Fix a crash on DEC platforms starting with:
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing unused PROM memory: 124k freed
BUG: Bad page state in process swapper pfn:00001
page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1
Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124
80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30
00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348
2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000
80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000
...
Call Trace:
[<8004bc5c>] show_stack+0x34/0x104
[<8015675c>] bad_page+0xfc/0x128
[<80157714>] free_pcppages_bulk+0x1f4/0x5dc
[<801591cc>] free_unref_page+0xc0/0x130
[<8015cb04>] free_reserved_area+0x144/0x1d8
[<805abd78>] kernel_init+0x20/0x100
[<80046070>] ret_from_kernel_thread+0x14/0x1c
Disabling lock debugging due to kernel taint
caused by an attempt to free bootmem space that as from commit
b93ddc4f9156 ("mips: Reserve memory for the kernel image resources") has
not been anymore reserved due to the removal of generic MIPS arch code
that used to reserve all the memory from the beginning of RAM up to the
kernel load address.
This memory does need to be reserved on DEC platforms however as it is
used by REX firmware as working area, as per the TURBOchannel firmware
specification[1]:
Table 2-2 REX Memory Regions
-------------------------------------------------------------------------
Starting Ending
Region Address Address Use
-------------------------------------------------------------------------
0 0xa0000000 0xa000ffff Restart block, exception vectors,
REX stack and bss
1 0xa0010000 0xa0017fff Keyboard or tty drivers
2 0xa0018000 0xa001f3ff 1) CRT driver
3 0xa0020000 0xa002ffff boot, cnfg, init and t objects
4 0xa0020000 0xa002ffff 64KB scratch space
-------------------------------------------------------------------------
1) Note that the last 3 Kbytes of region 2 are reserved for backward
compatibility with previous system software.
-------------------------------------------------------------------------
(this table uses KSEG2 unmapped virtual addresses, which in the MIPS
architecture are offset from physical addresses by a fixed value of
0xa0000000 and therefore the regions referred do correspond to the
beginning of the physical address space) and we call into the firmware
on several occasions throughout the bootstrap process. It is believed
that pre-REX firmware used with non-TURBOchannel DEC platforms has the
same requirements, as hinted by note #1 cited.
Recreate the discarded reservation then, in DEC platform code, removing
the crash.
References:
[1] "TURBOchannel Firmware Specification", On-line version,
EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993,
Chapter 2 "System Module Firmware", p. 2-5
Signed-off-by: Maciej W. Rozycki <macro(a)linux-mips.org>
Fixes: b93ddc4f9156 ("mips: Reserve memory for the kernel image resources")
Cc: stable(a)vger.kernel.org # v5.2+
---
arch/mips/dec/setup.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
linux-dec-prom-memblock-reserve.diff
Index: linux-3maxp/arch/mips/dec/setup.c
===================================================================
--- linux-3maxp.orig/arch/mips/dec/setup.c
+++ linux-3maxp/arch/mips/dec/setup.c
@@ -6,7 +6,7 @@
* for more details.
*
* Copyright (C) 1998 Harald Koerfgen
- * Copyright (C) 2000, 2001, 2002, 2003, 2005 Maciej W. Rozycki
+ * Copyright (C) 2000, 2001, 2002, 2003, 2005, 2020 Maciej W. Rozycki
*/
#include <linux/console.h>
#include <linux/export.h>
@@ -15,6 +15,7 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/irqnr.h>
+#include <linux/memblock.h>
#include <linux/param.h>
#include <linux/percpu-defs.h>
#include <linux/sched.h>
@@ -22,6 +23,7 @@
#include <linux/types.h>
#include <linux/pm.h>
+#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
@@ -29,7 +31,9 @@
#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
+#include <asm/page.h>
#include <asm/reboot.h>
+#include <asm/sections.h>
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/wbflush.h>
@@ -146,6 +150,9 @@ void __init plat_mem_setup(void)
ioport_resource.start = ~0UL;
ioport_resource.end = 0UL;
+
+ /* Stay away from the firmware working memory area for now. */
+ memblock_reserve(PHYS_OFFSET, __pa_symbol(&_text));
}
/*
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: 3a0cc8089ec0 - net_sched: commit action insertions together
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://arr-cki-prod-datawarehouse-public.s3.amazonaws.com/index.html?prefi…
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
s390x:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ xfstests - btrfs
🚧 ❌ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
⚡⚡⚡ Boot test
⚡⚡⚡ ACPI table test
⚡⚡⚡ ACPI enabled test
⚡⚡⚡ Podman system integration test - as root
⚡⚡⚡ Podman system integration test - as user
⚡⚡⚡ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory: fork_mem
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking: igmp conformance test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func - local
⚡⚡⚡ Networking route_func - forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns - transport
⚡⚡⚡ Networking ipsec: basic netns - tunnel
⚡⚡⚡ Libkcapi AF_ALG test
⚡⚡⚡ pciutils: update pci ids test
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: SCSI VPD
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ Firmware test suite
🚧 ⚡⚡⚡ jvm - jcstress tests
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ Ethernet drivers sanity
🚧 ⚡⚡⚡ Networking firewall: basic netfilter test
🚧 ⚡⚡⚡ audit: audit testsuite test
🚧 ⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ kdump - kexec_boot
Host 3:
✅ Boot test
✅ ACPI table test
✅ ACPI enabled test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
ppc64le:
Host 1:
✅ Boot test
🚧 ✅ kdump - sysrq-c
Host 2:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 3:
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
🚧 ✅ xfstests - btrfs
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
s390x:
Host 1:
✅ Boot test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
✅ stress: stress-ng
🚧 ✅ Storage blktests
🚧 ✅ Storage nvme - tcp
x86_64:
Host 1:
✅ Boot test
🚧 ✅ kdump - sysrq-c
🚧 ✅ kdump - file-load
Host 2:
✅ Boot test
✅ ACPI table test
✅ Podman system integration test - as root
✅ Podman system integration test - as user
✅ LTP
✅ Loopdev Sanity
✅ Memory: fork_mem
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Networking socket: fuzz
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func - local
✅ Networking route_func - forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns - transport
✅ Networking ipsec: basic netns - tunnel
✅ Libkcapi AF_ALG test
✅ pciutils: sanity smoke test
✅ pciutils: update pci ids test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ❌ Firmware test suite
🚧 ✅ jvm - jcstress tests
🚧 ✅ Memory function: kaslr
🚧 ✅ Ethernet drivers sanity
🚧 ✅ Networking firewall: basic netfilter test
🚧 ✅ audit: audit testsuite test
🚧 ✅ trace: ftrace/tracer
🚧 ✅ kdump - kexec_boot
Host 3:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
⚡⚡⚡ stress: stress-ng
🚧 ⚡⚡⚡ CPU: Frequency Driver Test
🚧 ⚡⚡⚡ CPU: Idle Test
🚧 ⚡⚡⚡ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ xfstests - ext4
✅ xfstests - xfs
✅ selinux-policy: serge-testsuite
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ CPU: Frequency Driver Test
🚧 ✅ xfstests - btrfs
🚧 ⚡⚡⚡ IOMMU boot test
🚧 ⚡⚡⚡ IPMI driver test
🚧 ⚡⚡⚡ IPMItool loop stress test
🚧 ⚡⚡⚡ power-management: cpupower/sanity test
🚧 ⚡⚡⚡ Storage blktests
🚧 ⚡⚡⚡ Storage nvme - tcp
Test sources: https://gitlab.com/cki-project/kernel-tests
💚 Pull requests are welcome for new tests or improvements to existing tests!
Aborted tests
-------------
Tests that didn't complete running successfully are marked with ⚡⚡⚡.
If this was caused by an infrastructure issue, we try to mark that
explicitly in the report.
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running yet are marked with ⏱.
Memory region reserved for the TZ is changed long back. Let's
update the same to align with the corret region. Its size also
increased to 4MB from 2MB.
Along with that, bump the Q6 region size to 85MB.
Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support")
Signed-off-by: Kathiravan T <kathirav(a)codeaurora.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 1aa8d8579463..ee7acddcbdfa 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -98,8 +98,8 @@ reserved-memory {
#size-cells = <2>;
ranges;
- tz: tz@48500000 {
- reg = <0x0 0x48500000 0x0 0x00200000>;
+ tz: memory@4a600000 {
+ reg = <0x0 0x4a600000 0x0 0x00400000>;
no-map;
};
@@ -109,7 +109,7 @@ smem_region: memory@4aa00000 {
};
q6_region: memory@4ab00000 {
- reg = <0x0 0x4ab00000 0x0 0x02800000>;
+ reg = <0x0 0x4ab00000 0x0 0x05500000>;
no-map;
};
};
base-commit: bbf5c979011a099af5dc76498918ed7df445635b
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
The console part of sisusbvga is broken vs. printk(). It uses in_atomic()
to detect contexts in which it cannot sleep despite the big fat comment in
preempt.h which says: Do not use in_atomic() in driver code.
in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which
means that spin/rw_lock held regions are not detected by it.
There is no way to make this work by handing context information through to
the driver and this only can be solved once the core printk infrastructure
supports sleepable console drivers.
Make it depend on BROKEN for now.
Fixes: 1bbb4f2035d9 ("[PATCH] USB: sisusb[vga] update")
Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de>
Cc: Thomas Winischhofer <thomas(a)winischhofer.net>
Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Cc: linux-usb(a)vger.kernel.org
Cc: stable(a)vger.kernel.org
---
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -16,7 +16,7 @@ config USB_SISUSBVGA
config USB_SISUSBVGA_CON
bool "Text console and mode switching support" if USB_SISUSBVGA
- depends on VT
+ depends on VT && BROKEN
select FONT_8x16
help
Say Y here if you want a VGA text console via the USB dongle or
From: Hauke Mehrtens <hauke(a)hauke-m.de>
[ Upstream commit f9317ae5523f99999fb54c513ebabbb2bc887ddf ]
The TX DMA channel data is accessed by the xrx200_start_xmit() and the
xrx200_tx_housekeeping() function from different threads. Make sure the
accesses are synchronized by acquiring the netif_tx_lock() in the
xrx200_tx_housekeeping() function too. This lock is acquired by the
kernel before calling xrx200_start_xmit().
Signed-off-by: Hauke Mehrtens <hauke(a)hauke-m.de>
Signed-off-by: David S. Miller <davem(a)davemloft.net>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/net/ethernet/lantiq_xrx200.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 635ff3a5dcfb3..51ed8a54d3801 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -245,6 +245,7 @@ static int xrx200_tx_housekeeping(struct napi_struct *napi, int budget)
int pkts = 0;
int bytes = 0;
+ netif_tx_lock(net_dev);
while (pkts < budget) {
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->tx_free];
@@ -268,6 +269,7 @@ static int xrx200_tx_housekeeping(struct napi_struct *napi, int budget)
net_dev->stats.tx_bytes += bytes;
netdev_completed_queue(ch->priv->net_dev, pkts, bytes);
+ netif_tx_unlock(net_dev);
if (netif_queue_stopped(net_dev))
netif_wake_queue(net_dev);
--
2.25.1
Dear Stable Maintainers,
Please consider cherry-picking:
commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to
link VDSO")
to linux-4.19.y.
It cherry picks cleanly and first landed in v5.2-rc1.
It allows us to more easily use ld.lld on arm32 for Android.
Also, please consider cherry-picking:
commit 29c623d64f0d ("ARM: 8939/1: kbuild: use correct nm executable")
to both linux-5.4.y and linux-4.19.y.
It cherry picks cleanly and first landed in v5.5-rc1.
It allows us to more easily use llvm-nm on arm32 for Android.
I've attached both backports as mbox files. Please let me know if it
would be preferable in the future for me to have one email per patch
being backported. I tested both locally, and the patches are passing
our presubmit testing in Android.
--
Thanks,
~Nick Desaulniers