mm/hugetlb.c~hugetlb-fix-pages-per-hugetlb-calculation +++ a/mm/hugetlb.c @@ -1593,7 +1593,7 @@ static struct address_space *_get_hugetl /* Use first found vma */ pgoff_start = page_to_pgoff(hpage); - pgoff_end = pgoff_start + hpage_nr_pages(hpage) - 1; + pgoff_end = pgoff_start + pages_per_huge_page(page_hstate(hpage)) - 1; anon_vma_interval_tree_foreach(avc, &anon_vma->rb_root, pgoff_start, pgoff_end) { struct vm_area_struct *vma = avc->vma; _

4 years, 5 months

1
0
0 0

+ mm-shmem-fix-freeing-new_attr-in-shmem_initxattrs.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm/shmem: fix freeing new_attr in shmem_initxattrs() has been added to the -mm tree. Its filename is mm-shmem-fix-freeing-new_attr-in-shmem_initxattrs.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-shmem-fix-freeing-new_attr-in-s… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-shmem-fix-freeing-new_attr-in-s… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Chengguang Xu <cgxu519(a)mykernel.net> Subject: mm/shmem: fix freeing new_attr in shmem_initxattrs() new_attr is allocated with kvmalloc() so should be freed with kvfree(). Link: http://lkml.kernel.org/r/20200703065636.20897-1-cgxu519@mykernel.net Signed-off-by: Chengguang Xu <cgxu519(a)mykernel.net> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/shmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/mm/shmem.c~mm-shmem-fix-freeing-new_attr-in-shmem_initxattrs +++ a/mm/shmem.c @@ -3178,7 +3178,7 @@ static int shmem_initxattrs(struct inode new_xattr->name = kmalloc(XATTR_SECURITY_PREFIX_LEN + len, GFP_KERNEL); if (!new_xattr->name) { - kfree(new_xattr); + kvfree(new_xattr); return -ENOMEM; } _ Patches currently in -mm which might be from cgxu519(a)mykernel.net are mm-shmem-fix-freeing-new_attr-in-shmem_initxattrs.patch

4 years, 5 months

1
0
0 0

[PATCH v4] ima: move APPRAISE_BOOTPARAM dependency on ARCH_POLICY to runtime

by Bruno Meneguele

APPRAISE_BOOTPARAM has been marked as dependent on !ARCH_POLICY in compile time, enforcing the appraisal whenever the kernel had the arch policy option enabled. However it breaks systems where the option is set but the system wasn't booted in a "secure boot" platform. In this scenario, anytime an appraisal policy (i.e. ima_policy=appraisal_tcb) is used it will be forced, giving no chance to the user set the 'fix' state (ima_appraise=fix) to actually measure system's files. Considering the ARCH_POLICY is only effective when secure boot is actually enabled this patch remove the compile time dependency and move it to a runtime decision, based on the secure boot state of that platform. Cc: stable(a)vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele <bmeneg(a)redhat.com> --- Changelog: v4: - instead of change arch_policy loading code, check secure boot state at "ima_appraise=" parameter handler (Mimi) v3: - extend secure boot arch checker to also consider trusted boot - enforce IMA appraisal when secure boot is effectively enabled (Nayna) - fix ima_appraise flag assignment by or'ing it (Mimi) v2: - pr_info() message prefix correction security/integrity/ima/Kconfig | 2 +- security/integrity/ima/ima_appraise.c | 18 ++++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index edde88dbe576..62dc11a5af01 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -232,7 +232,7 @@ config IMA_APPRAISE_REQUIRE_POLICY_SIGS config IMA_APPRAISE_BOOTPARAM bool "ima_appraise boot parameter" - depends on IMA_APPRAISE && !IMA_ARCH_POLICY + depends on IMA_APPRAISE default y help This option enables the different "ima_appraise=" modes diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c index a9649b04b9f1..4fc83b3fbd5c 100644 --- a/security/integrity/ima/ima_appraise.c +++ b/security/integrity/ima/ima_appraise.c @@ -18,14 +18,16 @@ static int __init default_appraise_setup(char *str) { -#ifdef CONFIG_IMA_APPRAISE_BOOTPARAM - if (strncmp(str, "off", 3) == 0) - ima_appraise = 0; - else if (strncmp(str, "log", 3) == 0) - ima_appraise = IMA_APPRAISE_LOG; - else if (strncmp(str, "fix", 3) == 0) - ima_appraise = IMA_APPRAISE_FIX; -#endif + if (IS_ENABLED(CONFIG_IMA_APPRAISE_BOOTPARAM) && + !arch_ima_get_secureboot()) { + if (strncmp(str, "off", 3) == 0) + ima_appraise = 0; + else if (strncmp(str, "log", 3) == 0) + ima_appraise = IMA_APPRAISE_LOG; + else if (strncmp(str, "fix", 3) == 0) + ima_appraise = IMA_APPRAISE_FIX; + } + return 1; } -- 2.26.2

4 years, 5 months

1
0
0 0

Re: [PATCH] crypto: af_alg - Fix regression on empty requests

by Naresh Kamboju

On Fri, 26 Jun 2020 at 12:00, Herbert Xu <herbert(a)gondor.apana.org.au> wrote: > > On Tue, Jun 23, 2020 at 10:02:17AM -0700, Eric Biggers wrote: > > > > The source code for the two failing AF_ALG tests is here: > > > > https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/cryp… > > https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/cryp… > > > > They use read() and write(), not send() and recv(). > > > > af_alg02 uses read() to read from a "salsa20" request socket without writing > > anything to it. It is expected that this returns 0, i.e. that behaves like > > encrypting an empty message. Since we are on this subject, LTP af_alg02 test case fails on stable 4.9 and stable 4.4 This is not a regression because the test case has been failing from the beginning. Is this test case expected to fail on stable 4.9 and 4.4 ? or any chance to fix this on these older branches ? Test output: af_alg02.c:52: BROK: Timed out while reading from request socket. ref: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.228-19… https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.228-19… - Naresh

4 years, 5 months

3
2
0 0

patch "serial: sh-sci: Initialize spinlock for uart console" added to tty-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Initialize spinlock for uart console to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f38278e9b810b06aff2981d505267be984423ba3 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Date: Wed, 1 Jul 2020 16:41:40 +0100 Subject: serial: sh-sci: Initialize spinlock for uart console serial core expects the spinlock to be initialized by the controller driver for serial console, this patch makes sure the spinlock is initialized, fixing the below issue: [ 0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 0.865945] lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112 [ 0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT) [ 0.865968] Call trace: [ 0.865979] dump_backtrace+0x0/0x1d8 [ 0.865985] show_stack+0x14/0x20 [ 0.865996] dump_stack+0xe8/0x130 [ 0.866006] spin_dump+0x6c/0x88 [ 0.866012] do_raw_spin_lock+0xb0/0xf8 [ 0.866023] _raw_spin_lock_irqsave+0x80/0xa0 [ 0.866032] uart_add_one_port+0x3a4/0x4e0 [ 0.866039] sci_probe+0x504/0x7c8 [ 0.866048] platform_drv_probe+0x50/0xa0 [ 0.866059] really_probe+0xdc/0x330 [ 0.866066] driver_probe_device+0x58/0xb8 [ 0.866072] device_driver_attach+0x6c/0x90 [ 0.866078] __driver_attach+0x88/0xd0 [ 0.866085] bus_for_each_dev+0x74/0xc8 [ 0.866091] driver_attach+0x20/0x28 [ 0.866098] bus_add_driver+0x14c/0x1f8 [ 0.866104] driver_register+0x60/0x110 [ 0.866109] __platform_driver_register+0x40/0x48 [ 0.866119] sci_init+0x2c/0x34 [ 0.866127] do_one_initcall+0x88/0x428 [ 0.866137] kernel_init_freeable+0x2c0/0x328 [ 0.866143] kernel_init+0x10/0x108 [ 0.866150] ret_from_fork+0x10/0x18 Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj(a)bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz(a)bp.renesas.com> Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/1593618100-2151-1-git-send-email-prabhakar.mahade… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sh-sci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e1179e74a2b8..204bb68ce3ca 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platform_device *dev, sciport->port.flags |= UPF_HARD_FLOW; } + if (sci_uart_driver.cons->index == sciport->port.line) + spin_lock_init(&sciport->port.lock); + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) { sci_cleanup_single(sciport); -- 2.27.0

4 years, 5 months

3
3
0 0

[PATCH 1/2] exfat: fix overflow issue in exfat_cluster_to_sector()

by Namjae Jeon

An overflow issue can occur while calculating sector in exfat_cluster_to_sector(). It needs to cast clus's type to sector_t before left shifting. Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers") Cc: stable(a)vger.kernel.org # v5.7 Reviewed-by: Sungjong Seo <sj1557.seo(a)samsung.com> Signed-off-by: Namjae Jeon <namjae.jeon(a)samsung.com> --- fs/exfat/exfat_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h index 3aed8e22087a..cb51d6e83199 100644 --- a/fs/exfat/exfat_fs.h +++ b/fs/exfat/exfat_fs.h @@ -368,7 +368,7 @@ static inline bool exfat_is_last_sector_in_cluster(struct exfat_sb_info *sbi, static inline sector_t exfat_cluster_to_sector(struct exfat_sb_info *sbi, unsigned int clus) { - return ((clus - EXFAT_RESERVED_CLUSTERS) << sbi->sect_per_clus_bits) + + return ((sector_t)(clus - EXFAT_RESERVED_CLUSTERS) << sbi->sect_per_clus_bits) + sbi->data_start_sector; } -- 2.17.1

4 years, 5 months

1
1
0 0

[PATCH] crypto: ccp - Fix use of merged scatterlists

by John Allen

Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver: alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ... alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ... alg: ahash: sha224-ccp test failed (wrong result) on test vector ... These errors are the result of improper processing of scatterlists mapped for DMA. Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry. The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation. In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation. Fixes: 63b945091a070 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: John Allen <john.allen(a)amd.com> Cc: stable(a)vger.kernel.org --- drivers/crypto/ccp/ccp-dev.h | 1 + drivers/crypto/ccp/ccp-ops.c | 37 +++++++++++++++++++++++++----------- 2 files changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/crypto/ccp/ccp-dev.h b/drivers/crypto/ccp/ccp-dev.h index 3f68262d9ab4..87a34d91fdf7 100644 --- a/drivers/crypto/ccp/ccp-dev.h +++ b/drivers/crypto/ccp/ccp-dev.h @@ -469,6 +469,7 @@ struct ccp_sg_workarea { unsigned int sg_used; struct scatterlist *dma_sg; + struct scatterlist *dma_sg_head; struct device *dma_dev; unsigned int dma_count; enum dma_data_direction dma_dir; diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index 422193690fd4..64112c736810 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -63,7 +63,7 @@ static u32 ccp_gen_jobid(struct ccp_device *ccp) static void ccp_sg_free(struct ccp_sg_workarea *wa) { if (wa->dma_count) - dma_unmap_sg(wa->dma_dev, wa->dma_sg, wa->nents, wa->dma_dir); + dma_unmap_sg(wa->dma_dev, wa->dma_sg_head, wa->nents, wa->dma_dir); wa->dma_count = 0; } @@ -92,6 +92,7 @@ static int ccp_init_sg_workarea(struct ccp_sg_workarea *wa, struct device *dev, return 0; wa->dma_sg = sg; + wa->dma_sg_head = sg; wa->dma_dev = dev; wa->dma_dir = dma_dir; wa->dma_count = dma_map_sg(dev, sg, wa->nents, dma_dir); @@ -104,14 +105,28 @@ static int ccp_init_sg_workarea(struct ccp_sg_workarea *wa, struct device *dev, static void ccp_update_sg_workarea(struct ccp_sg_workarea *wa, unsigned int len) { unsigned int nbytes = min_t(u64, len, wa->bytes_left); + unsigned int sg_combined_len = 0; if (!wa->sg) return; wa->sg_used += nbytes; wa->bytes_left -= nbytes; - if (wa->sg_used == wa->sg->length) { - wa->sg = sg_next(wa->sg); + if (wa->sg_used == sg_dma_len(wa->dma_sg)) { + /* Advance to the next DMA scatterlist entry */ + wa->dma_sg = sg_next(wa->dma_sg); + + /* In the case that the DMA mapped scatterlist has entries + * that have been merged, the non-DMA mapped scatterlist + * must be advanced multiple times for each merged entry. + * This ensures that the current non-DMA mapped entry + * corresponds to the current DMA mapped entry. + */ + do { + sg_combined_len += wa->sg->length; + wa->sg = sg_next(wa->sg); + } while (wa->sg_used > sg_combined_len); + wa->sg_used = 0; } } @@ -299,7 +314,7 @@ static unsigned int ccp_queue_buf(struct ccp_data *data, unsigned int from) /* Update the structures and generate the count */ buf_count = 0; while (sg_wa->bytes_left && (buf_count < dm_wa->length)) { - nbytes = min(sg_wa->sg->length - sg_wa->sg_used, + nbytes = min(sg_dma_len(sg_wa->dma_sg) - sg_wa->sg_used, dm_wa->length - buf_count); nbytes = min_t(u64, sg_wa->bytes_left, nbytes); @@ -331,11 +346,11 @@ static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, * and destination. The resulting len values will always be <= UINT_MAX * because the dma length is an unsigned int. */ - sg_src_len = sg_dma_len(src->sg_wa.sg) - src->sg_wa.sg_used; + sg_src_len = sg_dma_len(src->sg_wa.dma_sg) - src->sg_wa.sg_used; sg_src_len = min_t(u64, src->sg_wa.bytes_left, sg_src_len); if (dst) { - sg_dst_len = sg_dma_len(dst->sg_wa.sg) - dst->sg_wa.sg_used; + sg_dst_len = sg_dma_len(dst->sg_wa.dma_sg) - dst->sg_wa.sg_used; sg_dst_len = min_t(u64, src->sg_wa.bytes_left, sg_dst_len); op_len = min(sg_src_len, sg_dst_len); } else { @@ -365,7 +380,7 @@ static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, /* Enough data in the sg element, but we need to * adjust for any previously copied data */ - op->src.u.dma.address = sg_dma_address(src->sg_wa.sg); + op->src.u.dma.address = sg_dma_address(src->sg_wa.dma_sg); op->src.u.dma.offset = src->sg_wa.sg_used; op->src.u.dma.length = op_len & ~(block_size - 1); @@ -386,7 +401,7 @@ static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, /* Enough room in the sg element, but we need to * adjust for any previously used area */ - op->dst.u.dma.address = sg_dma_address(dst->sg_wa.sg); + op->dst.u.dma.address = sg_dma_address(dst->sg_wa.dma_sg); op->dst.u.dma.offset = dst->sg_wa.sg_used; op->dst.u.dma.length = op->src.u.dma.length; } @@ -2028,7 +2043,7 @@ ccp_run_passthru_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) dst.sg_wa.sg_used = 0; for (i = 1; i <= src.sg_wa.dma_count; i++) { if (!dst.sg_wa.sg || - (dst.sg_wa.sg->length < src.sg_wa.sg->length)) { + (sg_dma_len(dst.sg_wa.sg) < sg_dma_len(src.sg_wa.sg))) { ret = -EINVAL; goto e_dst; } @@ -2054,8 +2069,8 @@ ccp_run_passthru_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) goto e_dst; } - dst.sg_wa.sg_used += src.sg_wa.sg->length; - if (dst.sg_wa.sg_used == dst.sg_wa.sg->length) { + dst.sg_wa.sg_used += sg_dma_len(src.sg_wa.sg); + if (dst.sg_wa.sg_used == sg_dma_len(dst.sg_wa.sg)) { dst.sg_wa.sg = sg_next(dst.sg_wa.sg); dst.sg_wa.sg_used = 0; } -- 2.18.4

4 years, 5 months

4
4
0 0

FAILED: patch "[PATCH] EDAC/amd64: Read back the scrub rate PCI register on F15h" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Thu, 18 Jun 2020 20:25:25 +0200 Subject: [PATCH] EDAC/amd64: Read back the scrub rate PCI register on F15h Commit: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") added support for F15h, model 0x60 CPUs but in doing so, missed to read back SCRCTRL PCI config register on F15h CPUs which are *not* model 0x60. Add that read so that doing $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate can show the previously set DRAM scrub rate. Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") Reported-by: Anders Andersson <pipatron(a)gmail.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Cc: <stable(a)vger.kernel.org> #v4.4.. Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4… diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index ef90070a9194..6262f6370c5d 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -269,6 +269,8 @@ static int get_scrub_rate(struct mem_ctl_info *mci) if (pvt->model == 0x60) amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval); + else + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); } else { amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); }

4 years, 5 months

2
1
0 0

[PATCH 5/5] bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()

by Kees Cook

When evaluating access control over kallsyms visibility, credentials at open() time need to be used, not the "current" creds (though in BPF's case, this has likely always been the same). Plumb access to associated file->f_cred down through bpf_dump_raw_ok() and its callers now that kallsysm_show_value() has been refactored to take struct cred. Cc: stable(a)vger.kernel.org Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by: Kees Cook <keescook(a)chromium.org> --- include/linux/filter.h | 4 ++-- kernel/bpf/syscall.c | 37 +++++++++++++++++++++---------------- net/core/sysctl_net_core.c | 2 +- 3 files changed, 24 insertions(+), 19 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index 55104f6c78e8..0b0144752d78 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -884,12 +884,12 @@ void bpf_jit_compile(struct bpf_prog *prog); bool bpf_jit_needs_zext(void); bool bpf_helper_changes_pkt_data(void *func); -static inline bool bpf_dump_raw_ok(void) +static inline bool bpf_dump_raw_ok(const struct cred *cred) { /* Reconstruction of call-sites is dependent on kallsyms, * thus make dump the same restriction. */ - return kallsyms_show_value(current_cred()); + return kallsyms_show_value(cred); } struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 8da159936bab..859053ddf05b 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -3139,7 +3139,8 @@ static const struct bpf_map *bpf_map_from_imm(const struct bpf_prog *prog, return NULL; } -static struct bpf_insn *bpf_insn_prepare_dump(const struct bpf_prog *prog) +static struct bpf_insn *bpf_insn_prepare_dump(const struct bpf_prog *prog, + const struct cred *f_cred) { const struct bpf_map *map; struct bpf_insn *insns; @@ -3165,7 +3166,7 @@ static struct bpf_insn *bpf_insn_prepare_dump(const struct bpf_prog *prog) code == (BPF_JMP | BPF_CALL_ARGS)) { if (code == (BPF_JMP | BPF_CALL_ARGS)) insns[i].code = BPF_JMP | BPF_CALL; - if (!bpf_dump_raw_ok()) + if (!bpf_dump_raw_ok(f_cred)) insns[i].imm = 0; continue; } @@ -3221,7 +3222,8 @@ static int set_info_rec_size(struct bpf_prog_info *info) return 0; } -static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, +static int bpf_prog_get_info_by_fd(struct file *file, + struct bpf_prog *prog, const union bpf_attr *attr, union bpf_attr __user *uattr) { @@ -3290,11 +3292,11 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, struct bpf_insn *insns_sanitized; bool fault; - if (prog->blinded && !bpf_dump_raw_ok()) { + if (prog->blinded && !bpf_dump_raw_ok(file->f_cred)) { info.xlated_prog_insns = 0; goto done; } - insns_sanitized = bpf_insn_prepare_dump(prog); + insns_sanitized = bpf_insn_prepare_dump(prog, file->f_cred); if (!insns_sanitized) return -ENOMEM; uinsns = u64_to_user_ptr(info.xlated_prog_insns); @@ -3328,7 +3330,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, } if (info.jited_prog_len && ulen) { - if (bpf_dump_raw_ok()) { + if (bpf_dump_raw_ok(file->f_cred)) { uinsns = u64_to_user_ptr(info.jited_prog_insns); ulen = min_t(u32, info.jited_prog_len, ulen); @@ -3363,7 +3365,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, ulen = info.nr_jited_ksyms; info.nr_jited_ksyms = prog->aux->func_cnt ? : 1; if (ulen) { - if (bpf_dump_raw_ok()) { + if (bpf_dump_raw_ok(file->f_cred)) { unsigned long ksym_addr; u64 __user *user_ksyms; u32 i; @@ -3394,7 +3396,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, ulen = info.nr_jited_func_lens; info.nr_jited_func_lens = prog->aux->func_cnt ? : 1; if (ulen) { - if (bpf_dump_raw_ok()) { + if (bpf_dump_raw_ok(file->f_cred)) { u32 __user *user_lens; u32 func_len, i; @@ -3451,7 +3453,7 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, else info.nr_jited_line_info = 0; if (info.nr_jited_line_info && ulen) { - if (bpf_dump_raw_ok()) { + if (bpf_dump_raw_ok(file->f_cred)) { __u64 __user *user_linfo; u32 i; @@ -3497,7 +3499,8 @@ static int bpf_prog_get_info_by_fd(struct bpf_prog *prog, return 0; } -static int bpf_map_get_info_by_fd(struct bpf_map *map, +static int bpf_map_get_info_by_fd(struct file *file, + struct bpf_map *map, const union bpf_attr *attr, union bpf_attr __user *uattr) { @@ -3540,7 +3543,8 @@ static int bpf_map_get_info_by_fd(struct bpf_map *map, return 0; } -static int bpf_btf_get_info_by_fd(struct btf *btf, +static int bpf_btf_get_info_by_fd(struct file *file, + struct btf *btf, const union bpf_attr *attr, union bpf_attr __user *uattr) { @@ -3555,7 +3559,8 @@ static int bpf_btf_get_info_by_fd(struct btf *btf, return btf_get_info_by_fd(btf, attr, uattr); } -static int bpf_link_get_info_by_fd(struct bpf_link *link, +static int bpf_link_get_info_by_fd(struct file *file, + struct bpf_link *link, const union bpf_attr *attr, union bpf_attr __user *uattr) { @@ -3608,15 +3613,15 @@ static int bpf_obj_get_info_by_fd(const union bpf_attr *attr, return -EBADFD; if (f.file->f_op == &bpf_prog_fops) - err = bpf_prog_get_info_by_fd(f.file->private_data, attr, + err = bpf_prog_get_info_by_fd(f.file, f.file->private_data, attr, uattr); else if (f.file->f_op == &bpf_map_fops) - err = bpf_map_get_info_by_fd(f.file->private_data, attr, + err = bpf_map_get_info_by_fd(f.file, f.file->private_data, attr, uattr); else if (f.file->f_op == &btf_fops) - err = bpf_btf_get_info_by_fd(f.file->private_data, attr, uattr); + err = bpf_btf_get_info_by_fd(f.file, f.file->private_data, attr, uattr); else if (f.file->f_op == &bpf_link_fops) - err = bpf_link_get_info_by_fd(f.file->private_data, + err = bpf_link_get_info_by_fd(f.file, f.file->private_data, attr, uattr); else err = -EINVAL; diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index f93f8ace6c56..6ada114bbcca 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -274,7 +274,7 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write, ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (write && !ret) { if (jit_enable < 2 || - (jit_enable == 2 && bpf_dump_raw_ok())) { + (jit_enable == 2 && bpf_dump_raw_ok(current_cred()))) { *(int *)table->data = jit_enable; if (jit_enable == 2) pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n"); -- 2.25.1

4 years, 5 months

1
0
0 0

[PATCH v2 1/4] arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI

by Will Deacon

Our tracehook logic for syscall entry/exit raises a SIGTRAP back to the tracer following a ptrace request such as PTRACE_SYSCALL. As part of this procedure, we clobber the reported value of one of the tracee's general purpose registers (x7 for native tasks, r12 for compat) to indicate whether the stop occurred on syscall entry or exit. This is a slightly unfortunate ABI, as it prevents the tracer from accessing the real register value and is at odds with other similar stops such as seccomp traps. Since we're stuck with this ABI, expand the comment in our tracehook logic to acknowledge the issue and descibe the behaviour in more detail. Cc: <stable(a)vger.kernel.org> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Luis Machado <luis.machado(a)linaro.org> Reported-by: Keno Fischer <keno(a)juliacomputing.com> Signed-off-by: Will Deacon <will(a)kernel.org> --- arch/arm64/kernel/ptrace.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 68b7f34a08f5..d71795dc3dbd 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1811,8 +1811,20 @@ static void tracehook_report_syscall(struct pt_regs *regs, unsigned long saved_reg; /* - * A scratch register (ip(r12) on AArch32, x7 on AArch64) is - * used to denote syscall entry/exit: + * We have some ABI weirdness here in the way that we handle syscall + * exit stops because we indicate whether or not the stop has been + * signalled from syscall entry or syscall exit by clobbering a general + * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee + * and restoring its old value after the stop. This means that: + * + * - Any writes by the tracer to this register during the stop are + * ignored/discarded. + * + * - The actual value of the register is not available during the stop, + * so the tracer cannot save it and restore it later. + * + * - Syscall stops behave differently to seccomp and pseudo-step traps + * (the latter do not nobble any registers). */ regno = (is_compat_task() ? 12 : 7); saved_reg = regs->regs[regno]; -- 2.27.0.212.ge8ba1cc988-goog

4 years, 5 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2020