Some more fixes that required backporting for 4.9. All these fixes
are related to CVEs though some of them don't seem to have any security
impact.
Ben.
--
Ben Hutchings, Software Developer Codethink Ltd
https://www.codethink.co.uk/ Dale House, 35 Dale Street
Manchester, M1 2HF, United Kingdom
[Why]
When change the connection status in a MST topology, mst device
which detect the event will send out CONNECTION_STATUS_NOTIFY messgae.
e.g. src-mst-mst-sst => src-mst (unplug) mst-sst
Currently, under the above case of unplugging device, ports which have
been allocated payloads and are no longer in the topology still occupy
time slots and recorded in proposed_vcpi[] of topology manager.
If we don't clean up the proposed_vcpi[], when code flow goes to try to
update payload table by calling drm_dp_update_payload_part1(), we will
fail at checking port validation due to there are ports with proposed
time slots but no longer in the mst topology. As the result of that, we
will also stop updating the DPCD payload table of down stream port.
[How]
While handling the CONNECTION_STATUS_NOTIFY message, add a detection to
see if the event indicates that a device is unplugged to an output port.
If the detection is true, then iterrate over all proposed_vcpi[] to
see whether a port of the proposed_vcpi[] is still in the topology or
not. If the port is invalid, set its num_slots to 0.
Thereafter, when try to update payload table by calling
drm_dp_update_payload_part1(), we can successfully update the DPCD
payload table of down stream port and clear the proposed_vcpi[] to NULL.
Changes since v1:(https://patchwork.kernel.org/patch/11275801/)
* Invert the conditional to reduce the indenting
Reviewed-by: Lyude Paul <lyude(a)redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin(a)amd.com>
Cc: stable(a)vger.kernel.org
---
drivers/gpu/drm/drm_dp_mst_topology.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 6e10f6235009..e37cd6ec6e36 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2321,7 +2321,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
{
struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
struct drm_dp_mst_port *port;
- int old_ddps, ret;
+ int old_ddps, old_input, ret, i;
u8 new_pdt;
bool dowork = false, create_connector = false;
@@ -2352,6 +2352,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
}
old_ddps = port->ddps;
+ old_input = port->input;
port->input = conn_stat->input_port;
port->mcs = conn_stat->message_capability_status;
port->ldps = conn_stat->legacy_device_plug_status;
@@ -2376,6 +2377,28 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
dowork = false;
}
+ if (!old_input && old_ddps != port->ddps && !port->ddps) {
+ for (i = 0; i < mgr->max_payloads; i++) {
+ struct drm_dp_vcpi *vcpi = mgr->proposed_vcpis[i];
+ struct drm_dp_mst_port *port_validated;
+
+ if (!vcpi)
+ continue;
+
+ port_validated =
+ container_of(vcpi, struct drm_dp_mst_port, vcpi);
+ port_validated =
+ drm_dp_mst_topology_get_port_validated(mgr, port_validated);
+ if (!port_validated) {
+ mutex_lock(&mgr->payload_lock);
+ vcpi->num_slots = 0;
+ mutex_unlock(&mgr->payload_lock);
+ } else {
+ drm_dp_mst_topology_put_port(port_validated);
+ }
+ }
+ }
+
if (port->connector)
drm_modeset_unlock(&mgr->base.lock);
else if (create_connector)
--
2.17.1
Hello,
We ran automated tests on a recent commit from this kernel tree:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Commit: fc79c2294846 - Linux 5.4.12-rc1
The results of these automated tests are provided below.
Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: FAILED
All kernel binaries, config files, and logs are available for download here:
https://artifacts.cki-project.org/pipelines/382061
One or more kernel tests failed:
x86_64:
❌ LTP
We hope that these logs can help you find the problem quickly. For the full
detail on our testing procedures, please scroll to the bottom of this message.
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Compile testing
---------------
We compiled the kernel for 3 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ xfstests: ext4
✅ xfstests: xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Podman system integration test (as root)
⚡⚡⚡ Podman system integration test (as user)
✅ LTP
⚡⚡⚡ Loopdev Sanity
⚡⚡⚡ Memory function: memfd_create
⚡⚡⚡ AMTU (Abstract Machine Test Utility)
⚡⚡⚡ Networking bridge: sanity
⚡⚡⚡ Ethernet drivers sanity
⚡⚡⚡ Networking MACsec: sanity
⚡⚡⚡ Networking socket: fuzz
⚡⚡⚡ Networking sctp-auth: sockopts test
⚡⚡⚡ Networking: igmp conformance test
⚡⚡⚡ Networking route: pmtu
⚡⚡⚡ Networking route_func: local
⚡⚡⚡ Networking route_func: forward
⚡⚡⚡ Networking TCP: keepalive test
⚡⚡⚡ Networking UDP: socket
⚡⚡⚡ Networking tunnel: geneve basic test
⚡⚡⚡ Networking tunnel: gre basic
⚡⚡⚡ L2TP basic test
⚡⚡⚡ Networking tunnel: vxlan basic
⚡⚡⚡ Networking ipsec: basic netns transport
⚡⚡⚡ Networking ipsec: basic netns tunnel
⚡⚡⚡ audit: audit testsuite test
⚡⚡⚡ httpd: mod_ssl smoke sanity
⚡⚡⚡ tuned: tune-processes-through-perf
⚡⚡⚡ ALSA PCM loopback test
⚡⚡⚡ ALSA Control (mixer) Userspace Element test
⚡⚡⚡ storage: SCSI VPD
⚡⚡⚡ trace: ftrace/tracer
🚧 ⚡⚡⚡ CIFS Connectathon
🚧 ⚡⚡⚡ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm test suite
🚧 ⚡⚡⚡ Memory function: kaslr
🚧 ⚡⚡⚡ LTP: openposix test suite
🚧 ⚡⚡⚡ Networking vnic: ipvlan/basic
🚧 ⚡⚡⚡ iotop: sanity
🚧 ⚡⚡⚡ Usex - version 1.9-29
🚧 ⚡⚡⚡ storage: dm/common
Host 3:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP
✅ Loopdev Sanity
⏱ Memory function: memfd_create
⏱ AMTU (Abstract Machine Test Utility)
⏱ Networking bridge: sanity
⏱ Ethernet drivers sanity
⏱ Networking MACsec: sanity
⏱ Networking socket: fuzz
⏱ Networking sctp-auth: sockopts test
⏱ Networking: igmp conformance test
⏱ Networking route: pmtu
⏱ Networking route_func: local
⏱ Networking route_func: forward
⏱ Networking TCP: keepalive test
⏱ Networking UDP: socket
⏱ Networking tunnel: geneve basic test
⏱ Networking tunnel: gre basic
⏱ L2TP basic test
⏱ Networking tunnel: vxlan basic
⏱ Networking ipsec: basic netns transport
⏱ Networking ipsec: basic netns tunnel
⏱ audit: audit testsuite test
⏱ httpd: mod_ssl smoke sanity
⏱ tuned: tune-processes-through-perf
⏱ ALSA PCM loopback test
⏱ ALSA Control (mixer) Userspace Element test
⏱ storage: SCSI VPD
⏱ trace: ftrace/tracer
⏱ CIFS Connectathon
⏱ POSIX pjd-fstest suites
⏱ jvm test suite
⏱ Memory function: kaslr
⏱ LTP: openposix test suite
⏱ Networking vnic: ipvlan/basic
⏱ iotop: sanity
⏱ Usex - version 1.9-29
⏱ storage: dm/common
ppc64le:
Host 1:
✅ Boot test
✅ xfstests: ext4
✅ xfstests: xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking route: pmtu
✅ Networking route_func: local
✅ Networking route_func: forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns tunnel
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ✅ jvm test suite
🚧 ✅ Memory function: kaslr
🚧 ✅ LTP: openposix test suite
🚧 ✅ Networking vnic: ipvlan/basic
🚧 ✅ iotop: sanity
🚧 ✅ Usex - version 1.9-29
🚧 ✅ storage: dm/common
x86_64:
Host 1:
✅ Boot test
✅ xfstests: ext4
✅ xfstests: xfs
✅ selinux-policy: serge-testsuite
✅ lvm thinp sanity
✅ storage: software RAID testing
✅ stress: stress-ng
🚧 ✅ IOMMU boot test
🚧 ✅ IPMI driver test
🚧 ✅ IPMItool loop stress test
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Storage SAN device stress - megaraid_sas
Host 3:
✅ Boot test
✅ Storage SAN device stress - mpt3sas driver
Host 4:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
❌ LTP
✅ Loopdev Sanity
✅ Memory function: memfd_create
✅ AMTU (Abstract Machine Test Utility)
✅ Networking bridge: sanity
✅ Ethernet drivers sanity
✅ Networking MACsec: sanity
✅ Networking socket: fuzz
✅ Networking sctp-auth: sockopts test
✅ Networking: igmp conformance test
✅ Networking route: pmtu
✅ Networking route_func: local
✅ Networking route_func: forward
✅ Networking TCP: keepalive test
✅ Networking UDP: socket
✅ Networking tunnel: geneve basic test
✅ Networking tunnel: gre basic
✅ L2TP basic test
✅ Networking tunnel: vxlan basic
✅ Networking ipsec: basic netns transport
✅ Networking ipsec: basic netns tunnel
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ tuned: tune-processes-through-perf
✅ pciutils: sanity smoke test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ storage: SCSI VPD
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
🚧 ⚡⚡⚡ jvm test suite
🚧 ❌ Memory function: kaslr
🚧 ✅ LTP: openposix test suite
🚧 ✅ Networking vnic: ipvlan/basic
🚧 ✅ iotop: sanity
🚧 ✅ Usex - version 1.9-29
🚧 ✅ storage: dm/common
Test sources: https://github.com/CKI-project/tests-beaker
💚 Pull requests are welcome for new tests or improvements to existing tests!
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running are marked with ⏱. Reports for non-upstream kernels have
a Beaker recipe linked to next to each host.
This patch fixes a regression on setting up asynchronous commands to use
external trigger sources when board-specific routing information is
missing.
`ni_find_device_routes()` (called via `ni_assign_device_routes()`) finds
the table of register values for the device family and the set of valid
routes for the specific board. If both are found,
`tables->route_values` is set to point to the table of register values
for the device family and `tables->valid_routes` is set to point to the
list of valid routes for the specific board. If either is not found,
both `tables->route_values` and `tables->valid_routes` are left set at
their initial null values (initialized by `ni_assign_device_routes()`)
and the function returns `-ENODATA`.
Returning an error results in some routing functionality being disabled.
Unfortunately, leaving `table->route_values` set to `NULL` also breaks
the setting up of asynchronous commands that are configured to use
external trigger sources. Calls to `ni_check_trigger_arg()` or
`ni_check_trigger_arg_roffs()` while checking the asynchronous command
set-up would result in a null pointer dereference if
`table->route_values` is `NULL`. The null pointer dereference is fixed
in another patch, but it now results in failure to set up the
asynchronous command. That is a regression from the behavior prior to
commit 347e244884c3 ("staging: comedi: tio: implement global tio/ctr
routing") and commit 56d0b826d39f ("staging: comedi: ni_mio_common:
implement new routing for TRIG_EXT").
Change `ni_find_device_routes()` to set `tables->route_values` and/or
`tables->valid_routes` to valid information even if the other one can
only be set to `NULL` due to missing information. The function will
still return an error in that case. This should result in
`tables->valid_routes` being valid for all currently supported device
families even if the board-specific routing information is missing.
That should be enough to fix the regression on setting up asynchronous
commands to use external triggers for boards with missing routing
information.
Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing")
Fixes: 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT").
Cc: <stable(a)vger.kernel.org> # 4.20+
Cc: Spencer E. Olson <olsonse(a)umich.edu>
Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk>
---
drivers/staging/comedi/drivers/ni_routes.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_routes.c b/drivers/staging/comedi/drivers/ni_routes.c
index 9627bd1d2a78..8f398b30f5bf 100644
--- a/drivers/staging/comedi/drivers/ni_routes.c
+++ b/drivers/staging/comedi/drivers/ni_routes.c
@@ -72,9 +72,6 @@ static int ni_find_device_routes(const char *device_family,
}
}
- if (!rv)
- return -ENODATA;
-
/* Second, find the set of routes valid for this device. */
for (i = 0; ni_device_routes_list[i]; ++i) {
if (memcmp(ni_device_routes_list[i]->device, board_name,
@@ -84,12 +81,12 @@ static int ni_find_device_routes(const char *device_family,
}
}
- if (!dr)
- return -ENODATA;
-
tables->route_values = rv;
tables->valid_routes = dr;
+ if (!rv || !dr)
+ return -ENODATA;
+
return 0;
}
--
2.24.1
In `ni_find_route_source()`, `tables->route_values` gets dereferenced.
However it is possible that `tables->route_values` is `NULL`, leading to
a null pointer dereference. `tables->route_values` will be `NULL` if
the call to `ni_assign_device_routes()` during board initialization
returned an error due to missing device family routing information or
missing board-specific routing information. For example, there is
currently no board-specific routing information provided for the
PCIe-6251 board and several other boards, so those are affected by this
bug.
The bug is triggered when `ni_find_route_source()` is called via
`ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` when checking
the arguments for setting up asynchronous commands. Fix it by returning
`-EINVAL` if `tables->route_values` is `NULL`.
Even with this fix, setting up asynchronous commands to use external
trigger sources for boards with missing routing information will still
fail gracefully. Since `ni_find_route_source()` only depends on the
device family routing information, it would be better if that was made
available even if the board-specific routing information is missing.
That will be addressed by another patch.
Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information")
Cc: <stable(a)vger.kernel.org> # 4.20+
Cc: Spencer E. Olson <olsonse(a)umich.edu>
Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk>
---
drivers/staging/comedi/drivers/ni_routes.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/staging/comedi/drivers/ni_routes.c b/drivers/staging/comedi/drivers/ni_routes.c
index 673d732dcb8f..9627bd1d2a78 100644
--- a/drivers/staging/comedi/drivers/ni_routes.c
+++ b/drivers/staging/comedi/drivers/ni_routes.c
@@ -487,6 +487,9 @@ int ni_find_route_source(const u8 src_sel_reg_value, int dest,
{
int src;
+ if (!tables->route_values)
+ return -EINVAL;
+
dest = B(dest); /* subtract NI names offset */
/* ensure we are not going to under/over run the route value table */
if (dest < 0 || dest >= NI_NUM_NAMES)
--
2.24.1
Some more fixes that required backporting for 4.14. All these fixes
are related to CVEs though some of them don't seem to have any security
impact.
Ben.
--
Ben Hutchings, Software Developer Codethink Ltd
https://www.codethink.co.uk/ Dale House, 35 Dale Street
Manchester, M1 2HF, United Kingdom