July 2019 - Linux-stable-mirror

patch "usb: pci-quirks: Correct AMD PLL quirk detection" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: pci-quirks: Correct AMD PLL quirk detection to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f3dccdaade4118070a3a47bef6b18321431f9ac6 Mon Sep 17 00:00:00 2001 From: Ryan Kennedy <ryan5544(a)gmail.com> Date: Thu, 4 Jul 2019 11:35:28 -0400 Subject: usb: pci-quirks: Correct AMD PLL quirk detection The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544(a)gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable(a)vger.kernel.org> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 3ce71cbfbb58..ad05c27b3a7b 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -205,7 +205,7 @@ int usb_amd_find_chipset_info(void) { unsigned long flags; struct amd_chipset_info info; - int ret; + int need_pll_quirk = 0; spin_lock_irqsave(&amd_lock, flags); @@ -219,21 +219,28 @@ int usb_amd_find_chipset_info(void) spin_unlock_irqrestore(&amd_lock, flags); if (!amd_chipset_sb_type_init(&info)) { - ret = 0; goto commit; } - /* Below chipset generations needn't enable AMD PLL quirk */ - if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN || - info.sb_type.gen == AMD_CHIPSET_SB600 || - info.sb_type.gen == AMD_CHIPSET_YANGTZE || - (info.sb_type.gen == AMD_CHIPSET_SB700 && - info.sb_type.rev > 0x3b)) { + switch (info.sb_type.gen) { + case AMD_CHIPSET_SB700: + need_pll_quirk = info.sb_type.rev <= 0x3B; + break; + case AMD_CHIPSET_SB800: + case AMD_CHIPSET_HUDSON2: + case AMD_CHIPSET_BOLTON: + need_pll_quirk = 1; + break; + default: + need_pll_quirk = 0; + break; + } + + if (!need_pll_quirk) { if (info.smbus_dev) { pci_dev_put(info.smbus_dev); info.smbus_dev = NULL; } - ret = 0; goto commit; } @@ -252,7 +259,7 @@ int usb_amd_find_chipset_info(void) } } - ret = info.probe_result = 1; + need_pll_quirk = info.probe_result = 1; printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); commit: @@ -263,7 +270,7 @@ int usb_amd_find_chipset_info(void) /* Mark that we where here */ amd_chipset.probe_count++; - ret = amd_chipset.probe_result; + need_pll_quirk = amd_chipset.probe_result; spin_unlock_irqrestore(&amd_lock, flags); @@ -277,7 +284,7 @@ int usb_amd_find_chipset_info(void) spin_unlock_irqrestore(&amd_lock, flags); } - return ret; + return need_pll_quirk; } EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); -- 2.22.0

5 years, 5 months

1
0
0 0

[PATCH] media: vivid: fix device init when no_error_inj=1 and fb disabled

by Guillaume Tucker

Add an extra condition to add the video output control class when the device has some hdmi outputs defined. This is required to then always be able to add the display present control, which is enabled when there are some hdmi outputs. This fixes the corner case where no_error_inj is enabled and the device has no frame buffer but some hdmi outputs, as otherwise the video output control class would be added anyway. Without this fix, the sanity checks fail in v4l2_ctrl_new() as name is NULL. Fixes: c533435ffb91 ("media: vivid: add display present control") Cc: stable(a)vger.kernel.org Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> --- drivers/media/platform/vivid/vivid-ctrls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/vivid/vivid-ctrls.c b/drivers/media/platform/vivid/vivid-ctrls.c index 3e916c8befb7..7a52f585cab7 100644 --- a/drivers/media/platform/vivid/vivid-ctrls.c +++ b/drivers/media/platform/vivid/vivid-ctrls.c @@ -1473,7 +1473,7 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap, v4l2_ctrl_handler_init(hdl_vid_cap, 55); v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_class, NULL); v4l2_ctrl_handler_init(hdl_vid_out, 26); - if (!no_error_inj || dev->has_fb) + if (!no_error_inj || dev->has_fb || dev->num_hdmi_outputs) v4l2_ctrl_new_custom(hdl_vid_out, &vivid_ctrl_class, NULL); v4l2_ctrl_handler_init(hdl_vbi_cap, 21); v4l2_ctrl_new_custom(hdl_vbi_cap, &vivid_ctrl_class, NULL); -- 2.20.1

5 years, 5 months

2
1
0 0

[PATCH] perf/x86/intel: Fix SLOTS pebs event constraint

by kan.liang＠linux.intel.com

From: Kan Liang <kan.liang(a)linux.intel.com> Sampling SLOTS event and ref-cycles event in a group on Icelake gives EINVAL. SLOTS event is the event stands for the fixed counter 3, not fixed counter 2. Wrong mask was set to SLOTS event in intel_icl_pebs_event_constraints[]. Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support") Reported-by: Andi Kleen <ak(a)linux.intel.com> Signed-off-by: Kan Liang <kan.liang(a)linux.intel.com> Cc: stable(a)vger.kernel.org --- arch/x86/events/intel/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 505c73dc6a73..6601b8759c92 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -851,7 +851,7 @@ struct event_constraint intel_skl_pebs_event_constraints[] = { struct event_constraint intel_icl_pebs_event_constraints[] = { INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x100000000ULL), /* INST_RETIRED.PREC_DIST */ - INTEL_FLAGS_UEVENT_CONSTRAINT(0x0400, 0x400000000ULL), /* SLOTS */ + INTEL_FLAGS_UEVENT_CONSTRAINT(0x0400, 0x800000000ULL), /* SLOTS */ INTEL_PLD_CONSTRAINT(0x1cd, 0xff), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x1d0, 0xf), /* MEM_INST_RETIRED.LOAD */ -- 2.17.1

5 years, 5 months

2
1
0 0

patch "staging: wilc1000: flush the workqueue before deinit the host" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: wilc1000: flush the workqueue before deinit the host to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From fb2b055b7e6e44efda737c7c92f46c0868bb04e5 Mon Sep 17 00:00:00 2001 From: Adham Abozaeid <adham.abozaeid(a)microchip.com> Date: Mon, 22 Jul 2019 21:38:44 +0000 Subject: staging: wilc1000: flush the workqueue before deinit the host Before deinitializing the host interface, the workqueue should be flushed to handle any pending deferred work Signed-off-by: Adham Abozaeid <adham.abozaeid(a)microchip.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20190722213837.21952-1-adham.abozaeid@microchip.c… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index d72fdd333050..736eedef23b6 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -1969,6 +1969,7 @@ void wilc_deinit_host_int(struct net_device *net) priv->p2p_listen_state = false; + flush_workqueue(vif->wilc->hif_workqueue); mutex_destroy(&priv->scan_req_lock); ret = wilc_deinit(vif); -- 2.22.0

5 years, 5 months

1
0
0 0

patch "staging: gasket: apex: fix copy-paste typo" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: gasket: apex: fix copy-paste typo to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 66665bb9979246729562a09fcdbb101c83127989 Mon Sep 17 00:00:00 2001 From: Ivan Bornyakov <brnkv.i1(a)gmail.com> Date: Wed, 10 Jul 2019 23:45:18 +0300 Subject: staging: gasket: apex: fix copy-paste typo In sysfs_show() case-branches ATTR_KERNEL_HIB_PAGE_TABLE_SIZE and ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE do the same. It looks like copy-paste mistake. Signed-off-by: Ivan Bornyakov <brnkv.i1(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20190710204518.16814-1-brnkv.i1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/gasket/apex_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/gasket/apex_driver.c b/drivers/staging/gasket/apex_driver.c index 2be45ee9d061..464648ee2036 100644 --- a/drivers/staging/gasket/apex_driver.c +++ b/drivers/staging/gasket/apex_driver.c @@ -532,7 +532,7 @@ static ssize_t sysfs_show(struct device *device, struct device_attribute *attr, break; case ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE: ret = scnprintf(buf, PAGE_SIZE, "%u\n", - gasket_page_table_num_entries( + gasket_page_table_num_simple_entries( gasket_dev->page_table[0])); break; case ATTR_KERNEL_HIB_NUM_ACTIVE_PAGES: -- 2.22.0

5 years, 5 months

1
0
0 0

patch "Staging: fbtft: Fix probing of gpio descriptor" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Staging: fbtft: Fix probing of gpio descriptor to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From dbc4f989c878fe101fb7920e9609e8ec44e097cd Mon Sep 17 00:00:00 2001 From: Phil Reid <preid(a)electromag.com.au> Date: Tue, 16 Jul 2019 08:24:36 +0800 Subject: Staging: fbtft: Fix probing of gpio descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Conversion to use gpio descriptors broke all gpio lookups as devm_gpiod_get_index was converted to use dev->driver->name for the gpio name lookup. Fix this by using the name param. In addition gpiod_get post-fixes the -gpios to the name so that shouldn't be included in the call. However this then breaks the of_find_property call to see if the gpio entry exists as all fbtft treats all gpios as optional. So use devm_gpiod_get_index_optional instead which achieves the same thing and is simpler. Nishad confirmed the changes where only ever compile tested. Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de> Tested-by: Jan Sebastian Götte <linux(a)jaseg.net> Signed-off-by: Phil Reid <preid(a)electromag.com.au> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/1563236677-5045-2-git-send-email-preid@electromag… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/fbtft/fbtft-core.c | 39 ++++++++++++++---------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index 7cbc1bdd2d8a..b963cccdc3f6 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -76,21 +76,18 @@ static int fbtft_request_one_gpio(struct fbtft_par *par, struct gpio_desc **gpiop) { struct device *dev = par->info->device; - struct device_node *node = dev->of_node; int ret = 0; - if (of_find_property(node, name, NULL)) { - *gpiop = devm_gpiod_get_index(dev, dev->driver->name, index, - GPIOD_OUT_HIGH); - if (IS_ERR(*gpiop)) { - ret = PTR_ERR(*gpiop); - dev_err(dev, - "Failed to request %s GPIO:%d\n", name, ret); - return ret; - } - fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n", - __func__, name); + *gpiop = devm_gpiod_get_index_optional(dev, name, index, + GPIOD_OUT_HIGH); + if (IS_ERR(*gpiop)) { + ret = PTR_ERR(*gpiop); + dev_err(dev, + "Failed to request %s GPIO: %d\n", name, ret); + return ret; } + fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n", + __func__, name); return ret; } @@ -103,34 +100,34 @@ static int fbtft_request_gpios_dt(struct fbtft_par *par) if (!par->info->device->of_node) return -EINVAL; - ret = fbtft_request_one_gpio(par, "reset-gpios", 0, &par->gpio.reset); + ret = fbtft_request_one_gpio(par, "reset", 0, &par->gpio.reset); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "dc-gpios", 0, &par->gpio.dc); + ret = fbtft_request_one_gpio(par, "dc", 0, &par->gpio.dc); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "rd-gpios", 0, &par->gpio.rd); + ret = fbtft_request_one_gpio(par, "rd", 0, &par->gpio.rd); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "wr-gpios", 0, &par->gpio.wr); + ret = fbtft_request_one_gpio(par, "wr", 0, &par->gpio.wr); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "cs-gpios", 0, &par->gpio.cs); + ret = fbtft_request_one_gpio(par, "cs", 0, &par->gpio.cs); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "latch-gpios", 0, &par->gpio.latch); + ret = fbtft_request_one_gpio(par, "latch", 0, &par->gpio.latch); if (ret) return ret; for (i = 0; i < 16; i++) { - ret = fbtft_request_one_gpio(par, "db-gpios", i, + ret = fbtft_request_one_gpio(par, "db", i, &par->gpio.db[i]); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "led-gpios", i, + ret = fbtft_request_one_gpio(par, "led", i, &par->gpio.led[i]); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "aux-gpios", i, + ret = fbtft_request_one_gpio(par, "aux", i, &par->gpio.aux[i]); if (ret) return ret; -- 2.22.0

5 years, 5 months

1
0
0 0

patch "Staging: fbtft: Fix reset assertion when using gpio descriptor" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Staging: fbtft: Fix reset assertion when using gpio descriptor to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From b918d1c2706619cb0712a61cc8c05148b68b24b2 Mon Sep 17 00:00:00 2001 From: Phil Reid <preid(a)electromag.com.au> Date: Tue, 16 Jul 2019 08:24:37 +0800 Subject: Staging: fbtft: Fix reset assertion when using gpio descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Typically gpiod_set_value calls would assert the reset line and then release it using the symantics of: gpiod_set_value(par->gpio.reset, 0); ... delay gpiod_set_value(par->gpio.reset, 1); And the gpio binding would specify the polarity. Prior to conversion to gpiod calls the polarity in the DT was ignored and assumed to be active low. Fix it so that DT polarity is respected. Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de> Tested-by: Jan Sebastian Götte <linux(a)jaseg.net> Signed-off-by: Phil Reid <preid(a)electromag.com.au> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/1563236677-5045-3-git-send-email-preid@electromag… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/fbtft/fbtft-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index b963cccdc3f6..c3179cc847f8 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -231,9 +231,9 @@ static void fbtft_reset(struct fbtft_par *par) if (!par->gpio.reset) return; fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__); - gpiod_set_value_cansleep(par->gpio.reset, 0); - usleep_range(20, 40); gpiod_set_value_cansleep(par->gpio.reset, 1); + usleep_range(20, 40); + gpiod_set_value_cansleep(par->gpio.reset, 0); msleep(120); } -- 2.22.0

5 years, 5 months

1
0
0 0

[PATCH] ALSA: hda - Add a conexant codec entry to let mute led work

by Hui Wang

This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable(a)vger.kernel.org Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 4f8d0845ee1e..f299f137eaea 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1083,6 +1083,7 @@ static int patch_conexant_auto(struct hda_codec *codec) */ static const struct hda_device_id snd_hda_id_conexant[] = { + HDA_CODEC_ENTRY(0x14f11f86, "CX8070", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f12008, "CX8200", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f15045, "CX20549 (Venice)", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f15047, "CX20551 (Waikiki)", patch_conexant_auto), -- 2.17.1

5 years, 5 months

2
1
0 0

[PATCH] sd_zbc: Fix report zones buffer allocation

by Damien Le Moal

commit b091ac616846a1da75b1f2566b41255ce7f0e0a6 upstream. During disk scan and revalidation done with sd_revalidate(), the zones of a zoned disk are checked using the helper function blk_revalidate_disk_zones() if a configuration change is detected (change in the number of zones or zone size). The function blk_revalidate_disk_zones() issues report_zones calls that are very large, that is, to obtain zone information for all zones of the disk with a single command. The size of the report zones command buffer necessary for such large request generally is lower than the disk max_hw_sectors and KMALLOC_MAX_SIZE (4MB) and succeeds on boot (no memory fragmentation), but often fail at run time (e.g. hot-plug event). This causes the disk revalidation to fail and the disk capacity to be changed to 0. This problem can be avoided by using vmalloc() instead of kmalloc() for the buffer allocation. To limit the amount of memory to be allocated, this patch also introduces the arbitrary SD_ZBC_REPORT_MAX_ZONES maximum number of zones to report with a single report zones command. This limit may be lowered further to satisfy the disk max_hw_sectors limit. Finally, to ensure that the vmalloc-ed buffer can always be mapped in a request, the buffer size is further limited to at most queue_max_segments() pages, allowing successful mapping of the buffer even in the worst case scenario where none of the buffer pages are contiguous. Fixes: 515ce6061312 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation") Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable(a)vger.kernel.org # 5.1.x Cc: stable(a)vger.kernel.org # 5.2.x Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal(a)wdc.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> --- drivers/scsi/sd_zbc.c | 104 ++++++++++++++++++++++++++++++------------ 1 file changed, 75 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index a340af797a85..a9f3a8d77ee7 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -23,6 +23,8 @@ */ #include <linux/blkdev.h> +#include <linux/vmalloc.h> +#include <linux/sched/mm.h> #include <asm/unaligned.h> @@ -64,7 +66,7 @@ static void sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf, /** * sd_zbc_do_report_zones - Issue a REPORT ZONES scsi command. * @sdkp: The target disk - * @buf: Buffer to use for the reply + * @buf: vmalloc-ed buffer to use for the reply * @buflen: the buffer size * @lba: Start LBA of the report * @partial: Do partial report @@ -93,7 +95,6 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf, put_unaligned_be32(buflen, &cmd[10]); if (partial) cmd[14] = ZBC_REPORT_ZONE_PARTIAL; - memset(buf, 0, buflen); result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, buf, buflen, &sshdr, @@ -117,6 +118,53 @@ static int sd_zbc_do_report_zones(struct scsi_disk *sdkp, unsigned char *buf, return 0; } +/* + * Maximum number of zones to get with one report zones command. + */ +#define SD_ZBC_REPORT_MAX_ZONES 8192U + +/** + * Allocate a buffer for report zones reply. + * @sdkp: The target disk + * @nr_zones: Maximum number of zones to report + * @buflen: Size of the buffer allocated + * + * Try to allocate a reply buffer for the number of requested zones. + * The size of the buffer allocated may be smaller than requested to + * satify the device constraint (max_hw_sectors, max_segments, etc). + * + * Return the address of the allocated buffer and update @buflen with + * the size of the allocated buffer. + */ +static void *sd_zbc_alloc_report_buffer(struct scsi_disk *sdkp, + unsigned int nr_zones, size_t *buflen) +{ + struct request_queue *q = sdkp->disk->queue; + size_t bufsize; + void *buf; + + /* + * Report zone buffer size should be at most 64B times the number of + * zones requested plus the 64B reply header, but should be at least + * SECTOR_SIZE for ATA devices. + * Make sure that this size does not exceed the hardware capabilities. + * Furthermore, since the report zone command cannot be split, make + * sure that the allocated buffer can always be mapped by limiting the + * number of pages allocated to the HBA max segments limit. + */ + nr_zones = min(nr_zones, SD_ZBC_REPORT_MAX_ZONES); + bufsize = roundup((nr_zones + 1) * 64, 512); + bufsize = min_t(size_t, bufsize, + queue_max_hw_sectors(q) << SECTOR_SHIFT); + bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT); + + buf = vzalloc(bufsize); + if (buf) + *buflen = bufsize; + + return buf; +} + /** * sd_zbc_report_zones - Disk report zones operation. * @disk: The target disk @@ -132,30 +180,23 @@ int sd_zbc_report_zones(struct gendisk *disk, sector_t sector, gfp_t gfp_mask) { struct scsi_disk *sdkp = scsi_disk(disk); - unsigned int i, buflen, nrz = *nr_zones; + unsigned int i, nrz = *nr_zones; unsigned char *buf; - size_t offset = 0; + size_t buflen = 0, offset = 0; int ret = 0; if (!sd_is_zoned(sdkp)) /* Not a zoned device */ return -EOPNOTSUPP; - /* - * Get a reply buffer for the number of requested zones plus a header, - * without exceeding the device maximum command size. For ATA disks, - * buffers must be aligned to 512B. - */ - buflen = min(queue_max_hw_sectors(disk->queue) << 9, - roundup((nrz + 1) * 64, 512)); - buf = kmalloc(buflen, gfp_mask); + buf = sd_zbc_alloc_report_buffer(sdkp, nrz, &buflen); if (!buf) return -ENOMEM; ret = sd_zbc_do_report_zones(sdkp, buf, buflen, sectors_to_logical(sdkp->device, sector), true); if (ret) - goto out_free_buf; + goto out; nrz = min(nrz, get_unaligned_be32(&buf[0]) / 64); for (i = 0; i < nrz; i++) { @@ -166,8 +207,8 @@ int sd_zbc_report_zones(struct gendisk *disk, sector_t sector, *nr_zones = nrz; -out_free_buf: - kfree(buf); +out: + kvfree(buf); return ret; } @@ -301,8 +342,6 @@ static int sd_zbc_check_zoned_characteristics(struct scsi_disk *sdkp, return 0; } -#define SD_ZBC_BUF_SIZE 131072U - /** * sd_zbc_check_zones - Check the device capacity and zone sizes * @sdkp: Target disk @@ -318,22 +357,28 @@ static int sd_zbc_check_zoned_characteristics(struct scsi_disk *sdkp, */ static int sd_zbc_check_zones(struct scsi_disk *sdkp, u32 *zblocks) { + size_t bufsize, buflen; + unsigned int noio_flag; u64 zone_blocks = 0; sector_t max_lba, block = 0; unsigned char *buf; unsigned char *rec; - unsigned int buf_len; - unsigned int list_length; int ret; u8 same; + /* Do all memory allocations as if GFP_NOIO was specified */ + noio_flag = memalloc_noio_save(); + /* Get a buffer */ - buf = kmalloc(SD_ZBC_BUF_SIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; + buf = sd_zbc_alloc_report_buffer(sdkp, SD_ZBC_REPORT_MAX_ZONES, + &bufsize); + if (!buf) { + ret = -ENOMEM; + goto out; + } /* Do a report zone to get max_lba and the same field */ - ret = sd_zbc_do_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, 0, false); + ret = sd_zbc_do_report_zones(sdkp, buf, bufsize, 0, false); if (ret) goto out_free; @@ -369,12 +414,12 @@ static int sd_zbc_check_zones(struct scsi_disk *sdkp, u32 *zblocks) do { /* Parse REPORT ZONES header */ - list_length = get_unaligned_be32(&buf[0]) + 64; + buflen = min_t(size_t, get_unaligned_be32(&buf[0]) + 64, + bufsize); rec = buf + 64; - buf_len = min(list_length, SD_ZBC_BUF_SIZE); /* Parse zone descriptors */ - while (rec < buf + buf_len) { + while (rec < buf + buflen) { u64 this_zone_blocks = get_unaligned_be64(&rec[8]); if (zone_blocks == 0) { @@ -390,8 +435,8 @@ static int sd_zbc_check_zones(struct scsi_disk *sdkp, u32 *zblocks) } if (block < sdkp->capacity) { - ret = sd_zbc_do_report_zones(sdkp, buf, SD_ZBC_BUF_SIZE, - block, true); + ret = sd_zbc_do_report_zones(sdkp, buf, bufsize, block, + true); if (ret) goto out_free; } @@ -422,7 +467,8 @@ static int sd_zbc_check_zones(struct scsi_disk *sdkp, u32 *zblocks) } out_free: - kfree(buf); + memalloc_noio_restore(noio_flag); + kvfree(buf); return ret; } -- 2.21.0

5 years, 5 months

1
1
0 0

FAILED: patch "[PATCH] block: Limit zone array allocation size" failed to apply to 5.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 26202928fafad8bda8b478edb7e62c885be623d7 Mon Sep 17 00:00:00 2001 From: Damien Le Moal <damien.lemoal(a)wdc.com> Date: Mon, 1 Jul 2019 14:09:18 +0900 Subject: [PATCH] block: Limit zone array allocation size Limit the size of the struct blk_zone array used in blk_revalidate_disk_zones() to avoid memory allocation failures leading to disk revalidation failure. Also further reduce the likelyhood of such failures by using kvcalloc() (that is vmalloc()) instead of allocating contiguous pages with alloc_pages(). Fixes: 515ce6061312 ("scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation") Fixes: e76239a3748c ("block: add a report_zones method") Cc: stable(a)vger.kernel.org Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal(a)wdc.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/block/blk-zoned.c b/block/blk-zoned.c index 58ced170b424..6c503824ba3f 100644 --- a/block/blk-zoned.c +++ b/block/blk-zoned.c @@ -14,6 +14,8 @@ #include <linux/rbtree.h> #include <linux/blkdev.h> #include <linux/blk-mq.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> #include <linux/sched/mm.h> #include "blk.h" @@ -371,22 +373,25 @@ static inline unsigned long *blk_alloc_zone_bitmap(int node, * Allocate an array of struct blk_zone to get nr_zones zone information. * The allocated array may be smaller than nr_zones. */ -static struct blk_zone *blk_alloc_zones(int node, unsigned int *nr_zones) +static struct blk_zone *blk_alloc_zones(unsigned int *nr_zones) { - size_t size = *nr_zones * sizeof(struct blk_zone); - struct page *page; - int order; - - for (order = get_order(size); order >= 0; order--) { - page = alloc_pages_node(node, GFP_NOIO | __GFP_ZERO, order); - if (page) { - *nr_zones = min_t(unsigned int, *nr_zones, - (PAGE_SIZE << order) / sizeof(struct blk_zone)); - return page_address(page); - } + struct blk_zone *zones; + size_t nrz = min(*nr_zones, BLK_ZONED_REPORT_MAX_ZONES); + + /* + * GFP_KERNEL here is meaningless as the caller task context has + * the PF_MEMALLOC_NOIO flag set in blk_revalidate_disk_zones() + * with memalloc_noio_save(). + */ + zones = kvcalloc(nrz, sizeof(struct blk_zone), GFP_KERNEL); + if (!zones) { + *nr_zones = 0; + return NULL; } - return NULL; + *nr_zones = nrz; + + return zones; } void blk_queue_free_zone_bitmaps(struct request_queue *q) @@ -448,7 +453,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk) /* Get zone information and initialize seq_zones_bitmap */ rep_nr_zones = nr_zones; - zones = blk_alloc_zones(q->node, &rep_nr_zones); + zones = blk_alloc_zones(&rep_nr_zones); if (!zones) goto out; @@ -487,8 +492,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk) out: memalloc_noio_restore(noio_flag); - free_pages((unsigned long)zones, - get_order(rep_nr_zones * sizeof(struct blk_zone))); + kvfree(zones); kfree(seq_zones_wlock); kfree(seq_zones_bitmap); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 05036e3e3458..1ef375dafb1c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -344,6 +344,11 @@ struct queue_limits { #ifdef CONFIG_BLK_DEV_ZONED +/* + * Maximum number of zones to report with a single report zones command. + */ +#define BLK_ZONED_REPORT_MAX_ZONES 8192U + extern unsigned int blkdev_nr_zones(struct block_device *bdev); extern int blkdev_report_zones(struct block_device *bdev, sector_t sector, struct blk_zone *zones,

5 years, 5 months

2
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2019